325C L 325C - dizv3061bgivy.cloudfront.net · Ease of Operation Compact Multipro monitor enhances...

325C L325C LNHydraulic Excavators

®

Cat® 3126B ATAAC diesel engineGross power 140 kW/189 hpNet power 128 kW/173 hp

Operating weight range 26 500 to 29 000 kgTravel speed 5.0/3.1 km/hDrawbar pull 236 kN

325C L and 325C LN Hydraulic ExcavatorsThe C Series incorporates innovations for improved performance and versatility.

EngineCat 3126B ATAAC diesel engine is built for performance, durability,excellent fuel economy, low soundlevels and it meets the European Unionemission regulations through 2005. This innovative engine featuresCaterpillar’s exclusive Advanced DieselEngine Management 2000 (ADEMTM-III)electronic control module for advancedtroubleshooting and diagnosticcapabilities. pg. 4

HydraulicsCat 3126B engine and hydraulics givethe 325C L and 325C LN exceptionalpower, efficiency and controllabilityunmatched in the industry forconsistently high performance in all applications. pg. 5

Ease of OperationCompact Multipro monitor enhancesviewing while displaying a variety ofeasy to read and understand language-based information. Designed for simple,easy operation, the 325C L and 325CLN allow the operator to focus onproduction. pg. 7

Increased work tool options, improvedcycle times, and ease of operation lead to increased productivity and lower operating costs.

SmartBoomTM

■ Easier and smoother operation.■ Faster cycle times in rock scraping

and truck loading.■ Optimum hammering for effective

productivity. pg. 6

New features✔

2

✔ ✔

DurabilityRugged Caterpillar® undercarriagedesign and proven structuralmanufacturing techniques assureoutstanding durability in the toughestapplications. pg. 10

Booms and SticksBuilt for good performance and longservice life, Caterpillar booms andsticks are large, welded, box-sectionstructures with thick, multi-platefabrications that resist high stress.Designed-in flexibility to help bringhigher production and efficiency to alljobs. pg. 11

Work ToolsEx-factory available Buckets, Multi-processors, Sorting and DemolitionGrapples, Hammers and QuickCouplers provide a total solutionpackage to the end-user. pg. 13

ServiceabilityLonger service intervals and easiermaintenance results in better machineavailability and lower owning andoperating costs. pg. 14

Complete Customer ServiceYour Cat dealer offers a wide range ofservices that can be set up under acustomer support agreement when youpurchase your equipment. The dealerwill help you choose a plan that cancover everything from machine andattachment selection to replacement. pg. 15

Operator ComfortRedesigned interior layout maximizesoperator space, provides exceptionalcomfort, and reduces operator fatigue.pg. 8-9

Buckets and TeethA wide variety of bucket types with aggressive bucket designs takeadvantage of the high digging forces to improve productivity. pg. 12

✔ ✔

4

3126B ATAAC EngineThe six-cylinder, HEUI, turbocharged and air-to-air aftercooled engine is built for power,reliability, low maintenance, excellent fuel economy and low emissions.

Powerful performance. The 3126BATAAC engine delivers, at the ratedspeed of 1800 rpm, the net power of 128 kW (173 hp), and meets all currentworldwide emissions standards.

HEUI Fuel System. In the traditionalcommon rail fuel system, the entire fuelline is under high pressure. With theHEUI system, fuel remains at lowpressure until it is injected into thecylinder. Fuel pressure is createdhydraulically in response to a signal from the Electronic Control Module(ECM).

HEUI controls injection pressureelectronically. This unique capability means the regulation of injection pressure is completelyindependent of crankshaft speed. Peak injectionpressure can be achieved under acceleration andlug conditions, providing better fuel economy,better response and reduced smoke.

Turbocharged and Air-to-air aftercooled.Turbocharger packs more dense air into the cylinders for more completecombustion and lower emissionsimproving performance and engineefficiency. These benefits are especiallyuseful at high altitudes. Air-to-airaftercooler reduces smoke and emissionsby providing a cooler inlet air for moreefficient combustion. This also extendsthe life of the piston rings and bore.

Three valves. Three valves per cylinderallow for good air flow enhancing fuelefficiency and heat rejection.

Cooling system. The 325C L and the325C LN feature unique side by sideradiators. In order to ease cleaning ofwater and hydraulic oil radiators, theseare separated. Since they are protected bya fine mesh screen and not staked on eachother, cleaning of plugged radiators ismuch easier and therefore reduces the riskof overheating. While engine coolantradiator is ran by a belt, the hydraulic oilradiator is driven by an independanthydraulic pump.

Engine oil. Caterpillar engine oil isformulated to optimize engine life andperformance and is strongly recom-mended for use in Cat diesel engines. The engine oil change interval isincreased to 500 hours.

Crankshaft. The crankshaft is forged and induction hardened for long-termdurability. Seven main journals and eightcounterweights are dynamically balancedfor smooth operation. The crankshaft is regrindable. Connecting rods can beremoved through the tops of the cylindersfor servicing

Factory remanufactured parts. A largechoice of factory remanufactured partsand dealer proposed repair options in-crease machine availability and reducetotal repair costs.

Injection pressure in a HEUI fuel system isindependent of engine speed.

Engine speed

Inje

ctio

n pr

essu

re

ConventionalFuel System

HEUI

5

HydraulicsFast cycle times and high bucket and stick forces combine to maximize your productivity in any job.

Automatic Engine Control. AutomaticEngine Control (AEC) with convenientone-touch command. Three-stagecontrol maximizes fuel efficiency andreduces sound levels.■ First stage AEC: Selected when the

AEC indicator on the Multipro panel is “OFF”. If a no-load or light-loadcondition continues for more than 3 seconds, the AEC reduces enginespeed by 100 rpm.

■ Second stage AEC: Selected whenthe AEC indicator on the Multipropanel is “ON”. If a no-load or light-load condition continues for morethan 3 seconds, the AEC reducesengine speed to 1300 rpm.

■ Third stage AEC: Pressing the switchon the top of the right hand controllever when the levers are in neutralposition, reduces the engine speed to1020 rpm. If the switch is pressedagain or if a control lever is moved,the engine speed returns to itsprevious level.

