YOUI HEADQUARTERS

SI PPY DOWNS, AUST RALI A

CL IENT - YOUI

JOB NO - 4968

LEVEL G - PARTITION TYPES

I SSUE: C | 16 MARCH 2016 | FOR PRICING PURPOSES

B risbane

T 61 7 3846 7422W cotteeparker.com.auCottee Parker Architects Pty LtdABN 77 010 924 106

COPYRIGHT COTTEE PARKER ARCHITE CTS P TY. LTD

N

SCALE 1:400 @A3

0 4 8 12 16 20

PARTITION TYPE 14 : OPERABLE WALLSpacial Cocept 100S50 RX2: 100 Series, Acoustic: Rw50. Finish: Panel faces with selected echo

panels sit within a standard frame. Panels sealed acoustically to the track by sweep seals at the top and retractable seals at bottom. Frame: Powder coat in black. Track: Powder coat in White

to match with flush set plasterboards ceiling. Panels: Echo panel used as pinboards. Stack system:

Remote stack

PARTITION TYPE 15 : STACKING SLIDING GLASS DOORSCentor A14 top fixed head track to be concealed within ceiling area, aluminium frame with glass

infill sliding glass doors, completed with universal guide, track stops and accessories, stackable to wall cavity area. Allow structural supports within ceiling area for stacking sliding glass doors.

PARTITION TYPES LEGENDPartition Acoustic:

Type 1: 50mm Bradford Glasswood partition batts (11kg/m3) between Type 2: 75mm Bradford Glasswood partition batts (11kg/m3) between studs

Ceiling Acoustic :

Type A: 1 layers of 4kg/m2 Wavebar acoustic membrance barriers fixed to underside of concrete s lab and attached to the top of parition to achieve

min. CAC 48 sound rating

PARTITION TYPE 1: NON ACOUSTICDescription: PB partition (Full height and part height)

Steel stud size: 76mm x 0.75mm BMT

Partition System: N/ALining: 1 x 13mm PB both sides

Height: 3200mm: FFL & u/s of concrete soffit ceiling

PARTITION TYPE 2: (GLAZING TO AS1288)Description: Lamintated glass in proprietary partition sys tem to 2700mm FFL,

plasterboard partition above to underside of concrete soffit

Partition System: Brisbane Aluminium Superme Range 76mm steel stud Finish: Black powdercoat

Steel Stud size: framing to suit above glazed paritionLinings: nom. 12mm glass , & 1 x 13mm Soundchek PB both sides

Acoustic: Type 2

Sound rating : Partition- Rw35 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 3:Description: Steel stud partition from floor to under side of metal works ceiling

Partition System: CSR032Finish: N/A

Steel Stud size: 76mm x 0.75 BMT

Linings: 1 x 13mm Soundchek PB both sidesHeight: 3200mm above FFL

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- Type A

PARTITION TYPE 4 : Description: Steel stud partition from floor to u/s concrete soffit

Partition System: CSR032Finish: N/A

Steel Stud size: 76mm x 0.75 BMT

Linings: 1 x 13mm Soundchek PB both sidesHeight: Gnd Level: 4650mm , Levels 1-3 : 3850mm

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 5 :

Description: Full height steel stud partition from floor to u/s concrete soffit

Partition System: CSR606Finish: N/A

Steel Stud size: 76mm x 0.75 MTLinings: 1 x 13mm Soundchek PB & 1 x 9mm Cemintell wallboard

Height: Ground: 4650mm above FFL, Level 1-3 : 3850mm

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- u/s o fConcrete

PARTITION TYPE 6 : FIRE RATED

Description: Full height steel stud partition- Fire rated

Partition System: CSR977 Finish: N/A

Steel Stud size: 102 C-H steel s tudLinings: 2 x 13mm Fyrchek PB, 1 x 25mm shaft wall lining

Height: Full height

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 7 :

Description: Applied liningPartition System: N/A

Finish: N/A

Steel Stud size: 28 furring channels on BETA- Fix clipsLinings: 1 x 13mm PB

Height: 2400mm above FFL Acoustic / Sound rating: N/A (u/s of concrete)

PARTITION TYPES LEGENDAdditional Support:

Type 1: 240 x40 timber noggings with proprietary stud fixing brackets for wall mounted fittings and fixtures

Type 2: Provide 12mm thick MR ply infill between studs where required to provide additional support for toilet partitions. Allow structural supports within ceiling area for

suspended toilet partitions

PARTITION TYPE 8 : EXTERNAL

Description: Steel stud partition from floor to nominated heightPartition System: N/A

Finish: N/ASteel Stud size: 76mm x 0.75 BMT

Linings: 1 x 9mm Cemintell wallboard both sides

Height: 2700mm above FFLAcoustic: N/A

Sound rating: Partition- N/A , Ceiling- N/A

PARTITION TYPE 9 : WET AREASDescription: Steel stud partition from floor to under side of flush set PB ceiling

