Date post: | 13-Apr-2017 |
Category: |
Education |
Upload: | slope-project |
View: | 217 times |
Download: | 0 times |
Cork. January 2016
Project SLOPE1
WP 8 Openness with other activities, dissemination and exploitation of results
Cork. January 2016
T.8.1 Dissemination planning and publications results.
Juan de Dios Daz, ITENE
Cork. January 2016
WP8
DELIVERABLE Dissemination plan II (available at Dropbox)
A general document with all the planned dissemination activities and the material to achieve a large diffusion of project results was prepared.
An overview of the activities is included here:
2 0 1 4 2 0 1 5 2 0 1 61 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
DISSEMINATION STRATEGY (3 rep.)BROCHUREPROJECT WEBSITEWEB 2.0NEWSLETTERS (6)POSTERTRADE FAIRS, DEMOSTECHNICAL WORKSHOPS (4)FINAL CONFERENCE (1)RELATED PROJECTS FORUMS (5)SCIENTIFIC PUBLICATIONS (4)PRESS RELEASES (4)
Hoja1
201420152016
123456789101112131415161718192021222324252627282930313233343536
DISSEMINATION STRATEGY (3 rep.)
BROCHURE
PROJECT WEBSITE
WEB 2.0
NEWSLETTERS (6)
POSTER
TRADE FAIRS, DEMOS
TECHNICAL WORKSHOPS (4)
FINAL CONFERENCE (1)
RELATED PROJECTS FORUMS (5)
SCIENTIFIC PUBLICATIONS (4)
PRESS RELEASES (4)
201420152016
123456789101112131415161718192021222324252627282930313233343536
RELATED PROJECTS FORUMS (5)
Hoja2
Hoja3
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
1) DISSEMINATION PLAN
Deliverable8.022_Dissemination_Plan submitted.
Available at Dropbox
NEXT UPDATE: JUNE 2016
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
2) BROCHURE. New brochure produced
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
2) BROCHURE. New brochure produced
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
2) BROCHURE.
Adittionally, an infographic has been completed during thisperiod
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
2) PROJECT WEBSITE. Updated regularly by GRAPHITEC www.slopeproject.eu
http://www.slopeproject.eu/
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
3) SOCIAL MEDIA.
Social media Channelsare regularly updatedwith all the information.
Please send usinformation or mentionus in your social comments.
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
4) NEWSLETTER.
Newsletter 2 & 3 Published during 2015Next issues: March 2016, September 2016, December 2016
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
5) POSTER. Completed.
Physical roll-up with a brief presentation of the project
Available for the partners which will need it.
To be used during conferences and dissemination activities.
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
6) EVENTS
Trade Fairs / Forum attended by partners presenting SLOPE project:
NAME TYPE PLACE STARTING DATE PERIOD CWL COASTWAY
ASTURFORESTA Trade Fair Asturias (Spain) 18/06/2015 20/06/2015 GREIFENBERG
NATO CAX forum 2015 Forum Vicenza (Italy) 28/11/2015 29/11/2015 GRAPHITEC
TEDex 2015 Forum Trento (Italy) 28/11/2015 28/11/2015 GRAPHITEC
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
6) EVENTS
Trade Fairs 2016: Confirmed
Others:
NAME TYPE PLACE STARTING DATE DURATION CNR-IVALSA
CWL COASTWAY
MHG SYSTEMS BOKU FLYBY GREIFEN-BERG
Agri Verona Trade Fair Verona, Italy 01/02/2016 feb-16 x
Kwf-Tagung Trade Fair Demo Roding Bayern, Germany
09/06/2016 9-12/06/2016 x
EIMA Trade Fair Bolonia, Italy 09/11/2016 09-13/11/2016 x x
Interforst Trade Fair Munich, Germany July 2018 July 2018 x