Easy to operate hydraulics.Cat hydraulics give the 325C L and325C LN exceptional efficiency and controllability unmatched in the industry for consistently highperformance in all applications. The 325C L/LN easy-to-use hydraulicsystem provides automatic infinitepriority selections between swing andboom, maximizing performance andsimplifying operation. Boom and swingpriority is adjusted automaticallydepending on joystick input, eliminatingthe need to select the work-mode fromthe Multipro. This is a unique feature inthe market.

Auxiliary Hydraulic Circuits. The new auxiliary hydraulic circuits are electronically controlled, allowingessential parameters for frequently usedhydro-mechanical worktools to be pre-recorded. This on-board electro-hydraulic system eliminates the need for manual readjustments to theauxiliary hydraulics, each time adifferent tool is used.

Hydraulic Pumps Cross Sensing System. It improves productivity with fasterimplement speeds and quicker, stronger pivot turns

Hydraulic Cylinder Snubbers.The hydraulic cylinder snubbers at rodend of boom cylinders and both endsof stick cylinders cushion shocks, reduce sound and increase cylinder life,keeping the machine working longer.

Controllability. The hydraulic systemoffers precise control to the 325C L/LN,reducing operator fatigue, improvingoperator effectiveness and efficiency,which ultimately translates intoenhanced performance.

Boom and Stick Regeneration Circuit.Boom and stick regeneration circuitincreases efficiency and reduces cycletimes for higher productivity and loweroperating costs.

Optional SmartBoomTM. The unique CatSmartBoomTM attachment significantlyenhances operator efficiency inapplications including rock scraping,finishing work, hammer and truckloading applications.

6

SmartBoomTM

Reduces stress and vibrations transmitted to the machine and provides a more comfortableenvironment ensuring less operator fatigue.

Rock Scraping. Scraping rock and finishing work is easy andfast. SmartBoomTM simplifies the task and allows the operatorto fully concentrate on stick and bucket, while boom freelygoes up and down without using pump flow.

Hammer Work. It has never been this productive and operator-friendly. The front parts automatically follow the hammerwhile penetrating the rock. Blank shots or excessive force onthe hammer are avoided resulting in longer life for thehammer and the machine. Similar advantages are applicablewhen using vibratory plates.

Truck Loading. Loading trucks from a bench is more productiveand more fuel efficient as the return cycle is reduced while theboom down function does not require pump flow.

Material Handling. It is more efficient and productive due tofaster return cycles. Unloading barges is easier becauseSmartBoomTM avoids excessive force being put on the floor of the barge allowing the operator to fully concentrate onproduction.

7

Ease of OperationDesigned for simple, easy operation, the 325C and 325C LN allow the operator to focus on production.

Multipro. New, compact Multiproenhances viewing while displaying avariety of easy to read and understandlanguage-based information.

Pre-start Multipro system. The Pre-startMultipro system alerts the operator incase there is low coolant, engine oil andhydraulic oil levels, prior to starting theengine. When the engine key remains in the “ON” position for more than 2 seconds, warning indicators aredisplayed in language, if actual fluidlevels are lower than required.

Filter and Oil Change warnings.The filter and oil change warnings are displayed when the number of hoursused reaches the maintenance interval.

Integrated Tool Control system.The integrated Tool Control systemallows the operator to quickly select the proper set of flow and pressure para-meters out of five pre-set combinations,eliminating the need to re-set thesehydraulic parameters each time a tool ischanged. Specific flow and pressure canalso be programmed easily. The oneway/two way hydraulic functions arealso programmable from the ToolControl system. Each of the five pro-grammed tools can even be given aspecific name chosen by the operator.

Languages. Twenty different languagesare available on the 325C L/LN. Themachine can be ordered with up toseven language combinations at a time. A pre-set combination can beoverwritten by another languagecombination with ElectronicTechnician.■ English, French, German, Italian,

Portuguese, Spanish, Japanese■ English, Danish, Finnish, Icelandic,

Norwegian, Swedish■ English, Dutch/Flemish, French,

German, Italian■ English, Czech, German, Greek,

Russian, Turkish■ English, Chinese (simplified),

Indonesian, ThaiThe individual language can be selectedout of the pre-set combination from theMultipro.

8

All-day operator comfortThe 325C and 325C LN interior layout maximize operator space, provide exceptional comfort, and reduce operator fatigue.

9

Skylight. A unique large polycarbonateskylight provides very good upwardvisibility, especially usefull in aboveground applications.

Viewing area. Excellent viewing areathrough wide windows. The front windowis one piece for undistorted view in utilityapplications (two pieces optional).

Wipers. Designed to maximize visibility in poor weather conditions. The parallelwiper system covers almost the completefront window without leaving unwipedareas in the immediate line of sight of theoperator.

Large storage shelf. Located behind the seat provides sufficient room for acooling box. An optional lunch box coveris available to close off the storage space if preferred.

Interior Operator Station. The 325C L and 325C LN operator work station isquiet with ergonomic control placementand convenient adjustments, low lever and pedal effort, ergonomic seat designand highly efficient ventilation.

Seat. A new seat with a two-tone coloroffers two types of cushion – soft and firm – for operator comfort. The recliningknob is located at the right side of the seatfor easier reclining adjustment.

Console. Designed for simplicity andfunctionality. Both consoles have attachedadjustable armrests.

Automatic Climate Control. Fully auto-matic climate control adjusts temperatureand flow and determines which air outlet is best in each situation.

Greater control convenience. Each of thecontrols is positioned within easy reach of the operator. Joysticks with slidingswitches control all implements and swingfunctions. The industry-unique slidingswitches provide modulated control forhydro-mechanical tools and are designedto increase operator comfort and reduceoperator fatigue when working extensivelywith crushers or shears.

Cab Mounts. The cab shell is attached tothe frame with viscous mounts, reducingvibration and sound.

10

Durability325C L and 325C LN structural components and undercarriage are the backbone of the machine's durability.

Structures. Proven structuralmanufacturing techniques, assureoutstanding durability and service lifefrom these important components.

Carbody Design. X-shaped, box-sectioncarbody provides excellent resistance totortional bending.

Track Roller Frames. Robot-weldedtrack roller frames are press-formed,pentagonal units to deliver exceptionalstrength and service life.

Main Frame. Rugged main frame isdesigned for maximum durability andefficient use of materials.

Undercarriage. Durable Catundercarriage absorbs stresses andprovides excellent stability.

Robotic Welding. Precision roboticwelding ensures quality, increasesrigidity, reduces internal stresses andenhances durability.