Partition System: CSR601

Finish: N/ASteel Stud size: 76mm x 0.75 BMT

Linings: 1 x 13mm Cemintel wall board both sidesHeight: 2400mm above FFL

Acoustic: Type 1

Sound rating: Partition- Rw45 , Ceiling- Type AAdditional Support: Type 1

PARTITION TYPE 10 : CORRIDOR

Description: Steel stud partition from floor to under side of flush set PB ceiling

Partition System: N/AFinish: N/A

Steel Stud size: 76mm x 0.75 BMTLinings: 1 x 9mm Cemintel wall board to amenity side & 1 x 13mm soundchek PB to

corridor side. Amenities air lock, corridor side to have 12 VJ, T&G wall board painted finished

Height: 2400mm above FFL

Acoustic: Type 1Sound rating: Partition- Rw40 , Ceiling- N/A (u/s of concrete)

Additional Support: Type 1

PARTITION TYPE 11 : WET AREAS / Staff Lunchroom

Description: Applied liningPartition System: N/A

Finish: N/ASteel Stud size: 28 furring channel on BETA- fix c lips

Linings: 1 x 9mm Cemintel wall board

Height: 2400mm above FFLAcoustic: N/A

Sound rating: N/A ( adj. to concrete)Additional Support: to suit

PARTITION TYPE 12 : FIRE RATEDDescription: Steel stud partition from floor to under side of conc. soffit

Partition System: CSR075Finish: N/A

Steel Stud size: 76mm

Linings: 2 x 13mm Fychek PB both sidesHeight: 3850mm above FFL

Acoustic: N/ASound rating: Partition- Rw45 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 13 : HIGH LEVEL ACOUSTIC

Description: Steel stud partition from floor to under side of conc. soffit

Partition System: CSR033Steel Stud size: 76mm

Linings: 1 x 13mm Soundchek PB & 2 x 13mm Soundchek PB on the other sideHeight: Ground Level : 4650mm, Levels 1-3 : 3850mm

Acoustic: Type 2

Sound rating: Partition- Rw50 , Ceiling- N/A (u/s of concrete)

YOUI HEADQUARTERS

SI PPY DOWNS, AUST RALI A

CL IENT - YOUI

JOB NO - 4968

LEVEL 1 & 2 - PARTITION TYPES

I SSUE: C | 16 MARCH 2016 | FOR PRICING PURPOSES

B risbane

T 61 7 3846 7422W cotteeparker.com.auCottee Parker Architects Pty LtdABN 77 010 924 106

COPYRIGHT COTTEE PARKER ARCHITE CTS P TY. LTD

N

SCALE 1:400 @A3

0 4 8 12 16 20

PARTITION TYPE 14 : OPERABLE WALLSpacial Cocept 100S50 RX2: 100 Series, Acoustic: Rw50. Finish: Panel faces with selected echo

panels sit within a standard frame. Panels sealed acoustically to the track by sweep seals at the top and retractable seals at bottom. Frame: Powder coat in black Track: Powder coat in White to

match with flush set plasterboards ceiling. Panels: Echo panel used as pinboards. Stack system:

Remote stack

PARTITION TYPE 15 : STACKING SLIDING GLASS DOORSCentor A14 top fixed head track to be concealed within ceiling area, aluminium frame with glass

infill sliding glass doors, completed with universal guide, track stops and accessories, stackable to wall cavity area. Allow structural supports within ceiling area for stacking sliding glass doors.

PARTITION TYPES LEGENDPartition Acoustic:

Type 1: 50mm Bradford Glasswood partition batts (11kg/m3) between Type 2: 75mm Bradford Glasswood partition batts (11kg/m3) between studs

Ceiling Acoustic :

Type A: 1 layers of 4kg/m2 Wavebar acoustic membrance barriers fixed to underside of concrete s lab and attached to the top of parition to achieve

min. CAC 48 sound rating

PARTITION TYPE 1: NON ACOUSTICDescription: PB partition (Full height and part height)

Steel stud size: 76mm x 0.75mm BMT

Partition System: N/ALining: 1 x 13mm PB both sides

Height: 3200mm: FFL & u/s of concrete soffit ceiling

PARTITION TYPE 2: (GLAZING TO AS1288)Description: Lamintated glass in proprietary partition sys tem to 2700mm FFL,

plasterboard partition above to underside of concrete soffit

Partition System: Brisbane Aluminium Superme Range 76mm steel stud Finish: Black powdercoat

Steel Stud size: framing to suit above glazed paritionLinings: nom. 12mm glass , & 1 x 13mm Soundchek PB both sides

Acoustic: Type 2

Sound rating : Partition- Rw35 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 3:Description: Steel stud partition from floor to under side of metal works ceiling

Partition System: CSR032Finish: N/A

Steel Stud size: 76mm x 0.75 BMT

Linings: 1 x 13mm Soundchek PB both sidesHeight: 3200mm above FFL

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- Type A

PARTITION TYPE 4 : Description: Steel stud partition from floor to u/s concrete soffit

