MultiCam, Inc.1025 West Royal LaneDFW Airport, TX 75261972.929.4070· Fax: 972.929.4071www.multicam.com· [email protected] specifications subject to change.©2014 MultiCam, Inc. All RIghts Reserved
8000 SERIES5-AXISCNC ROUTER
MultiCam, Inc.1025 West Royal LaneDFW Airport, TX 75261972.929.4070· Fax: 972.929.4071www.multicam.com· [email protected] specifications subject to change.©2014 MultiCam, Inc. All RIghts Reserved
8000 SERIES5-AXISCNC ROUTER
Do you find yourself struggling to meet an ever-growing list of demanding application requirements? Is your business performing at a level below what it’s capable of? At MultiCam, it’s our goal to help you solve these problems by providing you with the right machine to help you succeed.
AUTOMATIC TOOLCHANGER
• 12 - position rotary tool changer
• Bidirectional rotation• Automatic tool length
calibration • Built in tool change
routines• Reduces job times &
setup errors• Improves accuracy
STANDARD WORKING SURFACE
GANTRYGANTRY SUPPORTS
No machine in its class offers more features than the MultiCam® 8000 Series Five-Axis Router.
8000 Series Features
2
• 1" thick 80-82 Durometer phenolic with grid pattern
• Low moisture absorption
• Resists heat and wear
• 0.5" thick, 20" x 12" structural steel tube
• Welded, stress relieved, and precision machined
• 35mm linear bearings on 17” centers
• 76,800 lbs. of bearing support capability
• Heavy-box frame steel weldments
STANDARD FEATURES:• High-Performance OSAI Five-
Axis Control/Drive Package• Stress-Relieved, Precision-
Machined, All-Steel Frame• Unique Ram-Z Axis Assembly• 2,700 IPM Rapid Traverse
• Standard Automatic Tool Calibration
• Leveling Feet• Tool Box• Operations Manual• Electrical Schematics
Our 8000 Series Five-Axis Router is the perfect machine to help you expand your production capabilities, lower production time, and increase overall profits. Its ability to cut while all five axes move simultaneously allows you to be more creative than you ever thought possible with all the ease and precision that you expect.
3
BASE FRAME RAM-Z AXISPRECISION PLANETARY GEARBOXES
HIGH-SPEED HELICAL RACK SYSTEM OSAI CONTROLLINEAR BEARINGS
• One-piece steel frame
• Welded, stress relieved, and precision machined
• 0.5" structural steel tubes with dual 35mm bearing rails
• 12" x 16" structural steel, internally ribbed tube
• High tolerance, precision ground, helical rack-and-pinion system
• Gantry clearances up to 60"
• Finished ground, high-carbon alloy steel gears
• Low backlash• High service life• Efficiency > 97%• Low noise level• Dual stage: 20:1
• Easy-to-use, multitasking operating system
• Compatible with AlphaCam, MasterCam, and other PC-based CAD/CAM software
• Touchscreen interface
• 35mm linear-bearing profile rails• Highly rigid• Low noise• 9,600 lb. load capacity per
bearing
• Top speed of 2,700 IPM in less than 0.5 seconds
• Engages a greater number of teeth than straight racks
• Reduces wear and increases life of rack-and-pinion system
Right now you are asking yourself, “How can I expand my shop’s capabilities, increase my bottom line, and explore my creative potential, while still maintaining an advantage over my competition?” The answer is easy. With an 8000 Series Five-Axis Router from MultiCam, you can effortlessly trim thermoformed molded plastic, create beautiful molded plywood parts for furniture, cut structural aluminum components, and any other application that requires cutting along an angled plane. And you can do all of this with the ease and precision you have come to expect from a MultiCam.
Every machine we make is expertly designed, engineered, and assembled with users like you in mind. You will be amazed with the amount of unrealized creativity our five-axis machine will offer you. By reducing set-up time, increasing accuracy, and expanding your production capabilities, there is nothing holding your business back from reaching its maximum potential. And all of us at MultiCam take great pride in helping you reach that potential.
Five-Axis Applications
4
• 3D Carving• Acrylic Fabrication• Aluminum Fabrication• Architectural Millwork
• Aerospace
• Cabinetry• Exhibits & Fixtures• Signmaking• Thermoformed
trimming• Musical instruments
& more
Applications include:
Molded Plywood Furniture
Composite Turbine Parts
Thermoformed Plastic Trimming
Structural Aluminum Components
Specification ChartMax. Rapid Traverse (inches): (X, Y): 2700 IPM (Z): 800 IPM
Max. Rapid Traverse (meters): (X, Y): 68.6 MPM (Z): 20.3 MPM
Tool Holder: HSK F63/ER-40 Collet
TABLELENGTH
TABLE WIDTH
TABLE HEIGHT
E
Front Top
D
B
A
C
Size Chart (Inches)Model A B C D E
8-204-R 60 121 226 34 1778-205-R 60 145 250 34 1778-206-R 60 169 274 34 1778-207-R 60 193 298 34 1778-208-R 60 241 346 34 1778-303-R 80 100 205 34 1978-304-R 80 121 226 34 1978-305-R 80 145 250 34 1978-306-R 80 169 274 34 1978-307-R 80 193 298 34 1978-308-R 80 241 346 34 197
TABLELENGTH
TABLE WIDTH
TABLE HEIGHT
E
Front Top
D
B
A
C
Size Chart (Millimeters)Model A B C D E
8-204-R 1524 3074 5741 864 44968-205-R 1524 3683 6350 864 44968-206-R 1524 4293 6960 864 44968-207-R 1524 4903 7570 864 44968-208-R 1524 6122 8789 864 44968-303-R 2032 2540 5207 864 50048-304-R 2032 3074 5741 864 50048-305-R 2032 3683 6350 864 50048-306-R 2032 4293 6960 864 50048-307-R 2032 4903 7570 864 50048-308-R 2032 6122 8789 864 5004
8000 Series Specifications
5 Specifications subject to change.
* Size charts represent partial range of table sizes. Custom sizes available upon request.
Clearance Size Chart (Inches) HS300/HS655J F G H I
36 148 24/23 19/11 448 160 36/35 31/23 460 172 48/47 43/35 4
Clearance Size Chart (Millimeters) HS300/HS655J F G H I
914 3760 635/609 558/330 101
1219 4064 939/914 863/635 101
1524 4369 1244/1219 1168/939 101
Tabletop Area
X-Axis
Y-AxisA
B
0˝
11˝
11˝11˝
100°40°
A-Axis
213° 213°
C-Axis
6 © 2014 MultiCam Inc. All Rights Reserved
Specifications subject to change.
HSD HS655 Spindle
HSD HS300 Spindle
HS655 SpecificationsA-Axis Rotation: ±120°
C-Axis Rotation: ±245°A-Axis Average Torque: 500NmC-Axis Average Torque: 600Nm
Weight: 287lbs / 130KgHorsepower: 16kW: 20 hp, 100% Duty Cycle
Max RPM: 24,000Optional C-Axis Slip Ring: Continuous Rotation
HS300 SpecificationsA-Axis Rotation: +40°/-100°
C-Axis Rotation: ±213°A-Axis Average Torque: 480 NmC-Axis Average Torque: 480 Nm
Weight: 111 lbs / 50 KgHorsepower: 7 kW: 9.45 hp, 100% Duty Cycle
Max RPM: 20,000Optional C-Axis Slip Ring: Continuous C-Axis Rotation
* Liquid Cooled* Supported on both sides
* All clearance measurements represented without tooling.
* All measurements represented without tooling.