NAME TYPE PLACE STARTING DATE DURATIONSAM Trade Fair Grenoble, France 23/04/2016 23-24/4/2016MellanskogsElmia Trade Fair Sala, Sweden 19/08/2016 19-20/08/2016APF Trade Fair Alcester, UK 15/08/2016 15-17/08/2016Pap-For Trade Fair Saint Petersburg, Russia 25/10/2016 25-28/10/2016
LIGNA Trade Fair Hannover, Germany 22/05/2016 22-26/05/2016WoodMac 2017 Trade Fair China 07/03/2017 7-9/03/2017Interforst Trade Fair Munich, Germany 07/18 07/18
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
6) EVENTS: Conferences attended by partners presenting Slope Projects:NAME TYPE PLACE STARTING DATE PERIOD MHG SYSTEMSWorkshop on Hyperspectral Imaging Workshop Vienna 20/03/2015 20/03/2015 BOKU
9th GEO European Projects Workshop - Workshop Copenhagen 15/06/2015 15/06/2015 GRAPHITEC
20th International Conference on 3D Web Technology (Web3D 2015). Conference Crete, Greece 18/06/2015 21/06/2015
GRAPHITEC
15th International Multidisciplinary Scientific GeoConference & Expo SGEM 2015 Conference Albena (Bulgaria) 16/06/2015 25/06/2016
GRAPHITEC
Forestech 2015 Conference New Zealand 19/11/2015 21/11/2015 TREEMETRICS
3rd International Conference on Structural Health Assessment of Timber Structures Conference Poland 09/09/2015 11/09/2015
CNR-IVALSA
22 IWMS Conference Quebec (Canada) 14/06/2015 17/06/2015 CNR-IVALSA
17th International Conference on Near Infrared Spectroscopy (ICNIRS 2015) Conference Brazil 18/10/2015 23/10/2015
CNR-IVALSA
FORMEC 2015 Conference Linz (Austria) 6/10/2015 07/10/2015ALL
International Conferences in Central Europe on Computer Graphics, Visualization and Computer Vision (WSCG) 2015 Conference Pilsen 19/05/2015 25/06/2015
GRAPHITEC
Human Computer Interaction International (HCII 2015) Poster pres. Los Angeles (USA) August 2015 August 2015
GRAPHITEC
European Data Forum 2015 Poster Presentation Luxembourg 16/11/2015 17/11/2015GRAPHITEC
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
6) EVENTS 2016Confirmed:
Others:
NAME TYPE PLACE STARTING DATE DURATION CNR-IVALSA
GRAPHITECH MHG SYSTEMS
BOKU
IVAPP 2016 Conference Rome, Italy 27/02/2016 27-29/02/2016 xACHI 2016 Conference Venice, Italy 24/04/2016 24-28/04/2016 xCHI 2016 Conference San Jose, (California),
USA07/05/2016 7-12/05/2016 x
FORMEC 2016 Symposium Warszaw, Poland 20/09/2016 20-22/09/2016 x x x
NAME TYPE PLACE STARTING DATE DURATIONSSAFR 2015 Conference Uppsala, Sweden 19/08/2015 19-21/08/2015
WFC World Forestal Congress Congress Durban 07/09/2015 7-11/09/2015EFI 2015 Conference Saint Petersburg, Russia 30/09/2015 30/09-2/10/2015
Conference on Machine Learning and Computing (ICMLC 2016)
Conference Hong Kong, China 22/02/2016 22-23/02/2016
Conference on Machine Learning and Comuping (ICMLC 2016)
Conference Eugene (Oregon), USA 25/02/2016 25-27/02/2016
AusTimber 2016 Conference Traralgon (Victoria), Australia 11/06/2016 11-16/04/2016
AGIT 2016 Conference Salzburg, Austria 07/2016 07/2016
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
6) Detailed Report of Conferences /Articles 2015 (Last 6 months):
CNR-IVALSA CONFERENCES:
Jakub Sandak, Kazimierz Orlowski Tomasz Ochrymiuk, Anna Sandak, Mariapaola Riggio (2015) An alternative way of determining mechanical properties of wood by means of cutting forces. Journal of Heritage Conservation, (Wiadomosci Konserwatorskie) ISNN 0860-2395, Proceedings of Shatis 2015 3rd International Conference on Structural Health Assessment of Timber Structures, 1:543-551.