Partition System: CSR032Finish: N/A

Steel Stud size: 76mm x 0.75 BMT

Linings: 1 x 13mm Soundchek PB both sidesHeight: Gnd Level: 4650mm , Levels 1-3 : 3850mm

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 5 :

Description: Full height steel stud partition from floor to u/s concrete soffit

Partition System: CSR606Finish: N/A

Steel Stud size: 76mm x 0.75 MTLinings: 1 x 13mm Soundchek PB & 1 x 9mm Cemintell wallboard

Height: Ground: 4650mm above FFL, Level 1-3 : 3850mm

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- u/s o fConcrete

PARTITION TYPE 6 : FIRE RATED

Description: Full height steel stud partition- Fire rated

Partition System: CSR977 Finish: N/A

Steel Stud size: 102 C-H steel s tudLinings: 2 x 13mm Fyrchek PB, 1 x 25mm shaft wall lining

Height: Full height

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 7 :

Description: Applied liningPartition System: N/A

Finish: N/A

Steel Stud size: 28 furring channels on BETA- Fix clipsLinings: 1 x 13mm PB

Height: 2400mm above FFL Acoustic / Sound rating: N/A (u/s of concrete)

PARTITION TYPES LEGENDAdditional Support:

Type 1: 240 x40 timber noggings with proprietary stud fixing brackets for wall mounted fittings and fixtures

Type 2: Provide 12mm thick MR ply infill between studs where required to provide additional support for toilet partitions. Allow structural supports within ceiling area for

suspended toilet partitions

PARTITION TYPE 8 : EXTERNAL

Description: Steel stud partition from floor to nominated heightPartition System: N/A

Finish: N/ASteel Stud size: 76mm x 0.75 BMT

Linings: 1 x 9mm Cemintell wallboard both sides

Height: 2700mm above FFLAcoustic: N/A

Sound rating: Partition- N/A , Ceiling- N/A

PARTITION TYPE 9 : WET AREASDescription: Steel stud partition from floor to under side of flush set PB ceiling

Partition System: CSR601

Finish: N/ASteel Stud size: 76mm x 0.75 BMT

Linings: 1 x 13mm Cemintel wall board both sidesHeight: 2400mm above FFL

Acoustic: Type 1

Sound rating: Partition- Rw45 , Ceiling- Type AAdditional Support: Type 1

PARTITION TYPE 10 : CORRIDOR

Description: Steel stud partition from floor to under side of flush set PB ceiling

Partition System: N/AFinish: N/A

Steel Stud size: 76mm x 0.75 BMTLinings: 1 x 9mm Cemintel wall board to amenity side & 1 x 13mm soundchek PB to

corridor side. Amenities air lock, corridor side to have 12 VJ, T&G wall board painted finished

Height: 2400mm above FFL

Acoustic: Type 1Sound rating: Partition- Rw40 , Ceiling- N/A (u/s of concrete)

Additional Support: Type 1

PARTITION TYPE 11 : WET AREAS / Staff Lunchroom

Description: Applied liningPartition System: N/A

Finish: N/ASteel Stud size: 28 furring channel on BETA- fix c lips

Linings: 1 x 9mm Cemintel wall board

Height: 2400mm above FFLAcoustic: N/A

Sound rating: N/A ( adj. to concrete)Additional Support: to suit

PARTITION TYPE 12 : FIRE RATEDDescription: Steel stud partition from floor to under side of conc. soffit

Partition System: CSR075Finish: N/A

Steel Stud size: 76mm

Linings: 2 x 13mm Fychek PB both sidesHeight: 3850mm above FFL

Acoustic: N/ASound rating: Partition- Rw45 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 13 : HIGH LEVEL ACOUSTIC

Description: Steel stud partition from floor to under side of conc. soffit

Partition System: CSR033Steel Stud size: 76mm

Linings: 1 x 13mm Soundchek PB & 2 x 13mm Soundchek PB on the other sideHeight: Ground Level : 4650mm, Levels 1-3 : 3850mm

Acoustic: Type 2

Sound rating: Partition- Rw50 , Ceiling- N/A (u/s of concrete)

YOUI HEADQUARTERS

SI PPY DOWNS, AUST RALI A

CL IENT - YOUI

JOB NO - 4968

LEVEL 3 - PARTITION TYPES

I SSUE: C | 16 MARCH 2016 | FOR PRICING PURPOSES

B risbane

T 61 7 3846 7422W cotteeparker.com.auCottee Parker Architects Pty LtdABN 77 010 924 106

COPYRIGHT COTTEE PARKER ARCHITE CTS P TY. LTD

N

SCALE 1:400 @A3

0 4 8 12 16 20

PARTITION TYPE 14 : OPERABLE WALLSpacial Cocept 100S50 RX2: 100 Series, Acoustic: Rw50. Finish: Panel faces with selected echo

panels sit within a standard frame. Panels sealed acoustically to the track by sweep seals at the top and retractable seals at bottom. Frame: Powder coat in black . Track: Powder coat in White

to match with flush set plasterboards ceiling. Panels: Echo panel used as pinboards. Stack system:

Remote stack

PARTITION TYPE 15 : STACKING SLIDING GLASS DOORSCentor A14 top fixed head track to be concealed within ceiling area, aluminium frame with glass

infill sliding glass doors, completed with universal guide, track stops and accessories, stackable to wall cavity area. Allow structural supports within ceiling area for stacking sliding glass doors.

