ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca1
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca
Accessories & ComponentsValves & Gates
Issue No. 4
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca2
Components & Accessories Valves & Gates
Table Of Contents
Page 8-12: Bends, Fittings,
Flatbacks, Ceramic, Flo Lined
Page 13-16: Wands,
Angel Hair Traps, Probe Box
Page 17-20: Cyclones,
Bin Vents, Filter
ReceiversHigh Effi ciency
High
• 3 P
• Sta
• Fro
• Sta
• Stre
• Les
Page 21-22: Rail Car Adapters,
Air Diverters, Manifold, Shutoffs
Page 23-25: Camlocks, Hose, Tube & Pipe
Page 26: Custom Fabrications
Page 27-34: 2,3 & 4 Way Diverter Valves
Page 35-38: 2 & 3 Way Slide
Flex Diverter Valves
Page 39-46: Slide Gates
Page 47-50: Maintenance & Roller Gates
Roller Gate - Series “N”
Actuated Roller Gate for gravity
pressure applications*.
differential, consult factory)
Aluminum
construction standard.
Available in sizes from 6” up to 30”
Page 51-56: Gravity Diverters
Page 59-62: Aggregate Diverter
Control Gate
Page 63-68: Options
Application Chart - Warranty
Page 57-58: By Pass Load
Diverter
Page 3-7: Clamps & Couplings
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca3
Clamp*
For Clamping Doors
on Bins, Hoppers, Tanks
& Screw Conveyors
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca4
PATENTED*
Canada 1025783
U.S.A. 4193173
Coupling Specifi cations(Standard & Heavy Duty)
Heavy Duty CouplingStandard Coupling
Quick Release Tube & Pipe Couplings!
• Especially for use in bulk handling, vacuum or
pneumatic conveying lines requiring frequent access
• Handle has positive lock that will not “pop” off during vibration
• Saves money reduces downtime • Patented handle stays with coupling
• No tools required ! • 100% Stainless Steel Construction
• Thick 3/16” Neoprene Gasket
• Drawn together by contraction rather than expansion
which allows greater torque
• Black Neoprene and White Nitrile (Food Grade) Gaskets Standard
(Silicone & Viton available upon request) ®
Utilizing the Clamp!*
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca5
Extension kits are available for 3 & 4 bolt
couplings from 2” O.D. up to 12” O.D.
Consult factory for details.
Extension Couplings for Extra Holding Power
Neoprene - Our standard black gasket for Lorenz Couplings
is perfect for most dry bulk conveying applications. Resists
rotting, checking and cracking from exposure to ozone.
Temperature range (-40° to +200° F) (-40° to +100° C).
White Nitrile - Excellent gasket for all types of conveying
applications. Especially in the food industry. A high quality
FDA approved compound ( -40° to + 100° C).
Silicone - For use in higher temperature applications.
Silicone is odourless, tasteless, non-toxic and non-
corrosive. Available for all Lorenz products (-60° to
+450° F) ( -50° to +230° C).
Viton® - Please consult factory for specifi c details
regarding this product.
® registered trademark of Dow Dupont Elastomers
.005 Copper
Grounding Strip
20 Gauge
Inner Sleeve
20 Gauge
Outer Shell
1/8” Thick Gasket
3/16” x 1 1/4”
Stiffener Bar
1/2” Flat Washer
1/2” Nut Grade 2
1/2” x 2”
Carriage Bolt
Grade 5
The dependable & economical method for connecting pneumatic conveying tube & pipe
For Connecting Pneumatic
Conveying Tube & Pipe
• Easy to install • All sizes stocked
• Galvanized or stainless steel shells available
• Precision cut inner sleeves and gaskets
• Thick 1/8” black neoprene gaskets standard
• White, silicone & Viton® gaskets available
• Thick stiffener bars provide added strength
• Copper anti-static strips included
• Grade 5 full thread bolts won’t strip or break
• Requires only 3/4” tools to install
• Replacement gaskets available
• Gasket protectors available upon request
• Lengths - 2 bolt 4”, 3 bolt 6”, 4 bolt 8”, 5 bolt 10”
Bolted Couplings *
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca6
1.5"OD 150B3GB 15B3SSB 15B3XSB
1.66"OD 166B3GB 166B3SSB 166B3XSB
1.75"OD 175B3GB 175B3SSB 175B3XSB
1.90"OD 19B3GB 19B3SSB 19B3XSB
2"OD 2B3GB 2B3SSB 2B3XSB
2.125"OD 212B3GB 212B3SSB 212B3XSB
2.188"OD 218B3GB 218B3SSB 218B3XSB
2.25"OD 225B3GB 225B3SSB 225B3XSB
2.375"OD 237B3GB 237B3SSB 237B3XSB
2.5"OD 25B3GB 25B3SSB 25B3XSB
2.875"OD 287B3GB 287B3SSB 287B3XSB
3"OD 3B3GB 3B3SSB 3B3XSB
3.25"OD 325B3GB 325B3SSB 325B3XSB
3.5"OD 35B3GB 35B3SSB 35B3XSB
4"OD 4B3GB 4B3SSB 4B3XSB
4.25"OD 425B3GB 425B3SSB 425B3XSB
4.5"OD 45B3GB 45B3SSB 45B3XSB
5"OD 5B3GB 5B3SSB 5B3XSB
5.25"OD 525B3GB 525B3SSB 525B3XSB
5.563"OD 556B3GB 556B3SSB 556B3XSB
6"OD 6B3GB 6B3SSB 6B3XSB
6.25"OD 625B3GB 625B3SSB 625B3XSB
6.625"OD 662B3GB 662B3SSB 662B3XSB
7"OD 7B3GB 7B3SSB 7B3XSB
7.25"OD 725B3GB 725B3SSB 725B3XSB
7.625"OD 762B3GB 762B3SSB 762B3XSB
8"OD 8B3GB 8B3SSB 8B3XSB
8.25"OD 825B3GB 825B3SSB 825B3XSB
8.625"OD 862B3GB 862B3SSB 862B3XSB
9"OD 9B3GB 9B3SSB 9B3XSB
9.25"OD 925B3GB 925B3SSB 925B3XSB
9.625"OD 962B3GB 962B3SSB 962B3XSB
10"OD 10B3GB 10B3SSB 10B3XSB
10.25"OD 1025B3GB 1025B3SSB 1025B3XSB
10.75"OD 1075B3GB 1075B3SSB 1075B3XSB
11"OD 11B3GB 11B3SSB 11B3XSB
11.25"OD 1125B3GB 1125B3SSB 1125B3XSB
11.75"OD 1175B3GB 1175B3SSB 1175B3XSB
12"OD 12B3GB 12B3SSB 12B3XSB
12.25"OD 1225B3GB 1225B3SSB 1225B3XSB
12.75"OD 1275B3GB 1275B3SSB 1275B3XSB
14"OD 14B3GB 14B3SSB 14B3XSB
16"OD 16B3GB 16B3SSB 16B3XSB
18"OD 18B3GB 18B3SSB 18B3XSB
20"OD 20B3GB 20B3SSB 20B3XSB
24"OD 24B3GB 24B3SSB 24B3XSB
Outside
Diameter
3 Bolt
Galvanized Blk
Gasket
3 Bolt
Stainless Shell
Blk Gasket
3 Bolt
100% Stainless
Blk Gasket
1.90"OD 19SB
2"OD 2SB 2HDB
2.125"OD 212SB 212HDB
2.188"OD 218SB 218HDB
2.25"OD 225SB 225HDB
2.375"OD 237SB 237HDB
2.5"OD 25SB 25HDB
2.875"OD 287SB 287HDB
3"OD 3SB 3HDB
3.25"OD 325SB 325HDB
3.5"OD 35SB 35HDB
4"OD 4SB 4HDB
4.25"OD 425SB 425HDB
4.5"OD 45SB 45HDB
5"OD 5SB 5HDB
5.25"OD 525SB 525HDB
5.563"OD 556SB 556HDB
6"OD 6SB 6HDB
6.25"OD 625SB 625HDB
6.625"OD 662SB 662HDB
7"OD 7SB 7HDB
7.25"OD 725SB 725HDB
7.625"OD 762SB 762HDB
8"OD 8SB 8HDB
8.25"OD 825SB 825HDB
8.625"OD 862SB 862HDB
9"OD 9SB 9HDB
9.25"OD 925SB 925HDB
9.625"OD 962SB 962HDB
10"OD 10SB 10HDB
10.25"OD 1025SB 1025HDB
10.75"OD 1075SB 1075HDB
11"OD 11SB 11HDB
11.25"OD 1125SB 1125HDB
11.75"OD 1175SB 1175HDB
12"OD 12SB 12HDB
12.25"OD 1225SB 1225HDB
12.75"OD 1275SB 1275HDB
14"OD 14SB 14HDB
16"OD 16SB 16HDB
18"OD 18SB 18HDB
20"OD 20SB 20HDB
24"OD 24SB 24HDB
Outside
Diameter
Standard Coupling
Blk Gasket
Heavy Duty
Coupling
Blk Gasket
Coupling Size Chart & Part Numbersy y g
NOTE: • For White Gaskets change fi nal letter from B to W.
