Advanced Prophy and Cavity Preparation

Without Rotation

Unlike conventional rotary cutting instruments, however, the Aquacut Quattro is not in direct contact with the tooth structure. There is no vibration, heat generation, turbine noise or smell. Moreover, in most cases the gentle action of the Aquacut Quattro removes the need for local anaesthesia, saving you time and making the whole experience far less traumatic for your patient.

The Aquacut Quattro enables you to perform a fast and effective cleaning of your patient’s mouth to give a much quicker and more accurate diagnosis of their dental condition. At the twist of a switch, the Aquacut Quattro changes into a powerful cutting tool that can cut hard tissue quickly.

CAVITY PREPARATION TO PROPHY AT THE TWIST OF A SWITCH

SPEED CONTROL

POWDER CONTROL

0.8mm

0.6mm

0.4mm

E A S Y TO U S E A N D V E R S AT I L E

The handpiece is autoclavable and comes in five colour-coded cutting nozzle sizes. The long-life tungsten carbide cutting nozzles can be easily

changed - depending on treatment.

FO OT CO N T R O LThe unique 3-way foot control enables cut, clean, wash and dry operations to be carried out through the same handpiece without withdrawing from the mouth - a great time saver.

C U T, W A S H A N D D R Y

C U T, W A S H A N D D R Y

P OW D E R C A RT R I D G E SSelf-contained disposable, gama-irradiated powder cartridges allow for quick and easy replacement. The cartridge has an inbuilt feed system that ensures zero maintenance as it is automatically replaced at each change.

H YD R O PA RT I C L E T E C H N O LO GY The Aquacut’s high-speed fluid stream, fed from a small reservoir, provides a continuous cavity wash during cutting and virtually eliminates airborne powder and tooth debris. This unique technology gives outstanding cutting efficiency and minimal patient discomfort.

29 MICRON ALUMINIUM OXIDE

CAVITY PREPARATION

53 MICRON ALUMINIUM OXIDE COMPOSITE RESTORATION

SODIUMBICARBONATE

POLISHING / PROPHY

SYLCFOR AQUACUTDESENSITISING CLEANING AND STAIN REMOVAL

C AV I T Y P R E PA R AT I O NA N D P R O P H YL AX I S

The AQUACUT QUATTRO is ideal for use in conjunction with modern dental adhesives and filling materials. It rapidly and efficiently removes

composites or hard tooth tissue, leaving cavity surfaces ready to receive the latest resins.

It is an exceptional tool for the repair of composites and enables fast repair of existing fillings that have begun to fail.

The design of the AQUACUT QUATTRO allows you to change instantly from cutting mode to stain removal - without changing the handpiece.

This facility makes the AQUACUT QUATTRO equally useful to dentists and hygienists.

C L E A N I N G

P O L I S H I N G

BEFORE

TREATMENT

AFTER

SUPPLIED COMPLETE AND READY TO USEThe AQUACUT QUATTRO system is supplied with handpiece, foot

control pedal and two grades of cutting media, plus stain removal powder.

All that is required is compressed air (clean, dry and up to 7 bar in

pressure). A suitable air compressor can bepurchased as an optional extra.

SAFE FOR TEETHThe AQUACUT QUATTRO cuts very conservatively, minimising the

removal of sound tooth material. There is no direct contact with the tooth - the risk of chipping or stress fracturing is eliminated.

C U T T I N G A N DR E S TO R AT I O N

T R E AT I N G

BEFORE TREATMENT

AFTERTREATMENT

FINISHEDRESTORATION

A DVA N TAG E S O F T H EAQ UAC U T Q UAT T R O

THE PERFECT INSTRUMENT FOR MINIMALLY INVASIVE DENTISTRY

No chipping or stress fractures, plus minimalremoval of sound tooth material

Quick and efficient - reduced treatment times

Versatile – able to clean, treat, wash and dry

Patient friendly – no heat, noise, vibration or smell

Reduces the need for local anaesthesia

More conservative than a hard tissue laser and at a fraction of the cost

Fully portable and easy to operaterequires only an air supply

A unique product, using advanced patented technology

1.2.3.4.5.6.7.8.

Dr. R. Narendranath

Dr. J. Patel

Dr. S. Hargreaves

External Supplies: Clean, dry, compressed air, 6 bar (90psi) minimum, 7.5 bar (110psi) maximum. Inlet air supply connection Ø 4mm push-in fitting.Foot Control : Three-way multi-functional foot valve for cut, wash and dry control. 2m (6ft), three-core pneumatic supply tube.Output Pressure: Infinitely variable cutting/polishing air pressure between 0 - 7 bar (100psi), controllable via rotating switch and pressure gauge. Cutting Media: 53 and 29 micron Aluminium Oxide. Powder rate infinitely variable between 0 and 6g / min (0.2oz) via rotating switch and pressure gauge. Polishing Media: Sodium Bicarbonate, Sylc For AquacutHandpiece: Anodised Aluminium with separate integral powder and fluid

channels (both operated by foot control). Nozzles made from stainless steel tube with Tungsten Carbide tip.

Handpieces incorporate quick release system for convenient changeover of cutting sizes.

Colour coded handpieces for simple tip-size identification: Green - 0.4mm (optional extra) Silver - 0.6mm (supplied with the Aquacut QUATTRO) Gold - 0.8mm (optional extra)

S P E C I F I C AT I O N S

CERTIFICATION: CLASS IIA HOMOLOGATION CE0120CLASS IIA UNITED STATES FDACLASS II CANADA TPDCLASS II AUSTRALIA TGA

US PATENT NO.6676409Parallel Patents Pending

D I M E N S I O N SDepth: 240mm / 9.4”

Height: 240mm / 9.4”

Width: 300mm / 11.8”

Weight: 4.1kg / 9.0lbs

© 2010 VELOPEX INTERNATIONALUNITED KINGDOM • UNITED STATES OF AMERICA • FRANCE

VELOPEX is a registered Trademark of Medivance Instruments Limited, United Kingdom. The design of the VELOPEX products is protected

by patent in all major countries. Medivance reserves the right to make changes and improvements in its products which may vary the

specifications from those in this brochure.

INTERNATIONAL

UNITED KINGDOM (HEAD) OFFICEMEDIVANCE INSTRUMENTS LTD.

Barretts Green RoadLondon

NW10 7APTel. +44 (0)20 8965 2913Fax. +44 (0)20 8963 1270www.velopex.com

FRENCH OFFICEVELOPEX INTERNATIONAL14 route de Montreuil le Gast

B.P. 4535520 Melesse

Tel. +33 (0)2.99.13.22.59Fax. +33 (0)2.99.13.22.60

www.velopex.fr

USA OFFICEVELOPEX INTERNATIONAL

105 East 17th StreetSaint Cloud

Florida 34769Tel. +1 (407) 957 3900Fax. +1 (407) 957 3927

www.velopexusa.com

aqb2

3.12

.10r

pc