PARTITION TYPES LEGENDPartition Acoustic:

Type 1: 50mm Bradford Glasswood partition batts (11kg/m3) between Type 2: 75mm Bradford Glasswood partition batts (11kg/m3) between studs

Ceiling Acoustic :

Type A: 1 layers of 4kg/m2 Wavebar acoustic membrance barriers fixed to underside of concrete s lab and attached to the top of parition to achieve

min. CAC 48 sound rating

PARTITION TYPE 1: NON ACOUSTICDescription: PB partition (Full height and part height)

Steel stud size: 76mm x 0.75mm BMT

Partition System: N/ALining: 1 x 13mm PB both sides

Height: 3200mm: FFL & u/s of concrete soffit ceiling

PARTITION TYPE 2: (GLAZING TO AS1288)Description: Lamintated glass in proprietary partition sys tem to 2700mm FFL,

plasterboard partition above to underside of concrete soffit

Partition System: Brisbane Aluminium Superme Range 76mm steel stud Finish: Black powdercoat

Steel Stud size: framing to suit above glazed paritionLinings: nom. 12mm glass , & 1 x 13mm Soundchek PB both sides

Acoustic: Type 2

Sound rating : Partition- Rw35 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 3:Description: Steel stud partition from floor to under side of metal works ceiling

Partition System: CSR032Finish: N/A

Steel Stud size: 76mm x 0.75 BMT

Linings: 1 x 13mm Soundchek PB both sidesHeight: 3200mm above FFL

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- Type A

PARTITION TYPE 4 : Description: Steel stud partition from floor to u/s concrete soffit

Partition System: CSR032Finish: N/A

Steel Stud size: 76mm x 0.75 BMT

Linings: 1 x 13mm Soundchek PB both sidesHeight: Gnd Level: 4650mm , Levels 1-3 : 3850mm

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 5 :

Description: Full height steel stud partition from floor to u/s concrete soffit

Partition System: CSR606Finish: N/A

Steel Stud size: 76mm x 0.75 MTLinings: 1 x 13mm Soundchek PB & 1 x 9mm Cemintell wallboard

Height: Ground: 4650mm above FFL, Level 1-3 : 3850mm

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- u/s o fConcrete

PARTITION TYPE 6 : FIRE RATED

Description: Full height steel stud partition- Fire rated

Partition System: CSR977 Finish: N/A

Steel Stud size: 102 C-H steel s tudLinings: 2 x 13mm Fyrchek PB, 1 x 25mm shaft wall lining

Height: Full height

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 7 :

Description: Applied liningPartition System: N/A

Finish: N/A

Steel Stud size: 28 furring channels on BETA- Fix clipsLinings: 1 x 13mm PB

Height: 2400mm above FFL Acoustic / Sound rating: N/A (u/s of concrete)

PARTITION TYPES LEGENDAdditional Support:

Type 1: 240 x40 timber noggings with proprietary stud fixing brackets for wall mounted fittings and fixtures

Type 2: Provide 12mm thick MR ply infill between studs where required to provide additional support for toilet partitions. Allow structural supports within ceiling area for

suspended toilet partitions

PARTITION TYPE 8 : EXTERNAL

Description: Steel stud partition from floor to nominated heightPartition System: N/A

Finish: N/ASteel Stud size: 76mm x 0.75 BMT

Linings: 1 x 9mm Cemintell wallboard both sides

Height: 2700mm above FFLAcoustic: N/A

Sound rating: Partition- N/A , Ceiling- N/A

PARTITION TYPE 9 : WET AREASDescription: Steel stud partition from floor to under side of flush set PB ceiling

Partition System: CSR601

Finish: N/ASteel Stud size: 76mm x 0.75 BMT

Linings: 1 x 13mm Cemintel wall board both sidesHeight: 2400mm above FFL

Acoustic: Type 1

Sound rating: Partition- Rw45 , Ceiling- Type AAdditional Support: Type 1

PARTITION TYPE 10 : CORRIDOR

Description: Steel stud partition from floor to under side of flush set PB ceiling

Partition System: N/AFinish: N/A

Steel Stud size: 76mm x 0.75 BMTLinings: 1 x 9mm Cemintel wall board to amenity side & 1 x 13mm soundchek PB to

corridor side. Amenities air lock, corridor side to have 12 VJ, T&G wall board painted finished

Height: 2400mm above FFL

Acoustic: Type 1Sound rating: Partition- Rw40 , Ceiling- N/A (u/s of concrete)