• For 4, 5, and 6 Bolt models, change the fi nal number in a product code to the corresponding number of bolts you would like to order.
(eg. 150B3GB becomes 150B4GB for 4 bolts.)
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca7
Size Chart
12"
48"
96"
144"
(1')
(4')
(8')
(12')
(4')
(8')
(12')
(16')
up to
up to
up to
up to
dia.
dia.
dia.
48"
96"
144"
192"
Max length per section is 156" (13')
- 1 draw point
- 2 draw points
- 3 draw points
- 4 draw points
over
over
over
Seal Clamps
Bag & Hose
Clamps
PC650PC651PC652PC653PC654PC655PC656PC657PC658PC659PC660PC661PC662PC663PC664PC665PC666PC667PC668PC669PC670PC671PC672PC673PC674PC675PC676PC677PC678PC679PC680PC681PC682PC683PC684PC685PC686PC687PC688PC689PC690PC691
6-7/877-1/87-1/47-3/87-1/27-5/87-3/47-7/888-1/88-1/48-3/88-1/28-5/88-3/48-7/899-1/89-1/49-3/89-1/29-5/89-3/49-7/81010-1/810-1/410-3/810-1/210-5/810-3/410-7/81111-1/811-1/411-3/811-1/211-5/811-3/411-7/812
1-1/21-5/81-3/41-7/822-1/82-1/42-3/82-1/22-5/82-3/42-7/833-1/83-1/43-3/83-1/23-5/83-3/43-7/844-1/84-1/44-3/84-1/24-5/84-3/44-7/855-1/85-1/45-3/85-1/25-5/85-3/45-7/866-1/86-1/46-3/86-1/26-5/86-3/4
PC607PC608PC609PC610PC611PC612PC613PC614PC615PC616PC617PC618PC619PC620PC621PC622PC623PC624PC625PC626PC627PC628PC629PC630PC631PC632PC633PC634PC635PC636PC637PC638PC639PC640PC641PC642PC643PC644PC645PC646PC647PC648PC649
PERMACLAMP SIZE CHART
* Range + 1/8"
Model No. Model No.Closed dia. of
clamp in inches *Closed dia. of
clamp in inches *
Perma Clamps
• 16 gauge thick 304 stainless steel band
• 11 gauge band 96” dia. and over available
• 4" long band lap • ¾" wide band
• 7" long X ½" bolt • Range + ¾" in diameter
• Up to 4 draw points
Standard Features
• 100% stainless steel construction
• ¾" wide 22 gauge band
• Spot welded at joint for strength
• Stainless steel nut & bolt ¼ - 20 thread
• 2 ply band for even distribution of torque
• Manufactured in sizes from 1.5" dia. to 12" dia.
Standard Features
Utilizing the Clamp*
• No tools required
• The convenient way to connect dust bags
to spouts for easy removal
• One piece stainless steel construction
prevents loss of parts
• Custom made on 1” wide stainless steel band
Standard Features
When ordering bag and hose clamps, always specify the O.D. of the
pipe or hose on which clamp will be used, taking into consideration the
resilience of the item being clamped.
Any intermediate size not listed above is also available
*Patented
Canada 1025783
USA 4193173
Size Chart
Order by O.D. Size and Model No.o.
O.D. Model
(inches) Number
3. B 3-L
3.25 C 3-L
3.5 A 3-L or B 35-L
4. A 35-L or B 4-L
4.25 C 4-L
4.5 A 4-L or B 45-L
5. A 45-L or B 5-L
5.25 C 5-L
5.563 A 5-L
6. B 6-L
6.25 C 6-L
6.625 A 6-L
7. B 7-L
7.25 C 7-L
7.625 A 7-L
8. B 8-L
8.25 C 8-L
8.625 A 8-L
9. B 9-L
9.25 C 9-L
9.625 A 9-L
10. B 10-L
10.25 C 10-L
10.75 A 10-L
11. B 11-L
11.25 C 11-L
11.75 A 11-L
12. B 12-L
12.25 C 12-L
12.75 A 12-L
14. A 14-L
16. A 16-L
18. A 18-L
20. A 20-L
24. A 24-L
BAG & HOSE CLAMPS
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca8
Tube & Pipe Bending
ORDER BENDS BY:
Outside Diameter (OD), Wall thickness, Material, Degree of bend, Centre line radius (CLR)
Long & short radius elbows and bends for pneumatic
conveying and vacuum conveying systems. Internal mandrel
bending equipment provides top quality bends from 1" up to
6" O.D. (outside diameter) covering all standard tube & pipe
sizes. Selected materials specific to the conveying industry
provide consistent, uniform and durable bends. 90°, 60°, 45°,
30°, 22° elbows are manufactured for immediate delivery.
Custom offsets and custom bending is available.
Aluminum • Carbon Steel • Stainless • Galvanized
Wall thickness*: 16 gauge (.065"), 14 gauge (.083"),11 gauge (.120"/.125"), Schedules 10, 40, 80
*all specifications are for reference only!
BENDING MATERIAL SPECIFICATIONS*
Aluminum
6063-T1
Extruded
6063-T1
Extruded
Tubing
Pipe
Stainless
304/304L/316
A554/A778/A249
304/304L/316
A312
Carbon
ERW-FC
A513
Black
A53/A312
CLR
OD
90°
90°
TANGENT
45°
45°CLR
OD
TANGENT
BENDING MATERIAL SPECIFICATIONS
Aluminium Stainless Carbon
Tubing 6063-T1 304/304L/316 ERW-FC
Extruded A554/A778/A249 A513
Pipe 6063-T1 304/304L/316 Black
Extruded A312 A53/A312
Tube & Pipe Bending
Aluminum • Carbon Steel • Stainless • Galvanized
ORDER BENDS BY:
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca9
Bending Information
OD(inches)
1-1/2
1-3/4
2
2-1/8
2-3/16
2-1/4
2-1/2
2-3/4
3
3
3-1/4
3-1/2
4
4
4-1/4
4-1/2
5
6
5-3/4, 7, 10, 11-3/4, 18, 24, 30, 36, 48
10-1/4, 11-3/4, 18, 24, 30, 36, 48
7, 10-1/4, 11-3/4, 18, 24, 30, 36, 48
5,10-1/4, 24, 36
10-1/4, 18, 24, 36, 48
11-3/4, 18, 24, 36, 48
6, 10-1/4, 11-3/4, 15-1/2, 18, 24, 30, 36, 48
11-3/4, 18, 24, 30, 36, 48
7-1/2, 18, 24, 30, 36, 48
8-13/16, 11-3/4, 15-1/2, 18, 24, 30, 36, 48
18, 24, 30, 36, 48
11-3/4**, 15-1/2, 18, 24, 30, 36, 48
10, 30, 48
13-5/8, 15-1/2, 18, 24, 30, 36, 48
18, 24, 30, 36, 48
18, 24, 30, 36, 48
30, 36, 48
36, 48
11, 16
16
11, 16
16
16
16
16, 11
11
16
11
11
16, 11
16
11
11
11
11
11
.120, .065
.065
.120, .065
.065
.065
.065
.065, .120
.120
.065
.065, .120
.120
.065, .120
.065, .120
.120
.120
.120
.120
.120
CENTER LINE RADIUS (CLR)(inches) GAUGE
WALL THICKNESS(inches)
TUBE BENDING CAPABILITIES
**11 gauge only
PIPE BENDING CAPABILITIES
^ONLY ALUM IN SCH 10 *ONLY SCHEDULE 40 & UP
O.D.CENTER LINE RADIUS (CLR)
(inches)NOMINALPIPE SIZE
SCHEDULE WALL THICKNESS(inches)
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
4-1/8, 5
6-1/2, 24
5-3/4, 7-5/16, 10-1/4, 18, 24, 30, 48
6-7/8*, 7-13/16*, 10-1/4, 11-3/4, 15-1/2, 18, 24, 30, 36, 48
7-3/8*, 9-7/8*, 11-3/4, 15-1/2, 18, 24, 30, 36, 48
8-13/16, 11-3/4, 15-1/2, 18, 24, 30, 36, 48
10-1/2*, 12*, 13-5/8, 15-1/2, 18, 24, 30, 36, 48
12*, 15-1/2*, 18, 24, 30, 36, 48
20*, 30, 36, 48
24*, 30*, 36^, 48
40
40
40
10, 40, 80
10, 40, 80
10, 40, 80
10, 40, 80
10, 40, 80
10, 40, 80
10, 40, 80
0.133
0.14
0.145
.109, .154, .218
.120, .203, .276
.120, .216, .300
.120, .226, .318
.120, .237, .337
.134, .258, .375
.134, .280, .432
11 .120
18, 24, 30, 36, 48
18, 24, 30, 36, 48
18, 24, 30, 36, 48
18, 24, 30, 36, 48
18, 24, 30, 36, 48
18, 24, 30, 36, 48
18, 24, 30, 36, 48
18, 24, 30, 36, 48
18, 24, 30, 36, 48
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca10
Lateral
Sizes
1 1/2
1 3/4
2
2 3/16
2 1/4
2 1/2
3
3 1/2
4
4 1/2
5
6
8
A
10
10
10
10
10
12
12
16
16
18
18
24
28
30° 45° 60°
B
16
16
16
16
16
18
18
24
24
26
30
36
36
A
10
10
10
10
10
10
10
12
12
16
18
20
20
B
16
16
16
16
16
16
16
20
20
24
24
30
36
A
8
8
8
8
8
8
8
12
12
16
18
20
20
B
14
14
14
14
14
16
16
24
24
24
24
30
36
Sizes
1 1/2
1 3/4
2
2 3/16
2 1/4
2 1/2
3
3 1/2
4
4 1/2
5
6
8
D
12
12
12
12
12
16
16
16
20
24
24
24
28
C
6
6
6
6
6
8
8
8
8
10
10
10
12
Matches
150 lb.