Jakub Sandak (2015) SLOPE project appraoch to estimate log quality by measuring cutting forces. Proceedings of 22 IWMS, Quebec, Canada, 14-17 June, ISBN: 978-0-9947964-0-0, 135-146pp
Anna Sandak, Jakub Sandak, Katharina Bhm (2015) NIR as a toll for determination of log/biomass quality index in mountain forests SLOPE project approach. 17th International Conference on Near Infrared Spectroscopy (ICNIRS 2015)
Gianni Picchi, Martin Kuhmaier, Juan de Dios Diaz Marques (2015). Survival Test of RFID UHF Tags in Timber Harvesting Operations. Oral presentation at FORMEC Conference, Linz 6-7 October 2015, Austria. pp. 460 ISBN 978-3-900932-29-9
Gianni Picchi, Martin Kuhmaier, Juan de Dios Diaz Marques (2015). Evaluation of RFID UHF tags for electronic marking of standing trees. Oral presentation at FORMEC Conference, Linz 6-7 October 2015, Austria. pp. 37-44. ISBN 978-3-900932-29-9
ISI PUBLICATIONS
Anna Sandak, Jakub Sandak, Mariapaola Riggio (2015) Estimation of physical and mechanical properties of timber members in service by means of infrared spectroscopy. Construction and Building Materials (doi:10.1016/j.conbuildmat.2015.06.063)
Jakub Sandak, Anna Sandak, Mariapaola Riggio (2015) Multivariate analysis of multi-sensor data for assessment of timber structures: principles and applications. Construction and Building Materials (doi:10.1016/j.conbuildmat.2015.06.062)
Jakub Sandak, Anna Sandak, Claudio Cantini, Antonella Autino (2015) Differences in wood properties of Picea abies L. Karst. in relation to site of provenance and population genetics. Holzforshung (DOI: 10.1515/hf-2014-0061)
Mariapaola Riggio, Jakub Sandak, Steffen Franke (2015) Application of imaging techniques for detection of defects, damage and decay in timber structures on-site. Construction and Building Materials doi:10.1016/j.conbuildmat.2015.06.065
Gianni Picchi, Martin Kuhmaier, Juan de Dios Diaz Marques (2015). Survival Test of RFID UHF Tags in Timber Harvesting Operations. Croatian Journal of Forest Engineering. 36-2, pp 165-174 (available at: http://www.crojfe.com/articles-915#923)
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
6) Detailed Report of Conferences /Articles 2015 (Last 6 months):GRAPHITEC ARTICLES
WebGL virtual globe for efficient forest production planning in mountainous area F. Prandi, G. Panizzoni, D. Magliocchetti, F. Devigili, R. de Amicis. 20th International Conference on 3D Web Technology (Web 3D 2015). Heraklion, Crete, Greece. June 2015.
"GIS tools for forest production optimization in mountainous areas:theSLOPE project D. Magliocchetti, G. Panizzoni, F. Prandi, R. De Amicis.15th International Multidisciplinary Scientific Geoconference(SGEM 2015). Albena, Bulgaria, June 2015.
"GeoPeeling Lens: Deformation - Based Technique for Exploratory Data Analysis Debiasi,A., Simoes,B., De Amicis,R. International Conferences in Central Europe on Computer Graphics, Visualization and Computer Vision (WSCG) 2015. Pilsen, 19-25 June 2015.
"SLOPE: A 3D forest virtual system to support harvesting operation in mountain areas". FORMEC 2015. Linz, Austria, 4-8 October 2015. D.Magliocchetti, F. Prandi, G. Panizzoni, D. Lotto and R. De Amicis.
(Under review) "Wide scale interactive 3D forest models at the service of forest production in mountain areas" Federico Prandi, Giulio Panizzoni, Daniele Magliocchetti, Federico Devigili, Raffaele De Amicis.
GMOD: Creation, processing, animation, visualization, and dissemination of GRAPHICAL MODELS Journal. http://www.journals.elsevier.com/graphical-models
TREEMETRICS: Conference
ForestTECH 2015. New Zealand. 19 November 2015. "Real Time Working in the Forest".
