22
www.capitalsafety-training.co.uk www.3M.com/FallProtection 3M Safety Training.
| Date post: | 11-Jul-2018 |
| Category: |
Documents |
| Upload: | trinhxuyen |
| View: | 214 times |
| Download: | 0 times |
www.capitalsafety-training.co.ukwww.3M.com/FallProtection
3M Safety Training.
2 3M Fall Protection | 00 800 999 55500
Our site and facilities.Put simply, our facilities offer world-class safety training, in our unique training centre. Just look at what your people can get their hands on:
• Three telecommunications towers
• Training tower
• Confined space training area with 40 m of tunnel
• Non-operational 30-metre wind turbine
• Large rooftop training area
• IRATA and GWO approved training facilities.
So, whatever you need, we’ve got it covered.
Who we are.We recently changed our name from Capital Safety Training to 3M Safety Training, but our goal remains the same: to provide the very best training to help ensure all your workers go home safely every day. The only difference is we’ve now added 3M skill at applying science to improve everyday lives into the mix. This means you can now protect the safety and the health of your staff even better with the exact training you need.
So while the name may have changed, we’re still global leaders in fall protection. With 3M Safety Training you’re in safe hands.
3
3M Safety Training is dedicated to ensuring our most important goal remains the same as yours; to ensure all your workers come home safely.
[email protected] | www.capitalsafety-training.co.uk
4 3M Fall Protection | 00 800 999 55500
Courses tailored to your precise needs. Even though our training covers numerous industries and activities, sometimes you need training that’s specific to the needs of your site. Never fear. Our safety experts love site visits, so let them come to you. You may need a single training solution in one place, or a wide range of worldwide training that complies with the needs of different regions. Either way, we’ll take a good look around, and talk to you about the most effective training.
E-Learning and blended learning.Our interactive ‘Introduction to Work at Height module’ and wide range of other highly effective Health and Safety E-Learning are ideal supplements to your existing safety training for employees.
Benefits to your workers • Consistency:
E-Learning provides a high level of consistency, as the way lessons are taught stays the same, every time.
• Can save time and money: Your workers are away from their job less, meaning far less travel time and expense.
• Effective administration: Our E-Learning contains a Learning Management System, so you can see your complete set of E-Learning modules, and who’s completed what module – all at the touch of a button.
• Extra introductory and refresher modules: Want to provide ongoing training to all your employees without having to enrol them on courses (especially CPD and refresher training)? We can create tailored module packages on the main health and safety topics, plus any other extra modules you need to cover your specific needs.
Consultancy.If your business carries out work at height or confined space access work, we offer a range of consultancy services.
From simply incorporating company policy and procedures into your training, to developing integrated policy, process and training solutions, our team of experts are here to help.
Managed services.According to the HSE, falls from height are the UK’s biggest cause of workplace death and serious injury over the last ten years. The Work at Height Regulations 2005 require all employers to minimise the risk to employees working at height. With 3M Safety Training, you have the specialist help to develop and carry out complete risk management programmes, and tackle any other issues you may have.
5
The 3M Fall Protection demo van.Smart training that comes to you.
We’re always looking for new ways to spread the word about how to improve work at height safety. That’s where our fully equipped demo van comes in. So your workforce can watch practical fall protection demonstrations on site, and get to grips with all our latest safety equipment, including a Mobile Drop Testing Unit - specially designed to show fall arrest forces.
Demos include:• Drop tests: to show the forces workers
are subjected to during a fall from height
• Rescue: practical demonstrations across a range of work environments
• Confined space equipment
• Fall prevention for tools: demonstrations of products designed to prevent the dropping of tools
• Understanding Self-Retracting Lifelines
• Basic working at height guidelines.
[email protected] | www.capitalsafety-training.co.uk
Our demovans are now equipped with the latest Virtual Reality technology, so you can experience a fall from height scenario. A great tool to educate in a safe and controlled environment.
NEW!
General Industry
General Industry
00 800 999 55500www.capitalsafety-training.co.uk
As one of the UK’s leading height safety training providers we have extensive experience of working with a broad portfolio of clients across a wide range of industries. This experience enables us to develop better training courses, and helps ensure customers always receive the most relevant training to their industry. This focus on ensuring maximum efficiency of your time and resources means we consistently deliver the best training possible.
Our instructors have decades of combined experience and an extensive range of qualifications. They are drawn from a variety of backgrounds in the work at height, confined spaces, construction safety and rigging and rescue sectors, enabling effective courses to be delivered based on personal experiences practices rather than detached theory.
00 800 999 55500 | www.capitalsafety-training.co.uk3M Fall Protection
General Industry
Course OverviewsCode Course Title Overview Duration
HS0 Height Safety - Awareness
This 4 hour training course provides an overview of the requirements of planning and undertaking basic working at height tasks. ½ Day
HS1 Height Safety - Level 1
The aim of this course is to provide a broad overview of work at height requirement and fall protection controls. 1 Day
HS2 Height Safety - Level 2
This training provides the delegate with even more practical climbing and work at height technique practice than the HS1 course and also includes the practical use of rescue equipment in a variety of rescue scenarios.
2 Days
HS3 Height Safety - Level 2 Refresher
The aim of this course is to provide the delegate with an opportunity to refresh their theoretical knowledge and practical skills and gain HS2 re-certification. 1 Day
HS4 Height Safety - PFPE Inspector
This training provides the theoretical knowledge and practical skills which are part of the requirements to be deemed Competent to undertake the statutory inspection of Personal Fall Protection Equipment (PFPE).
1 Day
HS5Height Safety - Managers and Supervisors
This course aims to give a comprehensive understanding of site managers and supervisor’s responsibilities under the relevant legislation. 1 Day
HS7 Height Safety 7 - Rescue
There is a requirement under the Work at Height Regulations to plan and make provision for rescue. This course focuses on workmate rescue procedures applicable to a range of scenarios typically found in the workplace.
1 Day
HS8 Height Safety 8 - Escape
This course will equip those attending with the necessary skills required to evacuate from a high structure, platform or equipment during an emergency. ½ Day
HS9 Height Safety 9 - Demonstrator
On successful completion of this training those attending will be equipped with the skills to deliver maintenance of skills training on specified equipment. 2 Days
HS10Height Safety 10 - Fall Protection and Rescue
Developed in conjunction with manufacturing, production and servicing industries, this course provides essential fall protection and rescue training for operational and maintenance teams.
1 Day
HS11Height Safety 11 - Landscape Maintenance
This training provides the knowledge and skills required to work on steel ground (up to 40 deg) and adjacent to unguarded edges. 1 Day
CS1 Confined Spaces Access - Low Risk
This course is aimed at those persons required to access confined spaces classified as Low Risk. 1 Day
CS2Medium Risk - Incorporating Emergency Breathing Apparatus
This 2 day course is aimed at those persons required to access confined spaces classified as Medium Risk. The course incorporates the use of self contained emergency breathing apparatus for emergency escape.