Additional Support: Type 1

PARTITION TYPE 11 : WET AREAS / Staff Lunchroom

Description: Applied liningPartition System: N/A

Finish: N/ASteel Stud size: 28 furring channel on BETA- fix c lips

Linings: 1 x 9mm Cemintel wall board

Height: 2400mm above FFLAcoustic: N/A

Sound rating: N/A ( adj. to concrete)Additional Support: to suit

PARTITION TYPE 12 : FIRE RATEDDescription: Steel stud partition from floor to under side of conc. soffit

Partition System: CSR075Finish: N/A

Steel Stud size: 76mm

Linings: 2 x 13mm Fychek PB both sidesHeight: 3850mm above FFL

Acoustic: N/ASound rating: Partition- Rw45 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 13 : HIGH LEVEL ACOUSTIC

Description: Steel stud partition from floor to under side of conc. soffit

Partition System: CSR033Steel Stud size: 76mm

Linings: 1 x 13mm Soundchek PB & 2 x 13mm Soundchek PB on the other sideHeight: Ground Level : 4650mm, Levels 1-3 : 3850mm

Acoustic: Type 2

Sound rating: Partition- Rw50 , Ceiling- N/A (u/s of concrete)

YOUI HEADQUARTERS

SI PPY DOWNS, AUST RALI A

CL IENT - YOUI

JOB NO - 4968

LEVEL 4 - PARTITION TYPES

I SSUE: C | 16 MARCH 2016 | FOR PRICING PURPOSES

B risbane

T 61 7 3846 7422W cotteeparker.com.auCottee Parker Architects Pty LtdABN 77 010 924 106

COPYRIGHT COTTEE PARKER ARCHITE CTS P TY. LTD

N

SCALE 1:400 @A3

0 4 8 12 16 20

PARTITION TYPE 14 : OPERABLE WALLSpacial Cocept 100S50 RX2: 100 Series, Acoustic: Rw50. Finish: Panel faces with selected echo

panels sit within a standard frame. Panels sealed acoustically to the track by sweep seals at the top and retractable seals at bottom. Frame: Powder coat in black Track: Powder coat in White to

match with flush set plasterboards ceiling. Panels: Echo panel used as pinboards. Stack system:

Remote stack

PARTITION TYPE 15 : STACKING SLIDING GLASS DOORSCentor A14 top fixed head track to be concealed within ceiling area, aluminium frame with glass

infill sliding glass doors, completed with universal guide, track stops and accessories, stackable to wall cavity area. Allow structural supports within ceiling area for stacking sliding glass doors.

PARTITION TYPES LEGENDPartition Acoustic:

Type 1: 50mm Bradford Glasswood partition batts (11kg/m3) between Type 2: 75mm Bradford Glasswood partition batts (11kg/m3) between studs

Ceiling Acoustic :

Type A: 1 layers of 4kg/m2 Wavebar acoustic membrance barriers fixed to underside of concrete s lab and attached to the top of parition to achieve

min. CAC 48 sound rating

PARTITION TYPE 1: NON ACOUSTICDescription: PB partition (Full height and part height)

Steel stud size: 76mm x 0.75mm BMT

Partition System: N/ALining: 1 x 13mm PB both sides

Height: 3200mm: FFL & u/s of concrete soffit ceiling

PARTITION TYPE 2: (GLAZING TO AS1288)Description: Lamintated glass in proprietary partition sys tem to 2700mm FFL,

plasterboard partition above to underside of concrete soffit

Partition System: Brisbane Aluminium Superme Range 76mm steel stud Finish: Black powdercoat

Steel Stud size: framing to suit above glazed paritionLinings: nom. 12mm glass , & 1 x 13mm Soundchek PB both sides

Acoustic: Type 2

Sound rating : Partition- Rw35 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 3:Description: Steel stud partition from floor to under side of metal works ceiling

Partition System: CSR032Finish: N/A

Steel Stud size: 76mm x 0.75 BMT

Linings: 1 x 13mm Soundchek PB both sidesHeight: 3200mm above FFL

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- Type A

PARTITION TYPE 4 : Description: Steel stud partition from floor to u/s concrete soffit

Partition System: CSR032Finish: N/A

Steel Stud size: 76mm x 0.75 BMT

Linings: 1 x 13mm Soundchek PB both sidesHeight: Gnd Level: 4650mm , Levels 1-3 : 3850mm

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 5 :

Description: Full height steel stud partition from floor to u/s concrete soffit

Partition System: CSR606Finish: N/A

Steel Stud size: 76mm x 0.75 MTLinings: 1 x 13mm Soundchek PB & 1 x 9mm Cemintell wallboard

Height: Ground: 4650mm above FFL, Level 1-3 : 3850mm

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- u/s o fConcrete

PARTITION TYPE 6 : FIRE RATED

Description: Full height steel stud partition- Fire rated

Partition System: CSR977 Finish: N/A

Steel Stud size: 102 C-H steel s tudLinings: 2 x 13mm Fyrchek PB, 1 x 25mm shaft wall lining