BOKU:
Picchi, G; Khmaier, M; Marques, JDD (2015): Survival Test of RFID UHF Tags in Timber Harvesting Operations. CROAT J FOR ENG. 2015; 36(2): 165-174. http://www.crojfe.com/r/i/crojfe_36-2_15/picchi.pdf
Picchi, G; Khmaier, M; De Dios Daz Marqus, J (2015): Survival test of RFID UHF tags in timber harvesting operations. [48th FORMEC Symposium, Linz, AUSTRIA, OCT, 4-8, 2015]. In: Kanzian, C; Khmaier, M; Erber, G (Ed.), Forest Engineering: "Making a positive contribution". Abstracts and Proceedings of the 48th Symposium on Forest Mechanization.; ISBN: 978-3-900932-29-9. https://www.formec.org/images/proceedings/2015/A4_4_Picchi_2015_58.pdf
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
6) Detailed Report of Conferences /Articles 2015 (Last 6 months):
BOKU:
Picchi, G; Khmaier, M; De Dios Daz Marqus, J (2015): Evaluation of RFID UHF tags for electronic marking of standing trees. [48th FORMEC Symposium, Linz, AUSTRIA, OCT, 4-8, 2015] In: Kanzian, C; Khmaier, M; Erber G (Ed.), Forest Engineering: "Making a positive contribution". Abstracts and Proceedings of the 48th Symposium on Forest Mechanization; ISBN: 978-3-900932-29-9 https://www.formec.org/images/proceedings/2015/A4_3_Picchi_2015_57.pdf
D. Magliocchetti, F. Prandi, G. Panizzoni, D. Lotto, R. De Amicis (2015): SLOPE, a 3D forest virtual system to support harvesting operations in mountain areas. [48th FORMEC Symposium, Linz, AUSTRIA, OCT, 4-8, 2015] In: Kanzian, C; Khmaier, M; Erber G (Ed.), Forest Engineering: "Making a positive contribution". Abstracts and Proceedings of the 48th Symposium on Forest Mechanization; ISBN: 978-3-900932-29-9https://www.formec.org/images/proceedings/2015/A4_6_Magliochetti_2015_206.pdf
S. Huurinainen (2015): Real-time managing of timber and biomass procurement, harvesting and supply based on multiple end-users demands in mountain forests. [48th FORMEC Symposium, Linz, AUSTRIA, OCT, 4-8, 2015] In: Kanzian, C; Khmaier, M; Erber G (Ed.), Forest Engineering: "Making a positive contribution". Abstracts and Proceedings of the 48th Symposium on Forest Mechanization; ISBN: 978-3-900932-29-9
https://www.formec.org/images/proceedings/2015/B5_4_Huurinainen_2015_88.pdf
Kanzian, C; Khmaier, M; Erber, G (2015): Forest Engineering: "Making a positive contribution". Abstracts and Proceedings of the 48th Symposium on Forest Mechanization. Linz, Austria. ISBN: 978-3-900932-29-9
https://www.formec.org/images/proceedings/2015/formec_proceedings_2015_web.pdf
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
6) EVENTS
Poster presentations (Last 6 months)
"The SLOPE project, use of GEOSS for precision forestry management on mountain areas" 9th GEO European Projects Workshop. 15-16 June 2015 Copenhagen, Denmark.
"Interactive Virtual Planning Tools for Sustainable Forest Production in Mountain Areas"G. Panizzoni, D. Magliocchetti, F. Prandi, R. De Amicis.Human Computer Interaction International (HCII 2015). Los Angeles, USA, August 2015.
"SLOPE PROJECT: integrated processing and control systems for sustainable production in farms and forests." European Data Forum 2015, Luxembourg, 16-17 November 2015.
http://seom.esa.int/S2forScience2014/index.php
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
2nd Press completed.
Translated into:Spanish. German. Italian.