2 Days
CS3
Confined Space Access - High Risk - Incorporating the use of Self Contained Breathing Apparatus - Rescue
This course is aimed at those persons required to access confined spaces classified as high risk spaces which can be defined as confined spaces where there is a foreseeable risk from a significant hazard.
3 Days
CS4 Confined Space - Rescue
This course specifically concentrates on the advanced rescue skills required to provide on-site cover for those working in confined spaces (of any type). It assumes previous qualification in entry and BA, and covers searching, advanced winching and hauling systems, operations in zero visibility, incident management and immediate-response risk assessment (IRRA).
1 Day
Code Course Title Overview Duration
CS5Confined Space - Med Risk Re-qualification
This training allows holders of Medium Risk Confined Space Access certificates to refresh their knowledge and skills to gain re-certification. 1 Day
CS6Confined Spaces Access - High Risk Re-qualification
This course is for the requalification of persons holding current Confined Spaces Access certification up to and including High Risk (incorporating full working breathing apparatus).
1 Day
CS7Confined Space - Managers and Supervisors
This training defines the responsibilities of persons managing, planning or overseeing confined space access and provides the knowledge and skills to allow them to safely plan and manage confined space access.
1 Day
RT1 ISO 22846 - 1 - Rope Access Technician
This four day course is for those persons who are required to use abseil techniques in order to gain access to and work in difficult locations. 4 Days
RT2 ISO 22846 - 2 - Rope Access Supervisor
This four day course is for those persons who are required to supervise employees using industrial rope access techniques to gain access to difficult and awkward locations.
4 Days
IR1IRATA 1 Rope Access - IRATA Level 1 rope access
The IRATA Level 1 rope access course is the entry level into the IRATA framework, and is aimed at delegates with little or no previous experience. 5 Days
IR2IRATA 2 Rope Access - IRATA Level 2 rope access
IRATA Level 2 Technicians are required to operate at a higher level of skill than a Level 1 Technician, as a consequence those persons attending this course will be trained in advanced rescue and rope access techniques.
5 Days
IR3IRATA 3 Rope Access - IRATA Level 3 rope access
IRATA Level 3 technicians provide supervision and rescue cover for Level 1 and 2 technicians, and delegates will be trained in advanced rescue and rope access techniques.
5 Days
AA1 Asbestos - Awareness
The aim of this awareness training course is to provide those attending with the required knowledge and understanding to avoid the risks from asbestos. ½ Day
EI1Eyebolt Installation - Class A1 Anchor Devices
This course provides both the theoretical and practical training to enable personnel to install and inspect Fall Arrest and Abseil anchor devices. ½ Day
PLA1 Portable Ladder - Access
The aim of this half day course is to provide individuals with the necessary knowledge and skills to allow them to plan and undertake work on portable ladders and steps safely.
½ Day
PLI1 Portable Ladder - Inspection
Candidates will learn how competently inspect portable ladders and steps and maintain records. ½ Day
TS1PASMA / non PASMA - Mobile Access Towers
This course covers the theoretical knowledge and practical skills requirements for the safe erection, inspection and dis-assembly of portable tower scaffolds. The training can be PASMA certificated if required.
1 Day
FA1 First Aid at Height This one day course has been developed to deal with first aid incidents at height and in remote outdoor locations when help may be some time away. 1 Day
FA2Appointed Person - Emergency First Aid at Work
This one day course provides delegates with the basic essential skills of First Aid. 1 Day
ManufacturingManufacturingManufacturing
ManufacturingEvery year over 25 people are killed as a result of a fall from height and over 3000 seriously injured. Unfortunately manufacturing industries are a key contributor to these incidents.
We can help you minimise your risk through our extensive range of training courses. On-site consultancy and inspection services can supplement your health and safety management system to ensure you are taking every possible action to protect your workforce and business.
00 800 999 55500www.capitalsafety-training.co.uk
00 800 999 55500 | www.capitalsafety-training.co.uk3M Fall Protection
Course Overviews
00 800 999 55500 | www.capitalsafety-training.co.uk3M Fall Protection
Manufacturing
Code Course Title Overview Duration
HS0 Height Safety - Awareness
This 4 hour training course provides an overview of the requirements of planning and undertaking basic working at height tasks. ½ Day
HS1 Height Safety - Level 1
The aim of this course is to provide a broad overview of work at height requirement and fall protection controls. 1 Day
HS2 Height Safety - Level 2
This training provides the delegate with even more practical climbing and work at height technique practice than the HS1 course and also includes the practical use of rescue equipment in a variety of rescue scenarios.
2 Days
HS3 Height Safety - Level 2 Refresher
The aim of this course is to provide the delegate with an opportunity to refresh their theoretical knowledge and practical skills and gain HS2 re-certification. 1 Day
HS4 Height Safety - PFPE Inspector
This training provides the theoretical knowledge and practical skills which are part of the requirements to be deemed Competent to undertake the statutory inspection of Personal Fall Protection Equipment (PFPE).
1 Day
HS5Height Safety - Managers and Supervisors
This course aims to give a comprehensive understanding of site managers and supervisor’s responsibilities under the relevant legislation. 1 Day
HS7 Height Safety 7 - Rescue
There is a requirement under the Work at Height Regulations to plan and make provision for rescue. This course focuses on workmate rescue procedures applicable to a range of scenarios typically found in the workplace.
1 Day
HS8 Height Safety 8 - Escape
This course will equip those attending with the necessary skills required to evacuate from a high structure, platform or equipment during an emergency. ½ Day
HS9 Height Safety 9 - Demonstrator
On successful completion of this training those attending will be equipped with the skills to deliver maintenance of skills training on specified equipment. 2 Days
HS10Height Safety 10 - Fall Protection and Rescue
Developed in conjunction with manufacturing, production and servicing industries, this course provides essential fall protection and rescue training for operational and maintenance teams.
1 Day
CS1 Confined Spaces Access - Low Risk
This course is aimed at those persons required to access confined spaces classified as Low Risk. 1 Day
CS2Medium Risk - Incorporating Emergency Breathing Apparatus
This 2 day course is aimed at those persons required to access confined spaces classified as Medium Risk. The course incorporates the use of self contained emergency breathing apparatus for emergency escape.
2 Days
CS3
Confined Space Access - High Risk - Incorporating the use of Self Contained Breathing Apparatus - Rescue
This course is aimed at those persons required to access confined spaces classified as high risk spaces which can be defined as confined spaces where there is a foreseeable risk from a significant hazard.
3 Days
Code Course Title Overview Duration
CS4 Confined Space - Rescue
This course specifically concentrates on the advanced rescue skills required to provide on-site cover for those working in confined spaces (of any type). It assumes previous qualification in entry and BA, and covers searching, advanced winching and hauling systems, operations in zero visibility, incident management and immediate-response risk assessment (IRRA).
