Electrical feed andcanopy kit and cable
Design Carlotta de Bevilacqua, Paola di Arianello
SYSTEM CONFIGURATION EXAMPLE
LAYOUTALGORITMO SHARPING SYSTEM - SUSPENSION
Compose your system with the help of the example below. All components can be found on the following pages and need to be ordered separately.
Suspensioncable
Page: 1/6
Algoritmo Sharping Recessed with Trim
Module(4 or 8 foot)
Sharping Louvers and Covers
Algoritmo SharpingGear Plate
(4 or 8 foot)
1
2
3
Linear Joiner and Cable kit
acc
End Cap(2 per kit)
acc
acc
acc
Pick your Algoritmo Suspension BodyPick your Sharping Gear PlatePick your corresponding Louvers and CoversPick your accessories
123
acc
We reserve the right to change specifications of our products (designs, materials and finishes).For the latest product information, please contact: USA: 631-694-9292, Canada: 514-323-6537 or at www.artemide.net
2018 © Artemide | All rights reserved
Date Rev.04
: March 12th 2018
QUANTITY
CODE
Construction: Modular structural body in extruded aluminum with powder coat finish.
Mounting: Mounts to ceiling (hardware not included). Suspension cables, Gear Plates, Louvers and Covers and other accessories sold separately. Electrical feed kit, end caps and joiners sold separately; see following pages.
Notes: For all other finishes, lengths and custom requests, please contact your local Artemide sales representative.
FEATURES:
Design Carlotta de Bevilacqua, Paola di Arianello
#CAT
USC-MAL
MOUNTING
S
Length 4 = 4 Feet
S = Suspension mountMounting
8 = 8 Feet
LENGTH
___
BODY
Page : 2/6
EMISSION
___
B = BlackBody colorS = SilverW = White
ALGORITMO SHARPING SYSTEM - SUSPENSION
4FT 8FT46 5/8” 93 1/4”
1184 mm 2368 mm
1 9/16”40 mm
1 3/4”45 mm
4 5/16”110 mm
Emission D = DirectB = Direct + Indirect Combination*
*Must select matching Direct + Indirect Combination Gear Plate on following page.
COLOR
___
We reserve the right to change specifications of our products (designs, materials and finishes).For the latest product information, please contact: USA: 631-694-9292, Canada: 514-323-6537 or at www.artemide.net
2018 © Artemide | All rights reserved
Date Rev.04
: March 12th 2018
ALGORITMO SHARPING SYSTEM - SUSPENSIONDesign Carlotta de Bevilacqua, Paola di Arianello
Length 4 = 4 Feet
CRI
CCT30 = 3000K
G = Gear PlateType
(8 Feet on next page)
9 = 90 CRI min
08 = On/Off + 0-10V dim (120/277V)Driver
DU = DALI (120/277V)
4FT GEAR PLATE
Page : 3/6
35 = 3500K
15 = On/Off + 0-10V dim (347V)
D = DirectEmission
2x4 spot cluster pattern
3x4 spot cluster pattern
Market _ = United States (leave blank)C = Canada***
*Optics not selectable on Indirect portion; comes in clear frosted only, and 80CRI LEDs. See data below.**2700K not available in Direct + Indirect Combination***Canadian models contain LED covers to comply with voltage regulations; output decreased by 10%.
Beam A = Spot 17°B = Flood 34°C = Wide Flood 54°
QUANTITY
CODE
#CAT
USC-MAS
TYPE
G
DRIVER
___
CRI CCT
___
LENGTHEMISSION
9
BEAM
___4
MARKET
___
PATTERN
___
Pattern 2 = 2x43 = 3x4
B = Direct + Indirect Combination*
___
Input Power: 25W
Nominal Lumen:Delivered Lumen
Efficacy (lm/W):
2043lm
1547lm
61.9lm/W
4FT DIRECT EMISSION
3064lm
1448lm 1499lm
Efficiency (%): 75.7%
57.9lm/W
70.9%
60.0lm/W
73.4%
Input Current: 120VAC 277VAC
0.21A 0.09A
2321lm
61.1lm/W
2171lm 2249lm
75.7%
57.1lm/W
70.9%
59.2lm/W
73.4%
120VAC 277VAC
0.32A 0.14A
See page 5 for optics specifications and description.
Pattern: 2x4 3x4
Spot (17°) Flood (34°) Wide (54°) Spot (17°) Flood (34°) Wide (54°)
38W
Label Canadian Market: - suitable for dry locations
Label United States Market: - suitable for dry locations
TECHNICAL DATA:
Lamping: Aluminum gear plate with LED driver and high-power LED, 90CRI minimum, 2-step MacAdam ellipse
Notes: Max rating for cumulative gear plates in a system: 6A per circuit. For custom requests, please contact your local Artemide sales representative.