Rollers and Idlers. Heavy-duty sealedand lubricated track rollers, carrierrollers and idlers provide excellentservice life, to keep the machine in the field longer.

Grease-lubricated Track (GLT). It delivers longer track link and innerbushing life. GLT also reduces travelnoise and reduces potential for frozentrack joints.

Undercarriage Options. Two under-carriage options, long (L) and longnarrow (LN) allow you to choose the best machine for your applicationand business needs.

Long Undercarriage. The long under-carriage (L) maximizes stability and liftcapacity. A long, wide and sturdyundercarriage offers a very stable work platform.

Long Narrow Undercarriage. The longand narrow undercarriage (LN)provides the best choice when ease oftransport is important while maintainingexcellent lift capacity.

11

Booms and SticksDesigned-in flexibility to help bring higher production and efficiency to all jobs.

Booms and Sticks. Built for performanceand long service life, Caterpillar boomsand sticks are large, welded, box-sectionstructures with thick, multi-platefabrications in high-stress areas.

Option. The choice of three booms andsix sticks means the 325C L/LN offer alarge combination of reach and diggingforces for optimum versatility.

Mass Excavation Boom. The massexcavation boom (5.5 m) maximizesproductivity. The ME version offersincreased forces to allow use of largerbuckets and offers added durability formore severe applications.■ M2.5D and M2.0D Sticks.

The M2.5D and M2.0D sticks havebeen specifically designed for largeearth moving applications and use D-sized buckets.

Reach Boom. The reach boom (6.15 m)features an optimum design thatmaximizes digging envelopes with four stick choices.■ R3.2C Stick. The R3.2C stick gives

the largest working envelope withmedium C-sized buckets.

■ R3.2C Heavy Duty Stick. The heavyduty stick provides additionalstrength recommended for demolitionapplications. Its design includes anadditional internal baffle to supportmechanical shears/crushers, extra-hardened bosses and yet thicker plateswhere necessary.

■ R2.65C Stick. The R2.65C stick uses the higher capacity buckets and isbest suited to trenching, excavationand general construction applications.

■ R2.0D Stick. The R2.0D stick useshigh capacity D family buckets forhigh production applications.

Variable Adjustable (VA) Boom.The variable geometry boom offerssuperb flexibility and versatility in the working envelope. Boom positioncan be adjusted from 90° when fullyretracted to 165° when fully extended.With full extension, the working rangegives both maximum dig depth, reachand working height. Equally, when theVA boom is retracted, it can workcloser to its tracks, increase liftingcapacity and work in confined areas. All hydraulic adjustments to the VA boom angle can be made from the cab during a work cycle fortrue versatility.

■ M2.5D and M2.0D Sticks.The M2.5D and M2.0D sticksprovide the necessary strength indigging, lifting and hammeringapplications with the VA body.

12

Buckets and TeethA wide variety of buckets help optimize machine performance. Purpose designed and built toCaterpillar’s high durability standards.

1 Utility Light (LU). Low cost earth workingbucket for floor, bank and ditch finishing.

Utility Standard (SU). Demolition andconstruction bucket handles bricks andbroken concrete, as well as trench filling,floor leveling and bank finishing.

2 Excavation/Trenching (X). Digs and loadssoft to medium materials such as clay and earth. Features weld on tip adapters,hardened cutting edge and side bars.

3 Extreme Excavation/Trenching (EX).Digs and loads compact/abrasivematerials like earth/rock, sand/clay,sand/gravel, coal, chalk and low abrasionores. Features bigger ground engagingtools, plus abrasion resistant steel for all wear parts.

4 Rock (Classical/Standard). Digs andloads mixed earth/rock soils containinghigh percentage of rock or other abrasivematerials. Features V-spade cutting edge,thicker base and wear surfaces.

5 Rock Loading (RL). Loads large blocks of rock and other abrasive materials.Features longer floor plate and increasedside bar curvature for better stabilityunder load.

6 Block Handling (BH). Handles pre-shapedblocks of quarry marble and granite.Features increased tip radius, deep cutside bars for long floor platform.

7 Skeleton Light (SL). For soft and moistsoils and for applications where separationof materials, e.g., branches, peatmoss, isrequired.

Skeleton Heavy Duty (SH). As S.L., but for more demanding separation work suchas sorting rock from sand or gravel ondemolition sites.

8 Ditch Cleaning (DC). Wide, light bucketused mainly with long reach configurationsto clean water beds and banks.

9 Trapezoidal (T). To prepare and maintainsmall irrigation ditches. Features angledsides to shape ditch banks in one operation.

All Cat buckets can be fitted for CaterpillarQuick Coupler.

Tip selection

11 Penetration

12 Penetration Long Life

13 Short

14 Long

15 Heavy Duty Long

16 Heavy Duty Abrasion

17 Heavy Duty Long Life

18 Sharp / Corner Sharp

19 Wide

20 Twin Sharp

2 431

5

6

11 12 13 14 15 16 17 18 19 20

7

8 9

��

13

Tool Control System, Quick Couplers and Work-ToolsUser-friendly, integrated electro-hydraulics make changing tools easy and quick and allow the operator to focus on efficient work.

Tool Controller. Five hydraulic pumpflow and pressure settings can be preset on the Multipro, eliminatingthe need to adjust the hydraulics eachtime a tool is changed. Selecting theproper setting from the Multipro’s menuinstantly provides the operator with thecorrect amount of flow and pressure forthe tool. The unique Cat proportionalattachment sliding switches providemodulation to the tool and makeprecision work easy.

Quick Coupler. Caterpillar QuickCouplers provide quick tool exchangetime while maintaining top machineperformance.■ The universal Quick Coupler

hydraulic circuit avoids difficult andcostly retrofitting of Quick Couplerhydraulics and allows usage of themost frequently used Quick Couplersystems. Ask your Cat dealer formore specific information.

■ The hydraulic version is available inthe standard and narrow version andmakes it very easy for the operator toswitch tools without leaving the cab.

■ The spindle version is a user-friendlymechanical version that can later beconverted into the hydraulic version if required. The spindle version isalso available in the narrow andstandard version.

■ A lifting hook can be added to theQuick Coupler for maximum liftcapacity.