1 Day
CS5Confined Space - Med Risk Re-qualification
This training allows holders of Medium Risk Confined Space Access certificates to refresh their knowledge and skills to gain re-certification. 1 Day
CS6Confined Spaces Access - High Risk Re-qualification
This course is for the requalification of persons holding current Confined Spaces Access certification up to and including High Risk (incorporating full working breathing apparatus).
1 Day
CS7Confined Space - Managers and Supervisors
This training defines the responsibilities of persons managing, planning or overseeing confined space access and provides the knowledge and skills to allow them to safely plan and manage confined space access.
1 Day
AA1 Asbestos - Awareness
The aim of this awareness training course is to provide those attending with the required knowledge and understanding to avoid the risks from asbestos. ½ Day
EI1Eyebolt Installation - Class A1 Anchor Devices
This course provides both the theoretical and practical training to enable personnel to install and inspect Fall Arrest and Abseil anchor devices. ½ Day
PLA1 Portable Ladder - Access
The aim of this half day course is to provide individuals with the necessary knowledge and skills to allow them to plan and undertake work on portable ladders and steps safely.
½ Day
PLI1 Portable Ladder - Inspection
Candidates will learn how competently inspect portable ladders and steps and maintain records. ½ Day
TS1PASMA / non PASMA - Mobile Access Towers
This course covers the theoretical knowledge and practical skills requirements for the safe erection, inspection and dis-assembly of portable tower scaffolds. The training can be PASMA certificated if required.
1 Day
FA1 First Aid at Height This one day course has been developed to deal with first aid incidents at height and in remote outdoor locations when help may be some time away. 1 Day
FA2Appointed Person - Emergency First Aid at Work
This one day course provides delegates with the basic essential skills of First Aid. 1 Day
Utilities
00 800 999 55500www.capitalsafety-training.co.uk
UtilitiesOur comprehensive portfolio of courses have been developed to provide specific training relevant to a diverse range of activities applicable to the utilities industry whether they be at, above, or below ground level. Courses range from specialist applications, including pylon and pole climbing and rescue, confined space access to the more generic training such as first aid, manual handling, PASMA and asbestos awareness.
Whichever course we deliver, you will benefit from our extensive experience and un-rivalled capability to cater to all aspects of the utilities industry. We provide City and Guilds certified confined space courses along with work at height training accredited by relevant bodies. We also offer specific courses for managers and supervisors through to operatives and technicians. As a result, we are well positioned to assist your company in developing or maintaining your existing health and safety management systems on all levels. With our modern approach to training we believe we are the ideal partner for the Utilities industry.
Course Overviews
Utilities
00 800 999 55500 | www.capitalsafety-training.co.uk3M Fall Protection
Code Course Title Overview Duration
HS0 Height Safety - Awareness
This 4 hour training course provides an overview of the requirements of planning and undertaking basic working at height tasks. ½ Day
HS1 Height Safety - Level 1
The aim of this course is to provide a broad overview of work at height requirement and fall protection controls. 1 Day
HS2 Height Safety - Level 2
This training provides the delegate with even more practical climbing and work at height technique practice than the HS1 course and also includes the practical use of rescue equipment in a variety of rescue scenarios.
2 Days
HS3 Height Safety - Level 2 Refresher
The aim of this course is to provide the delegate with an opportunity to refresh their theoretical knowledge and practical skills and gain HS2 re-certification. 1 Day
HS4 Height Safety - PFPE Inspector
This training provides the theoretical knowledge and practical skills which are part of the requirements to be deemed Competent to undertake the statutory inspection of Personal Fall Protection Equipment (PFPE).
1 Day
HS5Height Safety - Managers and Supervisors
This course aims to give a comprehensive understanding of site managers and supervisor’s responsibilities under the relevant legislation. 1 Day
HS7 Height Safety 7 - Rescue
There is a requirement under the Work at Height Regulations to plan and make provision for rescue. This course focuses on workmate rescue procedures applicable to a range of scenarios typically found in the workplace.
1 Day
HS8 Height Safety 8 - Escape
This course will equip those attending with the necessary skills required to evacuate from a high structure, platform or equipment during an emergency. ½ Day
HS9 Height Safety 9 - Demonstrator
On successful completion of this training those attending will be equipped with the skills to deliver maintenance of skills training on specified equipment. 2 Days
HS10Height Safety 10 - Fall Protection and Rescue
Developed in conjunction with manufacturing, production and servicing industries, this course provides essential fall protection and rescue training for operational and maintenance teams.
1 Day
HS11Height Safety 11 - Landscape Maintenance
This training provides the knowledge and skills required to work on steep ground (up to 40 deg) and adjacent to unguarded edges. 1 Day
CS1 Confined Spaces Access - Low Risk
This course is aimed at those persons required to access confined spaces classified as Low Risk. 1 Day
CS2Medium Risk - Incorporating Emergency Breathing Apparatus
This 2 day course is aimed at those persons required to access confined spaces classified as Medium Risk. The course incorporates the use of self contained emergency breathing apparatus for emergency escape.
2 Days
CS3
Confined Space Access - High Risk - Incorporating the use of Self Contained Breathing Apparatus - Rescue
This course is aimed at those persons required to access confined spaces classified as high risk spaces which can be defined as confined spaces where there is a foreseeable risk from a significant hazard.
3 Days
CS4 Confined Space - Rescue
This course specifically concentrates on the advanced rescue skills required to provide on-site cover for those working in confined spaces (of any type). It assumes previous qualification in entry and BA, and covers searching, advanced winching and hauling systems, operations in zero visibility, incident management and immediate-response risk assessment (IRRA).
1 Day
Code Course Title Overview Duration
CS5Confined Space - Med Risk Re-qualification
This training allows holders of Medium Risk Confined Space Access certificates to refresh their knowledge and skills to gain re-certification. 1 Day
CS6Confined Spaces Access - High Risk Re-qualification
This course is for the requalification of persons holding current Confined Spaces Access certification up to and including High Risk (incorporating full working breathing apparatus).
1 Day
CS7Confined Space - Managers and Supervisors
This training defines the responsibilities of persons managing, planning or overseeing confined space access and provides the knowledge and skills to allow them to safely plan and manage confined space access.
1 Day
RT1 ISO 22846 - 1 - Rope Access Technician
This four day course is for those persons who are required to use abseil techniques in order to gain access to and work in difficult locations. 4 Days
RT2 ISO 22846 - 2 - Rope Access Supervisor
This four day course is for those persons who are required to supervise employees using industrial rope access techniques to gain access to difficult and awkward locations.
4 Days
IR1IRATA 1 Rope Access - IRATA Level 1 rope access
The IRATA Level 1 rope access course is the entry level into the IRATA framework, and is aimed at delegates with little or no previous experience. 5 Days
IR2IRATA 2 Rope Access - IRATA Level 2 rope access
IRATA Level 2 Technicians are required to operate at a higher level of skill than a Level 1 Technician, as a consequence those persons attending this course will be trained in advanced rescue and rope access techniques.
