AC38-127S

TELESCOPIC CRANE

FOR NEW EQUIPMENT SALES, CALL

866.966.2969TO SPEAK WITH AN ALTEC REPRESENTATIVEor visit us online at altec.com

AC38-127SSTANDARD FEATURES OPTIONS

• Altec LMAP (Load Moment & Area Protection) System

» Rated Capacity Limiter

» Displays: Boom Length, Boom Angle, Load on Hook, Percent of Rated Capacity

»OperatorDefinedAudibleAlarmSet-PointsforBoomAngle,Length and Rotational Position

•DualEntry20°TiltCabwithHeaterandA/C

•OutriggerBoomInterlockSystem

•OutriggerMotionAlarm

•WinchDrumRotationIndicator

•Anti-TwoBlockDevice

• WinchControlatLoadHookStowPoint

•HydraulicOilCoolingSystem

•FrontBumperOutrigger

•15,000lb2-SpeedHigh-PerformancePistonWinch

• Rotation Resistant Wire Rope

•ASMEB30.23PersonnelLiftingPackage

»2-Man,SteelPlatform Fixed,800lb(362.8kg)Capacity,or Rotating,1,200lb(544.3kg)Capacity

» Radio Remote Controls

» Fall Protection

• ASMEB30.23CompliantTestWeightPackage

• 1-Piece31ft(9.4m)Jib

• 2-Piece55ft(16.8m)Jib,31ft(9.4m)Retracted

• RotatingFrontBumperOutrigger

• Load Block and Ball Storage on Deck of Crane

• AuxiliaryHoist

• GlideSwing

• Emergency12VDCLoweringSystem

UNIT RECOMMENDEDCHASSISDIM MINIMUMRECOMMENDEDCHASSISSPECIFICATIONS

Model Rear Axle CA (in) WB (in) AF (in) AS (in) Front Axle Rating(lb)

Rear Axle Rating(lb) GVWR(lb)

Frame Sec Modulus(in^3)

Frame RBM (in-lb)

AC38-127S Tandemw/Pusher

205 292 100 54 20,000 44,000 64,000 consultfactory

AC38-127S Tri-Drive 201 288 120 54 20,000 60,000 80,000 consultfactory

CRANE SPECIFICATIONS

MaximumLiftCapacity 76,000lb(34,475kg)

BoomLength(5-Section) 127ft(38.7m)

PoweredSheaveHeight 137ft(41.8m)

MaximumSheaveHeightwith2-StageJib

192ft(58.5m)

StowedTravelHeight 12.9ft(3.9m)

VehicleTravelLength 38ft(11.6m)

3PositionOut-and-DownOutriggers

FullSpan 24ft(7.3m)

Mid Span 15.8ft(4.8m)

Short Span 8.17ft(2.5m)

Control System Pilot-Operated,Hydraulic

ASMEB30.5Compliant

A L T E C | A L T E C . C O M / C R A N E S

LOAD MOMENT AND AREA PROTECTION

TheconvenientLMAPmenunavigationwithanintuitiveuserinterfacedisplaysloadonhook,ratedcapacitypercentage,boomlengthandangle,loadradius,andoperator-definedprotectionwithaudiblealarms.WhiletheintuitivedisplayanduserinterfaceareuniquetoAltec,thesystem’shardwareconsistsofcommon“off-the-shelf”componentsthatwerecriticallyselectedfortheirperformanceandserviceability.

8 6 6 . 9 6 6 . 2 9 6 9 | S A L E S @ A L T E C . C O M

ALTEC OPTI-VIEW® RIDING SEAT*OptionalontheAC38-127S,Altec’sOpti-View® ridingseatcontrolstationmaximizestheoperator’svisibilityoftheworksite.Theoperatorisprovidedwithsafeandconfidentaccesstothecontrolsallwhilemaintainingoperatorcomfort.

LOWER WINCH CONTROLThelowerwinchcontrolhelpspreventboomdamagebyreducingtheflowpressuretothewinchduringstowage.Theoperatorcancontroltheloadblockorballwhilewinchingupordownduringsetupandstowagewithouttheneedtoaccesstheuppercontrolstation.Reducingslip/trip/fallhazardexposure.

OUTRIGGER CONTROLS AT TAILSHELF Outriggercontrolsatthetailshelfallowtheoperatoraccesstothecontrolsfromeithersideofthebedforbestvisibilityofthecontactsurface,whichreducescrushinghazardswhiledeployingtheoutriggers.

DUAL ENTRY CABAsstandardequipmentontheAC38-127S,Altec’sdualentrycabprovidessafeaccess/egressthroughouttheentirerangeofrotation.The20degreetiltfeaturemaximizestheviewingspectrumonthejobsite.

LOAD CHART - FULL SPAN OUTRIGGERS

Note 1:Whenjibiserected,boommustbefullyretractedbeforeloweringbelowminimumboomwithjibangles.Retractedboomwithjibhasnoliftingcapacitybelowa50degreeanglewithfullspanoutriggersand belowa65degreeanglenotshownonjibloadratingchart.Note 2:Donotlowerboomintothisarea,instabilitymayoccur.Hydraulicpressuremaynotallowraisingtheboomwithoutretractingboomfirst.

Chartspublishedhereinareintendedtobeaguideonlyandshouldnotbeconstruedtowarrantapplicationforliftingpurposes.Consultsuppliedoperationmanualforfurtherdetails.

* This feature is not standard equipment for the AC38-127S.

33 Inverness Center ParkwayBirmingham, AL 35242Fax 205.449.4774www.altec.com

For more complete information on Altec products and services, visit us on the web at www.altec.com.

© 2017 Altec IncAll Rights Reserved

Material and specifications are subject to change without notice. Featured units in photos may include optional features. Please contact an Altec representative for all available options. Charts published herein are intended to be a guide only and should not be construed to warrant application for lifting purposes. Consult supplied operation manual for further details.

Altec® and the Altec logo are registered trademarks of Altec Inc in the United States and various other countries and may not be used without permission.

866-966-2969sales@altec.com

AIOSAC38127S-1217-v1-r1