■ All Cat buckets can be fitted forCaterpillar Quick Coupler. The newCat CW-Series Quick Couplers makeit possible for the operator to simplyrelease one work tool and pick up thenext. Your hydraulic excavatorsbecome highly versatile. The CatCW-Series Quick Couplers maximizemachine efficiency in a cost-effectiveway.

Multi-Processor. The Caterpillar Multi-Processors can be equippedwith different jaw types depending on your need.■ CC-jaws combi cutter.■ CR-jaws concrete crusher.■ PP-jaws primary pulveriser.■ PS-jaws secondary pulveriser.■ TS-jaws tank shear.■ S-jaws steel.

Demolition and Sorting Grapple.The demolition and sorting grapple with unlimited left and right rotation is the ideal tool for stripping, sorting,handling and loading.

Hammer. The Cat hammers with a widevariety of tools provide the perfect matchfor maximal life, efficiency andproductivity.

14

Maximum uptime – Service and MaintenanceExtended Service Intervals and Easy access reduce operating costs.

Extended Service Interval. 325C L/LNservice and maintenance intervals havebeen extended to reduce machineservice time and increase machineavailability.

Air Filter Compartment. The air filterfeatures a double-element constructionfor superior cleaning efficiency. When the air cleaner plugs, a warning is displayed on the Multipro screeninside the cab.

Ground Level Service. The design and layout of the 325C L/LN was made with the service technician in mind.Many service locations are easilyaccessible at ground level allowingcritical maintenance to get done quickly and efficiently.

Capsule Filter. The hydraulic returnfilter, a capsule filter, is situated outsidethe hydraulic tank. Removing the filterallows shut-off valves to close thehydraulic circuit preventing contami-nants from entering the system whenthe hydraulic oil filter is changed. Thecapsule filter also keeps the operationclean.

Engine Inspection. Engine can beaccessed from the upper structure orfrom under the machine. The engineand pump compartment are separatedby a steel fire wall.

Handrails and Steps. Larger handrailsand steps assist operator in climbing onand off machine.

Grease Lubricated Track. Greaselubricated seals protect the track linkand deliver long track link pin andbushing inner wear life.

Fan Guard. Engine radiator fan iscompletely enclosed by fine wire mesh,reducing the risk of an accident.

Greasing Points. A concentrated remotegreasing block on the boom deliversgrease to hard-to-reach locations.

Oil Bearings. New boom and stickstandard bearings only need greasingevery 1000 hours.

Caterpillar Product Link systemattachment. It includes a transceivermodule (on-board the machine), officeapplication PC software, and a satellitecommunications network to trackmachine hours, location, and warnings.Product Link simplifies maintenancescheduling, fleet management,unauthorized machine usage ormovement, and product problem eventtracking and diagnosis (PL-201).

Pump Compartment. A service door onthe right side of the upper structureallows ground-level access to the pumpand pilot filter.

Diagnostics and Monitoring. The 325C L/LN is equipped with S•O•SSM sampling ports and hydraulictest ports for the hydraulic system,engine oil and for coolant. A test connection for the ElectronicTechnician (ET) is located in the air filter compartment.

Anti-Skid “Punched Star” Plate.Anti-skid punched-star plate covers topof storage box and upper structure toprevent slipping during maintenance.The plate can be removed for cleaning.

15

Complete Customer SupportCat dealer services help you operate longer with lower costs.

Selection. Make detailed comparisonsof the machines you are consideringbefore you buy. What are the jobrequirements? What production isneeded? What is the true cost of lostproduction? Your Cat dealer can giveyou precise answers to these questions.

Operation. Improving operatingtechniques can boost your profits. YourCat dealer has training literature andother ideas to help you increaseproductivity.

Maintenance. Repair option programsguarantee the cost of repairs up front.Diagnostic programs such as ScheduledOil Sampling and Technical Analysishelp you avoid unscheduled repairs.

Replacement. Repair, rebuild, orreplace? Your Cat dealer can help youevaluate the cost involved so you canmake the right choice.

Product Support. You will find nearlyall parts at our dealer parts counter. Cat dealers utilize a worldwidecomputer network to find in-stock parts to minimize machine down time.Save money with remanufacturedcomponents.

Acquisition. Look past initial price,look at the value the 325C L and 325C LN offer. Consider the financingoptions available as well as savings inday-to-day operating expenses.

16 325C L and 325C LN Hydraulic Excavator specifications

* With counterweight, operator and full fuel.

Engine

Cat 3126B ATAAC diesel engine

Ratings 1800 rpm

Net Power

ISO 9249 128 kW/173 hp

EEC 80/1269 128 kW/173 hp

Net Power (option)

ISO 9249 140 kW/188 hp

EEC 80/1269 140 kW/188 hp

Bore 110 mm

Stroke 127 mm

Displacement 7.2 liters

■ The 3126B engine meets EU directive 97/68/EC Stage IIemission requirements.

■ Net power advertised is the poweravailable at the flywheel when theengine is equipped with fan, aircleaner, muffler, and alternator.

■ No engine derating required below2300 m altitude.

Hydraulic System

Main Implement System

Maximum Flow (2x) 235 l/min

Maximum pressure

Implements 34 300 kPa

Travel 34 300 kPa

Swing 25 000 kPa

Pilot System

Maximum flow 32.5 l/min

Maximum pressure 4100 kPa

Boom Cylinder

Bore 140 mm

Stroke 1407 mm

Stick Cylinder

Bore 150 mm

Stroke 1646 mm

C Family Bucket Cylinder

Bore 130 mm

Stroke 1156 mm

D Family Bucket Cylinder

Bore 150 mm

Stroke 1156 mm

Drive

Maximum Travel Speed 5.0/3.1 km/h

Maximum Drawbar Pull 236 kN

Swing Mechanism

Swing Speed 9.9 rpm

Swing Torque 82.2 kNm

Cab

Cab/FOGS meets ISO 10262.