5 Days
IR3IRATA 3 Rope Access - IRATA Level 3 rope access
IRATA Level 3 technicians provide supervision and rescue cover for Level 1 and 2 technicians, and delegates will be trained in advanced rescue and rope access techniques.
5 Days
AA1 Asbestos - Awareness
The aim of this awareness training course is to provide those attending with the required knowledge and understanding to avoid the risks from asbestos. ½ Day
EI1Eyebolt Installation - Class A1 Anchor Devices
This course provides both the theoretical and practical training to enable personnel to install and inspect Fall Arrest and Abseil anchor devices. ½ Day
PLA1 Portable Ladder - Access
The aim of this half day course is to provide individuals with the necessary knowledge and skills to allow them to plan and undertake work on portable ladders and steps safely.
½ Day
PLI1 Portable Ladder - Inspection
Candidates will learn how competently inspect portable ladders and steps and maintain records. ½ Day
TS1PASMA / non PASMA - Mobile Access Towers
This course covers the theoretical knowledge and practical skills requirements for the safe erection, inspection and dis-assembly of portable tower scaffolds. The training can be PASMA certificated if required.
1 Day
FA1 First Aid at Height This one day course has been developed to deal with first aid incidents at height and in remote outdoor locations when help may be some time away. 1 Day
FA2Appointed Person - Emergency First Aid at Work
This one day course provides delegates with the basic essential skills of First Aid. 1 Day
MH1 Manual Handling Provides training on the assessment and undertaking of routine manual handling tasks undertaken in all aspects of the industry ½ Day
Construction
00 800 999 55500www.capitalsafety-training.co.uk
ConstructionOur long established reputation for being at the forefront of supporting safety within the construction industry is proven through our equipment and solutions. We can also deliver a wide range of safety training in support of your on-site safety systems. We offer a wide range of efficient training solutions, allowing you to maintain a safe and compliant operation whilst maximising efficiencies. Whether it is work at height, first aid, manual handling, use of scaffolding or MEWP related activities that your staff requires training on, we have the solution. We can train at your premises, or from our own sites around the country.
Course Overviews
00 800 999 55500 | www.capitalsafety-training.co.uk3M Fall Protection
Construction
Code Course Title Overview Duration
HS0 Height Safety - Awareness
This 4 hour training course provides an overview of the requirements of planning and undertaking basic working at height tasks. ½ Day
HS1 Height Safety - Level 1
The aim of this course is to provide a broad overview of work at height requirement and fall protection controls. 1 Day
HS2 Height Safety - Level 2
This training provides the delegate with even more practical climbing and work at height technique practice than the HS1 course and also includes the practical use of rescue equipment in a variety of rescue scenarios.
2 Days
HS3 Height Safety - Level 2 Refresher
The aim of this course is to provide the delegate with an opportunity to refresh their theoretical knowledge and practical skills and gain HS2 re-certification. 1 Day
HS4 Height Safety - PFPE Inspector
This training provides the theoretical knowledge and practical skills which are part of the requirements to be deemed Competent to undertake the statutory inspection of Personal Fall Protection Equipment (PFPE).
1 Day
HS5Height Safety - Managers and Supervisors
This course aims to give a comprehensive understanding of site managers and supervisor’s responsibilities under the relevant legislation. 1 Day
HS7 Height Safety 7 - Rescue
There is a requirement under the Work at Height Regulations to plan and make provision for rescue. This course focuses on workmate rescue procedures applicable to a range of scenarios typically found in the workplace.
1 Day
HS8 Height Safety 8 - Escape
This course will equip those attending with the necessary skills required to evacuate from a high structure, platform or equipment during an emergency. ½ Day
HS9 Height Safety 9 - Demonstrator
On successful completion of this training those attending will be equipped with the skills to deliver maintenance of skills training on specified equipment. 2 Days
HS10Height Safety 10 - Fall Protection and Rescue
Developed in conjunction with manufacturing, production and servicing industries, this course provides essential fall protection and rescue training for operational and maintenance teams.
1 Day
HS11Height Safety 11 - Landscape Maintenance
This training provides the knowledge and skills required to work on steep ground (up to 40 deg) and adjacent to unguarded edges. 1 Day
HS14 Height Safety - Construction
The aim of this on-site training is to provide the theoretical knowledge and practical skills to identify the hazards specific to working at height within the construction industry, evaluate the associated risks and implement the appropriate controls to allow the task to be undertaken safely.
4 Hours
CS1 Confined Spaces Access - Low Risk
This course is aimed at those persons required to access confined spaces classified as Low Risk. 1 Day
CS2Medium Risk - Incorporating Emergency Breathing Apparatus
This 2 day course is aimed at those persons required to access confined spaces classified as Medium Risk. The course incorporates the use of self contained emergency breathing apparatus for emergency escape.
2 Days
CS3
Confined Space Access - High Risk - Incorporating the use of Self Contained Breathing Apparatus - Rescue
This course is aimed at those persons required to access confined spaces classified as high risk spaces which can be defined as confined spaces where there is a foreseeable risk from a significant hazard.
3 Days
Code Course Title Overview Duration
CS4 Confined Space - Rescue
This course specifically concentrates on the advanced rescue skills required to provide on-site cover for those working in confined spaces (of any type). It assumes previous qualification in entry and BA, and covers searching, advanced winching and hauling systems, operations in zero visibility, incident management and immediate-response risk assessment (IRRA).
1 Day
CS5Confined Space - Med Risk Re-qualification
This training allows holders of Medium Risk Confined Space Access certificates to refresh their knowledge and skills to gain re-certification. 1 Day
CS6Confined Spaces Access - High Risk Re-qualification
This course is for the requalification of persons holding current Confined Spaces Access certification up to and including High Risk (incorporating full working breathing apparatus).
1 Day
CS7Confined Space - Managers and Supervisors
This training defines the responsibilities of persons managing, planning or overseeing confined space access and provides the knowledge and skills to allow them to safely plan and manage confined space access.
1 Day
RT1 ISO 22846 - 1 - Rope Access Technician
This four day course is for those persons who are required to use abseil techniques in order to gain access to and work in difficult locations. 4 Days
RT2 ISO 22846 - 2 - Rope Access Supervisor
This four day course is for those persons who are required to supervise employees using industrial rope access techniques to gain access to difficult and awkward locations.
4 Days
IR1IRATA 1 Rope Access - IRATA Level 1 rope access
The IRATA Level 1 rope access course is the entry level into the IRATA framework, and is aimed at delegates with little or no previous experience. 5 Days
IR2IRATA 2 Rope Access - IRATA Level 2 rope access
IRATA Level 2 Technicians are required to operate at a higher level of skill than a Level 1 Technician, as a consequence those persons attending this course will be trained in advanced rescue and rope access techniques.
5 Days
IR3IRATA 3 Rope Access - IRATA Level 3 rope access
IRATA Level 3 technicians provide supervision and rescue cover for Level 1 and 2 technicians, and delegates will be trained in advanced rescue and rope access techniques.
