Page 1
Air Cooling System
We are involved in offering a wide range of Air Cooling System, which includes Air Washer, Air
handing Unit, Fresh Air Unit and Cellulose Paper Pad / Cooling Pads PVC Fills, FAN COIL UNIT Ductable Unit. These are commonly used for dissipating heat, which works with an increased flow of
air over its surface. These are available in various customized finishes as per the clients need.
Air Washer / Industrial Cooler
Capacity Availiable : 2000 to 40000 cfm with single blower & 4000 to 80000 cfm with single & multiple blowers
Base Frame: the total assembly is mounted on a horizontal member of heavy mild steel channel.
Fan Section : constructed in gi sheet with inspection doors.
Wet Section : constructed in gi sheet.
Water Tank constructed in gi /ss
Blower : dynamically balaced forward curved, didw type make enviro tech / imported.
Cellulose Paper Pad :imported
Electric Motor : three phase, tefc squirrel cage induction motor of standard makes (crompton, abb and kirloskar etc. ).
Drive Pulley : v-groove with/without taper lock hub.
V-Belts : fenner make.
Pump: monoblock make crompton / kirloskar.
Filter: hdpe/aluminum/gi mesh filter, micro vee, hepa as per requirement.
Pipe Fittings : pvc/gi piping with all necessary fittings such as float valve, quick fill, overflow & drain ports.
Application.
air conditioning, showroom, shopping mall, restaurant & bar, hotels, office, call centre, building, schools, studio, institute,
hospital, pharma company, clean room, etc.
Page 2
AHU Unit / Air Handling Unit.
Enviro Tech manufacturing of single & double skin air handling unit and ceilng suspended units of higher cpacity 800 cfm to
60000 cfm-v-beltt drive & direct drive static presure 10 mm to 300 mm w. G. Depends on the application and requirement. we
are manufacturing air handling unit & ceilng suspended units in single & double skin configurations casing the standard
aluminum hollow profile, pannel thick 25mm insulation p. U. F outer colour coated sheet. Inner gi plain sheet, blower
centrifugal type forward curved, wet and dry sections, cooling coil filter section easly slided for 50 mm thick pre air filter box
type washable type & canvas.
Technical Specifications.
Type.
horizontal, vertical, ceiling suspended as per customer’
requirement.
Applications.
suitable for cooling, heating, humidification, ventilation.
Panels.
CFC free puf injected (25mm/42mm) panel in double
skin.
Casing structure (thermal break on request.)
Extruded alluminium hollow profiles frames self-
supporting type.
Drain Pan.
Alluminium/satainless steel.
Filter.
Synthetic media filter are provided as standard microvee
& hepa filter can also be provided on request.
Coil Section.
Optimum circuit designed coil are provided for maximum
heat transfer as per duty requirement.
Page 3
Fans.
Nicotra/kruger centrifugal fan are used either sisw or didw
type with forward cuve or backward curved driven with v
belts as per static pressure requirements.
Inspection Doors.
Provided with limit switch for safe maintenance of blower
& blower motor.
Optional Attachments
Mixing chamber with box type opposed louver dampers.
Microvee filter chamber with microvee filter.
Hepa chamber filter with hepa filter.
Application. Air Conditioning, Showroom, Shopping Mall, Restaurant & Bar, Hotels, Office, Call Centre, Building, Schools, Studio, Institute,Hospital, Pharma Company,Clean Room, etc.
Fresh Air Unit / Dust Free Unit.
Unit Capacity
from 2000 cfm to 50000 cfm or above
Casing
in double skin construction the structure is made of hollow aluminum profile with nylon corners and panels are made of 0. 6
mm thickness pre - coated outer sheet and gi inner sheet. The panels are insulated with injected puf (38kg / cubic m.) / eps
Page 4
slabs / kini foam. In single skin construction the structure is modular type, made of gi hollow profile and is mechanically bolted
with top and bottom tray. Panels are made of 18g. Or 16g. (thickness varies according to the size of unit).
Blower
the blowers used in unit are imported or indigenous and is centrifugal type forward curved for normal static pressure, mounted
on rubber isolators for smooth and quite operation. Sant make blowers are dynamically and statically balanced on fie make
computerized balancing machine.
Motor
the motor used is drip proof mounted on specially designed adjustable motor base. Electrical supply normally is 3 ph / + / -415
volts.
Flat Filter Section
filter section channels are designed for 50 mm thick expanded aluminum mesh washable pre filters with easily removable
facility.
