Date post: | 30-Dec-2015 |
Category: |
Documents |
Upload: | vanna-wilkinson |
View: | 12 times |
Download: | 1 times |
A Solution To RFID Application In Pile Industry Production
ⅰ The purpose of the project
This project aims to apply RFID technology
accurately to record the relatedinformation of pile’s manufacturing
process to track the information of piles’
life cycle. It not only improves pile
production quality, but also brings great conveni-ence for Piles’ management and use.
ⅱ Project specific solutions
A B
A. Get piles’ production information by barcode
B. Put the production information into electronic tags
C. Manage information when piles are used
A. Get piles’ production information by barcode
a. Getting information through the sensor
b. Establishing a control systemc. Creating a database of piles’
production information by barcode
a. Getting information through the sensor
The chart of pile production flow
Centrifuge speed display
Conservation pool temperature curve
Conservation pool temperature display
b. Establishing a control system
We are in the debugger
Control cabinet
PLC control interface
PDA control interface
c. Creating a database of piles’ production information by barcode
As a result of pipe pile are produced in harsh environments, we haven’t found the electronic labels that can withstand pipe pile production environment. Asbarcode has better characteristics, It is used to achieve the goal that each pile corresponds with each piece of information in database one-to-one .
The figure shows how equipment is placed
C. Put the production information into electronic tags
上位机
交换机
232-RJ45转换器
键盘
232-RJ45转换器
232-RJ45转换器
232-RJ45转换器
条码扫描枪 条码扫描枪 条码扫描枪键盘 键盘 键盘
读写器
电子标签
The figure of Network topology
B. Information management when piles is used
In view of electronic tag safety and realizinginformation traceability in the future,Before a pile is used, its electronic tag will be taken down and coded. If needed to know some pile information, we can read the label consistent with his number, which greatly improves the convenience of Piles’ quality tracking.
ⅲ Project summary This project manages applying RFID Accurately to record therelated information of pile’s manufacturing and use process, in the
special environment of piles production with low R&d cost. It not only improves production quality, but also brings great convenience for the management and use piles. No doubt, it will Greatly promote development of Pile industry.
Thank
you!