5 Days
AA1 Asbestos - Awareness
The aim of this awareness training course is to provide those attending with the required knowledge and understanding to avoid the risks from asbestos. ½ Day
EIC1Eyebolt Installation - Class A1 Anchor Devices
This course provides both the theoretical and practical training to enable personnel to install and inspect Fall Arrest and Abseil anchor devices. ½ Day
PLA1 Portable Ladder - Access
The aim of this half day course is to provide individuals with the necessary knowledge and skills to allow them to plan and undertake work on portable ladders and steps safely.
½ Day
PLI1 Portable Ladder - Inspection
Candidates will learn how competently inspect portable ladders and steps and maintain records. ½ Day
TS1PASMA / non PASMA - Mobile Access Towers
This course covers the theoretical knowledge and practical skills requirements for the safe erection, inspection and dis-assembly of portable tower scaffolds. The training can be PASMA certificated if required.
1 Day
FA1 First Aid at Height This one day course has been developed to deal with first aid incidents at height and in remote outdoor locations when help may be some time away. 1 Day
FA2Appointed Person - Emergency First Aid at Work
This one day course provides delegates with the basic essential skills of First Aid. 1 Day
MH1 Manual Handling Provides training on the assessment and undertaking of routine manual handling tasks undertaken in all aspects of the industry ½ Day
Telecoms
00 800 999 55500www.capitalsafety-training.co.uk
TelecomsWith 15 years’ experience in the provision of training solutions to this ever changing and ever growing industry, we offer approved training which will meet your specific requirements. Our training includes roofworker, tower climber and rescue, RF and asbestos awareness courses. We also offer rope access (IRATA & ISO certified); rigging, lifting, and slinging courses. We pride ourselves with understanding our customers and their requirements, working with you to develop and maintain a skilled, resourceful and safe workforce.
Course Overviews
00 800 999 55500 | www.capitalsafety-training.co.uk3M Fall Protection
Telecoms
Code Course Title Overview Duration
TC1 Rooftop Safety - Awareness
The course will cover the identification of rooftop hazards and of associated risks, highlighting the difference between safe and unsafe roof tops, requirements for guardrails, barriers and safe access, radio frequency and suggest good working practices.
½ Day
TC2 Roof Worker - Arqiva Approved
Students are taught to identify and deal with hazards and risks commonly associated with this type of work, training will also cover the correct selection and use of personal fall protection equipment (PFPE) applicable to rooftop working.
1 Day
TC3 Basic Tower Climber
This course provides a solid foundation for those new to the telecommunications industry and introduces prospective climbers to work on communications masts and towers.
1 Day
TC4 Advanced Tower Climber
For those accessing all areas on communications masts and towers, this course will provide students with the knowledge and skills to them to work safely at height.
1 Day
TC5 Basic Lifting and Slinging
This course includes the planning, rigging and use of basic tower lifting rigs to lift loads of up to 500Kg onto telecoms mast and tower structures. 1 Day
TC6 RF Safety Awareness Arqiva Approved
This course aims to provide delegates with the ability to recognise the known hazards associated with working in proximity to radio frequency fields commonly found on rooftops and communications towers.
½ Day
TC7 Tower Rescue This course will equip those attending with the skills required to undertake the rescue of an injured workmate stranded on a mast or tower. 1 Days
RT1 ISO 22846 - 1 - Rope Access Technician
This four day course is for those persons who are required to use abseil techniques in order to gain access to and work in difficult locations. 4 Days
RT2 ISO 22846 - 2 - Rope Access Supervisor
This four day course is for those persons who are required to supervise employees using industrial rope access techniques to gain access to difficult and awkward locations.
4 Days
IR1IRATA 1 Rope Access - IRATA Level 1 rope access
The IRATA Level 1 rope access course is the entry level into the IRATA framework, and is aimed at delegates with little or no previous experience. 5 Days
IR2IRATA 2 Rope Access - IRATA Level 2 rope access
IRATA Level 2 Technicians are required to operate at a higher level of skill than a Level 1 Technician, as a consequence those persons attending this course will be trained in advanced rescue and rope access techniques.
5 Days
IR3IRATA 3 Rope Access - IRATA Level 3 rope access
IRATA Level 3 technicians provide supervision and rescue cover for Level 1 and 2 technicians, and delegates will be trained in advanced rescue and rope access techniques.
5 Days
Code Course Title Overview Duration
TR1 Technical Rescue - Operative
This course is intended for those persons working in rescue teams, this 5 day course concentrates on all aspects of rescue and evacuation from height. 5 Days
TR2 Technical Rescue - Team Leader
This course is intended for those persons working in specialist rescue teams. This 5 day course concentrates on rigging and planning of rope rescues, with a Leader controlling a small group of Operatives.
5 Days
AA1 Asbestos - Awareness
The aim of this awareness training course is to provide those attending with the required knowledge and understanding to avoid the risks from asbestos. ½ Day
EIC1Eyebolt Installation - Class A1 Anchor Devices
This course provides both the theoretical and practical training to enable personnel to install and inspect Fall Arrest and Abseil anchor devices. ½ Day
PLA1 Portable Ladder - Access
The aim of this half day course is to provide individuals with the necessary knowledge and skills to allow them to plan and undertake work on portable ladders and steps safely.
½ Day
PLI1 Portable Ladder - Inspection
Candidates will learn how competently inspect portable ladders and steps and maintain records. ½ Day
TS1PASMA / non PASMA - Mobile Access Towers
This course covers the theoretical knowledge and practical skills requirements for the safe erection, inspection and dis-assembly of portable tower scaffolds. The training can be PASMA certificated if required.
1 Day
FA1 First Aid at Height This one day course has been developed to deal with first aid incidents at height and in remote outdoor locations when help may be some time away. 1 Day
FA2Appointed Person - Emergency First Aid at Work
This one day course provides delegates with the basic essential skills of First Aid. 1 Day
MH1 Manual Handling Provides training on the assessment and undertaking of routine manual handling tasks undertaken in all aspects of the industry ½ Day
00 800 999 55500www.capitalsafety-training.co.uk
Transport
TransportWith extensive experience of working in partnership with a range of transport companies serving the rail, road, maritime and aviation industries, our knowledge and understanding of what is needed to meet the high expectations of this industry have been proven time and again. We are able to cater for the transport industry with a range of height safety, confined space and rescue courses; as well as awareness courses for both asbestos and first aid.
Course Overviews
00 800 999 55500 | www.capitalsafety-training.co.uk3M Fall Protection
Transport
Code Course Title Overview Duration
HS0 Height Safety - Awareness
This 4 hour training course provides an overview of the requirements of planning and undertaking basic working at height tasks. ½ Day
HS1 Height Safety - Level 1
The aim of this course is to provide a broad overview of work at height requirement and fall protection controls. 1 Day
HS2 Height Safety - Level 2
This training provides the delegate with even more practical climbing and work at height technique practice than the HS1 course and also includes the practical use of rescue equipment in a variety of rescue scenarios.