Sound

The dynamic exterior sound power levelmeets EU Directive 2000/14/EC.

m 2.0 2.7 3.2 3.2 HD 2.0 2.5 2.0 2.5

D1500 C1300 C1300 C1300 D1500 D1500 D1500 D1500

kg 29 040 28 465 28 575 28 665 29 100 29 180 30 005 30 085

kg 27 910 27 335 27 445 27 540 27 970 28 050 28 875 28 955

kg/cm2 0.44 0.44 0.44 0.44 0.44 0.45 0.46 0.46

kg/cm2 0.57 0.56 0.56 0.56 0.57 0.57 0.59 0.59

kg 900 840 945 1040 900 980 900 980

kg 1770 1830 2285

kg 6660 6660 6660

kg 10 685 10 685 10 685

kg 9625 9625 9625

kg 5620 5620 5620

Sticks

Bucket type

Operating weight*

325C L

325C LN

Ground pressure

325C L

325C LN

Stick weight (without cylinders)

Boom weight (without cylinders)

Upperstructure (without counterweight)

Undercarriage

325C L (800 mm shoes)

325C LN (600 mm shoes)

Counterweight

6.15 m Reach boom

5.55 m ME boom

5.85 m VA boom

Machine and Major Component WeightsActual weights and ground pressures will depend on final machine configuration.

17325C L and 325C LN Hydraulic Excavator specifications

DimensionsAll dimensions are approximate.

A Shipping height (with bucket) m

Reach boom

2.0 m stick 3.33

2.7 m stick 3.25

3.2 m stick 3.31

ME boom

2.0 m stick 3.38

2.5 m stick 3.45

VA Boom

2.0 m stick 3.10

2.5 m stick 3.17

B Shipping length m

Reach boom

2.0 m stick 10.46

2.7 m stick 10.33

3.2 m stick 10.33

ME boom

2.0 m stick 9.85

2.5 m stick 9.77

VA Boom

2.0 m stick 10.23

2.5 m stick 10.10

m

C Tail swing radius 3.05

D Track length 4.66

E Length to centers of rollers 3.80

G Ground clearance 0.48

L Track gauge

325C L 2.59

325C LN 2.39

H Width

325C L (800 mm shoes) 3.39

325C LN (600 mm shoes) 2.99

J Cab height

with FOG 3.17

without FOG 3.04

K Body width 2.90

Track Width

Standard Undercarriage

Long 800 mm

Long Narrow 600 mm

Optional Undercarriage

Long 600 mm, 600 mm HD

900 mm, 700 mm HD

Long Narrow 600 mm HD

800 mm, 700 mm HD

Service Refill Capacities

Liter

Fuel Tank Capacity 500

Cooling System 30

Engine Oil 34

Swing Drive 10

Final Drive (each) 6

Hydraulic System (including tank) 310

Hydraulic Tank 250


Bucket SpecificationsContact your Caterpillar dealer for special bucket requirements. All buckets are available to fit the Cat quick coupler.

××××

××××××

××××××

××

××

××××

Link

age

Bucket type

Excavation

Extreme Excavation

Maximum load in kg (payload plus bucket)

mm kg m3 2.0 m 2.7 m 3.2 mW

idth

Wei

ght

Capa

city

(SAE

)

325C L

6.15 m Reach boom

5.55 m ME boom

4794 4360 3927

5.85 m VA boom

Material density1800 kg/m3 and more

Max. Material density 1500 kg/m3

Max. Material density 1200 kg/m3

Not compatible×

Buckets and Quick Coupler (bucket weights including tips and 254 or 281 kg quick coupler)

Buckets (bucket weights including tips)

××××

××××××

××××××

××

××

××××

2.0 m 2.7 m 3.2 m325C LN

4160 3801 3413

××××

××××

××××

××××

××××

××××

××××

××××

××××

××××

××××

××××

××××

××××

××××

×××××

2.0 m 2.5 m325C L

5653 5089

2.0 m 2.5 m325C LN

4930 4430

2.0 m 2.5 m325C L

4794 4315

2.0 m 2.5 m325C LN

4129 3705

C 1300 994 1.35C 1400 1042 1.4C 1500 1107 1.5C 1800 1156 1.7D 1000 1015 1D 1150 1120 1.3D 1300 1150 1.45D 1350 1214 1.5D 1500 1368 1.7D 1650 1455 1.9C 750 714 0.63C 1000 866 0.95C 1450 1121 1.5C 1800 1209 1.7D 750 1339 1.5D 1000 1456 1.7

×××××

× ×

Link

age

Bucket type

Excavation

Maximum load in kg (payload plus bucket)

mm kg m3 2.0 m 2.7 m 3.2 m

Wid

th

Wei

ght

Capa

city

(SAE

)

325C L

6.15 m Reach boom

5.55 m ME boom

4554 4150 3698

5.85 m VA boom

×××××

×××

2.0 m 2.7 m 3.2 m325C LN

3902 3578 3172

×××××

×××××

×××××

×××××

×××××

×××××

×××××

××××××

2.0 m 2.5 m325C L

5452 4859

2.0 m 2.5 m325C LN

4706 4182

2.0 m 2.5 m325C L

4550 4051

2.0 m 2.5 m325C LN

3790 3425

C 1000 767 1.07C 1200 861 1.33C 1300 900 1.47C 1400 939 1.6C 1500 978 1.73D 1400 1010 1.73

×

×

×

×

×

××

×

×

×

×

×

×

×

×××××× ××××

××××××

×

×××

×××

×××× ×

××××××

×××××

×××××

×××××

×××××× ××

×××××× ×

×××××× ×

××××××××××

××××

×××

×× ×× ××

––

–

––

–

––

–

––

–

––

–

––

–

––

–

––

–

––

–

––

–

× ××

× ×

×

×

×××× ×

×

×××

××× × × ×

×

××××××××

×××××××

××××××

×××××××

×××–– ××

××

× ×××

××××

×××

×

– –– –

––

––

––

––

––

––

––

––

Work Tools Matching Guide

2.0 m 2.7 m 3.2 m 3.2HD325C L 325C LN

2.0 m 2.7 m 3.2 m 3.2HD325C L

2.0 m 2.5 m325C LN

2.0 m 2.5 m 2.0 m 2.5 m325C L

2.0 m 2.5 m325C LN

6.15 m Reach boom

5.55 m ME boom

5.85 m VA boom

* Boom Mounted

Hammers

Mechanical Pulverizers

Multiprocessor

Without quick coupler

Crushers

Pulverizers

Mechanical Shears

180° rotatable Shears


Mechanical Grapples

Demolition and Sorting Grapple

Hammers

Quick Coupler

Multiprocessor

With quick coupler

CW-40CW-45CW-40SCW-45SH120CsH130sH140sMP15MP20VHC-30VHC-40VHC-50VHP-30VHP-40VHP-50VCS-35VWC-25VWS-25S320S325G115G125G315G320G330

