ACTIVATION INSTRUCTION

Trial and Permanent

Trial Activation Instruction

Trial activation instruction

Start any Autodesk Revit software and follow these steps:

1. Find the tool in a separate add-in menu → open „About“ form (eg: click T4R: Document→ Smart Assemblies →

About)

1

Trial activation instruction

2. Select “License information…”

3. Select “Update license…”

2

3

Trial activation instruction

4. Select “Trial licence” → “Next”

5. Select “Request now” → “Next”

6. Enter required information → “Next”

7. Click “Close”. Note: activation code will be sent to your email in 24 hours.

4

5

6

7

Trial activation instruction

8. You will be provided with activation code. Select “Enter Activation code” → “Next”

9. Enter activation code → “Next”. Note: Activation code have to match request code

10. Click “Finish”. The product will be activated.

8 9 1

0

Permanent Activation Instruction

Repeat the steps from 1 till 3.

4. Select “Full licence” → enter Serial Number (xxx-xxxxxxxx) → click “Next”. Serial Number

will be provided by “AGA CAD” or your local reseller

5. Select “Activate now” → click “Next”

6. Enter required information and click “Next”

7. Click “Finish”. The product will be activated.

Note: Serial Number will

be provided by “AGA CAD”

or your local reseller.

4 5

6

7

Permanent activation instruction

Manual Trial or Permanent

Activation Instruction

Usually goes if you have problems with Internet connection and you can’t

activate it automatically

Manual Trial or Permanent Activation

Instruction

Repeat the steps from 1 till 3.

4. Select “How to request Activation Code” and click “Next”

5. Send required information to register@aga-cad.com via e-mail → “Close”.

Note: activation code will be sent to your email in 24 hours.

6. You will be provided with activation code. Select “Enter Activation code” → “Next”.

7. Enter activation code → “Next”. Note: Activation code have to match request code.

8. Click “Finish”. The product will be activated.

4 5

Abort Pending Activation

Usually goes if you have problems activating several times

Abort Pending Activation

Repeat the steps from 1 till 3.

4. Select “Abort Pending Activation” and click “Finish”

5. “Update licence…” and you will have possibility to make trial or permanent activation again.

4

5

ENJOY WORKING WITH OUR PRODUCTS!

If you have any questions, contact us:

support@aga-cad.com