2 Days
HS3 Height Safety - Level 2 Refresher
The aim of this course is to provide the delegate with an opportunity to refresh their theoretical knowledge and practical skills and gain HS2 re-certification. 1 Day
HS4 Height Safety - PFPE Inspector
This training provides the theoretical knowledge and practical skills which are part of the requirements to be deemed Competent to undertake the statutory inspection of Personal Fall Protection Equipment (PFPE).
1 Day
HS5Height Safety - Managers and Supervisors
This course aims to give a comprehensive understanding of site managers and supervisor’s responsibilities under the relevant legislation. 1 Day
HS7 Height Safety 7 - Rescue
There is a requirement under the Work at Height Regulations to plan and make provision for rescue. This course focuses on workmate rescue procedures applicable to a range of scenarios typically found in the workplace.
1 Day
HS8 Height Safety 8 - Escape
This course will equip those attending with the necessary skills required to evacuate from a high structure, platform or equipment during an emergency. ½ Day
HS9 Height Safety 9 - Demonstrator
On successful completion of this training those attending will be equipped with the skills to deliver maintenance of skills training on specified equipment. 2 Days
HS10Height Safety 10 - Fall Protection and Rescue
Developed in conjunction with manufacturing, production and servicing industries, this course provides essential fall protection and rescue training for operational and maintenance teams.
1 Day
HS11Height Safety 11 - Landscape Maintenance
This training provides the knowledge and skills required to work on steep ground (up to 40 deg) and adjacent to unguarded edges. 1 Day
HS13Height Safety 13 - Workshop Environment
This course provides work at height training for workers who are required to use overhead fall arrest lifelines and Self-Retracting Lifelines (SRL) within workshops, maintenance and manufacturing facilities.
½ Day
CS1 Confined Spaces Access - Low Risk
This course is aimed at those persons required to access confined spaces classified as Low Risk. 1 Day
CS2Medium Risk - Incorporating Emergency Breathing Apparatus
This 2 day course is aimed at those persons required to access confined spaces classified as Medium Risk. The course incorporates the use of self contained emergency breathing apparatus for emergency escape.
2 Days
CS3
Confined Space Access - High Risk - Incorporating the use of Self Contained Breathing Apparatus
This course is aimed at those persons required to access confined spaces classified as high risk spaces which can be defined as confined spaces where there is a foreseeable risk from a significant hazard.
3 Days
Code Course Title Overview Duration
CS4 Confined Space - Rescue
This course specifically concentrates on the advanced rescue skills required to provide on-site cover for those working in confined spaces (of any type). It assumes previous qualification in entry and BA, and covers searching, advanced winching and hauling systems, operations in zero visibility, incident management and immediate-response risk assessment (IRRA).
1 Day
CS5Confined Space - Med Risk Re-qualification
This training allows holders of Medium Risk Confined Space Access certificates to refresh their knowledge and skills to gain re-certification. 1 Day
CS6Confined Spaces Access - High Risk Re-qualification
This course is for the requalification of persons holding current Confined Spaces Access certification up to and including High Risk (incorporating full working breathing apparatus).
1 Day
CS7Confined Space - Managers and Supervisors
This training defines the responsibilities of persons managing, planning or overseeing confined space access and provides the knowledge and skills to allow them to safely plan and manage confined space access.
1 Day
TR1 Technical Rescue - Operative
This course is intended for those persons working in specialist rescue teams, this 5 day course concentrates on all aspects of rescue and evacuation from height.
5 Days
TR2 Technical Rescue - Technical Rescue
This course is intended for those persons working in specialist rescue teams. This 5 day course concentrates on rigging and planning of rope rescues, with a Leader controlling a small group of Operatives.
5 Day
AA1 Asbestos - Awareness
The aim of this awareness training course is to provide those attending with the required knowledge and understanding to avoid the risks from asbestos. ½ Day
EIC1Eyebolt Installation - Class A1 Anchor Devices
This course provides both the theoretical and practical training to enable personnel to install and inspect Fall Arrest and Abseil anchor devices. ½ Day
PLA1 Portable Ladder - Access
The aim of this half day course is to provide individuals with the necessary knowledge and skills to allow them to plan and undertake work on portable ladders and steps safely.
½ Day
PLI1 Portable Ladder - Inspection
Candidates will learn how competently inspect portable ladders and steps and maintain records. ½ Day
TS1PASMA / non PASMA - Mobile Access Towers
This course covers the theoretical knowledge and practical skills requirements for the safe erection, inspection and dis-assembly of portable tower scaffolds. The training can be PASMA certificated if required.
1 Day
FA1 First Aid at Height This one day course has been developed to deal with first aid incidents at height and in remote outdoor locations when help may be some time away. 1 Day
FA2Appointed Person - Emergency First Aid at Work
This one day course provides delegates with the basic essential skills of First Aid. 1 Day
MH1 Manual Handling Provides training on the assessment and undertaking of routine manual handling tasks undertaken in all aspects of the industry ½ Day
00 800 999 55500www.capitalsafety-training.co.uk
Wind Energy
Wind EnergyWe are able to offer the full suite of RUK and GWO approved courses, delivered as either individual courses or as bespoke bundles. Our main training facilities include a 30 m decommissioned wind turbine and full size training hub allowing us to offer a uniquely realistic training experience. To supplement the basic industry training requirements, we offer a range of specific advanced rescue and first aid courses to meet your operational needs. We also offer support and advisory services, in the form of bespoke packages, courses, consultancy and managed services, to assist you with specific operational requirements.
Course Overviews
00 800 999 55500 | www.capitalsafety-training.co.uk3M Fall Protection
Wind Energy
Code Course Title Overview Duration
GW01 GWO / RUK Working at Height
Provides the Basic Safety Training requirements for working at height within the wind energy industry. GWO and Renewable UK accredited training. 2 Days
GWO2 GWO - First Aid The course will enable the delegate to meet emergency 1st Aid response training requirements for personnel new to the global wind industry. 2 Days
GWO3 GWO - Manual Handling
Provides the required training for the assessment and undertaking of manual handling tasks within the wind energy sector. ½ Day
GWO4 GWO - Fire Awareness
Provides the required training in the awareness of the causes hazards of fires within the wind energy sector and the method of extinguishing small, contained fires.
½ Day
GWO5 GWO / RUK Sea Survival
This course provides the sea survival training required for off-short wind farms. Training can be provided that meets the requirement of both GWO and RUK.
1.5 days (2 days RUK)
GWO6 GWO Combined (5 modules)
To minimize operational disruption and to provide efficient, effective training we can provide a 'bundled' training package which would include GWO1, 2, 3, 4 & 5 (if required).