Crushers

Pulverizers

Mechanical Shears


Mechanical Grapples

Demolition and Sorting Grapple

H120CsH130sH140sP115P120VMC-40MP15MP20CR20CR28VHC-30VHC-40VHC-50P16P20P25P28VHP-30VHP-40VHP-50S115VCS-35VWC-25VWS-25S225S230S230*S240*S250*S320S325S340*G115G125G315G320G330

360° Working RangeOver the front only

RecommendedAvailable

Not Compatible×


Reach Excavation Boom Working Ranges6.15 m Reach (R) boom configuration

Stick Length

A Maximum Digging Depth

B Maximum Reach at Ground Level

C Maximum Cutting Height

D Maximum Loading Heigh

E Minimum Loading Heigh

F Maximum Digging Depth 2.44 m Level Bottom

G Maximum Vertical Wall Digging Depth

Bucket Tip Radius

Bucket Forces (ISO 6015)

Stick Forces (ISO 6015)

R2.0D R2.7C R3.2C R3.2C HDm 2.0 2.7 3.2 3.2

m -6.03 -6.57 -7.12 –

m 9.52 10.08 10.58 –

m 9.41 9.76 9.97 –

m 6.34 6.87 7.07 –

m 3.52 2.97 2.44 –

m -5.79 -6.39 -6.96 –

m -4.13 -4.61 -5.15 –

mm 1658 1556 1556 –

kN 192 156 150 150

kN 182 147 133 133

2121

VA Boom Working Ranges5.85 m Variable Geometry Adjustaboom

Stick Length




D Maximum Loading Height

E Minimum Loading Height



Bucket Tip Radius



Mass Excavation Boom Working Ranges5.55 m Mass (ME) boom configuration

M2.0D M2.5Dm 2.0 2.5

m -5.48 -5.98

m 8.88 9.34

m 8.98 9.18

m 5.91 6.12

m 3.09 2.59

m -5.25 -5.78

m -3.42 -3.86

mm 1658 1658

kN 192 184

kN 182 163

Stick Length




D Maximum Loading Height

E Minimum Loading Height



Bucket Tip Radius



M2.0D M2.5Dm 2.0 2.5

m -5.41 -5.89

m 9.33 9.80

m 10.89 11.27

m 7.59 7.96

m 4.31 3.81

m -5.29 -5.78

m -3.55 -4.00

mm 1658 1658

kN 192 184

kN 182 163

22

Load Point Height Load Radius Over Front Load Radius Over Side Load at Maximum Reach

* Limited by hydraulic rather than tipping load.The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.

Shoes800 mm

Bucket Capacity (SAE)1.35 m3

Bucket Weight994 kg

325C L

Medium Stick2.65 m *3460 *3460 8.37

*6540 4870 *3340 *3340 9.28*9640 *9640 *7820 7060 *6910 4790 *3350 3000 9.81

*12 440 10 480 *9130 6680 7110 4620 *3470 2800 10*14 620 9730 9920 6320 6910 4450 *3710 2770 9.96*15 450 9390 9650 6080 6770 4310 *4110 2920 9.6

*8740 *8740 *15 210 9340 9540 5980 6710 4260 *4760 3310 8.93*15 820 *15 820 *14 030 9460 9600 6030 *2960 *2960 7.83*15 580 *15 580 *11 480 9770 *8110 6270

7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 m–3.0 m–4.5 m

Ground

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

m

*7080 6760 *4830 4640 7.64*7200 6820 *4700 3510 8.66

*10 460 *10 460 *8110 6560 6810 4310 *4750 2970 9.23*9280 6170 6660 4180 4470 2730 9.469410 5820 6500 4030 4460 2700 9.39

*14 700 8780 9190 5620 6390 3930 4760 2900 9*14 110 8860 9160 5600 6400 3940 *4710 3420 8.25

*16 270 *16 270 *12 510 9120 *9310 5740*9100 *9100

7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 m–3.0 m–4.5 m

Ground

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

m

325C L

Shoes800 mm


Bucket Weight994 kg

Long Stick3.2 m *2930 *2930 7.64

*4110 *4110 *2680 *2680 8.98*5900 4960 *2590 *2590 9.82

*7110 *7110 *6380 4840 *4090 3370 *2610 *2610 10.31*11 310 10 760 *8490 6770 *7090 4650 5190 3310 *2710 2530 10.52*13 830 9910 *9830 6370 6920 4450 5090 3220 *2910 2500 10.46

*4440 *4440 *15 160 9430 9660 6070 6740 4280 5010 3150 *3240 2610 10.12*5120 *5120 *8510 *8510 *15 350 9270 9490 5930 6650 4190 *3770 2920 9.49*9470 *9470 *13 780 *13 780 *14 570 9320 9490 5920 6660 4210 *3940 3580 8.48

*17 690 *17 690 *12 610 9550 *9220 6070

9.0 m7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 m–3.0 m–4.5 m

Ground

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

m

325C L

Shoes800 mm


Bucket Weight994 kg

HD Long Stick3.2 m *2910 *2910 7.64

*4080 *4080 *2650 *2650 8.98*5840 4910 *2570 *2570 9.82

*7050 *7050 *6320 4790 *4050 3320 *2580 *2580 10.31*11 230 10 690 *8420 6710 *7020 4600 5130 3260 *2690 2490 10.52*13 740 9820 *9750 6300 6860 4390 5030 3170 *2890 2450 10.46

*4410 *4410 *15 060 9340 9580 6000 6680 4220 4950 3090 *3210 2570 10.12*5090 *5090 *8480 *8480 *15 250 9180 9420 5850 6580 4130 *3740 2870 9.49*9440 *9440 *13 750 *13 750 *14 470 9230 9410 5850 6600 4150 *3930 3530 8.48

*17 580 *17 580 *12 520 9470 *9140 6010

9.0 m7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 m–3.0 m–4.5 m

Ground

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

m

Shoes800 mm


Bucket Weight1368 kg

325C L

Short Stick2.0 m

Lift capacities with 6.15 m Reach boomAll weights are in kg


Shoes600 mm


Bucket Weight994 kg

325C LN

Medium Stick2.65 m *3460 *3460 8.37

*6540 4270 *3340 2980 9.28*9640 *9640 *7820 6230 *6910 4200 *3350 2590 9.81

*12 440 9150 *9130 5850 6820 4030 *3470 2400 10*14 620 8420 9530 5500 6630 3860 *3410 2370 9.9615 050 8100 9260 5260 6480 3720 *4110 2500 9.6

