Quality Lighting is a Philips group brand

1611 Clovis R. Barker RoadSan Marcos, Texas 78666Toll Free Phone: (800) 545-1326Fax: (512) 753-1122www.qualitylighting.come-mail: WQE.Info@philips.com

QLW-16G1

Page 1 of 5

Accent

Façade

Parking

Security

Signage

Specifications

LEDs and driver: QLW-16G1 @ 700 mA = 60,000 hours @ 40°C (104˚F).

Fully gasketed Dust-Tite construction. Heavy-duty die-cast aluminum housing. Integral cast aluminum heat sink ensures cool operation. Complete with integral splice chamber. Glass lens.

Functions in environments with operating temperature range from -40°C to 40°C (-40˚F to 104˚F).Class 1, 120-277 V, 50/60 Hz (constant current). Surge protector standard. The surge protector is in accordance with IEEE / ANSI C62.41.2 guidelines, with a surge current rating of 10,000 amps.

Metal core printed circuit board. RoHS compliant.Employs LEDGINE technology - Philips global LED-based optical system. Color temperature: Neutral White 4000 K +/- 250K.

16 LED unit: Type II, III, IV, or Wall Throw distribution. Meets IES Full Cutoff criteria.

Built-in bubble level for accuracy. Universal mounting plate with hook and lock mounting.

Polyester powder coat, electrostatically applied, which is preceded by a pre-treatment process for superior coating adhesion. This process meets or exceeds all ASTM testing requirements, including those for 1,000 hour salt spray endurance testing. Standard finish colors available.

Mechanical, finish and LED engine & components shall be covered by a limited 5-year warranty. See terms and conditions for details.

The fixture shall be ETL and cETL Listed, per UL 1598, suitable for wet locations. Operating temperature range from -40°C to 40°C (-40˚F to 104˚F). QLW-16G1 is a DesignLights Consortium qualified product.

RATED SYSTEM LIFE(LED life per L70)

CONSTRUCTION

DRIVER

LED AND BOARD ARRAY

DISTRIBUTION

MOUNTING

FINISH

WARRANTY

LISTINGS

RoHS2002/95/EC

Pblead-free

projectfixture typecatalog#

© 2012 Philips Group. All rights reserved Due to a program of continuous improvement, Quality Lighting reserves the right to make any variation in design, construction to the equipment described, change specifications and dimensions without notice. Lamp and electrical specifications / availability subject to change by manufacturer without notice.

PT#: QLQS010D1212

QLW-16G1Page 2 of 5

1611 Clovis R. Barker RoadSan Marcos, Texas 78666Toll Free Phone: (800) 545-1326Fax: (512) 753-1122www.qualitylighting.come-mail: WQE.Info@philips.com

Weight: 6.3 Lbs 2.8 kgs

5.7"14.5 cm

11.98"30.4 cm

4.6"11.7 cm

3.3"8.4 cm

Ø 3.5"Ø 2.7"

-- - -- -- -

ORDERING INFORMATION

DISTRIBUTION VOLTAGELED COLOR# of LEDs MOUNTING OPTIONS ACCESSORIESFINISH

ORDERING EXAMPLE QLW-16G1-NW-4L-120-SM-TSA

SERIES DRIVER

QLW 2L

3L

4L

WT

120

208

240

277

UNV

NW16G1 700 SM F1

F2

F3

PCB

DD

DS25/50/751

DM25/50/751

DS25/50/751

DCP

TSA

TDB

TBK

TWHT

TGR

TGN

TPG

RAL(*)

F1-KIT

F2-KIT

F3-KIT

DYN-KIT1

DYN-KIT2

DIMENSIONS

DISTRIBUTIONLED COLOR# of LEDs DRIVER VOLTAGE MOUNTING

ACCESSORIES Must be ordered separately

OPTIONSSERIES

¨QLW 120

208

240

277

UNV

16G1 700 2L Type II

3L Type III

4L Type IV

WT Wall Throw

NW Neutral White

SM Surface Mount (Standard)