Height: Full height

Acoustic: Type 2Sound rating: Partition- Rw45 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 7 :

Description: Applied liningPartition System: N/A

Finish: N/A

Steel Stud size: 28 furring channels on BETA- Fix clipsLinings: 1 x 13mm PB

Height: 2400mm above FFL Acoustic / Sound rating: N/A (u/s of concrete)

PARTITION TYPES LEGENDAdditional Support:

Type 1: 240 x40 timber noggings with proprietary stud fixing brackets for wall mounted fittings and fixtures

Type 2: Provide 12mm thick MR ply infill between studs where required to provide additional support for toilet partitions. Allow structural supports within ceiling area for

suspended toilet partitions

PARTITION TYPE 8 : EXTERNAL

Description: Steel stud partition from floor to nominated heightPartition System: N/A

Finish: N/ASteel Stud size: 76mm x 0.75 BMT

Linings: 1 x 9mm Cemintell wallboard both sides

Height: 2700mm above FFLAcoustic: N/A

Sound rating: Partition- N/A , Ceiling- N/A

PARTITION TYPE 9 : WET AREASDescription: Steel stud partition from floor to under side of flush set PB ceiling

Partition System: CSR601

Finish: N/ASteel Stud size: 76mm x 0.75 BMT

Linings: 1 x 13mm Cemintel wall board both sidesHeight: 2400mm above FFL

Acoustic: Type 1

Sound rating: Partition- Rw45 , Ceiling- Type AAdditional Support: Type 1

PARTITION TYPE 10 : CORRIDOR

Description: Steel stud partition from floor to under side of flush set PB ceiling

Partition System: N/AFinish: N/A

Steel Stud size: 76mm x 0.75 BMTLinings: 1 x 9mm Cemintel wall board to amenity side & 1 x 13mm soundchek PB to

corridor side. Amenities air lock, corridor side to have 12 VJ, T&G wall board painted finished

Height: 2400mm above FFL

Acoustic: Type 1Sound rating: Partition- Rw40 , Ceiling- N/A (u/s of concrete)

Additional Support: Type 1

PARTITION TYPE 11 : WET AREAS / Staff Lunchroom

Description: Applied liningPartition System: N/A

Finish: N/ASteel Stud size: 28 furring channel on BETA- fix c lips

Linings: 1 x 9mm Cemintel wall board

Height: 2400mm above FFLAcoustic: N/A

Sound rating: N/A ( adj. to concrete)Additional Support: to suit

PARTITION TYPE 12 : FIRE RATEDDescription: Steel stud partition from floor to under side of conc. soffit

Partition System: CSR075Finish: N/A

Steel Stud size: 76mm

Linings: 2 x 13mm Fychek PB both sidesHeight: 3850mm above FFL

Acoustic: N/ASound rating: Partition- Rw45 , Ceiling- N/A (u/s of concrete)

PARTITION TYPE 13 : HIGH LEVEL ACOUSTIC

Description: Steel stud partition from floor to under side of conc. soffit

Partition System: CSR033Steel Stud size: 76mm

Linings: 1 x 13mm Soundchek PB & 2 x 13mm Soundchek PB on the other sideHeight: Ground Level : 4650mm, Levels 1-3 : 3850mm

Acoustic: Type 2

Sound rating: Partition- Rw50 , Ceiling- N/A (u/s of concrete)

YOUI HEADQUARTERS

SI PPY DOWNS, AUST RALI A

CL IENT - YOUI

JOB NO - 4968

LEVEL G - WALL FINISHES PLAN

I SSUE: C | 16 MARCH 2016 | FOR PRICING PURPOSES

B risbane

T 61 7 3846 7422W cotteeparker.com.auCottee Parker Architects Pty LtdABN 77 010 924 106

COPYRIGHT COTTEE PARKER ARCHITE CTS P TY. LTD

N

SCALE 1:400 @A3

0 4 8 12 16 20

SKIRTING TYPES LEGEND

SKIRTING TYPE 1: GENERALLY TO ALL PLASTERBOARD WALLSBris Aluminium concealed fix 100mm high x 5mm AS100.

SKIRTING TYPE 2: GENERALLY TO ALL "VJ" WALLSRecessed Bris Aluminium glue fix 100mm high x 1.6mm.

SKIRTING TYPE 3: WET ARESCeramic Tile

WASHROOM PARTITION TYPES LEGEND

Kyissa K2 system or equalSupplier: Hufcor

URINAL PRIVACY PANELS:32mm Structural BoardCeiling Mounted200mm off ground

TOILET PARTITIONS:32mm Structural BoardCeiling mounted200mm off ground

SHOWER PARTITIONS:13mm Compact LaminateCeiling mounted200mm off ground

WALL FINISHES LEGEND

PAINTED PLASTERBOARD :All walls unless noted otherwise.

COLUMNS :All column to be off form sealed concrete unless shown encased in wall linings.