*8740 *8740 14 990 8040 9150 5170 6420 3670 *4760 2840 8.93*15 820 *15 820 *14 030 8160 9200 5220 *2960 *2960 7.83*15 580 *15 580 *11 480 8460 *8110 5460

7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 m–3.0 m–4.5 m

Ground

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

m

*7080 5920 *4830 4050 7.64*7200 5980 *4700 3020 8.66

*10 460 9350 *8110 5730 6520 3720 4560 2520 9.23*9280 5340 6380 3590 4260 2300 9.469020 5000 6210 3440 4240 2260 9.39

14 400 7490 8800 4810 6100 3340 4530 2430 9*14 110 7570 8770 4790 6110 3350 *4710 2900 8.25

*16 270 16 150 *12 510 7820 8930 4930*9100 8310

7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 m–3.0 m–4.5 m

Ground

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

m

325C LN

Shoes600 mm


Bucket Weight994 kg

Long Stick3.2 m *2930 *2930 7.64

*4110 *4110 *2680 *2680 8.98*5900 4360 *2590 *2590 9.82

*7110 6330 *6380 4240 *4090 2910 *2610 2320 10.31*11 310 9420 *8490 5940 6860 4060 4960 2850 *2710 2150 10.52*13 830 8590 9590 5550 6630 3860 4860 2760 *2910 2120 10.46

*4440 *4440 15 110 8130 9260 5260 6450 3690 4780 2690 *3240 2220 10.12*5120 *5120 *8510 *8510 14 920 7980 9100 5120 6360 3610 *3770 2490 9.49*9470 *9470 *13 780 *13 780 *14 570 8030 9090 5110 6370 3620 *3940 3080 8.48

*17 690 16 720 *12 610 8250 *9220 5260

9.0 m7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 m–3.0 m–4.5 m

Ground

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

m

325C LN

Shoes600 mm


Bucket Weight994 kg

HD Long Stick3.2 m *2910 *2910 7.64

*4080 *4080 *2650 *2650 8.98*5840 4310 *2570 *2570 9.82

*7050 6280 *6320 4190 *4050 2860 *2580 2270 10.31*11 230 9350 *8420 5880 6800 4000 4910 2800 *2690 2110 10.52*13 740 8510 9530 5480 6580 3800 4810 2710 *2890 2070 10.46

*4410 *4410 15 010 8040 9190 5190 6390 3630 4730 2630 *3210 2170 10.12*5090 *5090 *8480 *8480 14 830 7880 9020 5040 6290 3540 *3740 2440 9.49*9440 *9440 *13 750 *13 750 *14 470 7940 9020 5040 6310 3560 *3930 3030 8.48

*17 580 16 600 *12 520 8170 *9140 5190

9.0 m7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 m–3.0 m–4.5 m

Ground

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

m

Shoes600 mm



325C LN

Short Stick2.0 m




Shoes800 mm



*4860 *4860 6.78*7890 6830 *4650 4240 7.95

*10 430 *10 430 *8510 6700 *4690 3520 8.59*12 890 10 230 *9570 6390 6750 4250 *4920 3220 8.84*14 740 9510 9700 6070 6630 4150 5150 3190 8.76*15 200 9210 9480 5880 5560 3460 8.33

*15 180 *15 180 *14 440 9230 9450 5850 *4000 *4000 7.5*16 570 *16 570 *12 240 9500

7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 m–3.0 m

Ground

1.5 m325C L 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

mShort Stick2.0 m

Shoes600 mm



325C L

Medium Stick2.5 m

Lift capacities with 5.55 m Mass Excavation boomAll weights are in kg

Shoes600 mm



*4860 *4860 6.78*7890 5990 *4650 3680 7.95

*10 430 9740 *8510 5860 *4690 3030 8.59*12 890 8890 *9570 5560 6460 3660 *4920 2740 8.84*14 740 8190 9310 5250 6350 3560 4910 2710 8.76*14 930 7910 9090 5060 5310 2940 8.33

*15 180 *15 180 *14 440 7930 9060 5030 *4000 3600 7.5*16 570 *16 570 *12 240 8180

7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 m–3.0 m

Ground

1.5 m325C LN 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

mShort Stick2.0 m

*3710 *3710 7.4*7120 6960 *3550 *3550 8.46

*9410 *9410 *7870 6780 *6760 4390 *3580 3170 9.05*11 980 10 460 *9030 6450 6790 4290 *3760 2910 9.29*14 190 9670 9740 6100 6630 4150 *4110 2870 9.21*15 140 9250 9470 5860 6510 4040 *4680 3080 8.82

*13 870 *13 860 *14 820 9170 9370 5770 *4790 3640 8.05*18 570 *18 570 *13 170 9330 *9390 5870

*9070 *9070

7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 m–3.0 m–4.5 m

Ground

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

m

Shoes600 mm



325C LN

Medium Stick2.5 m *3710 *3710 7.4

*7120 6110 *3550 3260 8.46*9410 *9410 *7870 5940 6610 3790 *3580 2710 9.05

*11 980 9120 *9030 5620 6500 3690 *3760 2460 9.29*14 190 8350 9350 5280 6350 3550 *4110 2420 9.2114 990 7940 9070 5040 6230 3440 *4680 2600 8.82

*13 870 *13 860 *14 820 7860 8980 4950 *4790 3110 8.05*18 570 16 420 *13 170 8020 9090 5050

*9070 8470

7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 m–3.0 m–4.5 m

Ground

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

m




Shoes800 mm



*5570 *5570 5.44*9210 *9210 *4880 4880 7.37

*10 610 *10 610 *9860 *9860 *7340 6720 *4670 3600 8.44*12 010 10 720 *7990 6470 *5940 4170 *4410 3010 9.03*14 800 9630 *9080 6080 *6260 4060 *4370 2750 9.28

9390 5710 6450 3920 *4550 2730 9.2*12 780 8650 9160 5520 6360 3840 *4670 2960 8.81