F1 Single Fusing 120, 277 V

F2 Double Fusing 208, 240 V

F3 Double Fusing 208, 240 V Canadian Double Pull

PCB Photocell button

DD Dimming Driver (0-10V)

DCP Dynadimmer Custom Programming

F1-KIT Single Fuse Kit 120, 277 V

F2-KIT Double Fuse Kit 208, 240 V

F3-KIT Double Fuse Kit 208, 240 V Canadian Double Pull

DYN-KIT11 Dynadimmer USB Cable Kit (for field programming)

DYN-KIT21 Dynadimmer Handheld Programmer Kit (for field programming)

QLW NW SM

FINISH

TSA Textured Satin Aluminum

TDB Textured Dark Bronze

TBK Textured Black

TWHT Textured White

TGR Textured Gray

TGN Textured Green

TPG Textured Philips Gray

RAL(*) Custom Color (*= Specify RAL #)

16G1 700

ü ü üü ü DS251

DS501

DS751 Dynadimmer Safety Profile

DM251

DM501

DM751 Dynadimmer Median Profile

DE251

DE501

DE751 Dynadimmer Economy Profile

Notes: 1) Dynadimmer options and accessories include Dimming Driver option (‘DD’).

projectfixture typecatalog#

© 2012 Philips Group. All rights reserved Due to a program of continuous improvement, Quality Lighting reserves the right to make any variation in design, construction to the equipment described, change specifications and dimensions without notice. Lamp and electrical specifications / availability subject to change by manufacturer without notice.

PT#: QLQS010D1212

QLW-16G1Page 3 of 5

1611 Clovis R. Barker RoadSan Marcos, Texas 78666Toll Free Phone: (800) 545-1326Fax: (512) 753-1122www.qualitylighting.come-mail: WQE.Info@philips.com

DISTRIBUTION PATTERNAlways download the latest photometrics from the website.See brochure for mounting height guide.

QLW-16G1-NW-3L8’ Mounting height

QLW-16G1-NW-4L8’ Mounting height

QLW-16G1-NW-WT8’ Mounting height

QLW-16G1-NW-2L8’ Mounting height

QLW-16G1-NW-3L12’ Mounting height

QLW-16G1-NW-4L12’ Mounting height

QLW-16G1-NW-WT12’ Mounting height

QLW-16G1-NW-2L12’ Mounting height

Medium, asymmetric throw for defined geometric areas 3L is designed to IES Type III classification.

12’ Mounting Height Guide:To achieve 0.5 fc, space fixtures 58’ apart forward throw reach is 20’

To achieve 1 fc, space fixtures 45’ apart forward throw reach is 15’

Forward throw for perimeter areas. 4L is designed to IES Type IV classification.

12’ Mounting Height Guide:To achieve 0.5 fc, space fixtures 55’ apart forward throw reach is 20’

To achieve 1 fc, space fixtures 42’ apart forward throw reach is 15’

Wall throw is designed to provide a soft, even distribution.

Narrow, forward throw for pathways. 2L is designed to IES Type II classification.

12’ Mounting Height Guide:To achieve 0.5 fc, space fixtures 60’ apart forward throw reach is 15’

To achieve 1 fc, space fixtures 58’ apart forward throw reach is 12’

projectfixture typecatalog#

© 2012 Philips Group. All rights reserved Due to a program of continuous improvement, Quality Lighting reserves the right to make any variation in design, construction to the equipment described, change specifications and dimensions without notice. Lamp and electrical specifications / availability subject to change by manufacturer without notice.

