FACTSHEETSlideJet-DT15-2.Air interlacing for draw-twisting/winding
English
The SlideJet-DT15-2 is used in the high-quality manufacturing and processingof high value flat yarns. The jet is a modular system with a universal quick-lock housing and numerous easily replaceable jet inserts.
SlideJet-DT15-2
Air interlacingIn air interlacing, an air blast is used to mechanically intermingleindividual yarn filaments together. The resulting interlacing knotsprovide the required yarn compactness. This allows higher pro-cessing speeds, resulting in improved package build and a re-duced number of filament and yarn breaks during subsequentprocesses.
2
HEBERLEIN® SlideJet-DT15-2.Interlacing of flat yarns with lowest air consumption
Features and Benefits
• All jet inserts with the lowest air consumption
• The cutting-edge jet insert technology ensuresimproved interlacing
• Pushbutton mechanism for easy housing lockingand unlocking
• Jet inserts without screws; the jet plates connectto the slider with a bayonet lock
• Coloured sliders make it easy to identify jet plates
• The ceramic jet plates guarantee wear-resistant,long-lasting use
• Easy maintenance and cleaning
Performance values
Type Ø-air channel
[mm]
Count 1 knitting,weft yarns
[dtex]
Count 1
warp yarns[dtex]
Singlecount 1
[dtex]
Airconsumption 2
qvn [m3/h]
Number of in-terlacing knots 1
[FP/m]
Length of in-terlacing
knots 1
Interlacingstability 1
Normal interlacing, for microfilament yarns
P132-2 1.1 … 167 … 110 … 3.5 0.562 (pe+1) … 75 short weak
P133-2 1.2 … 220 … 167 … 4.0 0.689 (pe+1) … 70 short weak
P231-2 1.4 … 330 … 230 … 4.5 0.911 (pe+1) … 60 medium medium
P232-2 1.7 … 660 … 400 … 6.0 1.343 (pe+1) … 50 medium medium
P331-2 2.2 … 1200 … 900 … 7.0 2.250 (pe+1) 30 … 45 long medium
P431-2 2.8 … 2400 … 1600 … 12.0 3.644 (pe+1) 30 … 40 long medium
High interlacing stability at higher processing speeds
P235-2 1.4 … 330 … 230 … 4.5 0.911 (pe+1) … 70 medium high
P236-2 1.6 … 520 … 350 … 5.5 1.189 (pe+1) … 65 medium high
1 Guide values: depends on the properties of the yarn, the machine settings, and the yarn guides (den = 0.9 x dtex)
2 Under standard conditions according to DIN 1343: temperature = 0 °C, pressure = 1.01325 bar, relative humidity = 0 %, 1 standard cubic metres = 1.293 kg (psi = 14.7 x bar, CFM= 0.588 x m3/h)pe = overpressure [bar], qvn = air consumption [m3/h]
Dimensions and weight
26
25.5
19.535
3774.5
Weight 180 g (without nipple), mass in mm
Design variant
SlideJet-DT15-2 with yarn guide
Compressed air requirements– Overpressure: 1.0 … 6.0 bar
– Max. residual oil: 0.1 mg/m3(class 2*)
– Max. residual particles: (class 2*)– Particle size 1 µm– Particle density 1 mg/m3
– Max. residual water: (class 5*)– Residual water 7,732 g/m3
– Pressure dew point + 7 °C
* Quality class according to DIN ISO 8573-1
3
HEBERLEIN® SlideJet-DT15-2.Technical Data
4
Heberlein AGBleikenstrasse 11, 9630 Wattwil, SwitzerlandT +41 71 987 44 44, F +41 71 987 44 45, [email protected], www.heberlein.comSubject to change without prior notice.This product is protected by intellectual property rights (patent, design protection); further information is available at www.heberlein.com.
Revi
sion
sta
tus
v 1.1
701.2
2051
7