Flange
Pattern
Flange Tube Adapter
(specify sizes)Square 90°
(specify OD)
Threaded Adapter
(male & female)
Dual Straight Through
Lateral
(specify degree)
Segmented Elbow
(specify radius & number of segments)True Wye
(specify degree)Coped Wye
(specify radius)
Transition
(specify outside diameters)
Tees
Sizes
1 1/2
1 3/4
2
2 3/16
2 1/4
2 1/2
3
3 1/2
4
4 1/2
5
6
B
16
16
16
16
16
16
16
20
20
24
24
30
90° Ty
Sizes
1 1/2
1 3/4
2
2 3/16
2 1/4
2 1/2
3
3 1/2
4
4 1/2
5
6
B
16
16
16
16
16
16
16
20
20
24
24
30
Parallel Wye
Pneumatic FittingsSpecification Sheet
Mild Steel • Aluminum • StainlessAll Tubing & Pipe Sizes
Order Pneumatic fittings by O.D., type of metal, wall thickness, radius and/or degree as applicable
3"
Also Available - Drop Line Tees & Common Line Diverters
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca11
Flatback Elbows
NOTE: Standard Flatback Elbows are
available with a choice of 30o, 45
o, 60
o,
or 90o turns.
The fl atback elbows are used in
conjunction with abrasive products.
The convenience of replacing the
back instead of the entire elbow offers
a very economical and time saving
alternative. Available in stainless
steel also.
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca12
Flo-LinedTreatment to Tube and Pipe for preventing “Angel Hair” & “Snake Skin”
in plastics conveying systems
Theory behind “FLO-LINING”
The interior of tube or pipe has a hammered finish applied to it.
The finish is extremely irregular without sharpness encountered in sandblasting.
Testing has proven that the surface hardness increased as much as
10% due to the hammered stress.
Conveying lines which utilize aluminum alloys will work harden
therefore increasing the life of the textured surface.
When orginally tested the hammered finish scored so low that the tests
were repeated several times to be certain that the generation of fines,
fluff and streamers were consistent.
* Copy of 16 page report available upon request.
Process of “Ceramic Lining”
The elbow or fitting is cleaned. The ceramic is pumped into the elbow or fitting and hot air
dried. After the moisture is out of the elbow it is placed in a furnace at 1560 degrees to fuse
the ceramic on the interior of the elbow. The hardness of the ceramic is between 8-10 on the
Moe Scale. This interior coating can be applied as a single coat (6-8 thou thick) or a double
coat (10-12 thou thick). The ceramic lining provides a long lasting interior on elbows or
fittings to prevent abrasion. Carbon steel is the preferred material to line. Stainless steel can
be done as well.
Other services available • Cement backed elbows • Removable back • Flat backed
Ceramic LiningTreatment to Tube and Pipe for reducing abrasion in conveying systems
* Copy of page 16 report available upon request.
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca13
Powder version available upon request
Pick Up WandsFor emptying containers of plastic pellets
Traditional• Aluminum Construction 48” length c/w 6
air holes and stand off loop
Diameter Part #
1.5” OD PT 150 A
1.75” OD PT 175 A
2.00” OD PT 200 A
2.188” OD PT 218 A
2.25” OD PT 225 A
2.50” OD PT 250 A
3.00” OD PT 300 A
3.50” OD PT 350 A
4.00” OD PT 400 A
Basic Air Intake Control• Aluminum Construction 48” length
• Side air intake control
• Adjustable air control and stand off loop
Deluxe Air Intake Control• Aluminum Construction 48” length
• Adjustable air fl ow control c/w screen,
stand off loop
Diameter Part #
1.5” OD PB 150 A
1.75” OD PB 175 A
2.00” OD PB 200 A
2.188” OD PB 218 A
2.50” OD PB 250 A
Diameter Part #
1.5” OD PD 150 A
1.75” OD PD 175 A
2.00” OD PD 200 A
2.188” OD PD 218 A
2.25” OD PD 225 A
2.50” OD PD 250 A
3.00” OD PD 300 A
3.50” OD PD 350 A
4.00” OD PD 400 A
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca14
Angel Hair traps “angel hair”, “streamers” or “snake skins” common in the
conveying of plastic materials at the base of a silo or storage bin.
Standard Features
• Easy clean / removable screens available in stainless
steel or aluminum in 1/2” or 3/4” expanded metal sizes
• Standard unit mounts directly to
16” square bolt hole pattern Maintenance Gates
and Distribution (Probe) Boxes
• Custom sizes available
Aluminum Construction • Low profi le design is only 8 1/2” high
Angel Hair Trap
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca15
Standard Features • The clear viewing cover for level indication can be quickly removed for clean out.
• For use in vacuum lines & pressure conveying systems
• Three standard body sizes are 8” - 10” & 18” with line sizes from 1.5 od up to 6” od.
• Body constructed of 12 gauge 304 stainless steel
• Connects to the line with compression couplings.
Designed to mount in the material stream to collect “angel hair”, “streamers or
“snake skins” while allowing the pellets to pass through.
In-Line Angel Hair Trap
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca16
Probe Box
* Custom confi gurations available
Probe Box
Air Flow Control
For installation below a silo to allow direct routing of
conveying lines.(Multiple outlets available upon request)
Aluminum Construction
Modular Construction
Extensions may be added
Stainless construction optional.