Applications :
Malls,Offices,Hotels,Auditoriums,Restaurants,Hospitals,Shops,Clubs,Banks,Banquet Halls,Shopping Plazas
Features :
Ductable,Compact Size,Easy Maintenance,Energy Efficient,Access Door,Economical Operation,Low Noise,Easy
Installation,Gasket Sealed Panel.
Cellulose Paper Pad / Cell Deck / Air Cooling Pad / Evaporative Cooling Pad,
Apart from manufacturing the fans for various applications. Enviro tech markets the cell deck cooling pad, made by various
companies in India and abroad and is well established with respect to poultry, horticulture (green house) and industrial
applications.the evaporative cooling pad (ecp) made of cell deck cooling pad paper is engineered from cross-sectional,
Page 5
specially treated flute media capable of absorbing and retaining water to provide the maximum cooling efficiencies. The cell
deck cooling pad media is treated with stiffening and wetting agents to provide the cooling, without any water carryover.
the pads are designed for tropical and subtropical countries, ensures greater performance during summer seasons. The pad
media is treated with anti-rot and rigidifying resins. The media is cross- corrugated to maximize the mixing of air and weather.
Saturation effectiveness ranging from 50 to 98% can be achieved depending upon air velocity and depth of the cooling pad.
air flows horizontally, while the re-circulating water flows vertically, through the pad. The water is collected at bottom of the
pad and is re-circulated again by a pump through the unique gutter system made of g. I. Sheet.
Applications:
* Live stocks.
* Greenhouses.
* Gas Turbine.
* Pre Cooler For Air Cooled Condenser.
* Spray Painting Booth.
* Industrial Applications.
* Commercial Applications.
* Humidification.
The size and the specification standards of the
Cooling Pad
H: height
W: width
D: thickness h: corrugated high α: corrugated angle (1) β: corrugated perspective
ETIP 790 ETIP 590
H (mm) 1500,1800,2000 1500,1800,2000
W (mm) 600,300 600,300
D (mm) 100, 200,300 100,200
h (mm) 7 5
α (°) 45 45
β (°) 45 45
Note: The special specifications will be produced separately
Page 6
Fan Coil Unit
Fan coil units are available in two configurations: horizontal type suitable for ceiling suspension and vertical type suitabia for
floor mounting:
Casing: galvanised sheets of heavy gauge steel with suitable drain tray to avoid sweating. The fan coil unit are (double skin)
painted with stove paint/ h. T. Paint, electro static paint as per customer requirements.
Blowers: the multiblade forward curved centrifugal type aluminium fan wheels statically and dynamically balanced are driven
by extended shaft motor.
Fan Motor: 3 speed, permanent split capacitor type motor with extended manual speed selection.
Drain Fan: heavy gauge. Double skin insulated drain pan extend full width of coil collect condensate from chilled water coils,
valve and fitting with provision of drain nipple to avoid overflow.
Cooling Coil: 3 row deep, 3/8 o. D. Copper tubing, aluminum fin constuctioin provide maximum. Heat transfer. The water inlet
and outlet are provided with flare nut for connections to control valves.
Air Filter: filter are made of expanded aluminum mesh/ hdpe media/synthetic non-w oven media and are permanent
cleanable type filter the air to a maximum deg.
Technical Specifications:
• model no enviro tech fan coil unit.
• ceiling suspended type unit.
• powder coating type unit.
• centrifugal blowers’ dwdi aluminum impeller with static & dynamically balanced
• single phase motors.
• cooling coil copper pipes.
• g. I. Sheet.
• drain tray with insulation.
• {enviro tech industrial products fan coil unit model no – etipfcu.
• available size 1. 0 tr, 1. 5 tr, 2. 0 tr, 2. 5 tr, 3. 0 tr, 5. 0 tr.
• fan coil unit direct driven.
• fan coil unit v belt driven.
• fan coil unit horizontal arrangement.
• fan coil unit ceiling suspended.
• fan coil unit duct able ac.
• fan coil unit ac ducting system.
Applications:
Showroom,Shopping Mall,Restaurant & Bar,Hotels,Office,Call Centre,Building,Clean Room.
Page 7
Ductable Unit
Capacity Range: Ceiling Suspended Ductable Units { 1000 cfm - 12ooo cfm. } { Belt Drive }
Direct Drive Celing Suspendded Ductable Units { Capacity 1000 cfm 5000 cfm. } Direct Direct Drive}
Institutional Space: Schools, Libraries, Temples.