(90 CRI 3000K US model ratings)
53W
2043lm (direct), 3215lm (indirect)
1547lm
75.9lm/W
4FT DIRECT+INDIRECT EMISSION
3064lm (direct), 3215lm (indirect)
1448lm 1499lm
76.5%
74.0lm/W
74.6%
75.0lm/W
75.6%
120VAC 277VAC
0.44A 0.19A
2321lm
74.9lm/W
2171lm 2249lm
76.4%
72.6lm/W
74.0%
73.8lm/W
75.2%
120VAC 277VAC
0.53A 0.23A
2x4 3x4
Spot (17°) Flood (34°) Wide (54°) Spot (17°) Flood (34°) Wide (54°)
64W
27 = 2700K**
40 = 4000K
Direct:Indirect: 2475lm 2475lm
ALGORITMO SHARPING SYSTEM 90CRI 3000K, White Louver, US model
2 7/8”73 mm
46 9/16”1183 mm
1 1/2”38 mm
7/8”23 mm
35 7/8”911 mm
Direct + Indirect Combination only:
We reserve the right to change specifications of our products (designs, materials and finishes).For the latest product information, please contact: USA: 631-694-9292, Canada: 514-323-6537 or at www.artemide.net
2018 © Artemide | All rights reserved
Date Rev.04
: March 12th 2018
ALGORITMO SHARPING SYSTEM - SUSPENSIONDesign Carlotta de Bevilacqua, Paola di Arianello
8FT GEAR PLATE
4x4 spot cluster pattern
6x4 spot cluster pattern
Length 8 = 8 Feet
CRI
CCT
G = Gear PlateType
(4 Feet on previous page)
9 = 90 CRI min
08 = On/Off + 0-10V dim (120/277V)Driver
DU = DALI (120/277V)15 = On/Off + 0-10V dim (347V)
D = DirectEmission
Market _ = United States (leave blank)C = Canada***
Beam A = Spot 17°B = Flood 34°C = Wide Flood 54°
QUANTITY
CODE
#CAT
USC-MAS
TYPE
G
DRIVER
___
CRI CCT
___
LENGTHEMISSION
9
BEAM
___8
MARKET
___
PATTERN
___
Pattern 4 = 4x46 = 6x4
Page : 4/6
B = Direct + Indirect Combination*
___
Input Power: 50W
Nominal Lumen:
Efficacy (lm/W):
4085lm
Spot (17°)
3094lm
61.9lm/W
8FT DIRECT EMISSION
6128lm
Flood (34°) Wide (54°)
2895lm 2998lm
Efficiency (%): 75.7%
57.9lm/W
70.9%
60.0lm/W
73.4%
Input Current: 120VAC 277VAC
0.42A 0.18A
4641lm
66.3lm/W
4343lm 4497lm
75.7%
62.0lm/W
70.9%
64.2lm/W
73.4%
120VAC 277VAC
0.58A 0.25A
See page 5 for optics specifications and description.
Pattern: 4x4 6x4
70W
Spot (17°) Flood (34°) Wide (54°)
104W
77.4lm/W
8FT DIRECT+INDIRECT EMISSION
76.5%
75.4lm/W
74.6%
76.4lm/W
75.6%
120VAC 277VAC
0.87A 0.38A
77.4lm/W
76.4%
75.0lm/W
74.0%
76.2lm/W
75.2%
120VAC 277VAC
1.03A 0.45A
4x4 6x4
Spot (17°) Flood (34°) Wide (54°) Spot (17°) Flood (34°) Wide (54°)
124W
4085lm (direct), 6430lm (indirect) 6128lm (direct), 6430lm (indirect)
30 = 3000K35 = 3500K
27 = 2700K**
40 = 4000K
Label Canadian Market: - suitable for dry locations
Label United States Market: - suitable for dry locations
TECHNICAL DATA:
Lamping: Aluminum gear plate with LED driver and high-power LED, 90CRI minimum, 2-step MacAdam ellipse
Notes: Max rating for cumulative gear plates in a system: 6A per circuit. For custom requests, please contact your local Artemide sales representative.
(90 CRI 3000K US model ratings)
3094lm 2895lm 2998lm 4641lm 4343lm 4497lm
Delivered LumenDirect:
Indirect: 4951lm 4951lm
*Optics not selectable on Indirect portion; comes in clear frosted only, and 80CRI LEDs. See data below.**2700K not available in Direct + Indirect Combination***Canadian models contain LED covers to comply with voltage regulations; output decreased by 10%.