*9990 8760 *7930 5520

9.0 m7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 mGround

1.5 m325C L 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

mShort Stick2.0 m

Shoes800 mm



325C L

Medium Stick2.5 m

Shoes600 mm



*5570 *5570 5.44*9200 *9200 *4880 4180 7.37

*10 610 *10 610 *9860 *9860 *7340 5770 *4670 3030 8.44*12 010 9210 *7990 5540 *5940 3500 *4410 2490 9.03*14 800 8160 *9080 5150 6220 3390 4300 2250 9.28

8870 4790 6070 3250 4300 2220 9.2*12 780 7210 8650 4600 5980 3170 4630 2420 8.81

*9990 7310 *7920 4600

9.0 m7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 mGround

1.5 m325C LN 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

mShort Stick2.0 m

*7730 *7730 *4220 *4220 6.32*8330 *8330 *6720 *6720 *3730 *3730 7.98*8680 *8680 *6840 *6840 *5450 4260 *3560 3190 8.95

*10 850 *10 850 *7480 6580 *5590 4250 *3560 2700 9.51*14 420 9930 *8540 6160 *5950 4090 *3690 2470 9.74*14 830 9060 9440 5750 *6390 3910 *3950 2440 9.67*13 650 8680 9150 5500 6310 3790 *4390 2620 9.3*11 240 8680 *8630 5430 *5960 3780 *3400 3090 8.58

*7570 *7570 *5740 5560

9.0 m7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 m–3.0 m

Ground

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

m

Shoes600 mm



325C LN

Medium Stick2.5 m *7730 *7730 *4220 *4220 6.32

*8330 *8330 *6720 5970 *3730 3630 7.98*8680 *8680 *6840 6000 *5450 3650 *3560 2710 8.95

*10 850 9610 *7480 5730 *5590 3640 *3560 2260 9.51*14 420 8580 *8540 5320 *5950 3490 *3690 2040 9.74*14 830 7730 9040 4920 6150 3310 *3950 2010 9.67*13 650 7370 8760 4670 6020 3190 4230 2170 9.3*11 240 7360 *8630 4610 *5960 3180 *3400 2590 8.58

*7570 *7570 *5740 4740

9.0 m7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 m–3.0 m

Ground

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

m

Lift capacities with 5.85 m Variable Geometry AdjustaboomAll weights are in kg


Standard Equipment Standard equipment may vary. Consult your Caterpillar dealer for specifics.

Alternator, 65 ampAutomatic engine speed controlAutomatic swing parking brakeAutomatic work modesAuxiliary hydraulic valveBoom and stick regeneration circuitCab

Bi-level air conditioner withautomatic climate control

Ash tray with cigar lighterCoat hookDrink holderEmergency exitFloormat washable Heater and DefrosterHornHydraulic neutralizer lever for all

controlsLanguage display Multipro – Gauges for fuel level, engine

coolant temperature and hydraulicoil temperature

– Indicator for engine dial settingwarning messages

– Filter/ fluid change information– Pre-start Level Check for hydraulic

oil, engine oil and coolant – Working hour information– Clock with 10 day back-up batteryLight, interior

Literature holderLow fuel indicator lightJoysticks, adjustable and pre-wired

with sliding switches for auxiliaryfunctions

Polycarbonate SkylightPositive filtered ventilationPower supply 12V - 7APre-wired radio mounting (2)Retractable seatbeltFully adjustable suspension seat with

headrestReturn filter clogging alarmStationary skylightStorage compartment suitable for a

lunch box coolerFixed one piece front windscreenParallel mounted bottom wiper

and washerBolt-on FOGS capabilitySun visorTravel control pedals with removable

hand leversTwo-speed auto shift travel

Cat 3126B diesel engine, HEUI,turbocharged with air-tor-airaftercooler

CounterweightDoor locks and caps locks with

Caterpillar one-key security system

Fine swing ControlHeavy Duty maintenance free batteries

(2)Heavy Duty bottom guardingHeavy Duty swivel guardWorking lights

Frame mounted, oneBoom, both sidesCab mounted, two

Main shut-off switchMirrors, frame and cabMufflerPower trainSide by side radiatorsWater separatorUndercarriage

Hydraulic track adjustersGrease lubricated track-type

undercarriageIdler and center section track guiding

guardsShoes:

800 mm triple grouser – 325C L600 mm triple grouser – 325C LN


Air Pre-cleaner with wider pitch radiator core

Boom lowering control device with Smart BoomTM and overloadwarning device

Booms: Reach 6.15 mMass Excavation 5.55 mVariable Adjustable 5.85 m

BucketsBucket linkage

C and D familyClamshell actuatorCooling system, high ambientDedicated Cat quick couplerElectric Refueling pumpEngine 140 kWGround engaging toolsGuards

Falling object (cab)Full length track guidingSprocket track guiding

Hydraulic arrangementsBasic Auxiliary providing 5 pre-programmable pressure/flowpositions– One-way, includes one/two pump

capability– One-way/Two-way, includes

one/two pump capability andmedium pressure

Control group for Quick couplerTwo-way medium pressure Hydraulic lines for boom and stickHydraulic modulation pedalInstallation of and setting for Cat

hydro-mechanical tools: Multi-processors, hammers, sorting anddemolition grapples, quickcouplers.

Openable front windshield, 50/50 split Seat heaterProduct Link (PL-201)Starting aid, cold weather

Starting aid, etherStick lowering control deviceStraight travel pedalSticks with 6.15 m Reach boom

2000 mm2700 mm3200 mm

Heavy duty stick with Reach boom3200 mm HD

Sticks with 5.55 ME boom and 5.9 VA boom

2000 mm2500 mm

Synthetic Ester based Bio hydraulic oilTrack (triple grouser):

325C L600 mm600 mm HD700 mm HD900 mm

325C LN600 mm HD700 mm HD800 mm

Visor rain protection

Optional EquipmentOptional equipment may vary. Consult your Caterpillar dealer for specifics.

325C L and 325C LN Hydraulic Excavators

HEHH2733 (12/2001) hr

www.CAT.com

© 2001 Caterpillar

Materials and specifications are subject to change without notice.Featured machines in photos may include additional equipment.

See your Caterpillar dealer for available options.

®

Date post:	22-Jul-2018
Category:	Documents
Upload:	dothuy
View:	230 times
Download:	0 times

325C L 325C - dizv3061bgivy.cloudfront.net · Ease of Operation Compact Multipro monitor enhances...

Documents