Acoustic PanelsOverview:Price acoustic panels are typically 1-6” thick and provide lab-rated noise attenuation and customized solutions along with industry-leading drawing packages and installation instructions.
Fire Rating:
· Flame Spread: < 25
· Smoke Development: < 50
Materials:
· Galvanized Steel
· Stainless Steel (304, 316)
· Aluminum
Acoustic Panel Dimensions: · Standard Width: 12” – 45”
*Spans that exceed 45” will be built in multiple panels, then field assembled (by others)
· Standard Height: 6”-144” (max. 120” with cut outs)
*Custom sizes are available
· Standard Thickness:
2”, 4” or 6” *Custom sizes are available
Features & Options: · 18 Gauge solid casing
· 22 Gauge perforated liner
· 16 Gauge floor panels
· Glass and mineral fiber media
· Tongue and groove joints
· Full length stiffeners
· Integral silencers
· Access doors and panels
· Optional ventilation
· Media protection & coverings
· Painted finishes
Perforated/Solid Metal Panel for higher NRC
Solid/Solid Metal Panel for higher STC
Models
· QLP2 = 2” thick Acoustic Panel
· QLP4 = 4” thick Acoustic Panel
· QLP6 = 6” thick Acoustic Panel
THICKNESS
HEIGHT
WIDTH
Price Noise Control
Test data is obtained in accordance with ASTM E90 and ASTM C423 test standards for transmission loss and absorption coefficients, respectively.
Transmission Loss (dB) Measured at Octave Band Center Frequencies Overall
Model 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz STC
QLP2 16 22 30 37 43 48 34
QLP4 17 27 37 48 56 60 39
Absorption (Coefficient) Measured at Octave Band Center Frequencies Overall
Model 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz NRC
QLP2 0.50 0.83 1.05 0.95 1.00 1.10 0.80
QLP4 0.88 1.17 1.07 0.96 1.01 1.10 1.15
1. Straight Wall or BarrierProvides a barrier between the noise source and receiver. Acoustic barrier noise control applications include: mechanical equipment, manufacturing facilities, transportation noise and industrial applications.
3. Plenum EnclosureHVAC acoustic plenums attenuate noise within a ducted fan system application. Plenums are typically large boxes connected to a fan with multiple ducts to aid in air distribution.
2. Multiple Walls or Surrounding BarrierPartial enclosures contain and reduce noise transmission to nearby receivers. They provide both sound transmission loss (STC) and sound absorption (NRC).
4. Acoustic EnclosureAcoustic enclosures can be used to reduce radiated noise from mechanical equipment. They can also be used for test cells, rooms, booths and air handler casings.
Typical Configurations:
Performance Data:
ApplicationsPrice Acoustic Panels & Enclosures are custom designed to provide practical & effective noise control solutions.
Acoustic panels effectively reduce unwanted
radiated noise from various mechanical equipment
including turbines, pumps, motors, compressors,
air handlers, cooling towers, and generator sets.
Applications include:
· Custom enclosures for noisy mechanical equipment
· Acoustic / Thermal plenums
· Noise barriers
· Observation / Control rooms
· Testing environments
· Factory offices
For additional information, please contact [email protected]
Custom enclosure
Acoustic Panel EnclosureTongue & Groove Construction
Manual - InstallatIon
Document #: IM-001 Revision #: 00 Issue Date: 12/31/13© 2013 Price Industries Limited. All rights reserved.
Acoustic Enclosure with Silencers
Plenum enclosure
NOW AVAILABLE:
Acoustic Enclosure Installation Manual
Price Noise Control
Product Improvement is a continuing endeavour at Price. Therefore, specifications are subject to change without notice. Consult your Price Sales Representative for current specifications or more detailed information. Not all products may be available in all geographic areas.
All goods described in this brochure are warranted as described in the Limited Warranty shown at the web site www.priceindustries.com
The Price catalog is available online at www.priceindustries.com
www.priceindustries.com ® Price is a registered trademark of Price Industries Limited. © 2014. Printed in Canada 2014 | 06/16/14v002