Special Features
Special Features
Cooling Coil high effciency sine enviro tech coil cw/dx evaporator type are made with copper tube and aluminum
fins mechanically bonded to the tubes
Blower Direct driven heavy duty didw forward curved (dynamically and statically balanced) ard for quite
operation.
Motor Ge/crompton make motor is provided for trouble free performance.
Range Models are available from 1200 cfm to 400 cfm.
Casing All casing consist of heavy gauge galvanized finish with powder coting.
Filter Washable hdpe air filter is provided with standard units.
Drain pan Evafoam/polystyrene insulated drain pan.
Service Bottom openable.
Optional
Applications:
Residential,Buildings,Schools & Institutes,Auditoriums,Banquet Halls,Poultry Farms,Shopping
Plazas,Hotel,Kitchens,Generator Rooms,Pharmaceutical Plants,Food Processing
Units,Hotels,Banks,Offices,Canteens,Temples,Hospitals,Bakeries,Factories,Restaurants,Live
Stocks,Show Rooms,Green Houses.
Page 8
Axial Flow Fan
Enviro Tech axial flow fans have ms casing / bracket with cast aluminium alloy impeller with aerofoil section blades suitable
for various mountings.
Enviro Tech axial flow fans are used in industry for providing general ventilation, fume exhaust and removal of hot spots and
as roof extractor.
Enviro Tech offers a most economical and efficient installation for the industry such as thermal power stations, fertilizers,
heavy engineering, chemical, textiles, food, general, paper and sugar pharmaceuticals ets.
Our Range Is Available In:
• Size: 100 mm to 1800mm
• capacity: 1000 cmh to 45000 cmh
•
Static Pressure: 15 mm wg to 150 mm wg
Specification :
• Axial Flow Fans,Ventilation,Air Conditioning,Industrial Process Systems,Crop Drying,Mines,Ships,Efficiency And Economy,
Space Saving,Adjustable Impellers,High Operational Temp,Long Life.
Application:
Air Ventilation,Air Cooling,Air Humidification, And Fume Exhaus
Page 9
Air Curtain / Duct Line
An Air Curtain is a modern device which when installed on a door forms an invisible curtain of continuous air which restrict the
escape of conditioned air and also prevent entry of outside hot, humid, dirty and unwanted polluted air.
Enviro Tech Air Curtains areavailable in two configuration (both vertical and horizontal) and 4 different velocities. They are
suited for door opening ranging from 2. 5 ft. (0mm) wide to 8 ft. (2. 44 mtrs) wide and invelocities ranging from 7 m/sec. Or above
as per customer requirements. These velocities are divided in 4 different groups for the convenience of our customers which are
as below :
Normal Velocity : (7 to 9 m/sec. ) air curtain of this range generally used for internal doors, windows and such spaces where
the outside wind velocity is not very high.
High Velocity : (10 to 12 m/sec. ) this is the most popular range of velocity for the air curtains required by the customers. This is
used for internal as well as external doors.
Extra Velocity : (13 to 15 m/sec. ) air curtains in this velocity range are used for external door where outside wind velocity is
very high or where it is very important that no dust insects or flies should enter.
Special Purpose : ( 13 m/sec or above). these air curtains are special purpose type and are made according to specific
requirements of valued customers. These are ideally suited for dairies, food processing units or other application where it is
extremely important that no outside air should enter the premise.
Technical Specifications
Cabinets Material Used :
(a) Cold Rolled Mild Steel : 16 swg for base plate.
18 swg for body
20 swg for grilies
(b) Galvanised Iron Sheet: 20 swg for blower housing.
Interior Finish: anti rust treatment primer paint.
Exterior Finish: power coating
Fan & Motors: the multiblade forward curved centrifugal type al. Fan dynamically balanced are driven by extended motor shaft.
APPLICATION : air curain have numerous uses right from cutting down the elericity bills to prevention of entry of unwanted
insects,files,hot,humid air etc, & popularly used by offices departmental stores,garment manufactures,cold
storage,hotel,rrestaurants,kitchens,bakeries,dairiesa
pharmaceutical plants, taxtile mills,cement plants; and all those industries where surrounding air contains high dust
concentrations such as coal andlight mines, steel plants, foundries cement plant and other similar industries.
How To Order: while sending your requirements or for enabling us to suggest suitable air curtains,
please send us the following information:
1. Size of door.
2. Clear space available above and sides of door opening.
3. Frequency of door.
4. Purpose for which your place is being used.
5. Position of door and appropriate wind velocity.
Page 10
Impellers / Cast Iron Impeller / Aluminum Impellers
We facilitate our clients with Impellers that help fans/blowers to exhaust and supply air, gas, fume and dust in various industry
processes. Manufactured using high grade raw material, our range is known for steady construction and durability. Our
aerodynamically balanced range is high in efficiency and can be availed at industry leading price.
