+ All Categories
Home > Documents > address-QK- - Industrie Computer und Komponenten von ICP iEi · 2012-08-18 · LKMM>>> DM/SRM>>...

address-QK- - Industrie Computer und Komponenten von ICP iEi · 2012-08-18 · LKMM>>> DM/SRM>>...

Date post: 23-Mar-2019
Category:
Upload: vanthien
View: 214 times
Download: 0 times
Share this document with a friend
26
o vide r CERT EN ISO 9001 PIAGP>> >> M> LKM DM/SRM>> WS>> HMI>> H
Transcript

ETX>>

WAFER>>

ov

ide

r

NOVA>>

PC/104>>

CHASSIS>>

CERTEN ISO 9001

PIAGP>>

>>M>LKM

DM/SRM>>

WS>>

HMI>>H

20

03

Vo

l.1

Industrial Computer Products

ICP Deutschland GmbHHumboldtstra e 36D-70771 Leinfelden-EchterdingenTel. +49 (0) 711- 45 96 00 - 30Fax +49 (0) 711- 45 96 00 - [email protected]

!

SPECIFICATIONS

WS-846AGPMPC-55/57AGP

12.1" TFT LCD PIAGP RAID Workstation

Analog VGAInput

ORDERING INFORMATION

■ Membrane Keypad (59 keys) (WS-846AGP)■ Optional touch screen T-R121B/ T-R151B/ T-R170B with RS-232 interface■ Operation Temperature: 0 ~ 50oC■ Relative Humidity: 5-95%, non-condensing.■ Vibration: 5 ~ 17 Hz, 0.1" double amplitude displacement 17 ~ 640 Hz, 1.5G acceleration peak to peak.■ Shock: 10G acceleration peak to peak. (11ms)■ Color: White (Pantone 413C)

OSD (On ScreenDisplay)

Power Switch

FDDTwo Removable HDD

USB

Slim CD ROM

Most cost-effective Workstation with RAID and AGP Slot Solution Most cost-effective Workstation with RAID and AGP Slot Solution Most cost-effective Workstation with RAID and AGP Slot Solution

15"/ 17" TFT LCD PIAGP RAID Workstation

Option■ SAGP-815EV: PIAGP® Socket-370 Based CPU Board ■ SAGP-845EV: PIAGP® Socket-478 Based CPU Board ■ SAGP-648E: PIAGP® Socket-478 Based CPU Board with Serial-ATA, AGP 8X, ■ AVGA-X400: Xabre400 AGP 8X VGA card with on board 64MB DDR SDRAM■ LPISA-KIT01: LPC-to-ISA Bridge Module (SAGP-648E)■ PISA-KIT01: PCI-to-ISA Bridge Module (SAGP-845EV and SAGP-815EV)■ T-R121B, T-R151B, T-R170B (Resistive type touch screen with RS-232 interface)■ T-C151, T-C170B (Capacitive type touch screen with RS-232 interface)

■ WS-846AGP: 19" Rackmount, 6U Height Industrial PIAGP Workstation■ MPC-55AGP, MPC-57AGP: 15"/ 17" TFT LCD Industrial PIAGP Workstation■ PCIAGP-6SR included, supports standard AGP 4X/8X and RAID function■ Ship with Slim 24X CD-ROM and FDD■ Two Removable 3.5" IDE HDD Drive Bay, supports JBOD (spanning), RAID 0 (Striping), RAID 1 (Mirroring)■ WS-846AGP ship with 300W PFC ATX Power Supply, MPC-55/57AGP ship with ACE-832AP 300W PFC ATX power supply■ Metal front panel design (WS-846AGP)■ Aluminum front panel meets IP65/ NEMA 4 standard (MPC-55/57AGP)

■ WS-846AGP 6U 7-slot 12.1" TFT LCD PIAGP RAID Workstation ■ MPC-55AGP 15" TFT LCD PIAGP RAID Workstation ■ MPC-57AGP 17" TFT LCD PIAGP RAID Workstation

LCD Display Module 12.1" TFT LCD 15" TFT LCD 17" TFT LCD

Resolution 800 x 600 1024 x 768 1280 x 1024

Brightness 250 cd/m2 250 cd/m2 250 cd/m2

LCD MTBF 50000 hrs 50000 hrs 50000 hrs

Backlight MTBF 30000 hrs 30000 hrs 30000 hrs

RAID solution industrial workstationprovides AGP slot and ship with PCIAGP-6SR backplane, FDD, slim CD-ROM

MPC-55AGP SAGP-648E

WS-846AGP

SAGP-845EVSAGP-815EV

PCIAGP-6SR AVGA-X400

Membranekeypad (59 key)

PIAGP backplane provides AGP slot and RAID function

Xabre AGP 8XVGA card

NEW

1-3

PIAGP RAID SolutionPIAGP RAID SolutionPIAGP RAID Solution

SPECIFICATIONS

SAGP-648E

ORDERING INFORMATION

SAGP-648E PIAGP socket-478 base CPU Board with AGP 8X

CF-512 CPU cooling fan support P4 CPU up to 2.5GHz

PIAGP® Socket-478 Based CPU board with Serial-ATA, AGP 8X, 1394

CF-512 High performanecooling fan

ORDERING INFORMATION

SPECIFICATIONS

■ AVGA-X400 : Xabre400 on board 64MB DDR SDRAM with DVI Dual display function

Longevity Guaranteed

PERFECT FOR IEI PIAGP PRODUCT SERIES

Serial-ATA SiS 648 / SiS 963

CF II

Support Intel P4/Celeronup to 533 MHz FSB

LPT

COM

LAN

USB 2.0

Keyboard/Mouse

COM

Serial 8XAGP

(Ordered seperately)

NEW

■ CPU: Socket-478 base support Intel® Pentium® 4/ Celeron™ up to 533MHz FSB ■ System chipset: SiS648 + SiS963 ■ System memory: 2 x DDR266/333 DIMM DRAM socket up to 2GB■ Support AGP 4X/ 8X interface (Add-on AGP card required)■ SSD: One Compact Flash™ Type II socket ■ Audio: AC’97 Codec, 6W Amplifier( support line-in, line-out, mic-in, speak-out) ■ Ethernet: On-Chip SiS900, 1 x 10/100Mbps Ethernet with RJ-45 onboard■ I/O: – 2 x RS-232 serial port – 1 x PS/2 connector for keyboard/mouse – 1 x LPT parallel port supports SPP/ ECP/ EPP Mode – 4 x USB 2.0 – 2 x ATA-133 IDE channel supports CD-ROM, SIP, and LS-120 drive bootable – 2 x Serial-ATA, equipped with 2 Serial-ATA cable set – 1 x FDD connector■ IEEE-1394: 2 x IEEE-1394a 400Mbps port onboard (RTL8801)■ WDT: Software programmable supports 1 ~ 255 sec system reset■ Hardware Monitoring : Provides CPU Vcore, Vcc, CPU/ system fan speed and temperature detecting function■ Digital I/O: TTL Level 4-Input; 4-Output■ Power control function: Meets ACPI 1.1 specification■ Power Consumption: [email protected], -12V@60mA, [email protected]( P4 2.4G/ DDR333)■ Operation Temperature: 0~55oC■ Relative Humidity: 5~95%, non-condensing

ATX 12V

FSB 533DDR 333

USB 2.0

LPISA-KIT01 LPC-to-ISA Bridge Module

CF-513 CPU cooling fan support P4 CPU up to 3.06GHz

CF-513 Copper base high performane cooling fan(Ordered seperately)

Note: It is recommanded to use AGP 2X with the SAGP- 815EV single board computer.

Supperts Dual DisplaySupperts Dual DisplaySupports Dual DisplaySupports Dual DisplaySupports Dual Display

AVGA-X400Xabre AGP 8X VGA Card

VGA

VGA

TV

DVI

■ Chip: SiS Xabre400 + SiS 301 ■ V-RAM: On board 64 MB DDR SDRAM■ Resolution: MAX. 2048x1536, 32bit for CRT display■ Support AGP 8X bus to enhance graphics performance ■ I/O Connector: - Support CRT display: 1 x 15 pin D-SUB15 VGA Connector, 1 x by pin-header - Support DVI interface■ Dual Display: Supports VGA & VGA or VGA & TV-Out or VGA & LCD

Supports Hyper- Supports Hyper-

Threading TechnologyThreading Technology

Supports Hyper-

Threading Technology

Serial-ATACable sets

1-4

2-1

Human-Machine Interface No Second Thought in Industrial Automation and Controls!!

Your Best Platform Choice

Advantages of Windows CE .NETWin CE .NET provides an integrated end-to-end tool set which helps manufacturing software applications integrated easily and seamlessly together, and reduce both operating system and applications developing time, achieving faster time-to-market purposes:

Offer tiny and reliable core system services that enable the most demanding real-time embedded design across a breadth of devices

Windows CE .NET framework provides the portability of developed applications across all Microsoft windows systems, such as Windows 98, NT, 2000, XP, etc.

Low cost by each run-time licenseModular design for flexibility and extensibility Run on many different processors, some with very

low power consumptionInstant power shutdown

The Adoption of ETX Module IEI Inc. is introducing a HMI product line, a practical hardware platform for HMI/SCADA software applications, which is made very easy to connect to PLC and Internet by offering LAN and communication ports. Besides it is very cost-effective to upgrade in the future based on its ETX architecture. HMI application vendors are able to save lots of cost by just upgrading the CPU module to get the performance scalability.

Specifications

■ Plastic front panel, meets NEMA4 / IP65 standard■ Embedded ETX-EDEN-400 / ETX-GX-300 CPU module■ Equipped with 128MB SDRAM and IDE cable■ Equipped with 48MB DOM (Disk on Module) with Windows CE.NET pre-installed■ Ethernet: 2x 10/100 Mbps RTL8100BL LAN chips■ I/O: 2 x RS-232 serial port ,1 x RS-232/422/485

1 x VGA port, 1 x parallel port, CF II 2 x USB 1.1 port, PS/2 port, 2 x LAN port 2 x Audio port (1 x Mic-in, 1 x Line-out)

■ Stardard equipped with resistive touch screen ■ Standard equipped with ACE-855A power supply (5V@10A, 12V@4A), and one 6 cm removable cooling fan

■ Optional: ACE-855C, + 24V DC input power supply ACE-845V, +12V DC input power supply

■ Operating Temperature: 0 ~ 50oC■ Vibration: 5-17Hz, 0.1" double amplitude displacement

17-640Hz, 1.5G acceleration peak to peak■ Shock: 10G acceleration peak to peak (11ms)■ Color: Dark Blue (Pantone 433C)■ Net / GW: 3.0 / 5.0 (kg)

Size Resolution

800 x 600640 x 480

262 K250cd/m2

50000hrs

25000hrs

Brightness Color LCDMTBF

BacklightMTBF

gg

HMI-084HMI-104

8.4"10.4"

ModelTFT LCD

ETX-GX-300 ETX CPU module with NS GX1-300MHz CPU

ETX-EDEN-400 ETX CPU Module with VIA Eden-400MHz CPU

■ HMI- Size / CPU Module / Power Supply / CE

084: 8.4" LCD104: 10.4" LCD

None: No.CE: with Windows CE .NET

Ordering Information

ACE-855AACE-855CACE-845V

HMI-084

HMI-084HMI-104

InternetCOM

USB

Sound I/F

Parallel

PS/2

VGA

3698725

Ethernet

311.7212.1172.0

241.