NEXT UPDATES: April 2016December 2016
7) PRESS RELEASES
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
Some publications:
Forest Bioenergy: http://www.forestbioenergyreview.com/h-h/item/218-mhg-systems-develops-a-forest-information-systems-for-slope
Forest 2015 Blog: https://forests2015.wordpress.com/2015/07/06/slope-project-intelligent-forest-management/
Geomedia: https://www.google.es/url?sa=t&rct=j&q=&esrc=s&source=web&cd=60&ved=0ahUKEwi57srjyIPKAhUD2hoKHZnECls4MhAWCGAwCQ&url=http%3A%2F%2Fmediageo.it%2Fojs%2Findex.php%2FGEOmedia%2Farticle%2FviewFile%2F1118%2F1033&usg=AFQjCNGl6cji_aT4OcVHTatdMZUSlUkUcQ&sig2=eFEyEx1DmQVWNDwcvwSoPg&bvm=bv.110151844,d.ZWU&cad=rja
7) PRESS RELEASES
http://www.forestbioenergyreview.com/h-h/item/218-mhg-systems-develops-a-forest-information-systems-for-slopehttps://forests2015.wordpress.com/2015/07/06/slope-project-intelligent-forest-management/https://www.google.es/url?sa=t&rct=j&q=&esrc=s&source=web&cd=60&ved=0ahUKEwi57srjyIPKAhUD2hoKHZnECls4MhAWCGAwCQ&url=http://mediageo.it/ojs/index.php/GEOmedia/article/viewFile/1118/1033&usg=AFQjCNGl6cji_aT4OcVHTatdMZUSlUkUcQ&sig2=eFEyEx1DmQVWNDwcvwSoPg&bvm=bv.110151844,d.ZWU&cad=rja
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
Please, tell us updates or advances during 2015 in relations with projects included in Dissemination Plan and Responsible Partners (Page 34-37):
7) COOPERATION / OTHER PROJECTS
FP7 KBBE Innovative and effective technology and logistics for forest residual biomass supply in the EU (www.infres.eu)
FP7 KBBE Advanced multifunctional forest management in European mountain ranges (http://www.arange-project.eu)
FP7 INFRA-2011-1.1.13 Designing Trees for the future (http://www.trees4future.eu/)FP7 STREP i-Tour intelligent Transport system for Optimized URban trips (as tech. manager)ICT-PSP BRISEIDE BRIdging SErvices, Information and Data for Europe,(www.briseide.eu)ICT-PSP i-SCOPE interoperable Smart City services through an Open Platform for urban Ecosystems, (www.iscopeproject.net).
ICT-PSP SUNSHINE Smart Urban services for Higher energy efficiencyNATO Science for Peace GEPSUS Geographical Information Processing for Environmental Pollutionrelated Security within Urban Scale environments.BISYPLAN - The Bioenergy System Planners Handbook, part of the -BIOENAREA/INTEREGBiQUEEN Quality Biomass for Efficient Energy production;
NNE5-2000-0395 Forest Energy A solution for the Future Power Needs;LdV WESST Wood Energy Supply System Training;
QLRT-2000-0645 Storm damaged forests: efficient and safe harvesting and log conservation methods;QLRT 99 0991 Development of a protocol for ecoefficient wood harvesting on sensitive sites";
AIR2-CT94-1102 "Harvesting, drying and storage of energy biomass from SRF;
AIR2-CT94-0905 Improvement of coppice forests in the Mediterranean region
LIFE94/F/A151/EU/00713 "Mountain forests: techniques for long-term multi-functional management";Gatto delle funi (tracked automotive carriage) in collaboration with UNACOMA
Freeman 1800 (programmable forestry winch), computer-controlled machine with drive and motor PID controlling deviceHT 30 (carriage with cable ejection system) in collaboration with Autonomous Province of Trento
LEW (electronic winch) for the management of take-off ramps on ski jumping hills
TG 860 (carriage cableway) first load-identification machine with transport autonomous managementTECNO totally autonomous remote-controlled self-propelled motor carriageFlexwood (EU FP7)
IRIS ( ERA-NET)
BESTFACT: Best Practice Factory for Freight Transport,
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
8) Workshops
Four technical workshops are planned as far as results are available for dissemination
BOKU is responsible for Selecting potential stakeholders Making invitations Setting up the program Communication Secretariat and logistics
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
Workshop 1
Workshop on Hyperspectral Imaging at BOKU-UFT 20/03/2015
A workshop on Hyperspectral Imaging was organized on 20 March 2015 at the University of Natural Resources and Life Sciences in Vienna (Austria). The workshop was very successful; it hosted 58 participants from 11 countries and was a real international, transdisciplinary and interdepartmental scientific event.
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
Workshop 2
FORMEC TECHNICAL WORKSHOP 8-14/10/2105 - Linz, Austria
The SLOPE Technical Workshop was held within the FORMEC Symposium in Linz, Austria at the beginning of October 2015. FORMEC aimed to gather worldwide scientists, researchers and practitioners in forest operations and planning to encourage cooperation, and exchange of knowledge and information in forestry profession and science.