FEATURE WALL CLADDING :MDF sheets profiled with a "V" groove to resemble the "VJ" tongue and groove boards. Paint f inish

FULL HEIGHT GENERAL CERAMIC TILE :Glazed ceramic tiles$36.90/m2 supply

FULL HEIGHT FEATURE CERAMIC TILEGlazed ceramic tiles$60/m2 supply

SPLASHBACK TILE Glazed ceramic tiles$50/m2 supply

CLEANER'S ROOM CERAMIC TILE :Glazed ceramic tile full height$20/m2 supply

FIRE STAIR HANDRAILS:Powdercoated steel mesh to suport central handrail.Stainless steel handrails.

BLOCKWORKConcrete block natural finish. Sealed if required.

STAINLESS STEEL SPLASHBACKStainless steel brushed No4 f inish

ROOF FEATURE PANELLINGFC panels with expressed joins, pattern, various size panels, paint finish.

PAINT FINISH

FC LININGJames Hardie Groove Lining- Painted Finish

YOUI HEADQUARTERS

SI PPY DOWNS, AUST RALI A

CL IENT - YOUI

JOB NO - 4968

LEVEL 1 & 2 - WALL FINISHES PLAN

I SSUE: C | 16 MARCH 2016 | FOR PRICING PURPOSES

B risbane

T 61 7 3846 7422W cotteeparker.com.auCottee Parker Architects Pty LtdABN 77 010 924 106

COPYRIGHT COTTEE PARKER ARCHITE CTS P TY. LTD

N

SCALE 1:400 @A3

0 4 8 12 16 20

WALL FINISHES LEGEND

PAINTED PLASTERBOARD :All walls unless noted otherwise.

COLUMNS :All column to be off form sealed concrete unless shown encased in wall linings.

FEATURE WALL CLADDING :MDF sheets profiled with a "V" groove to resemble the "VJ" tongue and groove boards. Paint f inish

FULL HEIGHT GENERAL CERAMIC TILE :Glazed ceramic tiles$36.90/m2 supply

FULL HEIGHT FEATURE CERAMIC TILEGlazed ceramic tiles$60/m2 supply

SPLASHBACK TILE Glazed ceramic tiles$50/m2 supply

CLEANER'S ROOM CERAMIC TILE :Glazed ceramic tile full height$20/m2 supply

FIRE STAIR HANDRAILS:Powdercoated steel mesh to suport central handrail.Stainless steel handrails.

BLOCKWORKConcrete block natural finish. Sealed if required.

STAINLESS STEEL SPLASHBACKStainless steel brushed No4 f inish

ROOF FEATURE PANELLINGFC panels with expressed joins, pattern, various size panels, paint finish.

PAINT FINISH

FC LININGJames Hardie Groove Lining- Painted Finish

YOUI HEADQUARTERS

SI PPY DOWNS, AUST RALI A

CL IENT - YOUI

JOB NO - 4968

LEVEL 3 - WALL FINISHES PLAN

I SSUE: C | 16 MARCH 2016 | FOR PRICING PURPOSES

B risbane

T 61 7 3846 7422W cotteeparker.com.auCottee Parker Architects Pty LtdABN 77 010 924 106

COPYRIGHT COTTEE PARKER ARCHITE CTS P TY. LTD

N

SCALE 1:400 @A3

0 4 8 12 16 20

WALL FINISHES LEGEND

PAINTED PLASTERBOARD :All walls unless noted otherwise.

COLUMNS :All column to be off form sealed concrete unless shown encased in wall linings.

FEATURE WALL CLADDING :MDF sheets profiled with a "V" groove to resemble the "VJ" tongue and groove boards. Paint f inish

FULL HEIGHT GENERAL CERAMIC TILE :Glazed ceramic tiles$36.90/m2 supply

FULL HEIGHT FEATURE CERAMIC TILEGlazed ceramic tiles$60/m2 supply

SPLASHBACK TILE Glazed ceramic tiles$50/m2 supply

CLEANER'S ROOM CERAMIC TILE :Glazed ceramic tile full height$20/m2 supply

FIRE STAIR HANDRAILS:Powdercoated steel mesh to suport central handrail.Stainless steel handrails.

BLOCKWORKConcrete block natural finish. Sealed if required.

STAINLESS STEEL SPLASHBACKStainless steel brushed No4 f inish

ROOF FEATURE PANELLINGFC panels with expressed joins, pattern, various size panels, paint finish.

PAINT FINISH

FC LININGJames Hardie Groove Lining- Painted Finish

YOUI HEADQUARTERS

SI PPY DOWNS, AUST RALI A

CL IENT - YOUI

JOB NO - 4968

LEVEL 4 - WALL FINISHES PLAN

I SSUE: C | 16 MARCH 2016 | FOR PRICING PURPOSES

B risbane

T 61 7 3846 7422W cotteeparker.com.auCottee Parker Architects Pty LtdABN 77 010 924 106

COPYRIGHT COTTEE PARKER ARCHITE CTS P TY. LTD

N

SCALE 1:400 @A3

0 4 8 12 16 20

WALL FINISHES LEGEND

PAINTED PLASTERBOARD :All walls unless noted otherwise.