Horizontal Probe allows user to ratio incoming air for proper conveying performance • Aluminum Construction • Stainless construction optional
PART NUMBER OD A B C
HP15A HP15S 1.5 13 9 4.5
HP175A HP175S 1.75 13 9 4.5
HP2A HP2S 2 13.25 9 4.5
HP2188A ------------ 2.188 13.5 9 4.5
HP25A HP25S 2.5 14 9 4.5
HP3A HP3S 3 14 9 4.5
HP35A HP35S 3.5 15 9 4.5
HP4A HP4S 4 17 10.5 6.5
Horizontal Probe
OptionalClean Out
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca17
y
High Effi ciency (HE)
High Effi ciency (HE) for Powders & Fine Materials
• 3 Piece Construction for Easy Cleaning
• Stainless Steel - Carbon Steel - Aluminum
• From 200 CFM to 8000 CFM
• Standard sizes available from 12” to 90”
• Stream Lined Scroll Inlet/Outlet Minimizes Wear
• Less Turbulence, Less Resistance
Normal Effi ciency (NE)
Normal Effi ciency (NE) for Pellets & Larger Materials
• Solid 1 Piece Construction
• Stainless Steel - Carbon Steel - Aluminum
• From 200 CFM to 8000 CFM
• “Straight In” Inlet/Outlet for Heavier Products
• Top Outlet can be Piped to Outside or Dust Collection
Cyclones
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca18
Cyclone InformationHigh Effi ciency (HE) Cyclone Scroll
Inlet/Outlet confi guration
Normal Effi ciency (NE) Cyclone
Inlet/Outlet confi guration
Options
• Mounting brackets • Top Dust Bags
• Access/Cleanout Doors • Multiple Inlets
• Plain End & Flanged Inlets/Outlets • Rotating Tops (HE)
• Perforated Construction • Wear Liners
• Clockwise/Counter Clockwise Inlets/Outlets (HE)
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca19
Inline Vacuum Cyclone
Top Hat Separator
• carbon steel painted construction
•angle iron frame & feet pads
• sealed canister c/w casters & sight glass
• easy clamp removal
• clockwise or counter clockwise inlet rotation
•stainless construction
•larger sizes available
Standard Features
Options
• Convert any drum to economical separator
• Separates fi nes & dust before reaching fi lters of central system
• Manufactured of 14 gauge carbon steel or 0.090” aluminum
• Inlet wear plate - drum - dolley - hose
Standard Features
Dimension Chart in inches
142 1/2
3
4
16
18
A Ø
1 1/2
B Ø
2
10
12
37 12
37
44
62
79
12
16
21
30
C D
26
28
52
62
54
E Ø F
12
12
21
21
21
32
41
32
G Ø
27
27
CFM@2"wg
55
100
160
240
440
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca20
Bin Vents & Filter ReceiverBottom Loaded Pulse Jet
Construction Material Available
• Carbon Steel • Stainless Steel
• Aluminum
Receiver Rating• Pressure 5 PSI • Vacuum 17” Hg
Filter Available• Polyester
• Pleated Elements
Legs & Stands Optional
Round Bin Vents & Filter Receivers
Square Bin Vents & Filter Receiver
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca21
Rail Car Adapter & Filter
RCP2A 2.00 5.25 32.50
RCP25A 2.50 5.25 32.50
RCP3A 3.00 5.25 32.50
RCP4A 4.00 5.25 22.50*
RCP5A 5.00 5.25 24.00
RCP6A 6.00 7 24.00
MODEL # A (OD) B C
* IF REQUIRED LENGTH CAN INCREASE
CB
6 SCH 10 PIPE
A
6 SCH 10 PIPE
A
B
C
For breaking the vacuum in a system
allowing air into the system
Aluminum construction
Air Cylinder controlled
Air Vacuum Diverters(AVD)
Aluminum Construction standard.
Air Pressure Diverter Valve (APD)
vaccuum
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca22
Silo/Hopper Shut OffManifolds
Shut Offs
Standard Features
• Shut off for gravity feed lines of pellets.
• Stainless steel, aluminium & carbon steel construction
• Sizes 1.5” to 6”OD
• Hand or air cylinder actuated
Compressed Air Pick Up WandUse with compressed air to convey materials
• Pneumatic operated
• No moving parts
• High conveying rates
• Great for long distances
• Compact design
Standard Features
Aluminum Construction
Other materials available upon request
Sizes 1 1/2” - 2” - 2 1/2” outside diameter Lengths 48” to 54”
Vacuum Size (inches of water column)
1.5” 44”
2.0” 25”
2.5” 20”
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca23
PART "A"
PART "B"
PART "C"
PART "D"
PART "E"
PART "F"
PART "DC"
PART "DP"
CL15A
CL15B
CL15C
CL15D
CL15E
CL15F
CL15DC
CL15DP
CL2A
CL2B
CL2C
CL2D
CL2E
CL2F
CL2DC
CL2DP
CL25A
CL25B
CL25C
CL25D
CL25E
CL25F
CL25DC
CL25DP
CL3A
CL3B
CL3C
CL3D
CL3E
CL3F
CL3DC
CL3DP
CL4A
CL4B
CL4C
CL4D
CL4E
CL4F
CL4DC
CL4DP
CL5A
CL5B
CL5C
CL5D
CL5E
CL5F
CL5DC
CL5DP
CL6A
CL6B
CL6C
CL6D
CL6E
CL6F
CL6DC
CL6DP
*MALE & FEMALE CAMLOCKS AVAILABLE WITH A STUB TO COUPLE WITH TUBING SIZES
PIPE SIZE (nominal)
PART
CamlocksPART "A"
MALE
PART "D"FEMALE
PART "B"FEMALE
PART "E"MALE
(Hose Shank)
PART "C"FEMALE
(Hose Shank)
PART "F"MALE
PART "DC"DUST CAP
PART "DP"DUST PLUG
Aluminum CamlocksSizes & Part Numbers - Stainless Steel Also Available
Tube Stub Adapters
Threaded Adapters
(Male & Female)
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca24
Neptune
• Clear, food grade, PVC, material-handling hose.
• Smooth bore for better product movement.
• Suction and discharge of pellets and powders.
• Moderate abrasion resistance.
• Temperature range -100C to +650C (150F to 1500F).
• 1.5”ID to 6”ID in 100’ rolls or cut to length.
PU Vac
• Polyurethane hose reinforced with anti-shock helix.
• Smooth, clear, lightweight and flexible
• High abrasion resistance (5X superior to normal PVC).
• Suction and discharge of abrasive powders, fumes, shavings,
chips, grain, cement and plastic pellets.
• Temperature range -200C to +800C (-40F to 1760F).
• 1.5”ID to 6”ID in 100’ rolls or cut to length.
Neptune
Static
• Clear, food-grade, PVC hose with internal static wire.
• Smooth bore for better product movement.
• Suction and discharge of pellets and powders.
• Moderate abrasion resistance.
• Temperature range -100C to +650C (150F to 1500F).
• 1.5”ID to 6”ID in 100’ rolls or cut to length
Stainless &
Galvanized
Steel Hose• Stripwound and interlocked metal hose ideal for pneumatic and
dry-bulk conveying.
• Available with a smooth, abrasion-resistant metal liner for better
product movement.
• Directional flow for optimum performance.
• Various end fittings such as flanges, stub ends and camlocks.
• 1.5”ID to 6”ID from 10’ to 60’ lengths.
Tan
Bulkmaster
• Tan, weather-resistant, EPDM cover with steel helix.
• Smooth, abrasion-resistant, FDA-approved, rubber liner.
• Dry, abrasive materials such as corn, flour, sand, sugar,
limestone powder and plastic pellets.
• Temperature range -320C to +800C (-250F to +1800F).
• 2”ID to 6”ID in 100’ rolls or cut to length.
Super
Vac-U-Flex
• Grey, PVC hose for commercial or industrial vacuum cleaners
and ventilating
• High-strength, fiber-reinforced cover with steel helix offers great
flexibility.
• Temperature range -300C to +650C (-200F to +1500F).
• 1.25”ID to 4”ID in 50’ rolls (except 3” & 4” - 25’) or cut to length.
Consult Factory For Other Types Of Hose Not Listed!
Hose Types / Properties
PVC Hose PVC
StaticHose
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca25
Tube & Pipe Straights
Aluminum • Carbon Steel • Stainless • Galvanized
Most sizes are in stock
and ready to ship.
Common Approx.