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
Workshop 2
FORMEC Scientific Symposium
8-14/10/2105
Linz, Austria
Scientific presentations during the first two days
Field trip to AUSTROFOMA forest machinery fair
300 researchers from all around the world are expected
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
Workshop 3
have to be defined
Possibility: 9-12 June on kwf-tagung fair Greifenberg is exhibitor Room has been offered http://www.kwf-tagung.org/ in Roding (Oberpfalz, Bayern)
http://www.kwf-tagung.org/
Cork. January 2016
Tasks and ResultsT.8.1 Dissemination planning and publications results.
Workshop 4
to be defined
EIMA 2016?
Together with sister project?
Together with final conference?
Cork. January 2016
WP 8 PRESENTATION
Thanks for your attention! Questions& updates can be sent to:
Antonio [email protected]
Juan de Dios, ITENE
Cork. January 2016
Project SLOPE
Technical M ti
T.8.2 Exploitation, business planning and IPR & licensing policies
Cork, January 20th, 2016
Huurinainen Seppo,MHG Systems Oy
Cork. January 2016
Overview
Technical M ti
Status: 10% Length: 36 Months (From M1 to M36) Involved Partners
Leader: MHG Participants: COMPOLAB, COAST, FLY, GRAPHITECH, CNR,
TRE, ITENE
Cork. January 2016
AIM
Technical M ti
Identification of the business scenarios, identifying the target market, competition and internal competencies. Creation of the appropriate SLOPE business model, where the corresponding market segments will be estimated according to the best practice models of market forecast. This model will be the basis for a 5-year business including the required investments and the estimated Return on Investment (ROI). Production of a business plan that will also include a strategy, financial analysis with
meticulous risk analysis. Risk analysis will be performed to detect any potential weakness and identify
adequate solutions. Development of a detailed exploitation strategy by each partner, detailing how they
intend to exploit the knowledge from this project. Each of the individual exploitation plans will be integrated into the overall exploitation
plan (ITENE) Development of required material for hooking up investors
Cork. January 2016
Pitch Value Proposition
Technical M ti
Goals of partnering enterprises and organizations Elements of a strong value proposition and how to build up it Business Model Canvas as a tool Sales pitch Sales presentation Active collaboration with Industrial Advisory Board members
Of course cost structure per activity/service needed in parallel first (WP 4)
Cork. January 2016
Sales Channel and Targeted Customers
Technical M ti
Elements for targeted customers and successful international saleschannels
Analysis of present sales channels/networks and needs for improvement
Ensuring the first deals Marketing plan with goals Managing of (sales) partner network
Cork. January 2016
Contact info
Seppo Huurinainen
Thank you for your attention.
Technical M ti
mailto:[email protected]
Cork. January 2016
Project SLOPE
T 8.3 Contribution to Standardization
Cork, January 20th, 2016
Gianni Picchi, Raffaele Spinelli, Michela Nocetti, Stefano BertiCNR-IVALSA
Technical
Cork. January 2016
Overview
Status: ongoing Length: until month 36 Involved Partners
Leader: CNR Participants: ITENE Aim: Propose updated or new standards in sustainable forest
production based on the results of the SLOPE project. Outputs: contacts with Technical Committees
Technical
Cork. January 2016Technical
Internet pages
Projects web page Section news Dedicated section (Overview, Work Packages, Deliverables,
Contribution to Standardization) Partners web site
CNR-IVALSA will upload a minisite and the section news with specific info addressing contributions to standardization(link to slopeproject.eu for more detail)
Other partners could help increasing the critical mass uploading short communications, e.g. BOKU with the sameinfo as CNR.
Cork. January 2016
Interactive communication
Social networks All partners, please provide to CNR and ITENE info and
highlights regarding the specific outcomes relevant for standardization
Direct contact with TC Partners already active in relevant TCs, please provide short
updates of the possible activities related to SLOPE (e.g. CNR-IVALSA active in CEN/TC 175);
All partners, please briefly report present standards in your field of expertise where SLOPE could contribute with an update beyond the state of art (e.g. CEN/ENV 1927-1 for P. abies logs classification)
Technical
Cork. January 2016
Standardization TC
Technical
Main Technical Committees previously identified:
CEN/TC 144 Tractors and machinery for agriculture and forestry (AFNOR)CEN/TC 142 Woodworking machines SafetyCEN/TC 147 Cranes SafetyCEN/TC 175 Round and sawn timberCEN/TC 225 AIDC (Automatic Identification and Data Capture) technologiesCEN/TC 278 Road transport and traffic telematicsCEN/TC 287 Geographic InformationCEN/TC 400 Horizontal standards in the fields of sludge, biowaste and soil (DIN)
OGC Open Geospatial Consortium (GT)StanForD 2010 (Skogforsk MHG, TRE, CNR)
More?