8

129.

516

0.0

6.8 58.3

293.0

291.0

223.

0

221.

0

Windows DNA in ManufacturingIntegration between applications

ERP/MRP II

DCS Batch

HMI MES SCADA

COM / DCOM Connector / XML

OPC / COM / DCOM / OMAC

OPC / COM / DCOM / OMAC / XML

PC-Based Control

OPC / CO

M

COM

PLCDevice

SmartDevice

CEDevice

I/O

User friendly design to easy use Compact Flash

2-2

RLM-15015" Foldable 1U Height

Rack-mounting LCD Monitor

■ 1U Height designed to save rack space■ Plastic front panel■ Material : Heavy-duty steel■ The front panel of RLM-150 has two self-clinchings with lock■ 15” high brightness TFT LCD – Resolution : 1024X768 XGA – Brightness : 250cd/m2

– LCD MTBF : 50,000 hrs – Backlight MTBF : 30,000 hrs – Panel color : 262K display color – Viewing angle : 160 (Horizontal) x 160 (Vertical) – Pixel Pitch : 0.297(H) x 0.297(W) – Contrast ratio: 400 : 1 typical■ Front OSD control keys to adjust the best display quality■ Standard D-sub 15 Pin VGA Input connector■ Ship with power adapter for 100~240 VAC input■ Optional resistive type touch screen with RS-232 interface■ Color : White(Pantone 413C) , Black (Pantone Black)■ Storage Temp : -20~60oC■ Operating Temp : 0~50oC■ Vibration : 5~17Hz, 0.1”double amplitude displacement 17~640 Hz,1.5G acceleration peak to peak ■ Shock : 10G acceleration peak to peak (11ms)■ Relative Humidity : 5~95% , non-condensing■ Depth : 510 mm■ Net/GW : 9/17(kg)

SPECIFICATIONS

ORDERING INFORMATION

NEW

Dimensions : (RLM-150)

Main Feature

2 self-clinching locks to stabilize the monitor position

RLM-150 C 1U Height 15" Foldable LCD Monitor C : Color code W: WHITE B: BLACKOptional : T-R151B 15” 3M resistive touch screen

RLM-150 is intelligently designed with its foldable 1 U height rack-mounting feature, which minimizes space utilization of server racks. The two self-clinching locks stabilize the monitor position and prevent it from sliding out in all circumstances.The equipped analogVGA input function of RLM-150 enables an easy use of LCD panel without the need to concern about the VGA card type. Its high level of compatibility ensures a stable and quality performance with almost all sorts of computers, workstation and servers.

OSD (On Screen Display)Key Pads

Multiple sliding locks to adjust a best-fit angle of the monitor

■ Foldable 1 U height rack-mounting design

■ 3 sliding locks to adjust monitor position

■ High level of brightness (over 250 cd/m)

■ Wide viewing angle

■ OSD (On Screen Display) function

■ Optional resistive touch screen function

Analog VGAInput

2-3

ORDERING INFORMATION

Optional: - RK-150. RK-170: Rackmount Kit - ARM-31: Loading capacity from 7 to 14kg

SPECIFICATIONS

PPC-5070PPC-5050 Series

17" TFT LCD Panel PC

15" TFT LCD Panel PC

■ Panel mountable and VESA standard Arm mountable■ Plastic/Aluminum front panel, meets NEMA 4 / 65 standard■ Hight Brightness TFT LCD – Brightness: 250 cd/m2 (PPC-5070), 350 cd/m2 (PPC-5050 series) – LCD MTBF: 50,000 hours – Backlight MTBF: 50,000 hours

■ Accepts one half-size PCI add-on card■ Operating Temp.: 0~50oC■ Vibration: 5-17Hz, 0.1" double amplitude displacement 17-640Hz, 1.5G acceleration peak to peak■ Shock: 10G acceleration peak to peak (11ms)■ Color: Dark Blue (Pantone 433C), White (Pantone 413C)■ Optional: Resistive or capacitive type Touch Screen and Rackmount Kit■ Net/GW: 8/12 (kg)(PPC-5050A), 8.5/12.5(kg)(PPC-5052), 10/14(kg)(PPC-5070)

Dimensions : (PPC-5050A)

Dimensions : (PPC-5052)

POS-370Socket-370 Base Full Function

POS BoardWith LCD/CRT VGA,

10/100MbpsEthernet, DIO & Audio

POS-566Socket-7 Base Full Function

POS BoardWith LCD/CRT VGA,

10/100MbpsEthernet, DIO & Audio

PPC-5052 131mm

Removable 3.5" HDD for IDE I/F

3.5"FDD

Large-View screen with comparableultra slim size!

C : Color Code D : Dark Blue (Pantone 433C), W : White (Pantone 413C)M : Front Panel Material Code AL: Aluminum , None: Plastic

131.00

Dimensions : (PPC-5070)

Slim FDD

Slim CD-ROM

93.4mm

Accepts one half-sizePCI add-on card

Support compact flash(POS-370 SBC only)

POS-EDEN-400-64MBEmbedded Low Power VIA

Eden Full Function Board With

LCD/CRT VGA, LAN, Audio,64MB RAM

Note: PPC-5050A/5052 series plastic front panels are not suitable for capacitive touch screen

PPC-5070 C - AL

PPC-5050A C - M

PPC-5052 C - M

SBC Touch ScreenPower Supply

566 (POS-566)

370N (POS-370N)

370R (POS-370R)

E400-64MB (POS-EDEN-400-64MB)

T-R170B T-C170B

T-R (T-R151B)T-C (T-C151)

Model

ACE-916AP

Products

SBC

Display Type

Max. Resolution

HDD Drive Bay

FDD Drive Bay

CD-ROM

Power Supply

PPC-5070

17" TFT LCD

1280 x 1024

2 x 2.5" internal HDD

1 x 3.5" slim FDD

1 x slim CD-ROM

UPF200-AA 200W

Industrial ATX with PFC

PPC-5050A PPC-5052

15" TFT LCD

1024 x 768

1 x 2.5" internal HDD

1 x 3.5" slim FDD

1 x slim CD-ROM

ACE-916AP 150W AT Full Range with PFC

1 x 3.5"

removable HDD

1 x 3.5" FDD

POS-370 / POS-566 / POS-EDEN-400

NEW Analog VGA

Input

PPC-50XX series feature a modular design with varsatile options for different combinations like, aluminum/plastic front panel, removable HDD drive bay, and embedded board. The large view screen provides higher resolution but the whole system is still comparably slim by equipping thin-type FDD, CD-ROM etc. CompactFlash is an alternative storage choice except hard drive. Its fanless requirement enables operation in a dusty environment, and is usually a better data reservoir. The unit also provides one half-size PCI card as an expansion slot.

2-10

ORDERING INFORMATION

SPECIFICATIONS

PPC-5170

PPC-515017" TFT LCD P4 Panel PC

15" TFT LCD P4 Panel PC

■ CPU: Socket-478 base support Intel Pentium 4 / Celeron™ up to 533 MHz FSB■ Aluminum front panel meets NEMA 4 / IP65 standard■ High brightness TFT LCD – Resolution: 1024 x 768(PPC-5150), 1280 x 1024(PPC-5170) – Brightness: 250cd/m2

– LCD MTBF: 50,000 hours – Backlight MTBF: 30000 hrs (PPC-5150), 50,000 hrs (PPC-5170)■ Drive Bays: 1 x 3.5" Slim FDD , 1 x Slim CD-ROM , 2 x 2.5" HDD■ Accepts one half-size PCI add-on card■ Equipped with cooling fan■ Standard Power Supply: UPF200-AA 200W Industrial ATX with PFC Power Supply(+5V@21A, +12A@10A, +3.3V@14A, [email protected],[email protected], +5V@2A )■ Operating Temp.: 0~50oC■ Vibration: 5-17Hz, 0.1" double amplitude displacement 17~640 Hz,1.5G acceleration peak to peak■ Shock: 10G acceleration peak to peak (11ms)■ Color: White (Pantone 413C), Dark Blue (Pantone 433C)■ Optional Resistive and Capacitive Touch Screen■ Dimension: 452mm(W)x 356mm(H)x 108.6mm(D) (PPC-5170) 410mm(W)x 309mm(H)x 102.4mm(D) (PPC-5150)■ Net/GW: 8/12(kg)(PPC-5150), 10/14(kg)(PPC-5170)

Dimensions : (PPC-5170)

Option: ARM-31 - Loading capacity from 7 to 14kgs RK-150, RK-170: Rackmount kit

C : Color Code D : Dark Blue (Pantone 433C) W : White (Pantone 413C)

Dimensions : (PPC-5150)

NEW

Accept One half size PCI-add-on card

Slim FDD

Slim CD-ROM

■ PPC-5170 C - AL

■ PPC-5150 C - AL

SBC Touch ScreenModel

POS-478

POS-478

T-R170B, T-C170B

T-R151B, T-C151

POS-478Socket-478 Base Full Function POS Board With LCD/CRT VGA, LAN,GbE, USB2.0, 1394, Audio

Analog VGAInput

Protected against jets of water from all directions

Protected against dust (no harmful deposit)

PentiumPentium® 4 4

FSB 533 Panel PC FSB 533 Panel PC

Pentium® 4

FSB 533 Panel PC

2-11

Pentium® 4 Panel PC System – NOW available

ORDERING INFORMATION

MPC-50A/52A/55A/57A 10.4"/ 12.1"/ 15"/ 17"

Industrial Panel PC

SPECIFICATIONS

MODEL Power Supply Touch Screen

MPC-50AW

MPC-52AW-R2

MPC-55AW-AL

MPC-57AW-AL

T-R104B

T-R121B

ACE-832AP

T-R151BT-C151

T-R170BT-C170B

ACE-816APACE-916AP

Dimensions : (MPC-50A) Dimensions : (MPC-52A)

■ Front panel meets IP65/ NEMA 4 standard

■ Optional 3M resistive and capacitive type touch screen with RS-232 interface■ Operating temperature : 0oC ~ 50oC■ Vibration: 5~17Hz, 0.1" double amplitude displacement 17~640 Hz, 1.5G acceleration peak to peak ■ Shock: 10G acceleration peak to peak (11ms)■ Color: White (Pantone 413C)

Removable 3.5" HDD Drive Bayfor MPC-55A/ 57A

Analog VGA input with OSD function!