ALGORITMO SHARPING SYSTEM 90CRI 3000K, White Louver, US model
2 7/8”73 mm
93 3/16”2367 mm
1 1/2”38 mm
7/8”23 mm
82 7/16”2094 mm
Direct + Indirect Combination only:
We reserve the right to change specifications of our products (designs, materials and finishes).For the latest product information, please contact: USA: 631-694-9292, Canada: 514-323-6537 or at www.artemide.net
2018 © Artemide | All rights reserved
Date Rev.04
: March 12th 2018
ALGORITMO SHARPING SYSTEM - SUSPENSION
Page: 5/6
Design Carlotta de Bevilacqua, Paola di Arianello
SPOT OPTICS (17°)
Injection-molded metallized polycarbonate reflector for precise optics. Provides a narrow controlled beam (17 degrees) for precise spotlights.
FLOOD OPTICS (34°)
WIDE FLOOD OPTICS (54°)
DIRECT BEAM OPTIONS
PHOTOMETRY
TO BE UPDATED
Injection-molded metallized polycarbonate reflector for precise optics. Provides a wider controlled beam (34 degrees) for best balance between lumen and coverage.
Injection-molded metallized polycarbonate reflector for precise optics. Provides the widest controlled beam (54 degrees) for maximum coverage.
PHOTOMETRY
TO BE UPDATED
PHOTOMETRY
TO BE UPDATED
QUANTITY#CAT
USC-MASC
PATTERN
___
2 = 2x4 (4FT only)Pattern3 = 3x4 (4FT only)
LOUVERS AND COVERS
Select the Louver/Cover combination that matches your pattern choice.
COLOR
___
B = Black*Cover/Louvercolor W = White
Injection-molded louvers for 4-spot cluster; extruded polycarbonate snap-in interstitial covers, black or white color.
*Black Louver has a 1% lumen output decrease over the White Louver, see photometry documentation for precise values.
4 = 4x4 (8FT only)6 = 6x4 (8FT only)
Louver
Cover
COVERS
INDIRECT OPTICS
Indirect light engine provides illumination above the fixture on Direct+Indirect models (”B” emission), on same circuit. Extruded polycarbonate diffuser with a clear frosted finish for maximum light output. 80CRI+ LED chips, 3-step MacAdam ellipse.
(DIRECT + INDIRECT MODEL MUST BE SELECTED)
Max Candela = 470.35cd/klm3000k 80CRI min.
60120
180
240
90°
105°
120°
135°150°
165°180°
INDIRECT DISTRIBUTION
We reserve the right to change specifications of our products (designs, materials and finishes).For the latest product information, please contact: USA: 631-694-9292, Canada: 514-323-6537 or at www.artemide.net
2018 © Artemide | All rights reserved
Date Rev.04
: March 12th 2018
Page: 6/6
Design Carlotta de Bevilacqua, Paola di Arianello
ACCESSORIESALGORITMO SHARPING SYSTEM - SUSPENSION
QUANTITY
ELECTRICAL FEED AND CANOPY COVER KIT FOR SUSPENSION MODULES (WHITE)
#CAT
USC-MALSFK
QUANTITY
END CAP KIT FOR MODULES (SET OF 2)
Allows capping of the ends of linear module runs. Color-matched to body.
#CAT
USC-MALEC
COLOR
___
B = BlackColorS = SilverW = White
QUANTITY
SUSPENSION CABLE
#CAT
USC-MALSC
QUANTITY
LINEAR JOINER AND CABLE KIT FOR SUSPENSION MODULES
Allows mechanical connection of 2 units in a linear configuration, as well as suspending this junction point to the ceiling by cable.
#CAT
USC-MALLJK
LENGTH
___
6 = 6 Feet (183 cm)Length15 = 15 Feet (457 cm)
6 = 6 Feet (183 cm)Length15 = 15 Feet (457 cm)
Steel cable to mount suspension modules to the ceiling. Modules must be held with a suspension cable at both ends.
LENGTH
___
Length
LENGTH
___
Allows electrical connection of a suspension module over a standard junction box with a white cover. Max number of modules per feed must not exceed 6A. Includes steel suspension cable for mounting.
6 = 6 Feet (183 cm)15 = 15 Feet (457 cm)
We reserve the right to change specifications of our products (designs, materials and finishes).For the latest product information, please contact: USA: 631-694-9292, Canada: 514-323-6537 or at www.artemide.net
2018 © Artemide | All rights reserved
Date Rev.04
: March 12th 2018