6.5 days, 7 days for RUK MST
GWO7 GWO - Working at Height Refresher
The aim of this course is to provide individuals with the theoretical knowledge and practical skills required to refresh and maintain the required level of competence to: safely access wind turbines using fixed ladders; rescue a colleague from suspension in PFPE; escape from a wind turbine using an auto descender.
1 Day
GWO8 GWO - First Aid Refresher
The aim of this refresher course is to review and build on previously gained knowledge and skills from BST First Aid so that delegates can administer safe and effective First Aid in the wind industry.
1 Day
WE2 Hub Rescue
This course is designed to give delegates the knowledge and practical skill required in order to extract a casualty from a restricted space within a wind turbine using rescue equipment applicable to that issued by your employer for this purpose.
1 Day
WE4 Advanced Rescue
This course has been developed to meet the needs of the wind turbine industry, and is designed to equip those attending with the knowledge and skills required to rescue a colleague from a range of different situations on wind turbine generators (WTG).
2 Days
WE5 Met Mast Climber / Rescue
During this course delegates are provided with the essential practical and theoretical information needed in order to safely use fall protection equipment to access and work on lattice towers and masts.
1 Day
WE6 Lifting and Slinging for WTGs
Provides essential knowledge and practical skills for the slinging, raising and lowering of loads using on-board lifting appliances. 1/2 day
Code Course Title Overview Duration
IR1IRATA 1 Rope Access - IRATA Level 1 rope access
The IRATA Level 1 rope access course is the entry level into the IRATA framework, and is aimed at delegates with little or no previous experience. 5 Days
IR2IRATA 2 Rope Access - IRATA Level 2 rope access
IRATA Level 2 Technicians are required to operate at a higher level of skill than a Level 1 Technician, as a consequence those persons attending this course will be trained in advanced rescue and rope access techniques.
5 Days
IR3IRATA 3 Rope Access - IRATA Level 3 rope access
IRATA Level 3 technicians provide supervision and rescue cover for Level 1 and 2 technicians, and delegates will be trained in advanced rescue and rope access techniques.
5 Days
EI1Eyebolt Installation - Class A1 Anchor Devices
This course provides both the theoretical and practical training to enable personnel to install and inspect Fall Arrest and Abseil anchor devices. ½ Day
PLA1 Portable Ladder - Access
The aim of this half day course is to provide individuals with the necessary knowledge and skills to allow them to plan and undertake work on portable ladders and steps safely.
½ Day
PLI1 Portable Ladder - Inspection
Candidates will learn how competently inspect portable ladders and steps and maintain records. ½ Day
TS1PASMA / non PASMA - Mobile Access Towers
This course covers the theoretical knowledge and practical skills requirements for the safe erection, inspection and dis-assembly of portable tower scaffolds. The training can be PASMA certificated if required.
1 Day
00 800 999 55500www.capitalsafety-training.co.uk
Oil & Gas
Oil & GasThrough our years of providing equipment and support to the oil and gas industry across all regions and continents, we have gained an in-depth understanding of the challenges and risks associated within the industry. This experience has helped us to develop and deliver courses specifically created for the oil and gas sector requirements, delivered by trainers who understand your business operations. We are an IADC accredited and ISO certified training provider.
Course Overviews
00 800 999 55500 | www.capitalsafety-training.co.uk3M Fall Protection
Oil & Gas
Code Course Title Overview Duration
HS0 Height Safety - Awareness
This 4 hour training course provides an overview of the requirements of planning and undertaking basic working at height tasks. ½ Day
HS1 Height Safety - Level 1
The aim of this course is to provide a broad overview of work height requirement and fall protection controls. 1 Day
HS2 Height Safety - Level 2
This training provides the delegate with even more practical climbing and work at height technique practice than the HS1 course and also includes the practical use of rescue equipment in a variety of rescue scenarios.
2 Days
HS3 Height Safety - Level 2 Refresher
The aim of this course is to provide the delegate with an opportunity to refresh their theoretical knowledge and practical skills and gain HS2 re-certification. 1 Day
HS4 Height Safety - PFPE Inspector
This training provides the theoretical knowledge and practical skills which are part of the requirements to be deemed Competent to undertake the statutory inspection of Personal Fall Protection Equipment (PFPE).
1 Day
HS5Height Safety - Managers and Supervisors
This course aims to give a comprehensive understanding of site managers and supervisor’s responsibilities under the relevant legislation. 1 Day
HS7 Height Safety 7 - Rescue
There is a requirement under the Work at Height Regulations to plan and make provision for rescue. This course focuses on workmate rescue procedures applicable to a range of scenarios typically found in the workplace.
1 Day
HS8 Height Safety 8 - Escape
This course will equip those attending with the necessary skills required to evacuate from a high structure, platform or equipment during an emergency. ½ Day
HS9 Height Safety 9 - Demonstrator
On successful completion of this training those attending will be equipped with the skills to deliver maintenance of skills training on specified equipment. 2 Days
HS10Height Safety 10 - Fall Protection and Rescue
The aim of this course is to provide those attending with a comprehensive understanding of the requirements for accessing a structure via a fixed ladder or similar and the requirements for rescue from them.
1 Day
CS1 Confined Spaces Access - Low Risk
This course is aimed at those persons required to access confined spaces classified as Low Risk. 1 Day
CS2Medium Risk - Incorporating Emergency Breathing Apparatus
This 2 day course is aimed at those persons required to access confined spaces classified as Medium Risk. The course incorporates the use of self contained emergency breathing apparatus for emergency escape.
2 Days
CS3
Confined Space Access - High Risk - Incorporating the use of Self Contained Breathing Apparatus - Rescue
This course is aimed at those persons required to access confined spaces classified as high risk spaces which can be defined as confined spaces where there is a foreseeable risk from a significant hazard.
3 Days
CS4 Confined Space - Rescue
This course specifically concentrates on the advanced rescue skills required to provide on-site cover for those working in confined spaces (of any type). It assumes previous qualification in entry and BA, and covers searching, advanced winching and hauling systems, operations in zero visibility, incident management and immediate-response risk assessment (IRRA).
1 Day
CS5Confined Space - Med Risk Re-qualification
This training allows holders of Medium Risk Confined Space Access certificates to refresh their knowledge and skills to gain re-certification. 1 Day
CS6Confined Spaces Access - High Risk Re-qualification
This course is for the requalification of persons holding current Confined Spaces Access certification up to and including High Risk (incorporating full working breathing apparatus).
1 Day
Code Course Title Overview Duration
CS7Confined Space - Managers and Supervisors
This training defines the responsibilities of persons managing, planning or overseeing confined space access and provides the knowledge and skills to allow them to safely plan and manage confined space access.
1 Day
OG2 Fall Protection
This course is for individuals that are responsible for the supervision, implementation and monitoring of a managed fall protection program. This course is a pass / fail program, it incorporates extensive classroom and hands- on training and both written and practical assessments that are based on the requirements of the US OSHA Regulations, ANSI Z359.2 standard and CSA.