OSD (ON Screen Display) Control Keys

MPC-50A

MPC-52A

Dimensions : (MPC-55A)Dimensions : (MPC-57A)

The smart design makes maintenance a much easier job

MPC-55A/57ASupport Full size SBC

Support Half size SBC

Support Half size SBC

PS/2 Type PSU

Display Type

Max. Resolution

HDD Drive Bay

FDD Drive Bay

CD-ROM Drive Bay

Slot

Cooling Fan

Power Supply

Optional

Backplane

1 x 8cm ball bearing cooling fan

ACE-816AP / 916AP

15" TFT LCD

1024 x 768

2 x 3.5" removable for IDE

1 x 12cm ball bearing cooling fan

ACE-832AP

PCI-7S, IP-7S

PCIAGP-6S(R)

12.1" TFT LCD

800 x 600

1 x 3.5" internal

1 x 3.5"

1 x 5.25"

6

IP-6S, BP-6S,

IP-6SA

17" TFT LCD

1280 x 1024

Products MPC-50A MPC-52A-R2 MPC-55A MPC-57A

(for half size card only) (Full-size card availalde)

1 x 3.5"

1 x slim type

7

10.4" TFT LCD

800 x 600

2 x 3.5" internal

1 x 3.5"

1 x slim type

4 (for half size card only)

BP-4S, IP-4S, IP-4S2, IP-4S3,

IP-4SA

NEW

MPC-5X series feature a highly expandable Panel PC product line with multiple choices of display size, HDD drive bay, CD-ROM drive bay, the number of slots, and backplanes (ref. specification table). The smart design of chassis and removable HDD drive bay makes the maintenance of the whole system much easier than before. Both resisitive and capacitive touch screens are provisional. The equipped analog VGA input function gives users the ease of using LCD panel without the concern of VGA card type.

10.4"/ 12.1"/ 15"/ 17" TFT LCD Industrial Panel PC

Front Panel Plastic Plastic Aluminum Aluminum

2-13

ETX Series

Fitting Solution for Embedded Application

It occurs a lot that a CPU board doesn’t meet industrial PC- based applications, due to unsuitable board size, improper connectors’ location or missing functions. The only alternative solution was to develop a completely new design, which is expensive and very time-consuming. Now, IEI presents to you FSEA (Fitting Solution for Embedded Application) which is based on the open standard of ETX technology and designed by JUMPtec.

ETX Advantages

Best choice for Embedded Solutions

NEW

Basic Concept of IEI FSEA

ETX CPU MODULE

ETX Baseboard

In order to enhance the reliability and flexibility of ETX solutions, IEI moves the Ethernet interface from the CPU module to the baseboard. Testing performance reveals that IEI's innovative design produces outstanding results.

M (ETX CPU Module) + N (ETX Baseboard) M x N Products

DIMENSIONS

ETX Module Architecture

ETX Module

ETX Baseboard: 3.5", 5.25", Half-Size, Full size, ATX

I / O Connector, Expansion slots, etc.

CPUIntel Pentium III(Transmeta, VIA C3/Eden,NS GX1,etc)

Core LogicNB/SB, GMCH/ICH, Graphics, Audio, SSD, USB/LPT/Serial/IrD, SO-DIMM,IDE, etc

Connector X1PCI, USB,

Audio

Connector X2ISA Bus

Connector X3COM,LCD,

CRT

Connector X4IDE, Network

1394 Wireles PCMCIA Bridges Network

– ETX architecture is widely used– Minimum engineering & evaluation cost sangs & reduced business risks– Faster time-to-market– The systems are scalable by just upgrading the CPU module– Flexible customer solution board design

ETX modules are scaleable and interchangeable. Thus with a single baseboard, several products can be launched in the same time by the aid of a wide choice of CPU modules.

Digital Content Preview KIOSK Portable Instrument Computers Human Machine Interface Products Point Of Sale (POS) Home Automation Multimedia Entertainment Security Control Terminator Transportation Operation Console

APPLICATIONS

side viewwithout heatsink

top view

3

111

114

2.5

92.595+0-0.2

111.6

2.4

7.5 11.7

41.745.9

53.3

87.5

X1

X2X4

X3

�: Location peg 1.0 0.5mm

�: Location peg 0.7 0.5mm

1.6

2.8max. 2

heatspreader

8

All dimensions without tolerance 0.2mm

2.5

ETX, Embedded Technology Extended, is a new architecture for industrial applictions. It fulfills the requirements for embedded technology by a compact module of most PC functions:

ETX divides a complete motherboard system into two parts physically:

– ETX MODULE - as small as 4.5” x 4” size, carries CPU system and core ASICs

– BASEBOARD – including all I/O connectors, plus some supplementary functions.

3-1

ETX SeriesIEI ETX CPU Module Series

ETX-GX-300 NS GX1-300MHz ETX CPU ModuleETX-5800-733 Transmeta TM5800 733MHz ETX CPU ModuleETX-EDEN-400 VIA EDEN 400MHz ETX CPU Module

ETX-GX-300 ETX-5800-733 ETX-EDEN-400

Heat sink

Note: For further information about customization Transmeta CPU TM5800 733/867/933 MHz and VIA EDEN CPU, please contact us.

MODELS ETX-GX-300 ETX-5800-733 ETX-EDEN-400Processor NS Geode GX1 300MHz Transmeta TM5800 733MHz VIA EDEN 400MHz

Chipset NS CS5530A VIA VT82C686B VIA VT8606/VT82C686B

rC&T

Graphic Controlle

On-Chip VGA 69030 On-Chip VGA

Graphic Memory

Shared system memory4MB Max.

4MB RAM on chip Shared system memory32MB Max.

LCD Interface

18-bit Single Channel LVDS 36-bit Dual Channel LVDS 36-bit Dual Channel LVDS

DRAM Slot 1x 144-pin SO-DIMM support

up to 512MB1x 144-pin SO-DIMM support

up to 512MB1x 144-pin SO-DIMM support

up to 512MB

I/O Interface

2x IDE ATA-331x LPT/FDD2x RS-2322x USB 1.11x PS/2

2x IDE ATA-1001x LPT/FDD2x RS-2324x USB 1.11x PS/2

2x IDE ATA-1001x LPT/FDD2x RS-2324x USB 1.11x PS/2

Audio AC' 97 Codec AC' 97 Codec AC' 97 Codec

WDT Software Programmable 1~255 sec. System reset

Software Programmable 1~255 sec. System reset

Software Programmable 1~255 sec. System reset

Power

ManagementAPM ACPI ACPI

nPowerConsumptio

[email protected]; [email protected](NS GX1-300MHz 128MB SO-DIMM)

[email protected]; [email protected](TM-5800-733MHz 128MB SO-DIMM)

[email protected]; 5VSB@250mA(VIAVIVI EDEN-400MHz 128MB SO-DIMM)

Operation Temp.

0~60°C 0~60°C 0~60°C

Relative Humidity

0~95%, Non-Condensing 0~95%, Non-Condensing 0~95%, Non-Condensing

ETX modules can be utilized as components by plugging into an application-specific baseboard and putting the core CPU and subsystems together with sound, SVGA, Ethernet and additional I/O. The module connects to the rest of the embedded system through high-density, low profile SMT connectors, which carry both ISA and PCI bus signals as well as dedicated I/O interfaces. The mechanics of the interconnection of an ETX/baseboard system is physically the same height as a one-board solution. ETX modules are interchangeable, allowing system designs to be scaleable.

Unique design of LAN placement:In order to avoid any unwantedinterruptions, IEI places the LAN function on the baseboard, in order to provide better performance and reliability. Therefore, the chip and transformer won't be affected by noise signals in communication. Ordering Information

IEI ETX CPU Module

18-bit Single Channel LVDS

3-2

2-1

ETX Series

IEI ETX Baseboard

Module

CPU Module

Interface

LCD Connector

Slot

Extension Slot

Ethernet Chip

SSD

Audio

Ethernet Connector

RS232

RS232422/485

KB/MS

LPT

VGA

USB

IDE Connector

Floppy

DOC

DIO

IR connector

Capture Chip

Video Capture

Connector

ETX Form Factor

1 x 30-pin DFP

for LVDS

2 x PCI, 1 x ISA

Realtek 8100BL

N/AAC'97

1 x RJ-452

N/A211421

N/A4 inputs, 4 outputs

5 pin-headerN/A

N/A

ETX Form Factor

1 x 20-pin 24bit DFP for LVDS1 x 30-pin 48bit DFP for LVDS

1 x44-pin for 24bit TTL1 x 44-pin for 18bit TTL

4 x PCI, 3 x ISA

Realtek 8100BL

CompactFlash Type II socketAC'97

1x RJ-45312214211

4 inputs, 4 outputs5 pin-header

N/A

N/A

ETX Form factor

1 x 20-pin 36bit DFP for LVDS

1 x PCI

2 x Intel 82559

CompactFlash Type II socket

C-Media (CMI 8738)2x RJ-45

1 (TX,RX only)11

N/A122

N/AN/A

4 inputs, 4 outputsN/A

4 x BT878A

4 x BNC connector

ETX-DB-ATXRETX-DB-7SR ETX-DB-DVR1

ORDERING INFOMATION

ETX-DB-7SR ATX Size 7 Slots ETX Baseboard with Realtek 8100BL LANETX-DB-ATXR ETX Evaluation Baseboard with Realtek 8100BL LANETX-DB-DVR1 ETX DVR Baseboard with Dual Intel® 82559 LAN

ETX-DB-7SR

Full Function ETX Baseboard with LCD/CRT VGA,Audio, DOC, CF II & D I/O

ETX-DB-ATXR

ETX Evaluation Baseboard with LCD/CRT VGA, LAN, Audio & D I/O

IEI ETX Baseboard series

ETX Baseboard with 4 Capture EngineCF II, Dual LAN, Audio & D I/O

ETX-DB-DVR1

IEI ETX Customization Flow

Specification Confirmed

System Quality Test

3-3

■ JUKI-EDEN-400N VIA EDEN 400MHz Dual Intel 82551 LAN, USB, PC/104 & D I/O■ JUKI-EDEN-400R VIA EDEN 400MHz Dual RTL8100BL LAN, USB, PC/104 & D I/O■ JUKI-C3-1GN VIA C3 1GHz Dual Intel 82551 LAN, USB, PC/104 & D I/O■ JUKI-C3-1GR VIA C3 1GHz Dual RTL8100BL LAN, USB, PC/104 & D I/O

