+ All Categories
Home > Documents > Advances in Surface Engineering II - TMS

Advances in Surface Engineering II - TMS

Date post: 12-Apr-2022
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
1
February 23-27, 2020 San Diego, California, USA Abstract Deadline is July 1, 2019. Submit online at www.programmaster.org/TMS2020. SUBMIT AN ABSTRACT BY JULY 1 Submit an abstract to: Questions? Contact [email protected] Materials Processing Advances in Surface Engineering II This symposium aims to capture recent advances in processing, characterization, simulation/modeling, and applications related to surface engineering of materials. The symposium topics include, but are not limited to: Coatings (metallic, ceramic, organic, and composite coatings) Surface protection from wear and corrosion Surface characterization techniques Surface alloying Nanostructured surfaces Biomaterials High-temperature coatings Additively manufactured surface ORGANIZERS Tushar Borkar, Cleveland State University, USA Arif Mubarok, PPG, USA Rajeev Gupta, The University of Akron, USA Sandip Harimkar, Oklahoma State University, USA Tanaji Paul, Oklahoma State University, USA SYMPOSIUM SPONSORS TMS Materials Processing & Manufacturing Division TMS Surface Engineering Committee
Transcript
Page 1: Advances in Surface Engineering II - TMS

February 23-27, 2020 • San Diego, California, USA

Abstract Deadline is July 1, 2019. Submit online at www.programmaster.org/TMS2020.

SUBMIT AN ABSTRACT BY JULY 1

Submit an abstract to:

Questions? Contact [email protected]

Materials Processing

Advances in Surface Engineering II This symposium aims to capture recent advances in processing, characterization, simulation/modeling, and applications related to surface engineering of materials. The symposium topics include, but are not limited to:

• Coatings (metallic, ceramic, organic, and composite coatings) • Surface protection from wear and corrosion • Surface characterization techniques • Surface alloying • Nanostructured surfaces • Biomaterials • High-temperature coatings• Additively manufactured surface

ORGANIZERSTushar Borkar, Cleveland State University, USA Arif Mubarok, PPG, USA Rajeev Gupta, The University of Akron, USASandip Harimkar, Oklahoma State University, USA Tanaji Paul, Oklahoma State University, USA SYMPOSIUM SPONSORSTMS Materials Processing & Manufacturing Division TMS Surface Engineering Committee

Recommended