Our range includes:
· Backward curved bladed Impeller
· Forward carved bladed Impeller
· Straight radial bladed Impeller
· Backward inclined Aerofoil blades Impeller
· Impellers of Limit Load Fan (LL Fan)
· Single Inlet type dia 2800 mm impeller
Cooling Coil Heating Coil
Page 11
enviro tech chilled water cooling coils are one of the most advanced & highly efficient super slit finned cooling coil & are
available in 5/8’’ { 15. 8 }, ½’’ OD { 12. 5 mm } 3/8’’ OD { 9. 5 mm }
COILS : they are manufactured from annealed & seamless copper tubes.
FINS : aluminium used for fins are super slit fins. Copper tubes are hydraulically / echanically expanded within fin collars to
from permanent bond between fin & tube.
HEADERS : m. S. Seamless pipe or copper pipe of heavy gauge
CASING : end covers, top & bottom channels are manufactured of 16 gauge of g. I sheets for protection & long life. Venting &
draining system: the coils require only one drain & one vent. The drain & vent fittings are conveniently located externally on
the inlet & outlet connections. Individual circuits have no high spots to trap water during the draining process.
TESTING : all coils are tested at 300 psig pneumatic pressures under water for leakage test.
SIZE : chilled water cooling coil : 4 / 6 / 8 row, dx cooling coil: 4 / 6 / 8 row,heat transfer coil : 2 / 3 row
Our range includes:
• Chilled Water Coils. Water Coils. We provide chilled water coils which is primarily used in the plus temperature cold
rooms and chilled water is used as the refrigerant. Sourced from reliable vendors, we use good quality of 1/2" copper tube in
the production of our gamut. This chilled water coil is completed with: Cabinet,Fans,Drain tray,Ceiling suspension tray.
• Electronic Coils. Industrial Coils. Available with us is a wide range of best quality special industrial heat exchangers,
that are known amongst clients for efficient properties, long functional life and low operational cost. We manufacture these
industrial heat exchangers keeping into consideration the set industrial parameters. Ammonia Coils. We supply ammonia
coil which is renowned among our valued clients for its effectual functioning. This coil is appropriate for the ice plant up to 50
tonne ice capacity per day. Procured from genuine vendors, we use good quality of raw material in the production of our
gamut. The raw material includes 1 1/2' C class and ISI duty ERW tubes. These are heavy duty receivers which are
fabricated with the MS plate and have good molding. Furthermore, it is manufactured in accordance with international
standards and is delivered within specified time frame.
• Stainless Steel Coils/Stainless Steal Heat Exchanger
• We manufacture and supply superior grade stainless steel coils, which find application in engineering,
construction, casting, forging and many other activities. They are also used for fabricating various instruments and
equipment. Our SS coils are highly durable and resistant to heat. Available in varied diameters and length, these
coils can withstand any amount of stress.
• Steam Coils. We offer steam coils which are highly appreciated among our valued clients for its simple configuration
and abrasion resistant features. These are extensively used in varied industrial applications and are offered in varied
specifications, which match the entire casing of original unit. These heating coils are primarily used in: Steam,Water pre
heat,Re heat,Boosters.The cooling coils are used in chilled water, brine, Freon, ammonia, glycol and other liquids.
Furthermore, these are manufactured in accordance with international standards and are delivered within specified time
frame.
Page 12
TERMS & CONDITIONS:
1. Prices are EX – WORKS Delhi Forwarding, Transport, & special packing Charges extra
2. Sales – tax and other duties are extra.
3. Prices are subject to change without notice.
4. Payments – 50% Advance and Balance against delivery at works.
5. Our risk & responsibility ceases on delivery of the goods to the carriers.
Thanking you, and looking for an early feedback.
Yours faithfully,
For Enviro Tech Industrial Products.
CONTACT DETAILS :
ENVIRO TECH INDUSTRIAL PRODUCTS
OFFICE:-A-12,Basement, Pandav Nager Complex, Ganesh Nager, Near
Aggarwal Sweet, Delhi-110092.
Phone : (O) +91-22483365
Phone : (F) +91-22083434
Tel-Fax: (O) +91-22083434
E-mail : [email protected] .
: [email protected]
: [email protected]
Contact Person Mr. R.P.SHARMA.
Mobile: 9871034100,9868958924,9650264867,9716640145