Name Wall O.D. Aluminum Carbon Stainless Galvanized*1.25” Sch 40 .140" 1.66” 125S40AP 125S40CP 125S40SP 125S40GP1.25” Sch 80 .191" 1.66” 125S80AP 125S80CP 125S80SP 125S80GP1.5” Sch 40 .145" 1.9” 15S40AP 15S40CP 15S40SP 15S40GP1.5” Sch 80 .200" 1.9” 15S80AP 15S80CP 15S80SP 15S80GP2.0” Sch 10 .109" 2.375” 2S10AP 2S10CP 2S10SP 2S10GP2.0” Sch 40 .154" 2.375” 2S40AP 2S40CP 2S40SP 2S40GP2.0” Sch 80 .218" 2.375” 2S80AP 2S80CP 2S80SP 2S80GP2.5” Sch 10 .120" 2.875” 25S10AP 25S10CP 25S10SP 25S10GP2.5” Sch 40 .203" 2.875” 25S40AP 25S40CP 25S40SP 25S40GP2.5” Sch 80 .276" 2.875” 25S80AP 25S80CP 25S80SP 25S80GP3.0” Sch 10 .120" 3.5” 3S10AP 3S10CP 3S10SP 3S10GP3.0” Sch 40 .216" 3.5” 3S40AP 3S40CP 3S40SP 3S40GP3.0” Sch 80 .300" 3.5” 3S80AP 3S80CP 3S80SP 3S80GP3.5” Sch 10 .120" 4.0” 35S10AP 35S10CP 35S10SP 35S10GP3.5” Sch 40 .226" 4.0” 35S40AP 35S40CP 35S40SP 35S40GP3.5” Sch 80 .318" 4.0” 35S80AP 35S80CP 35S80SP 35S80GP4.0” Sch 10 .120" 4.5” 4S10AP 4S10CP 4S10SP 4S10GP4.0” Sch 40 .237" 4.5” 4S40AP 4S40CP 4S40SP 4S40GP4.0” Sch 80 .337" 4.5” 4S80AP 4S80CP 4S80SP 4S80GP
Standard Pipe
Standard TubingO.D. Wall Aluminum Carbon Stainless Galvanized*1.5” 16 Gauge / .065" / 1/16" 1516AT 1516CT 1516ST 1516GT1.75” 16 Gauge / .065" / 1/16" 17516AT 17516CT 17516ST 17516GT2.0” 16 Gauge / .065" / 1/16" 216AT 216CT 216ST 216GT2.0” 11 Gauge / .125" / 1/8" n/a 211CT 211ST 211GT2.125” 16 Gauge / .065" / 1/16" n/a 212516CT 212516ST 212516GT2.188” 16 Gauge / .065" / 1/16" 218816AT n/a n/a n/a2.25” 16 Gauge / .065" / 1/16" 22516AT 22516CT 22516ST 22516GT2.5” 16 Gauge / .065" / 1/16" 2516AT 2516CT 2516ST 2516GT2.5” 11 Gauge / .125" / 1/8" 2511AT 2511CT 2511ST 2511GT3.0” 16 Gauge / .065" / 1/16" 316AT 316CT 316ST 316GT3.0” 11 Gauge / .125" / 1/8" 311AT 311CT 311ST 311GT3.5” 16 Gauge / .065" / 1/16" n/a 3516CT 3516ST 3516GT3.5” 11 Gauge / .125" / 1/8" 3511AT 3511CT 3511ST 3511GT4.0” 16 Gauge / .065" / 1/16" 416AT 416CT 416ST 416GT4.0” 11 Gauge / .125" / 1/8" 411AT 411CT 411ST 411GT4.5” 11 Gauge / .125" / 1/8" 4511AT 4511CT 4511ST 4511GT5.0” 16 Gauge / .065" / 1/16" n/a 516CT 516ST 516GT5.0” 14 Gauge / .083" / 3/32" n/a 514CT 514ST 514GT5.0” 11 Gauge / .125" / 1/8" 511AT 511CT 511ST 511GT6.0” 14 Gauge / .083" / 3/32" n/a 614CT 614ST 614GT6.0” 11 Gauge / .125" / 1/8" 611AT 611CT 611ST 611GT7.0” 14 Gauge / .083" / 3/32" n/a 714CT n/a 714GT8.0” 14 Gauge / .083" / 3/32" n/a 814CT 814ST 814GT8.0” 11 Gauge / .125" / 1/8" 811AT 811CT 811ST 811GT
10.0” 14 Gauge / .083" / 3/32" n/a 1014CT 1014ST 1014GT10.0” 11 Gauge / .125" / 1/8" 1011AT n/a 1011ST n/a10.0” 10 Gauge / .134" / 9/64" n/a 1010CT n/a n/a
* Contact factory for galvanized options
5.0” Sch 10 .134" 5.563” 5S10AP 5S10CP 5S10SP 5S10GP5.0” Sch 40 .258" 5.563” 5S40AP 5S40CP 5S40SP 5S40GP5.0” Sch 80 .375" 5.563” 5S80AP 5S80CP 5S80SP 5S80GP6.0” Sch 10 .134" 6.625” 6S10AP 6S10CP 6S10SP 6S10GP6.0” Sch 40 .280" 6.625” 6S40AP 6S40CP 6S40SP 6S40GP6.0” Sch 80 .432" 6.625” 6S80AP 6S80CP 6S80SP 6S80GP8.0” Sch 10 .148" 8.625” 8S10AP 8S10CP 8S10SP 8S10GP8.0” Sch 40 .322" 8.625” 8S40AP 8S40CP 8S40SP 8S40GP8.0” Sch 80 .500" 8.625” 8S80AP 8S80CP 8S80SP 8S80GP
Most sizes are in stock
and ready to ship.
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca26
Custom FabricationsStainless Steel & Aluminum Specialists
Hoppers
Surge Bins
Call us for a quote!!!!
Dust Collection Fittings
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca27
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca28
261/2 351/4371/2
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca29
2 Way Diverter Valves Series “D”- Y Confi guration
Available in Sizes
from 2” up to 12”
Inlets & Outlets available in Tube & Pipe Sizes
in Stainless Steel, Aluminum & Carbon Steel
Pneumatic actuated 2
way diverter valve for
vacuum or low pressure*
conveying systems.
*(Dilute phase up to 15 psig max)
Standard Features
• Positive blade lock (PBL) between blade & cylinder rod
• Internal magnetic piston, cushioned air cylinder
• Active compression seal (ACS)
• Polished stainless steel blade
• Light weight aluminum Body construction
• Temperature rated for up to 82ºC (180ºF)
• Double acting or single acting spring return solenoid or manual lever valve
• NEMA 4 watertight & dust tight electrics
• Wall thicknesses of 16, 14 & 11 gauge, schedule 10, 40 & 80
• Fully tested prior to shipping
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca30
Options
• Position switches 110 volt AC & 24 volt DC • Manual hand wheel operation
• Proximity switches • Special seal confi gurations
• Oversized air cylinders • Solenoids 110 volt AC or 24 volt DC
• Valve body sealed for sir purging • NEMA 7-9 hazardous locations
• Inlets/outlets - straight or fl anged ends • High temperature modifi cations(Class I, Groups B, C&D, Class II, Groups E, F, & G)
2 Way Diverter Valves - Series “D”“Y” Confi guration
DV2-Y - Side View
DV2-150 1 1/2 7 1/4 4 1/8 5 5 3/4 14 3/4 2 1/2 30
DV2-200 2 7 1/4 4 1/8 5 5 3/4 14 3/4 2 1/2 30
DV2-2188 2 3/16 8 4 6 7 3/4 18 3/8 3 1/2 30
DV2-2375 2 3/8 10 1/8 5 1/8 6 7 3/4 18 3/8 3 1/2 30
DV2-250 2 1/2 8 4 1/8 6 7 3/4 18 3/8 3 1/2 30
DV2-2875 2 7/8 10 5 6 7 3/4 18 3/8 3 1/2 30
DV2-300 3 8 5/8 4 1/8 6 7 3/4 18 3/8 3 1/2 30
DV2-350 3 1/2 12 3/4 6 1/8 7 10 1/2 22 3/4 5 30
DV2-400 4 10 3/8 4 1/8 7 10 1/2 22 3/4 5 30
DV2-450 4 1/2 13 3/4 6 1/8 9 12 3/4 25 3/4 6 30
DV2-500 5 12 5/8 5 1/8 9 12 3/4 25 3/4 6 30
DV2-5563 5 9/16 15 1/4 6 1/8 10 14 3/4 30 1/8 7 30
DV2-600 6 13 7/8 5 1/8 10 14 3/4 30 1/8 7 30
DV2-6625 6 5/8 15 1/2 7 11 21 3/8 40 1/4 10 45
DV2-800 8 19 1/8 9 1/8 12 21 1/2 38 1/2 10 45
DV2-8625 8 5/8 19 3/4 8 1/4 14 24 1/2 44 1/4 12 45
DV2-1000 10 21 3/4 9 5/8 15 3/4 28 1/4 49 1/2 14 45
DV2-1075 10 3/4 22 3/4 9 3/4 15 3/4 28 1/4 49 1/2 14 45
DV2-1200 12 24 1/4 9 3/4 16 29 49 1/2 14 45
Dry, fi ltered & lubricated actuating air @ 80 PSIG minimum, 200 PSIG maximum recommended
Model number Size A B C E F G H R
DV2-Y - Top View
E
F GH
B
C
R
A
H
38
air
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca31
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca32
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca33
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca34
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca35
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca36
2 Way Slidefl ex Diverter Valve - Series “P”
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca37
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca38
E
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca39
Series “E” - Slide Gates
“LSP” - Lightweight
Stud Pattern
Stud bolt fl anged tube
connection for light duty applications.
