Date post: | 28-Mar-2015 |
Category: |
Documents |
Upload: | allyson-prust |
View: | 215 times |
Download: | 3 times |
Air Intake Filters Are Manufactured By:Air Solution and Newway Companies, Commerce Twp, MI 48382
www.airsolutioncompany.comUnited States and Foreign Patents Granted - This product is protected under one or more of the following U.S. and foreign patents: 5,370,722 ● 5,529,593 ● 6,197,077 B1 ● 2170244 ● 95904185.6-2113, Other Patents Pending
Mountain Aire LLCColesville, MD
Delivering the Best in Air Intake Filtration Technology
The Product LineFilter Media
Fine Mesh FilterThis mesh is specifically designed to help alleviate problems associated with excessive dust. This is an electrostatic filter which will load faster then the
engineered HVAC Mesh.
Not recommended in cottonwood seed zones unless accompanied by excessive dust
Engineered HVAC Mesh FilterThis mesh is specifically engineered to stop debris which typically causes fouling of condenser coils, cooling towers and other HVAC systems. This
mesh is non-electrostatic and is constructed with a non-porous vinyl coated polyester.
Keeps Most Insects Out Of Your System
Engineered HVAC Mesh For Commercial & Industrial Grades
House FlyMosquitoGnat
Stops Airborne Debris Before It Fouls & Clogs HVAC and
Cooling Tower Systems
“This is the stuff that will plug your equipment”
Stops cottonwood seed and other airborne debris on the outside of the equipment where it is easy to see and clean
Stops Cottonwood SeedBefore It Can Cause Trouble
Amazingly Easy To Clean The Engineered HVAC Mesh Filters are constructed with bonded fibers and a non-porous vinyl
surface coating that helps prevent debris adhesion and entanglement thus making cleaning quick and easy – Cleans easier than removing lint from a cloth dryer lint catcher!
So easy you can remove it with your hand.
Broom or Brush
Garden Hose
Shop Vacuum
Even the rain will clean the filter
Air Intake Filter Applications
Rooftop Units Condenser Units Air Cooled Chillers Dry Coolers
Air Handling Units LouversCooling Towers
Air Intake Filters Are Manufactured By: Air Solution and Newway Companies, Commerce Twp, MI 48382 United States and Foreign Patents Granted - This product is protected under one or more of the following U.S. and foreign patents: 5,370,722 ● 5,529,593 ● 6,197,077 B1 ● 2170244 ● 95904185.6-2113, Other Patents Pending
Fastening Systems
Air Intake Filters Are Manufactured By: Air Solution and Newway Companies, Commerce Twp, MI 48382 United States and Foreign Patents Granted - This product is protected under one or more of the following U.S. and foreign patents: 5,370,722 ● 5,529,593 ● 6,197,077 B1 ● 2170244 ● 95904185.6-2113, Other Patents Pending
Grommets with Self-tapping Screws & Bonded Washers
Avail. On Fine Mesh and Commercial Grade HVAC Mesh with 1” Fiber
Reinforced Outer Binding
Nylon Turn Stud Fasteners
Avail. On Fine Mesh and Commercial Grade HVAC Mesh with 1” Fiber
Reinforced Outer Binding
Slide Mount System with Cable Mounting
Avail. Industrial Grade HVAC Mesh Only
Heavy Duty, Self-tapping Stud Adapter Fasteners
Avail. On Industrial Grade HVAC Mesh and Fine Mesh Filters with
2.25” Fiber Reinforce Outer Binding
Pulley Mount Filter with Cable and Pulley Operation
Avail with galvanized. storage unit, vinyl cover or Velcro bundle straps
Features Non-porous vinyl coated polyester media (Commercial & Industrial)
Specifically engineered for high volume / high velocity airflow with low static pressure impact – Less than 1/10” W.G. at 600 FPM
Low Air Friction Coefficient - Nearly Invisible to the airflow.
Bonded Fibers – Ensures uniform airflow, prevents entanglement of debris, prevents running or unraveling of fibers if punctured.
Extremely Strong & Durable
UV Resistant,
Low Debris Adhesion
Resists mold & mildew
Flame resistant (Self-extinguishing)
Multiple Fastening Options
Filter storage unit (*optional).
Sizes to fit every air intake opening.
2 year factory warranty on filter media. (Up to 15 year Service Life)
Advantages Air Intake Filters significantly change the dynamics of the maintenance process by
enabling the management of airborne debris on the outside of cooling towers and HVAC equipment where it is easily seen and removed, rather than contending with excessive maintenance and downtime associated with removing debris when it gets inside of the equipment.
Can Significantly Reduce Energy Cost – equipment runs efficiently.
Reduces Cleaning Effort Up To 75% - a few quick swipes of a broom, brush, shop vacuum or rinse with a garden hose – Even rain washes filters.
Eliminates / Significantly Reduces Power Washing.
Environmentally Friendly – Reusable Filters Reduce / eliminates coil cleaning solvents, helps reduce chemical consumption in cooling towers by eliminating bio-loads in the system.
Helps Companies Conform to State & Local EPA Recommendations and Guidelines calling for reductions in chemical usage.