COLUMNS :All column to be off form sealed concrete unless shown encased in wall linings.

FEATURE WALL CLADDING :MDF sheets profiled with a "V" groove to resemble the "VJ" tongue and groove boards. Paint f inish

FULL HEIGHT GENERAL CERAMIC TILE :Glazed ceramic tiles$36.90/m2 supply

FULL HEIGHT FEATURE CERAMIC TILEGlazed ceramic tiles$60/m2 supply

SPLASHBACK TILE Glazed ceramic tiles$50/m2 supply

CLEANER'S ROOM CERAMIC TILE :Glazed ceramic tile full height$20/m2 supply

FIRE STAIR HANDRAILS:Powdercoated steel mesh to suport central handrail.Stainless steel handrails.

BLOCKWORKConcrete block natural finish. Sealed if required.

STAINLESS STEEL SPLASHBACKStainless steel brushed No4 f inish

ROOF FEATURE PANELLINGFC panels with expressed joins, pattern, various size panels, paint finish.

PAINT FINISH

FC LININGJames Hardie Groove Lining- Painted Finish

YOUI HEADQUARTERS

SI PPY DOWNS, AUST RALI A

CL IENT - YOUI

JOB NO - 4968

LEVEL G - WALL FEATURES

I SSUE: C | 16 MARCH 2016 | FOR PRICING PURPOSES

B risbane

T 61 7 3846 7422W cotteeparker.com.auCottee Parker Architects Pty LtdABN 77 010 924 106

COPYRIGHT COTTEE PARKER ARCHITE CTS P TY. LTD

N

SCALE 1:400 @A3

0 4 8 12 16 20

WALL FEATURES LEGEND

FEATURE WALL ART:Painted "graff iti" artworkFull height

GRAPHIC GLASS FILM :Translucent 3M film lazercut patternsFull height

ACOUSTIC PINBOARD:Woven Image Echotiles pattern & shape varies.Full height

WHITEBOARD / IDEA PAINT:Dulux Idea paintAllow MDF SubstrateFull height

YOUI HEADQUARTERS

SI PPY DOWNS, AUST RALI A

CL IENT - YOUI

JOB NO - 4968

LEVEL 1 & 2 - WALL FEATURES

I SSUE: C | 16 MARCH 2016 | FOR PRICING PURPOSES

B risbane

T 61 7 3846 7422W cotteeparker.com.auCottee Parker Architects Pty LtdABN 77 010 924 106

COPYRIGHT COTTEE PARKER ARCHITE CTS P TY. LTD

N

SCALE 1:400 @A3

0 4 8 12 16 20

WALL FEATURES LEGEND

FEATURE WALL ART:Painted "graff iti" artworkFull height

GRAPHIC GLASS FILM :Translucent 3M film lazercut patternsFull height

ACOUSTIC PINBOARD:Woven Image Echotiles pattern & shape varies.Full height

WHITEBOARD / IDEA PAINT:Dulux Idea paintAllow MDF SubstrateFull height

YOUI HEADQUARTERS

SI PPY DOWNS, AUST RALI A

CL IENT - YOUI

JOB NO - 4968

LEVEL 3 - WALL FEATURES

I SSUE: C | 16 MARCH 2016 | FOR PRICING PURPOSES

B risbane

T 61 7 3846 7422W cotteeparker.com.auCottee Parker Architects Pty LtdABN 77 010 924 106

COPYRIGHT COTTEE PARKER ARCHITE CTS P TY. LTD

N

SCALE 1:400 @A3

0 4 8 12 16 20

WALL FEATURES LEGEND

FEATURE WALL ART:Painted "graff iti" artworkFull height

GRAPHIC GLASS FILM :Translucent 3M film lazercut patternsFull height

ACOUSTIC PINBOARD:Woven Image Echotiles pattern & shape varies.Full height

WHITEBOARD / IDEA PAINT:Dulux Idea paintAllow MDF SubstrateFull height

YOUI HEADQUARTERS

SI PPY DOWNS, AUST RALI A

CL IENT - YOUI

JOB NO - 4968

LEVEL 4 - WALL FEATURES

I SSUE: C | 16 MARCH 2016 | FOR PRICING PURPOSES

B risbane

T 61 7 3846 7422W cotteeparker.com.auCottee Parker Architects Pty LtdABN 77 010 924 106

COPYRIGHT COTTEE PARKER ARCHITE CTS P TY. LTD

N

SCALE 1:400 @A3

0 4 8 12 16 20

WALL FEATURES LEGEND

FEATURE WALL ART:Painted "graff iti" artworkFull height

GRAPHIC GLASS FILM :Translucent 3M film lazercut patternsFull height

ACOUSTIC PINBOARD:Woven Image Echotiles pattern & shape varies.Full height

WHITEBOARD / IDEA PAINT:Dulux Idea paintAllow MDF SubstrateFull height