“TPS” - Tube & Pipe Stubs
Tube & pipe stubs for
compression couplings.
Pneumatic actuated slide gate for
vacuum or low pressure*
conveying systems
Standard Features• Positive blade lock (PBL) between blade & cylinder rod
• Internal magnetic piston, cushioned air cylinder
• Active compression seal (ACS)
• Polished stainless steel blade
• Light weight aluminum body construction
• Temperature rated for up to 82O
C (180O
F)
• Double acting or single acting spring return solenoid
or Manual lever valve
• NEMA 4 watertight & dust tight electrics
• Wall thickness of 16, 14 & 11 gauge, schedule 10, 40 & 80
• Fully tested prior to shipping
* Dilute phase up to 15 psig max)
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca40
Series “E” - Slide Gates“LSP” - Lightweight
Stud Pattern“TPS” - Tube & Pipe Stubs
Orifice conforms to inside diameter of pipe or tube
A B C E F G H M N
DO2 8/74 8/72 5 8/54 4/131 5 4 8/73 CN81-61/5 8/7
DO61/32 8/74 8/72 6 5 8/151 5 4 8/73 CN81-61/5 8/7
DO8/32 8/74 8/72 6 5 8/151 5 4 8/73 CN81-61/5 8/7
DO2/12 8/74 8/72 6 4/35 61 5 4 8/73 CN81-61/5 8/7
DO8/72 8/74 8/72 6 4/35 61 5 4 8/73 CN81-61/5 8/7
DO3 8/74 8/72 6 8/76 61 5 4 5 CN81-61/5 8/7
DO2/13 8/74 8/72 7 8/77 02 5 4 5 CN81-61/5 8/7
DO4 8/74 8/72 7 8/77 02 5 6 2/15 CN81-61/5 8/7
DO2/14 8/74 8/72 9 2/18 2/122 5 6 2/15 CN81-61/5 8/7
DO5 8/74 8/72 9 8/101 42 5 8 2/16 CN81-61/5 8/7
DO61/95 8/74 8/72 01 8/101 42 5 8 2/16 CN81-61/5 8/7
DO6 8/74 8/72 01 8/111 2/152 5 8 2/17 CN81-61/5 8/7
DO8/56 8/74 8/72 11 21 4/362 5 8 2/17 CN81-61/5 8/7
DO8 8/74 8/72 21 8/141 2/103 5 8 2/19 CN81-61/5 8/7
DO01 8/75 8/72 41 8/371 8/553 7 8 2/111 CN81-61/5 8/7
DO4/301 8/75 8/72 41 8/371 8/553 7 21 2/111 CN81-61/5 8/7
DO21 8/75 8/72 61 8/702 4/114 7 21 61/3131 CN81-61/5 8/7
DO4/321 8/75 8/72 61 8/702 4/114 7 21 61/3131 CN81-61/5 8/7
DO41 8/75 3 81 8/532 64 7 21 61 CN81-61/5 8/7
THREAD SIZE,
STUD LENGTH
FLANGEDIMENSIONS
DO2/11
DO2 8/74 8/72 5 8/54 4/131 5 4 8/73 CN81-61/5 8/7
DO61/32 8/74 8/72 6 5 8/151 5 4 8/73 CN81-61/5 8/7
DO8/32 8/74 8/72 6 5 8/151 5 4 8/73 CN81-61/5 8/7
DO2/12 8/74 8/72 6 4/35 61 5 4 8/73 CN81-61/5 8/7
DO8/72 8/74 8/72 6 4/35 61 5 4 8/73 CN81-61/5 8/7
DO3 8/74 8/72 6 8/76 61 5 4 5 CN81-61/5 8/7
DO2/13 8/74 8/72 7 8/77 02 5 4 5 CN81-61/5 8/7
DO4 8/74 8/72 7 8/77 02 5 6 2/15 CN81-61/5 8/7
DO2/14 8/74 8/72 9 2/18 2/122 5 6 2/15 CN81-61/5 8/7
DO5 8/74 8/72 9 8/101 42 5 8 2/16 CN81-61/5 8/7
DO61/95 8/74 8/72 01 8/101 42 5 8 2/16 CN81-61/5 8/7
DO6 8/74 8/72 01 8/111 2/152 5 8 2/17 CN81-61/5 8/7
DO8/56 8/74 8/72 11 21 4/362 5 8 2/17 CN81-61/5 8/7
DO8 8/74 8/72 21 8/141 2/103 5 8 2/19 CN81-61/5 8/7
DO01 8/75 8/72 41 8/371 8/553 7 8 2/111 CN81-61/5 8/7
DO4/301 8/75 8/72 41 8/371 8/553 7 21 2/111 CN81-61/5 8/7
DO21 8/75 8/72 61 8/702 4/114 7 21 61/3131 CN81-61/5 8/7
DO4/321 8/75 8/72 61 8/702 4/114 7 21 61/3131 CN81-61/5 8/7
DO41 8/75 3 81 8/532 64 7 21 61 CN81-61/5 8/7
All dimensions in inches
DO2/11 8/74 4 5 8/54 4/131 5
DO2 8/74 4 5 8/54 4/131 5
DO61/32 8/74 4 6 5 8/151 5
DO8/32 8/74 4 6 5 8/151 5
DO2/12 8/74 4 6 4/35 61 5
DO8/72 8/74 4 6 4/35 61 5
DO3 8/74 4 6 8/75 61 5
DO2/13 8/74 6 7 8/77 02 5
DO4 8/74 4 7 8/77 02 5
DO2/14 8/74 6 9 2/18 2/122 5
DO5 8/74 5 9 8/101 42 5
DO61/95 8/74 5 01 8/101 42 5
DO6 8/74 5 01 8/111 2/152 5
DO8/56 8/74 7 11 21 4/362 5
DO8 8/74 9 21 8/141 2/103 5
DO8/58 8/74 9 31 2/141 4/303 5
DO01 8/75 9 41 8/371 8/553 7
DO4/301 8/75 9 41 8/371 8/553 7
DO21 8/75 9 61 8/702 4/114 7
DO4/321 8/75 9 61 8/702 4/114 7
DO41 8/75 9 81 8/532 64 7
Orifice conforms to inside diameter of pipe or tube
A B C E F G H
5
9
5 7/8
9
10
10
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca41
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca42
Orifice conforms to inside diameter of pipe or tube
A B C E F G H MHOLEDIA. N
“SB” - Stud Bolt
Diagram shown with studs
Slide GatesSeries “E” -
All dimensions in inches
“BBH” - Blind Bolt Hole
“BTV” - Bolt Through Valve
DO2/11 8/74 8/13 5 8/54 4/131 5 8/5 5 4 8/73 CN11-8/5
DO2 8/74 8/13 5 8/54 4/131 5 8/5 6 4 4/34 CN11-8/5
DO61/32 8/74 8/13 6 5 8/151 5 8/5 6 4 4/34 CN11-8/5
DO8/32 8/74 8/13 6 5 8/151 5 8/5 6 4 4/34 CN11-8/5
DO2/12 8/74 8/13 6 4/35 61 5 8/5 7 4 2/15 CN11-8/5
DO8/72 8/74 8/13 6 4/35 61 5 8/5 7 4 2/15 CN11-8/5
DO3 8/74 8/13 6 8/75 61 5 8/5 2/17 4 6 CN11-8/5
DO2/13 8/74 8/13 7 8/77 02 5 8/5 2/17 4 6 CN11-8/5
DO4 8/74 8/13 7 8/77 02 5 8/5 9 8 2/17 CN11-8/5
DO2/14 8/74 8/13 9 2/18 2/122 5 8/5 9 8 2/17 CN11-8/5
DO5 8/74 8/13 9 8/101 42 5 8/5 01 8 2/18 CN01-4/3
DO61/95 8/74 8/13 01 8/101 42 5 8/5 01 8 2/18 CN01-4/3
DO6 8/74 8/13 01 8/111 2/152 5 8/5 11 8 2/19 CN01-4/3
DO8/56 8/74 8/13 11 21 4/362 5 8/5 11 8 2/19 CN01-4/3
DO8 8/74 8/13 21 8/141 2/103 5 8/5 2/131 8 4/311 CN01-4/3
DO8/58 8/74 8/13 31 2/141 4/303 5 8/5 2/131 8 4/311 CN01-4/3
DO01 8/75 8/33 41 8/371 8/553 7 4/3 61 21 4/141 CN01-4/3
DO4/301 8/75 8/33 41 8/371 8/553 7 4/3 61 21 4/141 CN01-4/3
DO21 8/75 8/33 61 8/702 4/114 7 4/3 91 21 71 CN9-8/7
DO4/321 8/75 8/33 61 8/702 4/114 7 4/3 91 21 71 CN9-8/7
DO41 8/75 8/33 81 8/532 64 7 4/3 12 21 4/381 CN8-1
Orifice conforms to inside diameter of pipe or tube
A B C E F G H J K M NTHREAD
SIZE
FLANGE DIMENSIONS
DO2 8/74 2 2/15 8/54 4/131 5 2 8/3 4/34
DO61/32 8/74 2 4/16 5 8/151 5 2 8/3 4/34
DO8/32 8/74 2 4/16 5 8/151 5 2 8/3 4/34
DO2/12 8/74 2 4/16 4/35 61 5 2 8/3 2/15
DO8/72 8/74 2 4/36 4/35 61 5 2 8/3 2/15
DO3 8/74 2 4/36 8/75 61 5 2 8/3 6
DO2/13 8/74 2/12 8/57 8/77 02 5 2 8/3 6
DO4 8/74 2/12 8/57 8/77 02 5 4 8/3 2/17
DO2/14 8/74 2/12 2/18 2/18 2/122 5 4 2/1 2/17
DO5 8/74 2/12 2/18 8/101 42 5 4 2/1 2/18
DO61/95 8/74 2/12 2/19 8/101 42 5 4 2/1 2/18
DO6 8/74 2/12 2/19 8/111 2/152 5 4 2/1 2/19
DO8/56 8/74 2/12 2/19 21 4/362 5 4 2/1 2/19
DO8 8/74 2/12 21 8/141 2/103 5 4 2/1 4/311
DO8/58 8/74 4/32 31 2/141 4/303 5 4 2/1 4/311
DO01 8/75 4/32 2/131 8/371 8/553 7 4 2/1 4/141
DO4/301 8/75 4/32 4/341 8/371 8/553 7 4 2/1 4/141
DO21 8/75 4/32 2/171 8/702 4/114 7 4 2/1 71
DO4/321 8/75 4/32 2/171 8/702 4/114 7 4 2/1 71
DO41 8/75 4/32 91 8/532 64 7 4 2/1 4/381