BenefitsCooling Tower Applications ■Prevents clogging of fill material (extends fill life). ■Prevents Sludge Build-up in water basins. ■Prevents clogging of sump and in-line strainers, blow-down valves and heat exchangers. ■Helps fight bacterial proliferation (eliminates nutrient source). ■Diffuses sunlight to help fight algae growth. ■Helps increase water treatment chemical effectiveness. ■Reduces maintenance cycle time by up to 50%. ■Eliminates Downtime due to fouling & clogging.
Condensers & Air Cooled Chiller Applications ■Helps protect against hail damage. (hail guard frames required)■Helps prevent coils / fins from clogging. ■Significantly reduces / eliminates damage due to power washing & solvents). ■Helps optimize cooling efficiency■Saves maintenance time & energy
Air Handling Units & Louver Applications ■Prevents "blanketing" of internal filters. ■Enables optimum efficiency of internal filters. ■Protects louver actuators■Helps improve indoor air quality. ■Significantly reduces maintenance cost.
Air Conditioners
Baird Wall Mount Air Conditioning
Rooftop Units
Protects fouling of Split Coil Rooftop Units
Rooftop Unit
Triangular Shaped Filter - commercial grade filters with nylon turn stud fasteners
Air Cooled Condenser Units
Trane CGAFC60 Condenser Unit
Condenser Units
Mitsubishi air cooled condenser with Commercial Grade Air Intake Filter and Turn-stud Fasteners.
Dry Coolers
Industrial Grade Filters w/
Stud Adapter Fasteners
Industrial Grade Filters w/
Slide Mount Fasteners
Industrial Dry Cooler
Industrial Grade Filters With Stud Adapter Fastener Skirting the Legs – Bottom of Filter
Fastens to Angle Iron Which Extends from Leg to Leg at Grade Level.
Air Cooled Chillers
Commercial Grade Filters With Turn Stud Fasteners and Slide-Mount Access Panel
Air Cooled Chillers
Commercial Grade Filter with Velcro Fastening
Air Cooled Chiller
RTAA Air Cooled Chiller with Industrial Grade Air Intake Filter and Stud Adapter Fasteners
Air Cooled Chiller
Industrial Grade Air Intake Filter With Stud Adapter Fasteners Filter is cut and fitted around the water lines –
clips lock the cut sections back together
Air Cooled Chiller
Air Cooled Chiller
Industrial Grade Filter with Slide Mount Filters
Air Cooled Chiller
Trane RTAA 400 Ton chiller Before Filtration
Chiller with Industrial Grade Filter with stud adapter
fastening
photo shows effect of rain in cleaning the filter - notice how cottonwood seed has been washed toward the bottom of the filter - As rain continues, it can completely clean the filter.
Air Cooled Chiller
Industrial Grade Filters and Stud Adapter Fasteners with Weighted Bottom Pocket
Resting on Rooftop
Rooftop Unit with Hail Guard Protection
Industrial Grade Filters with Hail Guard Stand-off Frames Provides Day to Day Air Intake Filtration and Protection From The
Occasional Hail Storm – Hail Guard Frames Move Filter 3”+ Away From the Coil – Deflecting Hail and Preventing Coil Impact.
Air Cooled Chiller
Industrial Grade Filter with Stud Adapter Fasteners and Hail Guard Stand-off Frames
Hail guard stand-off frames
Weighted filter pocket holds galvanized pipe as weight to hold
filter down to rooftop
Economizer Units
Trane Intellipak Unit with Industrial Grade Filters with Stud Adapter Fasteners – Protects Condensers and helps Prevent
Compressor Failure
Air Handling Units
Commercial Grade Filter with Nylon Turn Stud Fasteners
Industrial Grade Filter with Slide Mount Filter & Galv.
Storage Box
Fresh Air Intake Bonnet
Industrial Grade Filter with Stud Adapter Fasteners
Penthouse Air Handling Units
Pulley Mount Air Intake Filter with Integrated Galvanized Storage Unit
Vertical Air Flow Intakes
Grate Filters
Cooling Tower
BAC Single Cell Cooling Tower With Industrial Grade Stud Adapter Fasteners
Before After
Cooling Tower
Face Back
Industrial Grade Filter with Stud Adapter Fasteners
Cooling Tower
Front Back
Marley NC8310 cooling tower with Industrial Grade Air Intake Filer with Galvanized Storage Unit for storing filter during freezing winter climates.
Optional Galvanized Storage Box
Field Erected Cooling Tower
BAC 300 Series Cooling Tower with Industrial Grade Filter and Stud Adapter Fasteners
Cooling Tower
Marley Cooling Tower with Industrial Grade Pulley Mount Air Intake Filter
Cooling Tower
Cooling Tower
Marley Aqua-tower with Industrial Grade Filter & Stud Adapter Fasteners
Cooling Tower
Cooling Tower
Marley Quadraflow Cooling Tower with Pulley Mount Air Intake Filer System
Cooling Towers
Evapco Cooling Tower with Industrial Grade Filter and Stud Adapter Fasteners
Louver Panels
Compatible with the Best Mechanical Equipment in the Business
Nearly Every Industry Segment
IBM
Fruit Valley
Elementary School
HoneywellIBM
Fruit Valley
Elementary Shool