2 Days
OG3 Fall Protection - Trainer
The Fall Protection trainer program focuses on practical teaching and techniques in order to provide a trainer the ability to instruct a four hour fall protection awareness course to fellow company employees. Legibility for this training program is subject to the agreement of specific requirements and conditions .
5 Days
OG4 Fall Protection - Refresher
This course provides a refreshment and assessment of relevant knowledge and skills required for the re-certification of OG2 trained persons. 1 Day
IR1IRATA 1 Rope Access - IRATA Level 1 rope access
The IRATA Level 1 rope access course is the entry level into the IRATA framework, and is aimed at delegates with little or no previous experience. 5 Days
IR2IRATA 2 Rope Access - IRATA Level 2 rope access
IRATA Level 2 Technicians are required to operate at a higher level of skill than a Level 1 Technician, as a consequence those persons attending this course will be trained in advanced rescue and rope access techniques.
5 Days
IR3IRATA 3 Rope Access - IRATA Level 3 rope access
IRATA Level 3 technicians provide supervision and rescue cover for Level 1 and 2 technicians, and delegates will be trained in advanced rescue and rope access techniques.
5 Days
EIC1Eyebolt Installation - Class A1 Anchor Devices
This course provides both the theoretical and practical training to enable personnel to install and inspect Fall Arrest and Abseil anchor devices. ½ Day
TR1 Technical Rescue - Operative
This course is intended for those persons working in specialist rescue teams, this 5 day course concentrates on all aspects of rescue and evacuation from height.
5 Days
TR2 Technical Rescue - Team Leader
This course is intended for those persons working in specialist rescue teams. This 5 day course concentrates on rigging and planning of rope rescues, with a Leader controlling a small group of Operatives.
5 Days
PLA1 Portable Ladder - Access
The aim of this half day course is to provide individuals with the necessary knowledge and skills to allow them to plan and undertake work on portable ladders and steps safely.
½ Day
PLI1 Portable Ladder - Inspection
Candidates will learn how competently inspect portable ladders and steps and maintain records. ½ Day
TS1PASMA / non PASMA - Mobile Access Towers
The aim of the training is to provide candidates with the necessary information to safely erect, use, inspect and dismantle aluminium or fibreglass mobile access towers.
1 Day
FA1 First Aid at Height This one day course has been developed to deal with first aid incidents at height and in remote outdoor locations when help may be some time away. 1 Day
FA2Appointed Person - Emergency First Aid at Work
This one day course provides delegates with the basic essential skills of First Aid. 1 Day
00 800 999 55500www.capitalsafety-training.co.uk
Technical Services
Technical Services3M have a long established reputation for supporting a wide range of industries by providing innovative solutions backed by technical know-how. This support service is particularly relevant when we are considering the safety of people at work. Selecting, sourcing and maintaining the most appropriate fall protection solution can be a complicated, but important undertaking. So why not call upon the technical experts at the 3M Personal Safety Division? Our technical support team can work with you to review your operational requirements and implement effective solutions especially tailored to you. From advice on a particular issue to a complete bespoke managed service incorporating consultancy, equipment specifying and supply, training and inspection services, we can help.
Technical Services
Technical Services
3M Fall Protection
3M is a trademarks of 3M Company.
©3M 2017. All rights reserved.
• Consultancy services
• On-site needs analysis and reporting
• Development of work at height, risk analysis, policies and procedures
• Rescue plan preparation and facilitation
• Equipment specifications
• Bespoke training solutions
• On-site statutory fall arrest equipment/system inspections
• Inspection of small quantities through a courier pick up/ return service
• Specialist access solutions
• Fall protection asset control and recording - 3M Connected Safety platform
• Specialist installation services including off-shore and on-vessel installations
• LGV fall protection systems
• Block servicing and repair.
3M Belgium BVBA / SPRLHermeslaan 71831 DiegemBelgië / BelgiqueE-mail: [email protected]
3M DanmarkHannemanns Allé 532300 København SDanmarkE-mail: [email protected]
3M Deutschland GmbHCarl-Schurz-Straße 1D - 41453 NeussDeutschlandE-mail: [email protected]
3M Espana, S.A.Juan Ignacio Luca de Tena, 19-2528027 MadridEspanaE-mail:[email protected]/es/seguridad
3M FranceBoulevard de l’Oise95006 Cergy Pontoise CedexFrancewww.3M.com/fr/securite
3M Greece20 Kifissias Ave. 151 25 MaroussiAthens, Greecewww.3M.com/gr/occsafety
3M Safety Training Centres.
UKWaterside Mill, Chew Valley RoadGreenfield, OL3 7NH, UKt: +44 (0) 1457 87 86 40 E-mail: [email protected]
France7, Rue Du Commandant D’estienne D’orves, 92390 Villeneuve La Garenne, Paris, Francet: +33 (0) 1 47 82 34 91f: +33 (0) 1 46 52 40 45
GermanyFangdieckstraße 5 3 D-22547 Hamburg, Germanyt: +49 (0) 40 54 75 27 44f: +33 (0) 4 93 08 79 70
3M Ireland Limited The lveagh BuildingThe Park, CarrickminesDublin 18IrelandE-mail: [email protected]/safety
3M Italia srlVia Norberto Bobbio, 2120096 Pioltello MlItaliaE-mail: [email protected]
3M Nederland B.V.Molengraaffsingel 292629 JD DelftNederlandE-mail: [email protected]
3M Norge A/SPostboks 100, 2026 SkjettenNorgeE-mail: [email protected]/vern
3M Österreich GmbHKranichberggasse 41120 WienÖbsterreichwww.3M.com/at/arbeitsschutz
3M PortugalRua do Conde Redondo, 981169-009 LisbonaPortugalwww.3M.com/pt/seguranca
3M Suisse S.a r.l. / Schweiz GmbhEggstrasse 938803 RüschlikonSuisse / Schweizwww.3M.com/ch/safety
Suomen 3M OyKeilaranta 602150 EspooSuomiwww.3M.fi/suojaimet
3M Svenska AB191 89 SollentunaSverigeE-mail: [email protected]/personskydd
3M United Kingdom PLC3M CentreCain RoadBracknellRG12 8HTUnited KingdomE-mail: [email protected]/safety
Please recycle. Printed in the U.K. ©3M 2017. All rights reserved.
3M, DBI-SALA and Protecta are trademarks of 3M Company and its Affiliates.
3M Fall Protection
Capital Safety Group (NE) Ltd 5a Merse Road, North Moons Moat Redditch, B98 9HL, UK
Capital Safety Group (EMEA) Le Broc Center, Bâtiment A, Z.1. 1re Avenue – BP15 06511 Carros Le Broc, Cedex, FRANCE
Phone 00 800 999 55500 Email [email protected] Web 3M.com/FallProtection
Registered address: 3M Centre, Cain Road, Bracknell, Berkshire, RG12 8HT. Registered in England and Wales No. 1918922.