PT#: QLQS010D1212

QLW-16G1Page 4 of 5

1611 Clovis R. Barker RoadSan Marcos, Texas 78666Toll Free Phone: (800) 545-1326Fax: (512) 753-1122www.qualitylighting.come-mail: WQE.Info@philips.com

Measured Junction Temperatures (Tj)QLW 16G1 LED Unit (700mA)

40 50 60 70 80 90 100 110 120 130 140 150 160

70

60

50

40

30

20

10

(25°C ambient) (40°C ambient)

Maximum Tj Limit 127°C

Tj - 82.4°C Tj - 97.4°C

JUNCTION TEMPERATURE (°C)

23%

Bel

ow T

herm

al L

imit

35%

Bel

ow T

herm

al L

imit

Rebel ESL70

lifetime curve

Green shaded portion represents junction temperatures below LED manufacturer’s recommended limit to ensure a minimum of 60,000 hours of rated life.

JUNCTION TEMPERATURES

LIFE EXPECTANCY

Average Outdoor Ambient

Temp

Fixture JunctionTemp (Tj)

Predicted LED Life Expectancy

L70(Hrs)

Fixture Efficacy

(Lumens/Watt)

Predicted LED Life Expectancy @ 10 Hrs/Day

(Yrs)

-15°C / 5°F 42.4 364,481 68 100

-10°C / 14°F 47.4 327,988 68 90

-5°C / 23°F 52.4 295,148 68 81

0°C / 32°F 57.4 265,596 68 73

5°C / 41°F 62.4 239,003 68 66

10°C / 50°F 67.4 215,073 68 59

15°C / 59°F 72.4 193,538 68 53

20°C / 68°F 77.4 174,160 68 48

25°C / 77°F 82.4 156,722 68 43

30°C / 50°F 87.4 141,030 68 39

35°C / 95°F 92.4 126,910 68 35

40°C / 104°F 97.4 114,203 68 31

QLW 16G1 LED (700 mA)

Note: LED rated life per the L70 curve above is 60,000 hrs. The tables below showing potential LED life expectency are based on QLW’s superior thermal management, actual junction temperature (Tj) and projected L70 curves.

Predicted Life Expectancy Table Above the minimum 60,000 Rated LED Life at Multiple Ambient TemperaturesQLW 16G1 LED Unit (700 mA, L70)

Input Watts 36.5

Initial Lumens @ 25°C Ambient 2,487

Lumens per Watt @ 25°C Ambient 68

QLW 16G1 @ 700 mA (‘3L’ distribution, 4000K +/-250K CCT standard)

Notes:

1. Technical data and performance are subject to change.2. Due to LED forward voltage variations and driver efficiency, total system watts could vary +/-4%.

TECHNICAL DATA

projectfixture typecatalog#

© 2012 Philips Group. All rights reserved Due to a program of continuous improvement, Quality Lighting reserves the right to make any variation in design, construction to the equipment described, change specifications and dimensions without notice. Lamp and electrical specifications / availability subject to change by manufacturer without notice.

PT#: QLQS010D1212

QLW-16G1Page 5 of 5

1611 Clovis R. Barker RoadSan Marcos, Texas 78666Toll Free Phone: (800) 545-1326Fax: (512) 753-1122www.qualitylighting.come-mail: WQE.Info@philips.com

QLW-16G1 @ 700 mA

Outdoor Ambient Temp (°C)1 -15 -10 -5 0 5 10 15 20 25 30 35 40

Junction Temperature2 42.4 47.4 52.4 57.4 62.4 67.4 72.4 77.4 82.4 87.4 92.4 97.4

Thermal Factor3 1.05 1.05 1.04 1.03 1.03 1.02 1.01 1.01 1.00 0.99 0.99 0.98

Pred

icte

d Li

feHo

urs

of o

pera

tion

/ Yea

rs b

ased

on

10 h

rs/d

ay b

urn

cycl

e

0 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

8000 / 2.2 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.98 0.98 0.98 0.98 0.98

