Date post: | 11-Nov-2014 |
Category: |
Documents |
Upload: | jeremy-nelson |
View: | 5 times |
Download: | 0 times |
Microsoft® Official Academic Course
Windows Server® 2008 Network Infrastructure Configuration
ISBN: 978-0-470-13327-9
ERRATA
Lesson/Lab Page
Number Correction
Lesson 2 19 The second sentence in Step 6 of Part B should be changed to:
Enter the following IP address information for the W2K8xx computer that
you recorded at the beginning of this lab.
Lesson 2 31 Change Step 3 under “Manage Server Core from the Command Line” to
read as follows”
To add a DNS resolver, key the command string netsh interface ipv4 add
dnsserver “Local Area Connection” <DNS Server IP Address> and press
Enter.
Lesson 3 35 The second sentence in the second paragraph should be changed to:
…as well as such optional configuration items as a preferred and alternate
DNS server or WINS server.
Lab 3 30 The first note on the page should be changed to read as follows:
If a DHCP scope is running on the INSTRUCTOR computer or on a
hardware-based device such as a classroom router, this must be disabled
prior to performing these steps. Since students will install their own
DHCP servers, the classroom subnet must be isolated from the rest of
the school. In addition, since multiple DHCP servers will be installed on
the classroom subnet, be aware that the client connects to the first
DHCP server that responds. Therefore, each PC may not connect to the
DHCP server that might be expected.
Lab 4 50 Change the note to:
Be sure to complete these steps on the even-numbered W2K8yy
computer only!
Lab 4 50 In Step 10 change “adatumcontoso.com” to “adatum.com.”
Lesson/Lab Page
Number Correction
Lab 4 51 Change the last sentence of Step 11 to read as follows:
In the IP address: text box, enter the IP address of the W2K8yy server.
Lab 4 52 In Part B, change Step 2 to read as follows:
Select the W2K8yy node, and then expand the Forward Lookup Zones
node. Select the adatum.com. Right-click on the adatum.com node, and
select Properties.
Lab 4 53 The title of Part D should be changed to:
Part D: CONFIGURING A SECONDARY ZONE FOR CONTOSO.COM ON THE
EVEN-NUMBERED SERVER
Lab 4 57 In Part E, delete a portion of the last sentence of Step 2 to read as follows:
Confirm that the nslookup output matches the A record that you created
in Part D.
Lab 4 59 The keyed portion of Step 1 in Part C should be changed to:
Dnscmd / zoneadd <Network ID>.in-addr.arpa /primary
Lab 5 64 The last sentence in the paragraph below the Note should be:
We will list example IP addresses that we will reference throughout the
lab exercises for clarity.
Lab 5 73 In Step 5 in Part B, the IP address at the end of the step should be:
192.168.11.2
Lab 6 89 The heading of Part A should be:
PART A: CONFIGURING A DFS NAMESPACE ON W2K9xx
Lesson/Lab Page
Number Correction
Lab 6 91-92 In Part A, replace Step 2 with steps 2, 3, and 4 below and renumber the
following steps accordingly:
2. Click StartAdministrative ToolsServer Manager. Select View
Network Connections.
3. Configure the Default Gateway to the address assigned and configure
the DNS server to point to the address of the Instructor server.
4. In the Server Summary in Server Manager, click Change System
Properties in the Computer information section.
Lab 6 93 Step 9 should be changed to:
9. Click Add. The Select Computers screen appears again. Enter the name
of the even-numbered computer, and then click OK. Click Next.
Lab 6 94 Change Step 16 to read as follows:
16. Click OK, followed by Next, followed by Create. On the Confirmation
Screen click Close.
Lab 9 130 The first sentence in Step 1 in Part A should be changed to read:
Press Ctrl+Alt+Delete on the W2K8zz Windows Server 2008 computer…
Lab 9 145-146 In Part A, Step 1 should be added before the current Step 1 and the
following steps should be renumbered:
1. Disable the Lab 9 Connection Security Rule.
Lab 10 154 Step 6 and 7 have words that should be deleted and the sentences should
read as follows:
6. The Select Role Services screen appears. Place a checkmark next to the
Active Directory Certificate Services Role Service, and click Next.
7. The Specify Setup Type screen appears. Select the Enterprise type radio
button, and click Next.
Lab 10 156 In Part B, Step 4 should be changed to read:
4. Expand the W2K8xx-CA node and right-click the Certificates Templates
folder. Then click NewCertificate Template to Issue. Select the OCSP
Response Signing certificate template, and click OK.
Lesson/Lab Page
Number Correction
Lab 10 157 Step 2 in Part A should be modified to:
2. Click Start, followed by Server Manager. In the left-hand pane, expand
the Roles node followed by the Active Directory Certificate Services—
Certificate Templates node.
Lab 10 159 The last sentence in Step 3 in Part A should read:
Click Add Required Roles, and then click Next to continue.
Lab 10 165 Step 1 in the Lab Challenge should be corrected to read:
1. Join the Vistaxx computer to the lucernepublishing.com domain if it is
not already configured as a member of the domain.
Lab 11 176 Step 2 in Part A should read:
2. Expand RolesRoles, then right-click File Services, and choose Add
Role Services.
Lab 11 178 In the Lab Challenge, change the directions in the first paragraph to read
as follows:
Once you have installed a Windows Server 2008 file server, you want to
restrict users’ ability to save different file types onto a particular server in
order to save space on the server.
Lab 11 178 In the Lab Challenge, change the directions in the last paragraph to read
as follows:
Create a file screen template that prevents the storage of .MP3 and .AVI
files on a Windows Server 2008 file server. Then create a file screen that
will enforce this restriction.