Cork. January 2016Technical
THANK YOU!
Standards for a safer work
Cork. January 2016
Project SLOPE
WP5 T8.4 Industrial Advisory Board
Huurinainen Seppo, MHG Systems Oy
Cork, January 20th, 2016
Technical Meeting20/Jan/16
Cork. January 2016
Overview
Status: Ongoing (95%) Length: 9 Months (From M1 to M25) Involved Partners
Leader: MHG Participants: Combolab, COAST, BOKU, FLY, TRE,
CNR
Aim: Set up an advisory board in order to follow all project activities
Output: D8.04, Presenting Industrial Advisory
Technical Meeting20/Jan/16
Cork. January 2016
Task 8.4 - Objective
The main objective of this task is to involve industrial members from the forestry, agricultural and related logistics and machinery industry. The main activities of the advisory board will be interchange opinions and knowledge by means of meetings and discussions. This information will be used as inputs for the execution of the tasks defined in SLOPE project, and redefine them when needed. Advising Business model development
Budget: 25 k; covering travelling expenses 3-5 members: one from Metsteho, Finland, one more suggested by Boku and CNR each Profiles TBD
Technical Meeting20/Jan/16
Cork. January 2016
Task 8.4 Canditates available
Academia: 1 canditate Associate Prof. Rien J.M. VISSER, New Zealand
Director of Studies, Forest Engineering, School of Forestry, Canterbury University
Harvest system planning, productivity and efficiency, including modeling and benchmarking
Cable logging and helicopter logging systems and training Minimizing environmental impacts of logging operations, codes of
practice Woody biomass harvesting and transport logistics for bio-energy Forest engineering, e.g. infrastructure design, construction and
maintenance Improving value recovery in harvesting operations Ergonomics, safety and training, including outreach activities such
as workshops International collaboration for low impact harvesting projects
Technical Meeting20/Jan/16
Cork. January 2016
Task 8.4 Canditates available
Big forest owners: 1 canditate Erwin Stampfer, CEO, Austrian State Forest Graduated in BOKU 1995, where worked for 2 years 15+ years at the Forestry Technology Unit inside the Bf AG offering harvesting, road construction and maintenance services to the own 12 forest management units and for private land owners (harvesting up to 1 Million m per year, 250 contractors Since July 1st 2013 working at the Austrian State Forests (Bf AG) being a head of the department "Flachgau-Tennengau" and responsible for an area of 61,500 ha which produces annually 130,000 m timber and revenues of 13-24 Mio Euro. He is responsible for 51 employees. The demonstration activities in Austria will also take place in Flachgau-Tennengau.
Technical Meeting20/Jan/16
Cork. January 2016
Task 8.4 Canditates available
Forest Industry R&D: 1 canditateMr. Jarmo Hmlinen, Research Manager, M.Sc. (For)Over 30 years of experince in development of wood supply logistics of forest industry, wood production methods and information management. Main expert fields, wood harvesting, forest resource management and mechanisation of silviculture.Main responsibilities:Analysing R&D needs and new development possibilities concerning wood supply. Constructing and leading research programmes and projects together with forest industry companies, research organisations, forest machine manufacturers and other actors of forestryMain focus in last years has been in digitalisation of wood procurement chain through effective utilization of Big Data and principles of industrial internet. In that context he is leading a wide national Forest Big Data project, where all the most important forestry actors in Finland are involved. Main target of the project is to produce basis for next generation forest management system, in which new methdos for forest data acquisition from different sources, data fusion, analysing and utilization have been developed. He has also taken part in planning and execution of several international R&D-project in Nordic countries and EU level.