SPECIFICATIONS

ORDERING INFORMATION

JUKI-EDEN-400JUKI-C3-1G

PCISA Bus VIA EDEN/C3 CPU, LCD/CRT VGA,

Dual LAN, USB, PC/104 & D I/O

■ CPU: Embedded low power consumption VIA Eden/C3 CPU (EBGA package)■ System chipset: VIA VT8606T (PN133T) with VT82C686B■ System memory: 1xSO-DIMM socket support up to 512MB■ Display: – On-chip ProSavage™ VGA controller – Bus: AGP 4x – V-RAM: Shared with system memory up to 32MB (SMA technology) – Resolution: 1920 x 1440 single display – Connector: DB-15 for CRT display – LCD: 1 x 20-pin connector 36-bit Dual channel for LVDS and 1 x 50-pin by pin-header for TTL■ SSD: 1x onboard Compact Flash™ type II socket■ Ethernet: – 2x onboard 10/100bps Intel 82551/RTL8100BL fast Ethernet controller■ I/O: – 4 x RS-232 serial ports by pin header – 1 x LPT parallel port by pin header (Supports SPP/EPP/ECP mode) – 1 x IrDA (SIR mode) – 3 x USB 2.0 and 2 x USB 1.1 by pin header – 2 x ATA/100 IDE channel, supports CD-ROM, ZIP and LS-120 drive bootable (IDE1: 40-pin, IDE2: 44-pin) – 1 x PS/2 for Keyboard/Mouse – 1 x FDD connector, support 1.44/2.88MB and 3-mode floppy drive■ Audio: AC'97 Codec■ WDT: Software programmable supports 1~255 seconds system reset■ PC/104: Expansion connector■ Digital I/O: TTL Level 4 - input and 4 - output■ Hardware Monitoring: VT82C 686B (Provides CPU Vcore, Vcc; CPU/System fan speed

and temperature detecting function)■ ATX power control function: Meets ACPI 1.1 specification■ Power Consumption: [email protected]; (VIA EDEN 400MHz 256MB SDRAM)■ Operating Temperature: 0~60°C■ Relative Humidity: 5~95%, non-condensingNote: For optional RS-232/422/485 serial port, please contact supplier

Watch DOG TimerThe Watch Dog Timer (WDT) is a special hardware device designed to monitor the computer system whether functioning normally. It also offers some measures to fix the system. IEI provides software development kir for timing application configurations. When time is up, WDT will send Reset signal to system for hardware reboot. Operator can tune counting value into WDT Configuration Register (write the control value to the Configuration Port), and clear WDT counter (read the Configuration Port).

Dimensions

0

0

23.2

9

157.

4

184.

99

25.4

8

105.

49

28.0

2

101.

68

122.38

100.97

8.05

24.74

42.27

56.64

80.58

15.2415.24

Watch Dog Timer

AP

System

Counting Refresh

Time-OutReset Signal

NEW

Half-Size All-in-OneHalf-Size All-in-One

Low Power ConsumptionLow Power ConsumptionHalf-Size All-in-OneHalf-Size All-in-One

Low Power ConsumptionLow Power ConsumptionHalf-Size All-in-One

Low Power Consumption

PCISA BusIt is combines both ISA and PCI bus signals into a single edge connector. PCISA backplanes allow addition of both ISA and PCI add-on cards. Half-Size SBC is mostly applied in compact and rugged enclosure, suied for on the factory floor standalone controller ot other applications in harsh environments.

4xRS-232Serial Ports

3-20

Supports TTL Display

Supports LVDS Display

VGA

4 COM ports

USB 2.0

Dual LAN

PC/104

PS/2 Keyboard/Mouse

SPECIFICATIONS

ORDERING INFORMATION

NOVA-88905.25" Embedded Socket-478 CPU Board with

LCD/CRT VGA,LAN,GbE,USB2.0,1394 & Serial ATA

■ CPU: Socket-478 base support Intel® Pentium® 4/ Celeron™ up to 533 MHz FSB■ System Chipset: Intel 845G/ GV + ICH4 (support Hyper-Threading Technology)■ System Memory: One PC1600/ PC 2100 (200/ 266MHz) DDR SDRAM maximum up to 1GB■ Display: – VGA chip: Integrated in 845G/ GV chipset

– LCD controller: NS DS90C2501 supports up to 1400x1050 resolution, 24/48-bit TFT LCD– V-RAM: shared with system memory (DVMT technology)– CRT Resolution: Supports up to 2048x1536 36-bit color display– Connector: DF14-30F for 48-bit Dual channel LVDS, DB-15 for CRT display

■ Ethernet: 1x10/100 Mbps Ethernet onboard i82562ET (NOVA-8890, NOVA-8890SF) 1x10/100 Mbps Ethernet onboard i82562ET and 1 x Gigabit Ethernet onboard i82540 (NOVA-8890SFG)■ SSD: One Compact Flash Type II socket■ IEEE-1394: 2 x IEEE-1394a 400Mbps by pin-header (TI TSB43AB22) ■ I/O: – 3 x RS-232 – 1 x RS-232/422/485 selectable port with Auto-Direction function – 4 x USB 2.0 – 1 x LPT

– 1 x FDD channel support 1.44/ 2.88MB and 3-mode– 2 x ATA-100 IDE channel (1 x 40-pin, 1 x 44-pin)– 2 x Serial-ATA parallel to serial (optional)

■ Audio: AC' 97 Codec ■ Digital I/O: TTL Level, 4 inputs and 4 outputs■ WDT: Software programmable support 1~255 second system reset■ Expansion slot: 1 x PCI slot, 1 x PC104+ (Only PCI)■ Hardware monitoring: Provides CPU Vcore, Vcc, CPU/ System fan speed and

temperature detecting function. ■ Power Supply Input: 4-pin power housing (5.25" Drive Connector)■ Power Consumption: +5V@ 4.2A ; [email protected] (P4 2.4 Ghz/512K cache)■ Operating Temperature: 0~60oC ■ Relative Humidity: 5~95%, non-condensing

■ NOVA-8890 5.25" Embedded Socket-478 CPU Board with LCD/CRT VGA, LAN, USB2.0■ NOVA-8890SF 5.25" Embedded Socket-478 CPU Board with LCD/CRT VGA, LAN, USB2.0, 1394 and Serial ATA■ NOVA-8890SFG5.25" Embedded Socket-478 CPU Board with LCD/CRT VGA, LAN, GbE, USB2.0, 1394 and Serial ATA

■ CF-512 CPU cooling fan Supports P4 CPU up to 2.5GHz ■ CF-513CPU cooling fan Supports P4 CPU up to 3.06GHz

CF-512High performance cooling fan

CF-512High performance cooling fan

Serial- ATAThe Serial ATA specification is designed to overcome these design limitations while enabling the storage interface to scale with the growing media rate demands of PC platforms. Serial ATA is to replace parallel ATA with the compatibility with existing operating systems and drivers, adding performance headroom for years to come. It reduces voltage and pin count requirements and can be implemented with thin and easy to route cables. Moreover, Serial ATA provides you an even faster transfer rate of 150 Mbytes/second. The speed will be doubled in the next generation of Serial ATA interface.

Parallel ATA Serial ATA

Bandwidth

Volts

Pins

Length Limitation Cable

Ventilation

Peer-to-Peer

100/133 MB/Secs

5V

40

18 inch (45.72cm)

Wide

Bad

No

150/300/600 MB/Secs

250mV

7

1 meter (100cm)

Thin

Good

Yes

Benefits of Serial ATASerial ATA offers a number of benefits over Parallel ATA, including:

■ Reductions in voltage and pin count ■ Smaller, easier-to-route cables; elimination of the cable-length limitation

■ Improved data robustness ■ Backward compatible

IDESerial-ATA(optional)

10/100 Mbps LAN

GbE LAN

USB

Intel 82540LAN Controller

Equipped with two serial-ATA cables setsfor NOVA-8890S series

COMLVDS InterfaceATX 12V

LPT

Intel®845GV ICH4Supports Intel Pentium 4/ Celeron up to 533 MHz FSB

Serial USB 2.0(Ordered seperately)

NEW

PC/104 Plus

CF-513

Supports Hyper- Threading Technology

Supports Hyper- Threading Technology

Supports Hyper- Threading Technology

Supports Hyper- Threading Technology

Supports Hyper- Threading Technology

Copper base high performane cooling fan(Ordered seperately)

3-24

SPECIFICATIONS

3.5" VIA Eden CPU Embedded Board

with LCD/CRT VGA, LAN, and AudioWAFER-E668EV/E669E2V

VIA VT8601T & VT8606

■ WAFER-E668EV VIA Eden 667MHz CPU Embedded Board with LCD/CRT VGA, LAN, Audio and D I/O■ WAFER-E668EV-733 VIA Eden 733MHz CPU Embedded Board with LCD/CRT VGA, LAN, Audio and D I/O■ WAFER-E669E2VR-400 VIA Eden 400MHz CPU Embedded Board with LCD/CRT VGA, D I/O and Dual Realtek RTL8100B LAN■ WAFER-E669E2VN-400 VIA Eden 400MHz CPU Embedded Board with LCD/CRT VGA, D I/O and Dual Intel i82551 LAN

ORDERING INFORMATION

NEW

WAFER-E668EVWAFER-E669E2V

WAFER-E668EV WAFER-E669E2V

VT8601T Apollo PLE133T VT8606 TwisterT

PCI North Bridge support 66/100/133 MHz

SMA North Bridge

support 66/100/133 MHz

VIA C3, Intel Celeron/Pentium III,

Pentium-M (Tualatin)

VIA C3, Intel Celeron/Pentium III

(Tualatin)

64bits Single Cycle 2D/3D Graphic

Accelerator

Super-pipelined 128bits 2D/3D S3

Savage 4, AGP 4X

System memory 8M System Memory 32MB

Chipset

Front Side Bus

Support CPU Type

VGA Controller

Share Memory MAX.

CPU

System Chipset

LCD Display

CRT Display

Ethernet

SSD

I/O

Audio

Expansion Slot

Digital I/O

E2Key

WDTPower

Consumption

Operation Temperature

Relative Humidity

Embedded VIA Eden 667/733MHz CPU

VIA 8606 + 8231

LCD: Integrated in VIA VT8606I/F: 36-bit TTL

Connector: 50 pin-header

CRT: Up to 1920 x 1440

Connector: DB-15

1 x 10/100Mbps Fast Ethernet(VIA 8231 Chipset integrated + VT6103 PHY)

No

2 x RS232

1 x RS232/422/485

2 x USB1.1

1 x FDD

1 x IDE ATA-100

1 x LPT

1 x IrDA

1 x PS/2 for Keyboard/Mouse

AC’97 Codec

No

4pin-in; 4pin-out

No

Software programmable 1~255 sec

12V@500mA; [email protected]

(Eden 667MHz/128M SDRAM)

0~60oC

5~95%, non-condensing

Embedded VIA Eden 400MHz CPU

VIA 8601T+ 686B

LCD: Integrated in VIA 8601 I/F: 24-bit TTL

Connector: 50 pin-header

CRT: Up to 1600 x 1200

Connector: DB-15

2 x 10/100Mbps Fast Ethernet(Realtek8100B/Intel 82551)

CompactFlash™ Type II socket

1 x RS232

1 x RS232/422/485

2 x USB2.0

1 x FDD

1 x IDE ATA-100

1 x LPT

1 x IrDA

1 x PS/2 for Keyboard/Mouse

AC’97 Codec

1 x PC/104

4pin-in; 4pin-out

Yes

Software programmable 1~255 sec

12V@40mA; 5V@3 A

(Eden 667MHz/128M SDRAM)

0~60oC

5~95%, non-condensing

Dimensions:

LAN USB KeyboardCOM CRTDual LAN USB 2.0COM CRT

3-39

SPECIFICATIONS

ORDERING INFORMATION

POS-478Socket-478 base Full Function POS

LCD/CRT VGA, LAN, GbE, Serial ATA, 1394

■ CPU : Socket-478 base support Intel® Pentium® 4/ Celeron™ up to 533MHz FSB■ System Chipset : Intel® 845G/GV + ICH4(support Hyper-Threading P4)■ System Memory : 2 x PC-1600/PC-2100(200/266MHz) DDR SDRAM, maximum up to 2GB■ Display: – VGA chip: Integrated in 845G/ GV chipset

– LCD controller: NS DS90C2501 supports up to 1400x1050 resolution, 24/48-bit TFT LCD– V-RAM: shared with system memory (DVMT technology)– CRT Resolution: Supports up to 2048x1536 36-bit color display– Connector: DF14-30F for 48-bit Dual channel LVDS, DB-15 for CRT display

■ SSD: One Compact Flash™ type II socket■ Ethernet : 1 x onboard 10/100Mbps Ethernet 1 x 10/100/1000Mbps Ethernet (Intel 82540)■ Audio : AC '97 Codec, 6W Amplify (supports line-in, line-out, mic-in and speak-out)■ I/O : – 3 x RS232 serial port – 1 x RS232/RS422/485 selectable port – 2 x LPT parallel ports – 6 x USB 2.0 ports – 2 x ATA-133 IDE channel – 2 x Serial-ATA( Silicon Image SIL3112), equipped with 2 Serial-ATA cables support RAID 0 (Striping) and RAID 1 (Mirroring) with Silicon Image Medley-software RAID. (optional) – 1 x FDD port■ IEEE-1394: 2 x IEEE-1394a 400Mbps ports (TI TSB43AA22)■ Digital I/O : TTL Level, 4 x inputs and 4 x outputs■ Extension Slot : 1 x 32-bit PCI slot■ WDT: Software programmable supports 1~255 sec system reset■ Support ATX function■ Power Consumption : [email protected], +12V@7A (P4 2GHz /1GB DDR SDRAM)■ Operating Temperature : 0~60oC■ Relative Humidity : 5~95%, non-condensing

485

■ POS-478 Socket-478 base full function POS board ■ POS-478S Socket-478 base full function POS board with Serial-ATA■ CF-510 Intel P4 CPU cooler ■ CF-512 CPU cooling fan support P4 CPU up to 2.5 GHz■ CF-513 CPU cooling fan support P4 CPU up to 3.06 GHz

What are the differences between USB and IEEE-1394?

USB & IEEE 1394 Interface Comparison Table

Interface

Speed

Connecter Device Supported

Plug & Play

Main Peripheral Devices

USB1.1

12Mb/s

127

Yes

KeyboardMouseModemPrinterScannerDSC

IEEE1394.a

400Mb/s

63

Yes

DV HDHDTVCD-R/RWDVD-ROM

USB2.0

480Mb/s

127

Yes

As USB1.1

Serial

NEW

USB 2.0

USB

1394

COMAudio

VGA

LAN / Giga LAN

Keyboard / Mouse PCI

Printer

FSB 533 DDR 266

Dimensions:

The CF-510 is designed for Intel® standard Pentium 4 CPU cooler which is an aluminum heat sink with fan . Rather than a flat lump of metal, heat sinks are designed with hills and valleys in order to provide more surface area to make contact with the air. However, the heat dispersion capability is different due to the inheritance of natural material between aluminum and cooper. CF-512 is more suitable for critical scale of embedded appliance. Within its superior thermally conductive material, revolutionary shape design and high performance compact size benefits, LCD/Panel PCs, Industrial PCs and 1U server can be the good example of the application. CF-513 is capable of supporting up to P4 3.06GHz CPU.

CF-513 Copper base high performance cooling fan(Ordered seperately)

Supports Hyper- Threading Technology

Supports Hyper- Threading Technology

Supports Hyper- Threading Technology

Supports Hyper- Threading Technology

Supports Hyper- Threading Technology

CF-512High performance cooling fan(Ordered seperately)

CF-510Intel standard P4 cooler(Ordered seperately)

Serial-ATACable sets

3-45

SPECIFICATIONS

ORDERING INFORMATION

POS-EDEN-400 Embedded Low Power VIA Eden CPU

Full Function Board

■�CPU : Embedded lower power consumption VIA Eden 400MHz CPU■�System Chipset : VIA VT8606T(PN133T) with VT82C686B ■�System Memory : 1 x DIMM slot + optional on board 64MB SDRAM■�Display: — On-chip ProSavage“ VGA controller���� — Bus: AGP 4x, 66MHz���� — V-RAM: Share with system memory up to 32MB(SMA technology)���� — Resolution: Up to 1600X1200 (UXGA)���� — Connector:DB-15 for CRT display���� — 36-bit LVDS ■�SSD: — 1X Compact Flash“ Type II socket■�Ethernet : 1 x 10/100Mbps Realtek RTL8100BL Fast Ethernet Controller■�Audio : AC’97 (VIA 1612A) with 0.25W amplifer�■�I/O :� — VT82C686B + Winbond 83877��� — 3x RS-232 port��� — 1x RS-232/422/485 ports��� — 2x Parallel port��� — 4x USB 1.1��� — 1x IrDA (SIR Mode)��� — 1x FDD��� — 2x ATA-100 IDE channel (40-pin/44-pin header)��� — 1x PS/2 Keyboard/Mouse■�Digital I/O : 4X Input and 4X Output TTL Level■�Extension Slot : 1X PCISA (PCI+ISA)■�WDT: Software programmable supports 1~255 sec. system reset■�Power Consumption : [email protected], +12V@260mA,-12V@110mA,� +5VSB@150mA (Eden 400MHz; CPU/128MB SDRAM; IBM 30GB HDD)■�Operating Temperature : 0~60oC (CPU cooler required)■�Relative Humidity : 5~95%, non-condensing

■�POS-EDEN-400 Embedded VIA Eden 400MHz full function board■�POS-EDEN-400-64MB Embedded VIA Eden 400MHz with 64MB ��� on board SDRAM full function boardNote: For other kinds of on board memory and TV-Out funcion, �� please contact our supplier

Dimensions:

PC DISPLAY MODES

Required Display Memory (MB)

NEW

The primary screen resolutions are 640x480, 800x600, 1,024x768 and 1,280x1,024. At higher resolutions, the image is more visible, but the text and images appear smaller. On small monitors, 640x480 and 800x600 are used. On 17" monitors, 1,024x768 is common, and 1,280x1,024 and higher are used on monitors 19" and above. It all depends on your eyesight. Display adapters may provide a 1,600x1,200 mode and even higher resolutions for medical and other demanding applications. In order to use the highest mode of the card, the monitor must be able to support that resolution.

0.5

0.5

1

1

1

2

0.5

1

1

2

2

2

1

2

2

2

4

4

2

2

4

4

4

8

16(4bit)Resolution 256(8bit) 65K(16bit) 16M(24bit)

640X480

800X600

1024X768

1152X870

1280X1024

1600X1200

USB COM

VGA

10/100 Mbps Ethernet

Printer Optional On Board 64 MB SDRAM

Low Power Consumption

& Fanless SolutionLow Power Consumption

& Fanless SolutionLow Power Consumption

& Fanless SolutionLow Power Consumption

& Fanless SolutionLow Power Consumption

& Fanless Solution

Compact Flash at Solder SidePrinter

FanlessFanlessFanless

3-47

Rackmount Internet Security Platform

with 6 Ethernet Ports and LCD Display

■ Rackmount Internet Security Platform with 6 Ethernet Ports and LCD Display

■ Rackmount Internet Security Platform with 6 Ethernet Ports

SPECIFICATIONS

FWAP-3680L

ORDERING INFORMATION

NEW

FWAP-3680L is a powerful and robust Firewall/VPN computing platform designed for application developers, system integrators and service providers for easy system management, maintenance and diagnostics. In addition to its small space occupation and all-round functions for Internet security, FWAP-3680L also enables flexible customization of the front panel with its removable design. Users from SMB (Small Medium Business Segments) to enterprises can simply apply FWAP-3680L to their business and enjoy all benefits of the security platform.

■ CPU: Supports Intel® Tualatin Socket-370 Pentium / Celeron™ 133MHz FSB ■ System Chipset: Intel 815E-B step■ System Memory: 2 x DIMM up to 512MB (PC100/PC133)■ Drive Bay: One 2.5" HDD drive bay with anti-vibration drive kit meet MIL-STD-810F 514.5C-1 qualified standard ■ Management: Console on the front panel■ FWAP-3680L supports one A125 16x2 characters LCD display module with RS-232 interface■ Embedded NOVA-7898 single board computer■ IDE: Two ATA-100 channel 1x40 pin header for IDE Flash disk, 1x44 pin header for 2.5" HDD ■ Ethernet: External RJ-45 x 6, socket PCI add-on LAN module supports system up to 6 LAN ports. Standard equipped with dual Intel 10/100 Mbps LAN controllers onboard Up to 6x LAN with LAN module daughter board, LM-102R (Dual Realtek 8100), LM-102N (Dual i82559/i82550), LM-2G (Dual Broadcom 5701/5703 Gigabit chip)■ Ship with rackmount kit■ WDT: Software programmable, support 1~ 255 sec. system reset■ Power Supply: Equipped with ACE-816APS (with PFC) 150W industrial power supply■ Optional DC power supply ACE-815T and ACE-815C■ Ship with CF-507 high performance cooling fan■ Vibration: 5 ~ 17Hz, 0.1" double amplitude displacement 17 ~ 640Hz, 1.5G acceleration peak to peak■ Shock: 10G acceleration peak to peak (11ms)■ Operation Temperature: 0 ~ 50oC■ Color: Dark Blue (Pantone 433C)■ Dimensions: 431(W)x44(H)x250(D)mm■ Default built-in two 10/100Mbps LAN ports

■ LM module (Socket PCI connector) LM-102N-x59 Dual i82559 LAN Module LM-102R Dual Realtek 8100 LAN Module LM-2G Dual Broadcom 5701/5703 Gigabit LAN Module

Main Features

■ Flexible Customization Front Panel The removable front panel and cover make hardware customization easier. Design to be very easy to customize printing, color and even company logo.■ Programmable LCD Display Module Make users easily monitor the system status by checking out the LCD panel. Allows page message editing and auto flashing■ Expendable Socket-PCI LAN Modules offering two socket PCI add-on LAN module, the system can support up to 6 LAN ports, either 10/100Mbps Ethernet (LM-102N-x59, LM-102R) or Gigabit Ethernet (LM-2G) on various applications■ Support DC power supply and 2.5" HDD anti-vibration kit for mobile operation scenarios■ High processing performance and low power consumption features of Intel Pentium III/ Celeron processor to meet the needs of high-demanding Internet Appliances. ■ Console port for local setting

ACE-816APSACE-815TACE-815C

FWAP-3680L /

ACE-816APSACE-815TACE-815C

FWAP-3680 /

The changeable front panel and cover make easier hardware customization

Expendable two Socket-PCI for add-on LAN module

One 2.5" HDD drive bay with anti-vibration drive kit

Ship with CF-507 cooler

Two Socket PCI

High performance 150W power supply with PFC function (Optional DC version)

Programmable LCD Display ModuleFWAP-3680L

LM-102R LM-102N LM-2G

OEM Project Welcome!OEM Project Welcome!OEM Project Welcome!OEM Project Welcome!OEM Project Welcome!

