5-AXIS MACHINING CENTER

GANTRY CONFIGURATION

STAGGER DESIGN

New DESIGN for hard alloys | Stiffened Kinematic ChainsNew ROTARY TABLE equipped with 2 bearings, faster and strongerDamping elements on linear and A axes | HSK100 Electro-spindleFixed ROTARY TABLE configuration for High Performance Turning

Dynamics 60 m/min, 5 m/s2

Thrust 20000 N

Axes Travels X = 1200 mmY = 1200 mmZ = 1450 mm

Spindle A6000 800Nm HSK100A15000 300Nm HSK100

Rotary Table 2000 Kg

Damping Elements Optional(Turcite)

Ballscrews X = 1xø50 (optional 2xø50)Y = 2xø50Z = 2xø50

HIGH TORQUE, NO BLACKLASHUp to 6.000 Nm torque for 5X roughingand smooth finishing with double pinion drive

TILTING HEAD

TECHNICAL SPECIFICATIONS

SPARK 1200 ROTARY TABLE

Column design with increased staggered arrangement (angle + distance)

Reinforced structures close to ballscrew connectionsStiffened bearing supportsOptional double ballscrew on X axis

SPARK 1200

DAMPING

Pallet: 800x800

Drive: Direct Drive

Payload: 2000 Kg

Speed turning/milling: 800 rpm/100 rpm

Contouring S1: 7600 Nm

Clamping Torque: 20000 Nm

Capsizing Torque: 15000 Nm

DYNAMIC DAMPING DEVICECustom solutions for vibration damping to reduce tool wear and improve material removal rate

KINEMATIC CHAINDirect connection for higherdynamic response

LINEAR AXES

Mandelli Sistemi SpAVia Caorsana, 35 - 29122 Piacenza - Tel +39 0523 548548mandelli.info@mandelli.com - www.mandelli.com