Metsteho Oy Finland; http://www.metsateho.fi/briefly-in-english/ http://www.metsateho.fi/wp-content/uploads/Tehokas-puuhuolto_2025_EN_Efficient_Wood_Supply.pdf Development goal 2025 Wood supply to produce added value to the value chain while being 30% more cost efficient than today
Technical Meeting20/Jan/16
http://www.metsateho.fi/briefly-in-english/http://www.metsateho.fi/wp-content/uploads/Tehokas-puuhuolto_2025_EN_Efficient_Wood_Supply.pdf
Cork. January 2016
Task 8.4 Canditates available
Internationally operating SMSs: 2 canditates; Mr. Jarmo Ylinen, Porinilog, Finland 1994-2005 as Manager of Business Intelligence Group, the Metsliitto Concern, today renamed as Mets Group. Mr. Ylinen carried out feasibility studies for the groups mechanical forest industries division (Finnforest), pulp&paper mills division and the Group Headquarters in Finland, Sweden, Norway, Russia, Estonia, Uruguay, Guyana, Trinidad & Tobago, PR China, The Philippines, Malaysia and Indonesia, Sweden and the Baltic countries. Accumulated experience in organizational development by setting up and running a wood procurement organization for a blockboard company of Metsliitto Groups Finnforest mill in Romania Developing international forest service and wood pricing models Solid competence in wood procurement logistics, harvesting and transport planning and applications; development and marketing of harvesting and transport machine technology and systems Top expert in forest inventories, harvesting, logistics Ongoing consultancy assignments cover e.g. Japan mountain forest harvesting and logistics development (cooperative)
Technical Meeting20/Jan/16
Cork. January 2016
Task 8.4 Canditates available
Internationally operating SMSs: Mr. Paul Dima, Director, PROFOREST, Romania Logging operations based on the use of Wyssen cable cranes; using the cable installation in difficult terrain in Romanian forest, training future operators of cable installations for companies interested to invest in modern harvesting equipment, responsible for marketing, sales, maintenance and service to logging companies Consultancy in forestry for clients focused on Romania and Balkan region Independent consultant in matters regarding the modernization of the Romanian forest sector, such as: efficient utilization of resources, utilization of modern environmentally friendly equipment, training and transfer of know-how, socio-economic analysis, strategy development. Wide international experience
Technical Meeting20/Jan/16
Cork. January 2016
Task 8.4 Canditates asked not replied
Technical Meeting20/Jan/16
Serbia; Srbijaume Belgrade Mr Aleksandar Vasiljevic. Executive Director for development and strategic planning
in SE "Srbijaume". He is the Member of Association of Forest Engineers in Serbia, NGO Initiative for sustainable forestry. He has 25 years of professional experience in forest management, forestry inventory and planning, forest information systems, monitoring and evaluation, forest administration. He is also technical experienced in forest information systems, forest inventory, forest management planning and forest biomass. His project management experience comprises coordination of technical and financial cooperation programmes/projects, feasibility studies, policy/sector studies and evaluations and he also has practical experience with participatory approaches towards sustainable forest management. Full understanding of multi-stakeholder forest policy and strategy formulation processes (e.g. NFP). Extensively involved in institutional change and capacity building projects. Mr Vasiljevic, as the Director of Forestry Directorate, realized many international projects for development of forestry sector, national forest inventory, Strategy of forestry, Law of forest and Law of game animals protection and hunting, forest certification etc. He worked on many local and international projects in forestry sector for harmonization of legislation with EU
Cork. January 2016
Coverage
North America and South America missing USA&Canada is a huge market with potential investors However North America is always a difficult market to penetrate
without a good strategic partner
Technical Meeting20/Jan/16
Cork. January 2016
Nomination
All proposed business-oriented candidates were nominated with one voice as advisors of SLOPE Industrial Advisory Board?
Technical Meeting20/Jan/16
Cork. January 2016
Contact info
Seppo Huurinainen
Thank you for your attention.
Technical Meeting20/Jan/16
mailto:[email protected]
Project SLOPESlide Number 2WP8Tasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsTasks and ResultsWP 8 PRESENTATIONProject SLOPEOverviewAIMPitch Value PropositionSales Channel and Targeted CustomersContact infoProject SLOPEOverviewInternet pages Interactive communicationStandardization TCStandards for a safer workProject SLOPEOverviewTask 8.4 - ObjectiveTask 8.4 Canditates availableTask 8.4 Canditates availableTask 8.4 Canditates availableTask 8.4 Canditates availableTask 8.4 Canditates availableTask 8.4 Canditates asked not repliedCoverage NominationContact info