4-1

SPECIFICATIONS■ Desktop or wall mount, equipped with wall mount kit■ One 8cm-cooling fan with removable filter■ Accept two half-size PCI add-on card■ Equipped with ACE-810V power supply (12V DC Input, 100W power supply or ACE-818C power supply (24V DC Input, 140W power supply)■ Also available with ACE-720APM mechical class 200W AC input ATX power supply, no power battery support ■ Option power battery (BM-12V : 3000mAH, BM-24V : 2000mAH) Disk Drive Bay: ■ 2 X 2.5” internal HDD Drive bays with best anti-vibration design Meets MIL-STD-810F 514.5C-1 standard ■ 1 X 3.5” FDD Drive bayMain Board (CP800/ CC400):■ CPU: Intel low power PIII 800MHz or ultra low power Celeron 400MHz Package type: 478-Pin Micro FC-BGA2 (mounted on board)■ System Chipset: Intel 815E + ICH2, PCI 2.2 compliant■ System Memory: On board 256MB SDRAM and one PC100/133 SO-DIMM slot up to 512MB■ Display: - Build-in FW82815 chip - V-RAM: Shared with system memory (DVMT technology) - Resolution: Up to 1600x 1200, 8 bit color - Connector: DB-15 for CRT display■ Two ATA-33 IDE RAID channel (Promise PDC 20267)■ SSD: Compact Flash type II socket on board■ WDT function: Software programmable support 1~255 second system reset■ Hardware Monitoring (CPU Vcore; Vcc; CPU/System Fan speed and thermal)I/O Connectors (Front Side):■ PCMICA: Cardbus interface support type I/II/III (Ricoh R54C476II)I/O Connectors (Rear Side): ■ Six D-Sub9 connector for RS-232■ One D-Sub25 for LPT■ One D-Sub15 for CRT VGA output■ Two PS/2 for keyboard and mouse■ One RJ-45 for Intel 82540 Gigabit Ethernet ■ Two USB 2.0■ 36 pin connector for extension IDE device■ Audio (Lin-in, Lin-out, Mic-in) C-media 5.1 Channel PCI hardware sound, 6W Amplifier ■ Four video capture inputs with BNC connector - Chip: Conexant Fusion 878A chip (Muitplexed function) - Frame speed: 30 FPS - Video Format: NTSC/ PAL/ SECAMEnvironment:■ Vibration: 5~17Hz, 0.1”double amplitude displacement 17~640 Hz, 1.5G acceleration part to part ■ Shock: 10G acceleration part to part (11ms) ■ Operating Temp : 0~50o C■ Color: Black (Pantone Black C)■ Dimension: 270mm(W) x 130mm(H) x 280mm(D)

NEW

ORDERING INFORMATION

CPC-1201

Note: CP800: Low Power Pentium® III 800MHz

CC400: Ultra Low Power Celern® 400MHz

Optional :BM-12V : Battary module for 12V DC input system, 3000mAH BM-24V : Battary module for 24V DC input system, 2000mAH

/

6 x RS232

Gigabit Ethernet

Four video capture inputs

Accept two full-size PCI add-on card

12V/24VDC Input

Dimensions

Battery Module

CPC-1201

PCMCIA I/II/III

Cooling fan with removable filter

ACE-810VACE-818CACE-720APM

Features:

CPC-1201 is the best application for all sorts of automotive, even trunks and public transportation system.

Storage- 2 x 2.5" HDD drive bays with RAID controllor on system board meet MIL-STD-810F 514.5C-1 standard (Military specification). The anti-vibration design enabled the system maintain a stable performance in tough driving environment.- Compact Flash type II suitable for embedded system which is benefit for bundle with embedded applications and operation systems.

Optional Battery Module- The backup battery provides reliable power supply to the CPC-1201 a pure DC source with noise effectively filtered.

Video Capture Function- On board video capture function supports 4 channel video inputs, enhances the security and visual applications.

Multiple Serial COM Ports- Six COM ports are available for GPS, Touch screen, Card reader, Scanner or any kind of communication appliances.

Extensible PCI Slots- Two half-size add-on PCI cards are designed for function expansion such as CAN bus (ICAN-02) which is usually implemented for real-time communication between central controller and peripherals.

PCMCIA Applications- Applicable for PCMCIA modules such as GSM, GPRS, IEEE802.11a/b/g wireless communication card.

Mobile PC with ACE-810V 100W 12VDC input power supply

Mobile PC with ACE-818C 140W 24VDC input power supply

Mobile PC with ACE-720APM 200W AC input power supply (No Battery support)

High Integration Mobile PC SystemHigh Integration Mobile PC SystemHigh Integration Mobile PC System

OEM Project Welcome!

CP800CC400

/

5-1

Overview:IVC-4200 is a video capture card designed for multi-channel applications. It includes 4 channels MPEG-4 hardware encoder to provide real-time VGA quality video capture for each channel.

Key Feature:4 Channels MPEG 4 Hardware Video EncoderVideo quality up to VGA (Full D1) size at real time (30 fps) for each channelProgrammable constant bit-rate control

Specification: PCI V2.1 Compliance, Plug & Play support

MPEG4 Encoder x 4

MPEG4 Advanced Simple Profile @L3

Video Decoder x 4

16MB

4 Ch. BNC Composite Video, NTSC/PAL/SECAM auto sensing

720 x 480, 360 x 240, 180 x 120 (NTSC)

720 x 576, 360 x 288, 180 x 144 (PAL)

30 FPS (NTSC) for each channel

25 FPS (PAL) for each channel

DivX, Microsoft WMV, Sigma Design MPEG4, H.263

MPEG-2 MP @ ML

MPEG-1

Programmable GOP structures of I, IP, IBP, IBBP

Dynamically adjustable bit rate and frame rate to fit variable

bandwidths (for Internet communication applications)

Hardware control of brightness, contrast and saturation.

DVD quality full D1 video at 1 Mbps,

High quality CIF video at 384Kbps

High quality QCIF video at 96Kbps

Provide driver for Window 2000 and Windows XP systems

Provide SDK with demo program for software application

development.

PCI Interface

Video Encoding

Analog Video Capture

SDRAM

Video Input

Multiple Video Resolution

Frame Rate

Output Format

Compression

Image Processing

Video Performance

Device Driver

SDK

Hardware:

Video Input

Output Stream:

Software Support:

The first DVR solution that supports complete MPEG4 DVR software development! Preview/recording programs and SDK(Software Development Kits) with detailed documents are available.

Support “High” quality and “Low” bit rate image. You can adjust bit rate from 50Kb to 3M Kb, let you get perfect balance between image file size and quality. So that you can easily develop your own software for DVR or Streaming software.Support various kinds of image file format. Such as “MPEG1”, “MPEG2”, “MPEG4” , “DivX”, “Microsoft WMV”, “Sigma Design MPEG4”, “H.263”, etc.

IVC-4200 : 4 Channels MPEG4 Video Capture Card

Ordering Information

The Easiest Way to Develop MPEG4 DVR Solution

4 Channels MPEG4 video capture card4 Channels MPEG4 video capture card

NEW

6-1

■ ACE-840A� 400W ATX Power Supply ■ ACE-840AP� 400W ATX Power Supply with PFC function■ ACE-850AP� 500W ATX Power Supply with PFC function

ACE-840A/AP 400W PS/2 Type ATX Power Supply

ACE-850AP 500W PS/2 Type ATX Power Supply

¤ T V Rheinland

BAUARTGEPR�FT ¤

ORDERING INFORMATION

Power Connectors (ACE-850AP)

ACE-840AP

SPECIFICATIONS

■�Input :�95V AC~264V AC Full range (ACE-840AP/ACE-850AP ) �� 95V AC~132V AC, 180~264V AC Switch (ACE-840A)

■�Output Rating

� ACE-840AP/ACE-840A

Total Output of +3.3V and +5V shall not exceed 235W. +3.3V , +5V , and +12V total output power max. is 380W .

The output of +3.3V and +5V shall not exceed 150W. +3.3V , +5V and +12V total output power maximum is 478W.

■�Hold-up time : 17ms min. (ACE-840A/AP) / 18ms min. (ACE-850AP)■�Efficiency : 65% typ. (ACE-840A/AP) / 63% typ. (ACE-850AP )■�Protection : Over Voltage/Load Protection and short circuit protection .■�TTL signal compatible power good signal .■�Vibration : 10-55Hz at 2G 3min. period , 30min. along X ,Y and Z axis .■�Shock : 10G for 11ms once on each X,Y and Z axis.■�Built-in coolinh fan . ■�M.T.B.F. :�Minimum 100000 hours at 25¡C (ACE-840A/AP / ACE-850AP)■�Safety : � UL 1950, CSA 22.2 level 3, TUV or VDE EN 60950, NEMKO, CE, CCC. ■�EMI : � FCC parts 15 class "B" CISPR 22 level "B" .� Active PFC, complies with EN 61000-3-2 .■�EMS : � EN 50082-1 (1997) IMMUNITY STANDARD .■�Operating temp : 0~50oC ■�Storage Temp : -20~80oC ■�Power Connectors :

Nominal RegulationRipple/Noise Min. Max.

+3.3V+5V

+12V-5V

-12V+5Vsb

+/-5%+/-5%+/-5%+/-5%+/-5%+/-5%

50mV50mV

120mV100mV100mV50mV

0.3A0.1A0A0A0A0A

28A40A15A0.3A0.8A2A

Nominal RegulationRipple/Noise Min. Max.

+3.3V+5V

+12V CPU+12V I/O

-5V-12V

+5Vsb

-4% +5%-4% +5%-4% +5%-4% +5%+/-10%

-5% +9%-4% +5%

50mV50mV

120mV120mV120mV120mV50mV

0.4A3A1A1A---

27A29A18A18A0.3A0.8A2A

ACE-850AP

ACE-850APACE-840A

NEW

■�High efficiency■�Short circuit protection on all outputs■�Extra P10 (+5V) Connector for most � high-power requirement■�Built-in ball bearing cooling fan

FEATURES

20 PIN ATX4 PIN ATX-12VExtra +5V (P10) HDD or CD-ROMFloppy

ACE-840A/AP11182

ACE-850AP111112

PFCPFC

155 –10mm

155 –10mm

P1

PA

P2

P4P6P7

P5P8

P9

P14

P16P11P13

P10P12P15

12345678910

11

121314151617181920123456123412341234123412341234

REF. ID.

