11
3-D Printed Conceptual Site Model Case Studies Contact Chapman Ross for more information: [email protected] 978-206-5779
| Date post: | 15-Apr-2017 |
| Category: |
Environment |
| Upload: | chapman-ross-pe |
| View: | 170 times |
| Download: | 2 times |
3-D Printed Conceptual Site Model Case Studies
Contact Chapman Ross for more information:[email protected]
978-206-5779
Case Study #1EPA Region 4 NAPL and Geology Model
3-D Printed Conceptual Site Models
Virtual 3-D Model
3-D Printed Desktop Model
3-D Printed Desktop Scale Model Front View Showing Geology and NAPL
3-D Printed Desktop Scale Model Front View Showing Geology – Large NAPL Removed
3-D Printed Desktop Scale Model Close-up of Geology Layers and NAPL Insets
Case Study #2Distribution of ZVI in Clay Till
3-D Printed Conceptual Site Models
Virtual 3-D Model
(created in EVS)
3-D Printed Model
3-D Printed Conceptual Site Models Distribution of ZVI in Clay Till
3-D Printed Model
3-D printed model shows distribution of zero-valent iron (ZVI) layers
emplaced in clay using jet injection.
Case Study #368th Street Landfill Superfund Site
3-D Printed Conceptual Site Models
3-D Printed Conceptual Site Models 68th Street Landfill Superfund Site
Bottom Layer:Clay Aquitard
Middle Layer:Water Table w/ Site Boundary
Top Layer:Ground Surface
w/ Site Boundary
Case Study #4Landfill Scale Model
3-D Printed Conceptual Site Models
3-D Surface (AutoCAD)
3-D Printed Scale Model
3-D Printed Conceptual Site Models Landfill Scale Model and Block Model
Block Model:Liner System Detail
Scale Model: Final Grades and Site
Topography