9
10
2 1/2
2 1/2
12
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca43
Series "U" Slidegate(Sized for ID of 1/8” Wall Tube)
Standard Features
O O
fi
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca44
Series "U" Slidegate
¼” Polyethelene Gasket
Options
Tube stubs
Hi-temp kits
Solenoids
Position Switches
Pre-wired terminal box
Flange adapters & transition
9 1/2 9 3/4
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca45
Standard Features• Stainless steel material contact points
• Dust tight seals
• Lightweight aluminum frame, corrosion resistant
• Rated for 82oC (180oF)
Push-Pull Slide GateSeries “E”
For Gravity Flow Applications and Vacuum
Available in sizes 2” to 12”
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca46
Options• 316 stainless material contact
• High temperature service
Push Pull Slide Gate
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca47
Standard Features• Hand crank or hand wheel actuation
• Polymer liner • Clear covers standard
• 304 stainless steel contact points &
polished stainless steel blade
• Narrow profi le, lightweight aluminum frame
• Constant pressure woven Tefl on seals
• Fully lined nylon interior
• Standard gate rated for 110o C (230o F)
• Fully tested prior to shipping
Maintenance Gate - Series “A”Handcrank actuated maintenance
gate for vacuum or low
pressure* systems.*(Dilute Phase up to 15psig max)
Aluminum
construction
standard.
Available in sizes
from 6” up to 16”Round
Square
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca48
Maintenance Gate - Series “A”
Maintenance Gate Valve - Square Orifi ce
Maintenance Gate Valve - Round Orifi ce
• Air cylinders, hand wheel, electric or chain wheel actuation
• Solenoids - single or double acting 110 volt AC & 24 volt DC NEMA 4 (available NEMA 7 class 1, Groups B, C & D, class II Groups E, F, & G)
• Stainless steel or carbon steel construction • Clear covers
Options
Stainless steel • Clear covers
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca49
Roller Gate - Series “N”
Pneumatic Actuated Roller Gate for gravity
flow or low pressure applications*.
*(no pressure differential, consult factory)
Aluminum
construction standard.
Available in sizes from 6” up to 30”
Standard Features
• Positive blade lock (PBL) between blade & cylinder rod
• Internal magnetic piston, cushioned air cylinder
• Polished stainless steel blade
• Narrow profi le, light weight aluminum frame
• Adjustable nylon cam rollers for dust tight seal on blade
• Constant pressure nylon seals on blade
• Fully lined polymer interior
• Regular fl ange patterns or CEMA fl anges to match screw conveyors
• Standard gate rated for 82o C (180o F)
• Fully tested prior to shipping
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca50
Options
• Solenoids - single or double acting 110 volt AC & 24 volt DC NEMA 4 (available NEMA 7 class 1, groups B, C & D, class II groups E, F, & G)
• Oversized air cylinders
• Hand wheel, hand crank, electric or chain wheel actuation
• Position switches mounted on air cylinder NEMA 4, 110 volt AC & 24 volt DC
• High temperature modifi cations available
• Stainless steel
• Clear covers
Roller Gate - Series “N”Regular Flange
Regular
CEMA Flange
CEMA
18 3/4 14 1/4
9”
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca51
Gravity Diverters
Standard Features
• For dry gravity fl ow applications providing a seal to the atmosphere• Sizes from 4” up to 30”
• Stainless steel, carbon steel & aluminum construction• All valves come with square inlets and outlets standard
• Blade pocket protects leading edge of blade from wear and directs fl ow of material away
• Suitable for up to 82o C (180o F) • Replaceable active compression shaft seal and urethane blade seal
• Valves come standard with double acting, magnetic piston air cylinder
Sealed Units
Series "L"
3-Way Sealed
Gravity Diverters2-Way Sealed
Gravity Diverters
Options
• Square to round transitions available• Removable door for cleaning & seal replacement (knobs optional)
• Solenoids - double or single acting• High temperature modifi cations available
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca52
3-Way Sealed
Gravity Diverters
G
E
F
B
C
D
30O
A B C D E F G H WT. Material
4 18 ¼ 9 24 7/8 17 5/8 18 16 ¼ 12 100 10 ga
6 20 ½ 10 ½ 29 5/8 20 5/8 21 18 13 3/4 150 10 ga
8 24 12 ½ 35 3/8 24 5/8 25 21 15 3/4 200 10 ga
10 25 ½ 14 40 1/8 27 3/4 28 22 17 3/4 250 10 ga
12 28 ½ 16 46 31 3/4 32 24 ½ 19 3/4 300 10 ga
14 31 ½ 18 51 5/8 35 3/4 36 27 24 450 3/16
16 35 20 57 3/8 39 5/8 40 30 26 525 3/16
18 38 ½ 22 65 3/4 43 5/8 44 33 28 600 3/16
45O
A B C D E F G H WT. Material
4 15 ¼ 8 21 5/8 4 ½ 11 3/8 12 3/8 12 100 10 ga
6 18 9 3/4 26 5/8 4 3/4 13 3/4 14½ 13 3/4 150 10 ga
8 21 11 ½ 31 ½ 5 ¼ 16 ¼ 16 3/4 15 3/4 200 10 ga
10 23 13 35 7/8 5 18 3/8 18 17 3/4 250 10 ga
12 26 14 3/4 40 7/8 5 ½ 20 7/8 20 3/8 19 3/4 300 10 ga
14 29 16 ½ 45 3/4 6 1/8 23 3/8 22 5/8 24 450 3/16
16 32 ½ 18 ½ 51 1/8 7 26 1/8 25 3/8 26 525 3/16
18 36 20 ½ 58 7 3/4 29 28 ¼ 28 600 3/16
Dimensions
G
E
F
B
C
D
HH
B
C
D
C
E
F
G
H
G
D
CC
EF
B
H
GE
F
D
C
H
B
Dimensions
2-Way Sealed
Gravity Diverters
45O
45O
( 30o leg optional)
SizeSize
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca53
Unsealed Gravity DivertersSeries "B"
Standard Features
• Stainless Steel, Aluminium & Carbon Steel Construction
• 3" to 14" sizes • Standard with round inlets/outlets
• Manual (hand) actuation or air cylinder controlled
• Confi gurations - 45o
- "ST" • 30o
- "Y"
• Options: Solenoids, limit switches, square inlets/outlets
2 Way & 3 Way
60o
A B C D
3 3 16 1/8
11 1/8
3.5 3 16 7/8
11 7/8
4 3 17 1/4
12
4.5 3 18 1/2
13 1/2
5 3 19 3/8
14 3/8
6 4 25 18 1/8
8 4 28 1/8
21 1/2
10 6 39 1/8
28 5/8
12 8 49 3/4
36 1/8
14 8 50 3/4
37
Y Confi guration
45o
A B C
3 3 20
3 1/2
3 21
4 3 23
4 1/2
3 24
5 3 25
6 4 32
8 4 37
10 6 51
12 8 64
14 8 69
ST Confi guration
Options: • All dimentions in inches - subject to change! • Standard 14 gauge (.083”) body & 11 gauge (.120”) blade up to 5”.