PinNo. Signal Wire

Color GaugeConnector

TypeCable

Length+5.5VDC+5.5VDC

COM+5VDCCOM

+5VDCCOM

PW-OK+5Vsb

+12VDC+3.3VDC+3.3V sense

-12VDCCOM

PS—ONCOMCOMCOM

-5VDC+5VDC+5VDC+5VDC+5VDC+5VDCCOMCOMCOMCOMCOM+12V+12V+12VCOMCOM+5V+12VCOMCOM+5V+12VCOMCOM+5V+12VCOMCOM+5V+12VCOMCOM+5V

181818181818181818181822181818181818181818161616161616181818181818181818181818222222221818181818181818

OrangeOrangeBlackRedBlackRedBlackGrayPurpleYellowOrangeBrownBlueBlackGreenBlackBlackBlackWhiteRedRedRedRedRedBlackBlackBlackBlackBlackYellow/BlackYellow/BlackuellowBlackBlackRedYellowBlackBlackRedYellowBlackBlackRedYellowBlackBlackRedYellowBlackBlackRed

+20-10500 mm

400 –15mm

MOLEX39—01—2200 orEQUIV.

MOLEX39-01-2200or EQIV.

AMP1—480424—0or EQIV

MOLEX39—01—2040or EQUIV.

400 –15mm

500 –15mm

400 –15mm

400 –15mm

155 –10mm

AMP1—480424—0or EQIV

AMP1—480424—0or EQIV

AMP1—480424—0or EQIV

AMP171822—4or EQIV

MOLEX90331

or EQUIV.

8-6

■ ACE-840APU2 400W ATX Power Supply With PFC Function

■ ACE-830APU1 300W ATX Power Supply with PFC function

■ ACE-830CU1 300W 24VDC ATX Power Supply

■ ACE-830TU1 300W 48VDC ATX Power Supply

■ ACE-830VU1 170W 12VDC ATX Power Supply

■ Input : 90V ~ 264VAC Full range (ACE-830APU1/ACE-840APU2)

■ Output Rating

The output of +3.3V and +5V shall not exceed 140W. Total output maximum 300W.

ACE-830CU1: The output of +3.3V and +5V shall not exceed 180W. +3.3V , +5V and +12V total output power maximum is 296W.

ACE-830TU1: The output of +3.3V and +5V shall not exceed 180W. +3.3V , +5V and +12V total output power maximum is 296W.

ACE-830VU1: The output of +3.3V and +5V shall not exceed 100W. +3.3V , +5V and +12V total output power maximum is 160W.

ACE-840APU2 : The output of +3.3V and +5V shall not exceed 200W. +3.3V, +5V and +12V total output power maximum is 380W.

■ Hold-up time : 16ms min. (ACE-840APU2) / 20ms min. (ACE-830APU1)■ Efficiency : 65% typ. (ACE-840APU2) / 70% typ. (ACE-830APU1)

60%(ACE-830VU1,ACE-830CU1) 65%(ACE-830TU1)■ Protection : Over Voltage/Load Protection and short circuit protection .■ TTL signal compatible power good signal .■ Vibration : 10-55Hz at 2G 3min. period , 30min. along X ,Y and Z axis .■ Shock : 10G for 11ms once on each X,Y and Z axis.■ Built-in cooling fan . ■ M.T.B.F. : Minimum 100000 hours at 25oC ■ Safety :

UL 1950 , CSA 22.2-234,level 3 , TUV ,CE, CCC . ■ EMI :

FCC parts 15 class "B" , CISPR 22 level "B" Active PFC, complies with EN 61000-3-2

■ EMS : EN 50082-1 immunity standard, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11

■ Operating temp : 0~50oC 0~70oC (ACE-830AUP1)

ACE-840APU2 400W ATX Power Supply300W 24VDC Input ATX Power Supply300W 48VDC Input ATX Power Supply170W 12VDC Input ATX Power Supply

ACE-830CU1ACE-830TU1ACE-830VU1

ACE-830APU1 300W ATX Power Supply

® TÜV Rheinland

BAUARTGEPRÜFT ®

SPECIFICATIONS

ORDERING INFORMATION

Nominal RegulationRipple/Noise

Min.Load

+3.3V+5V+12V-5V-12V

+5Vsb

±/5%+5/-4%±/5%±/5%

+8/-5%±/5%

50mV50mV120mV50mV120mV50mV

00.5A0.5A

000

Max.Load20A28A16A

0.5A1A2A

PeakLoad25A40A20A

ACE-830APU1

ACE-830CU1/TU1/VU1/ ACE-840APU2

ACE-830APU1

ACE-840APU2

ACE-830CU1/TU1/VU1

Dimensions (ACE-830APU1)

Dimensions (ACE-840APU2)

Dimensions (ACE-830ACU1/TU1/VU1)

Model Input Range Input CurrentACE-830CU1ACE-830TU1ACE-830VU1

+18~ +36VDC-36~ -72VDC+10~ +18VDC

30A @+24V DC15A @-48V DC30A @+12V DC

NEW

NEW

Nominal RegulationRipple/Noise Min.

ACE-830CU1 Max.

+3.3V+5V+12V-5V-12V

+5Vsb

±5%±5%±5%±5%

±10%±5%

50mV50mV120mV50mV120mV100mV

-3A1A---

20A25A22A0.8A1A2A

Min.ACE-830TU1

Max.-

3A1A---

20A25A22A0.8A1A

1.5A

Min.ACE-830VU1

Max.-

1.5A0.1A

---

10A15A10A0.5A0.8A1.5A

Min.ACE-840APU2

Max.-

3A1A---

28A33A22A0.5A1A2A

ACE-830APU111151

ACE-840APU211152

ACE-830CU1/TU1/VU111151

20 PIN ATX4 PIN ATX-12VExtra +5V HDD or CD-ROMFloppy

■ Storage Temp : -20~80oC

■ Power connectors

PFC

PFC

8-10

ACE-890

ACE-709

Industrial 1U Power Supply

lndustrial 1U 12V/24V/48VDC Input ATX Power Supply

ACE-890AP AC input 86W industrial PFC power supplyACE-890A AC input 90W industrial power supplyACE-890C 24V DC input 90W industrial power supplyACE-890P 100V DC input 90W industrial power supplyACE-890T 48V DC input 90W industrial power supplyACE-890V 12V DC input 75W industrial power supplyCB-8901 DC output cable for backplane (P8/P9 type) and HDD/FDD, 40cmCB-8902 DC output cable for CPU card (271-08TS) and HDD/FDD, 40cmCB-8903 DC output cable for NOVA series SBC (Molex 26-60-4080) and HDD/FDD, 40cm

®

Rated Load Max Output

ACE-890A/890APACE-890CACE-890PACE-890TACE-890V

85~264V AC18V~36V DC

70V~132V DC36V~72V DC9V~16V DC

10A 10A10A10A9A

2.5A2.5A2.5A2.5A2.5A

0.5A0.5A0.5A0.5A0.5A

Model Input Voltage+5V +12V -12V

12A 12A12A12A12A

4A4A4A4A4A

1A1A1A1A1A

+5V +12V -12V

PFC

CB-8901 CB-8902CB-8903

● Input / Output Table : (at 50oC)

ACE-890AP: min load + 5VDC/ 1.5A, + 12VDC, -12VDC/ 0.05A● Ripple and Noise : Less than +5V@50mV, ±12V@100mV Less than +5V@100mV, -12V@150mV, -12V@200mV (ACE-890AP)● Line Regulation : The line regulation for each output is less than ±1%, while measuring at rated loading and ±10% of input voltage changing● Load Regulation : Less than ±1%@+5V and ±5%@±12V● Efficiency : Higher than 70%● Hold-up Time (ACE-890A/890AP) : 16ms (typical)@115V AC● Protection : Over voltage protection. The trip point is around 5.7V~7.0V output● Operating Temperature : -20°~70°C (Derating curve will occur 50°~70°C)● Storage Temperature : -20°~85°C● Altitude : 0~10,000ft● MTBF : – ACE-890A : 268,358 Hours – ACE-890P : 265,827 Hours – ACE-890T : 269,884 Hours – ACE-890C : 252,383 Hours – ACE-890V : 245,424 Hours. – ACE-890AP : 50,000Hours● Safety : Meets UL 1950, CSA 22.2 No. 234, VDE EN 60 950● EMI : – Meets FCC docket 20780 curve "B", EN55022 "B" – Harmonic EN 61000-3-2 for ACE-890AP● EMS Standard (Designed to meet the following limits) : – IEC 801-2 15KV (Air Discharge) – IEC 801-3, 10V/M – IEC 801-4, 2KV – IEC 801-5, 2KV● Dimensions : 89(W) x 39(H) x 152.4(D)mm; (3.5" x 1.5" x 6")

● High efficiency

● Low Ripple and Noise

● Short circuit , Overload , Over voltage Protected

● Input Voltage / Input Current:

● Output Rating (at 50oC)

Model Input Range Input Current MAX CurrentACE-709CX 18VDC~32VDC 6A@+24VDC 8A@+18VDCACE-709TX 36VDC~72VDC 3A@ -48VDC 4A@ -6VDCACE-709VX 9VDC~16VDC 10A@+12VDC 13A@+9VDC

Rated Max Rated Max Rated Max

+5V +/-1% 10A 15A 10A 15A 8A 12A

+12V +/-5% 2.5A 5A 2.5A 5A 2.5A 4A

-12V +/-5% 0.5A 1A 0.5A 1A 0.5A 1A

+5Vsb +/-5% 0.5A 1A 0.5A 1A 0.5A 1A

ACE-709CX ACE-709TX ACE-709VX

● Ripple and Noise: Less than 1% of each output at rated load● Efficiency: Higher than 75%(ACE-709CX/ACE-709VX) Higher than 70%(ACE-709TX)● Protection: Over voltage/Load protection and short circuit protection● Altitude: 0~10,000 ft● TTL signal compatible power good signal● MTBF: – ACE-709CX: 158,117 hours – ACE-709TX: 170,1210 hours – ACE-709VX: 162,630 hours● Vibration: 10-55Hz at 2G 3min period 30min along X,Y and axis● Shock: 10G for 11ms once on each X,Y and Z axis ● Safety: UL 60950 , CSA C22.2 NO 60950 , EN 60950:2000, CCC● EMI: FCC docket 20780 curve “B” , EN 55022 class “B”● EMC: EN 61000-4-2 4KV contact°Fair discharge criterion B EN 61000-4-3 10V/M with 80% AM criterion A EN 61000-4-4 2KV criterion B EN-61000-4-5 0.5KV criterion B● Operating Temp: 0~70oC● Storage Temp: -20~85oC● Dimensions: 89(W)x39(H)x152.4(D)mm

ACE-709CX 90W 24V DC input ATX Power SupplyACE-709TX 90W 48V DC input ATX Power SupplyACE-709VX 80W 12V DC input ATX Power Supply

Nominal Regulation

ACE-890

NEW

® TÜV Rheinland

BAUARTGEPRÜFTSPECIFICATIONS

ORDERING INFORMATION

SPECIFICATIONS

ORDERING INFORMATION

FEATURES

DIMENSIONS:DIMENSIONS:

ACE-709+5Vsb & PS On cable

32.8 39.0

8-11

ACE-713APM

ACE-720APM

ACE-728APM

130W Medical ATX Power Supply200W Medical ATX Power Supply280W Medical ATX Power Supply

® TÜV Rheinland

EN60601-1

Designed for Medical Appliance Product!!