16000 / 4.4 0.98 0.98 0.98 0.98 0.98 0.97 0.97 0.97 0.96 0.96 0.96 0.95

24000 / 6.6 0.98 0.97 0.97 0.97 0.96 0.96 0.96 0.95 0.95 0.94 0.93 0.93

32000 / 8.8 0.97 0.97 0.96 0.96 0.95 0.95 0.94 0.94 0.93 0.92 0.91 0.90

40000 / 11.0 0.96 0.96 0.95 0.95 0.94 0.94 0.93 0.92 0.91 0.90 0.89 0.88

48000 / 13.2 0.95 0.95 0.94 0.94 0.93 0.92 0.92 0.91 0.90 0.89 0.87 0.86

56000 / 15.3 0.95 0.94 0.93 0.93 0.92 0.91 0.90 0.89 0.88 0.87 0.85 0.84

64000 / 17.5 0.94 0.93 0.93 0.92 0.91 0.90 0.89 0.88 0.86 0.85 0.84 0.82

72000 / 19.7 0.93 0.92 0.92 0.91 0.90 0.89 0.88 0.86 0.85 0.83 0.82 0.80

80000 / 21.9 0.92 0.92 0.91 0.90 0.89 0.88 0.86 0.85 0.83 0.82 0.80 0.78

88000 / 24.1 0.92 0.91 0.90 0.89 0.88 0.86 0.85 0.84 0.82 0.80 0.78 0.76

96000 / 26.3 0.91 0.90 0.89 0.88 0.87 0.85 0.84 0.82 0.80 0.78 0.76 0.74

104000 / 28.5 0.90 0.89 0.88 0.87 0.86 0.84 0.83 0.81 0.79 0.77 0.75 0.72

112000 / 30.7 0.90 0.89 0.87 0.86 0.85 0.83 0.81 0.80 0.77 0.75 0.73 0.70

120000 / 32.9 0.89 0.88 0.87 0.85 0.84 0.82 0.80 0.78 0.76 0.74 0.71 0.69

128000 / 35.1 0.88 0.87 0.86 0.84 0.83 0.81 0.79 0.77 0.75 0.72 0.70 0.67

136000 37.3 0.88 0.86 0.85 0.83 0.82 0.80 0.78 0.76 0.73 0.71 0.68 0.65

144000 / 39.5 0.87 0.86 0.84 0.82 0.81 0.79 0.77 0.74 0.72 0.69 0.67 0.64

152000 / 41.6 0.86 0.85 0.83 0.82 0.80 0.78 0.76 0.73 0.71 0.68 0.65 0.62

160000 / 43.8 0.86 0.84 0.82 0.81 0.79 0.77 0.74 0.72 0.69 0.67 0.64 0.61

168000 / 46.0 0.85 0.83 0.82 0.80 0.78 0.76 0.73 0.71 0.68 0.65 0.62 0.59

176000 / 48.2 0.84 0.83 0.81 0.79 0.77 0.75 0.72 0.70 0.67 0.64 0.61 0.58

184000 / 50.4 0.84 0.82 0.80 0.78 0.76 0.74 0.71 0.69 0.66 0.63 0.60 0.56

192000 / 52.6 0.83 0.81 0.79 0.77 0.75 0.73 0.70 0.67 0.65 0.62 0.58 0.55

200000 / 54.8 0.82 0.80 0.79 0.76 0.74 0.72 0.69 0.66 0.63 0.60 0.57 0.54

LED LUMEN MAINTENANCE DATA

Notes:1. Outdoor ambient temperature is based on annual average operating air temperature as seen by the fixture within its environmental conditions.

2. Junction temperature is calculated from in-situ, solder point measurement per LED manufacturers recommendation, and will vary based on drive current and nominal forward voltage of the LED.

3. Thermal factor is a prorate or derate value based on the in-situ solder point measurement and the relative luminous flux provided by the LED manufacturer.

4. LED Lumen Maintenance Data chart is actual lumen adjustment per the operating ambient. No additional prorate or derate required.