• Over 5” 11 gauge (.0125”) body & 3/16
gauge (.187”) blade.
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca54
Multi Port Diverter Systems
Standard Features
fl
Line Controllers
Features & Benefi ts
fi
fi
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca55
Standard Features• Stainless steel material contact points • Dust tight seals
• Lightweight aluminum frame, corrosion resistant
• Choice of stainless, aluminum and carbon inlets and outlets
• 60o confi guration standard -45o optional
• No internal ledges for product to collect• Rated for 82oC (180oF)
Gravity V DiverterSeries “G”
For Gravity Flow Applications
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca56
Gravity V DiverterFor Gravity Flow Applications
Options• 316 stainless material contact
• High temperature service• Hand wheel or crank, electric actuation
• Single and double solenoids• Variable and infi nite positioning controls
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca57
Standard Features• Stainless steel material contact points
• Lightweight aluminum frame, corrosion resistant• Positive blade lock (PBL) between blade and cylinder rod
• Active compression seals (ACS)• Internal magnetic piston cushioned air cylinder
• Stacking design for multiple conveying lines• Rated for 82oC (180oF)
Pneumatic actuated
diverter valve for vacuum or
low pressure* conveying systems.
Fills hoppers via cyclonic
separation in the inlet load tube and
exhausting air in the outlet tube.
Valves can be stacked on top of each other
allowing multiple sources to multiple hoppers.
Available in sizes 2” to 8”.
By Pass Load DiverterSeries “F”
For Pneumatic Conveying Systems Applications
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca58
By Pass Load Diverter
Options
• 316 stainless material contact points
• High temperature service
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca59
2-Way Aggregate Diverter ValveSeries “J”
Standard Features
• Sizes from 6” to 24”• Heavy duty carbon steel construction
• Standard magnetic piston cushioned air cylinder• 45 degree off leg standard
• Access door for maintenance and inspection of valve
AG Diverter designed for gravity fl ow applications
of dry aggregate materials.
Options
• 30 degree off leg
• Hand wheel/lever or chain wheel actuators
• Square to round transitions • High temperature kits
• Dead pocket detector • Interior polymer liners
• Pocketed liner • Solenoids & position switches
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca60
30o Off Leg (Optional)
45o Off Leg (Standard)
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca61
Aggregate Control GateSeries “C”
• 6” - 30” sizes
• Heavy Duty Carbon Steel Construction
• Standard Hand Wheel Actuated
Features & Benefi ts
Gate for controlling dry, gravity fl ow aggregates.
• AR Plate Blade
• Square to round transitions • Hi Temp Kits
• Internal magnetic cushioned air cylinder
• Solenoids & position switches • Hand lever, chain wheel
Options
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca62
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca63
OptionsValves & Gates
Pre-wired Terminal Boxes
• NEMA 4 water/dust tight enclosure end mounted on air cylinder.• Comes complete with all wires, fi ttings and connections, simply bring power and air supply to box and unit is ready.
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca64
OptionsValves & Gates
Air-Purged Body
c/w Gauge & Regulator
• Body of valve is sealed &
pressurized to prevent passing
of product into valve cavity
• User sets to 2psi greater
than conveying pressure
Special Service Inlets
A special service inlet directs the fl ow of material towards the centre of the valve, preventing shearing and packing of material. Recommended when closing on a column of material, gravity fl ow and abrasive materials.
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca65
Valve Electrical Controls
• Includes metal panel enclosure (NEMA 4,X)
• On-Off switch standard • Uses relays 110 volt AC or 24 volt DC
• Pre-wired terminal box required if mounted more than 9 ft (3 m) from valve
(specify distance)
Details
2 Push Button2 Position Push Button (open and closed)
For simple open and closed operations
• Includes metal enclosure (NEMA 4,X) with 3 lighted push buttons
• On-Off switch standard
• Uses programmable relay 110 volt AC or 24 volt DC
• Operates from closed to open then centre or open to closed then centre
• Variable position is manually adjustable by moving centre position switch
• Pre-wired terminal box required if mounted more than 9 ft (3 m)
from valve (specify distance)
Details
Variable Centre Position (dribble feed)Operates from closed to open then centre or open to closed then centre.
Variable position is manually adjustable by moving centre position switch.
Available on slide gates, roller gates
Movable variable position switch
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca66
Infi nite Position Controls
• Infi nite position controls allow for gate to be open to a
specifi ed opening size*
• 110 volt AC or 24 volt DC, NEMA 4 enclosure operates by PLC
• On & off selector switch
• Rotary position control switch on panel controls opening of valve
(can be wired directly to a PLC)
Details
Available on Slide Gates, Roller Gates
*Does not control amount of fl ow just provides opening.
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca67
Application Chart
Valve Type Series Sizes Pressure Gravity Vacuum Mounting Actuator
15 psig max. Note: “Hand” includes crank & wheel
Diverter Valves - 2 Way - ST or Y confi guration D 1.5”-12” • • horiz/vert Air, Hand, Electric
3 Way D 2”-8” • • horiz/vert Air, Hand, Electric
4 Way D 2”-8” • • horiz/vert Air, Hand, Electric
Slide Gate - TPS-LSP-BBH-SB-BTV E 1.5”-14” • • • horiz/vert Air, Hand, Electric
Push-Pull Slide Gate E 2”-12” • horiz/vert Hand
Slide Gate Unlined Orifi ce U 1.5”-12” • • • horiz/vert Air, Hand, Electric
Slide Flex 2 Way & 3 Way p 2”-8” • • horiz/vert Air, Hand, Electric
Roller Gate N 6”-30” • horiz Air, Hand, Electric
Maintenance Gate A 6”-16” • • • horiz Air, Hand
By Pass Load Diverter F 2”-8” • • horiz Air, Hand, Electric
Gravity V Diverter G 5” - 24” • horiz Air, Hand, Electric
Gravity Diverter Sealed 2 Way L 4”-30” • horiz Air, Hand Lever
3 Way L 4”-18” • horiz Air, Hand Lever
Gravity Diverter Unsealed 2 Way & 3 Way B 3”-14” • horiz Air, Hand Lever
Aggregate Control Gate C 6”-30” • horiz Air, Hand, Electric
Aggregate Diverter Valve 2 Way J 6”-18” • horiz Air, Hand, Electric
This chart is for reference only.
Please contact a customer service representative for more details.
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca68
19305 Printed in Canada May 2008.
All products manufactured to ISO 9001-2000 standard.
Warranty
has a limited warranty on
air cylinders and solenoids
for 24 months
Any modifications to any valve other than recommended maintenance voids the warranty.
Complete Assemblies
Pre-assembled Manifolds