● High efficiency over 82%● EN 61000-3-2 Compliance ● Low leakage current● Low Ripple and Noise ● Short circuit , Overload , Over voltage Protected

Nominal Min Rated Max Min Rated Max Min Rated Max +5V 0.2A 10A 16A 2A 20A 25A 2A 28A 40A +12V 0A 6A 8A 0A 9A 12A 0A 10A 15A -12V 0A 0.5A 1A 0A 0.5A 1A 0A 1A 1A +5Vsb 0A 0.5A 1A 0A 0.5A 1A 0A 1A 1A

ACE-713APM ACE-720APM ACE-728APM

● Input Voltage : 85VAC~265VAC● Output Rating (at 50oC)

+5V and +12V combine power max 120W , Total output power max is 130W (ACE-713APM)+5V and +12V combine power max 185W , Total output power max is 200W (ACE-720APM)+5V and +12V combine power max 265W , Total output power max is 280W (ACE-728APM) ● Ripple and Noise : Less than 1% of each output at rated load● Load Regulation :

ITEMACE-713APMACE-720APMACE-728APM

+5V+/- 1%+/- 1%+/- 1%

+12V+/- 3%+/- 5%+/- 5%

-12V+/- 3%+/- 5%+/- 5%

+5Vsb+/- 3%+/- 1%+/- 1%

● Hold-up time : 20ms min● Efficiency: Higher than 82%● Protection: Over voltage/Load protection and short circuit protection● Altitude: 0~10,000 ft● TTL signal compatible power good signal● MTBF: – ACE-713APM: 143,781 hours – ACE-720APM: 97,572 hours – ACE-728APM: 97,254 hours● Vibration: 10-55Hz at 2G , 3min period , 30min along X,Y and Z axis● Leakage current: Less than 500µA at 240V AC● Shock: 10G for 11ms once on each X,Y and Z axis ● Safety: UL 2601-1 , IEC 601-1 , EN 60601-1, CCC● EMI: FCC docket 20780 curve “B” , EN 55011 class “B” , EN 61000-3-2 class “D” ● EMC: EN 61000-4-2 4KV contact°F8KV air discharge criterion B EN 61000-4-3 10V/M with 80% AM criterion A EN 61000-4-4 2KV criterion B EN 61000-4-5 Line to Line 1KV ; Line to ground 2KV criterion B EN 61000-4-6 10V with 80% AM criterion A EN 61000-4-8 30A/m criterion A EN 61000-4-11 30% dips 10ms , criterion B 60% dips 100ms , criterion C >95% dips 5000ms , criterion C

● Operating Temp : 0~70oC● Storage Temp : -20~85oC(ACE-720A-PM/ACE-728APM) -40~75oC(ACE-730A-PM) ● Dimensions : 89(W)x39(H)x152.4(D)mm(ACE-713APM) 97(W)x40.5(H)x198(D)mm(ACE-720APM) 112(W)x51(H)x203(D)mm(ACE-728APM)

ACE-713APM 130W Medical ATX Power Supply with PFC function

ACE-720APM 200W Medical ATX Power Supply with PFC function

ACE-728APM 280W Medical ATX Power Supply with PFC function

ACE-713APM

ACE-720APMACE-728APM

NEW

PFC

® USC

UL-2601

SPECIFICATIONS

FEATURES

ORDERING INFORMATION

Dimensions (ACE-713APM):

Dimensions (ACE-720APM):

Dimensions (ACE-728APM):

+5V & PS On cable

193.0

26.5

17.25

5.05.0

81.5

A

A

A A

A

A

193.0

For #6-32 screw

Mounting Holes, x8

8-15

■ ACE-818C +24V DC Input 140W ATX / Battery Backup Function Power Supply■ ACE-810V +12V DC Input 100W ATX / Battery Backup Function Power Supply

■ Input: ■ Output Rating: (at 50oC)

ACE-810VACE-818C

DC Input 100W / 140W Power Supply with Battery Backup Function

® TÜV Rheinland

BAUARTGEPRÜFT ®

SPECIFICATIONS

ORDERING INFORMATION

Model Rated Load Max. Load

ACE-818CACE-810V

+5V16A8A

+12V4A2A

-12V0.5A0.5A

+5Vsb1A1A

+5V20A12A

+12V8A4A

-12V0.5A0.5A

+5Vsb1.5A1.5A

Model Input Range Input Current

ACE-818C

ACE-810V

+18V~+32V DC

+9V~+16V DC

10A@+24V DC

14A@+12V DC

Note:The total output continuous power shall be kept under 140W at 24VDC input (ACE-818C) The total output continuous power shall be kept under 100W at 12VDC input and forced air-cooling. Without fan cooling is only 80W.(ACE-810V)

■ Min. Load: +5V/0.5A +12V/0.2A■ Efficiency: Higher than 70% at 12V or 24VDC input■ Protection: over voltage, short circuit, and over load protection.■ Input polarity operation: When wrong polarity is connected to input

terminal, should not cause any damage on the power supply.■ Power On Signal: This TTL compatible signal (active low) is use to

switch ON the main output. When “Power ON” is disconnected from secondary common, all outputs except +5Vsb shall turn off.

■ Battery Backup and Hold up time: Upon loss of DC input, the unit mustoperate from the battery. Hold up time is around 2 minute on the battery capacity.

■ Built-in cooling fan■ MTBF: 110,000 hrs■ Vibration: 10Hz~55Hz at 2G, 3minutes period, 30 minutes along X, Y, and Z axis.■ Shock : 10G for 11ms half sine wave, one time for each of ±X, ±Y , ±Z axis.■ Safety: Designed to meet the following standards

UL 60950 CSA 22.2 No.60950 EN 60950: 2000■ EMI : Designed to meet the following radiation limited :

FCC docket 20780 curve "B" EN55022 class "B" ■ EMS : Designed to meet the following limits

EN61000-4-2 4KV contact; 8KV air discharge Criterion BEN61000-4-3 10V/M with 80% AM Criterion AEN61000-4-4 2KV Criterion BEN61000-4-5 0.5KV Criterion B

■ Operating Temp. : 0~50oC■ Storage Temp.: -20 ~85oC■ Connectors : TB1- primary DC input: 3-position Terminal blocks

TB2-DC output: 6-position Terminal blocksTB3-auxiliary 8-pin connector:

PIN12345678

TB1+-E

TB2+5V+5VGUNGUN+12V-12V

TB3Vin signal 1 (Hi, Lo)

Vin signal 2 (Hi pulse)+5VsbGND

Power onNC

I/P Battery monitor (+)I/P Battery monitor (–)

TB4Battery (+)Battery (–)

The ACE-810V/818C is designed for mobile PC applications. The most valuable feature is that it has a secondary battery input that keeps the power supply running when the primary 12V DC or 24V DC is lost. Then the power supply switches to battery backup mode. ACE-810V/818C two kinds of signals VS1 and VS2. After the primary lost message is displayed, the PC may do a system shutdown that is controlled by the software program.

For ACE-810V/818C are not only applied as a power supply. It can be treated as a UPS (uninterruptible power supply) while combined with battery module .This series of power supply provide stable electronic and send signal from TB-3 of PIN2 for doing system control and configuration depending on user's demands. Moreover, it is easy to connect within voltameter for doing voltage monitoring.

*Notes: It can be used as an identifier by PIN2 signal while there are interrupt of DC power and recovery.

TB-3 Connector Application explain

PIN1: Power GoodPIN2: Pulse signal indication of DC input

statusPIN3: +5VsbPIN4: GroundPIN5: Power onPIN7/PIN8: Measure battery capacity

NEW

When Vin Signal 1 change state, Vin signal 2 willProvide one shot pulse between 0.2 sec and 0.6 sec

8-16

TB3 Cable

ORDERING INFORMATION

ORDERING INFORMATION

ACE-903A +5V 30W Embedded ATX Power Supply

ACE-903A +5V 30W Embedded ATX Power Supply

● Input Voltage : 90V~264V AC

● Input Frequency : 47Hz~63Hz

● Output Rating : +5V Rated load : 6A , +5Vsb Rated load : 0.3A

● Ripple and Noise : Less than 1% of each output at rated load

● Load Regulation : +5V , +5Vsb is less than +/- 1%

● Hold-up time : 20ms min

● Efficiency : 70%

● Protection : Over voltage/Load protection and short circuit protection

● Altitude : 0~10,000 ft

● TTL signal compatible power good signal

● MTBF: 207,606hrs at 25oC

● Vibration : 10-55Hz at 2G , 3min period , 30min along X,Y and Z axis

● Shock : 10G for 11ms once on each X,Y and Z axis

● Safety : Meets UL 60950 , CSA 22.2 NO.234 , VDE EN 60950

● EMI : Meets FCC docket 20780 curve "B" , EN 55022 class "B"

● EMC : Meets EN 61000-4-2 8KV air discharge criterion A EN 61000-4-3 3V/M criterion A��� EN 61000-4-4 2KV criterion A EN 61000-4-5 2KV criterion A

● Operating Temp : 0~50oC

● Storage Temp : -40~85oC

● Dimensions : 70(W)x33(H)x110(D)mm

¤

T V Rheinland

BAUARTGEPR�FT

¤

T V Rheinland

BAUARTGEPR�FT

Dimensions:

Dimensions:

SPECIFICATIONS

ACE-906V ACE-906V ACE-906V 12VDC to 5VDC 60W Power Supply

● Input Voltage : 9.6V~14.4V DC

● Output Rating : +5V MAX : 12A

● Ripple and Noise : 30mV

● Load Regulation : +5V less than +/- 2%

● Efficiency : 80%

● Altitude : 0~12,000 ft

● TTL signal compatible power good signal

● MTBF:100,000hrs at 25℃

● Protection : Over voltage/Load protection and short circuit protection

● Vibration : 10-55Hz at 2G , 3min period , 30min along X,Y and Z axis

● Shock : 10G for 11ms once on each X,Y and Z axis

● Safety : Meets EN 60950 , IEC 950

● EMI : Meets FCC , Part 15 , Class "B" , CISPR 22 Class "B"

● EMC : Meets EN 61000-4-2 8KV air discharge criterion B EN 61000-4-4 2KV criterion B ��� EN 61000-4-5 2KV criterion B

● Operating Temp : 0~50oC

● Storage Temp : -40~85oC

● Dimensions : 64(W)x20(H)x92.8(D)mm

SPECIFICATIONSFEATURES

ACE-906V 12VDC to 5VDC Input 60W Power Supply

● High efficiency over 80%

● Low Ripple & Noise

● Output over voltage protection

● Short circuit protection on all outputs

PIN123456

Cable+5V+5VGUNGUN

+5VsbPS ON

PIN123456

TB1+-

TB2GUNGUNGUN+5V+5V+5V

NEW

NEW

8-18


Recommended