Volvo Menu

Perfect Power Wiring Diagrams

Volvo Menu

To return to the Main Menu, click here

Volvo Wiring Diagrams

Model ECU LocationS/V40 2.0 Turbo (B4204T3,B4204T5) - Siemens EMS 2000 - 2000-02

240 2.0i (B200F) - Bosch LH 2.4 Jetronic - 1991-93

S80 2.4 (B5244S,B5244S2) - Denso - 1998-02

S60 2.4 (B5244S,B5244S2) - Denso - 2000-02

S/V/70 2.3 (B5234FS) - Denso - 1999

S/V/C70 2.4 (B2544S,B5244S2) - Denso - 2000-02

S/V/C70 2.5 (B5254S) - Denso - 1999

V70 5cyl Turbo - -

850 2.0 Turbo (B5204T/T2/T3/B5234T) - Bosch Motronic 4.3/4.4 - 1993-97

850 2.3 Turbo (B5204T/T2/T3/B5234T) - Bosch Motronic 4.3/4.4 - 1993-97

850 2.3 R/T-5R (B5234T4/T5) - Bosch Motronic 4.3/4.4 - 1994-97

850 2.0i 10V (B5202S) - Bendix Fenix 5.2 - 1995-97

850 2.5/Turbo (B5254S/T) - Bosch Motronic 4.3/4.4 - 1996-97

S/V/C70 2.0 Turbo (B5204T/T2/T3) - Bosch Motronic 4.3/4.4 - 1997-99

S/V/C70 2.3/Turbo (B5234T/T3/T4/T6/T7/FS) - Bosch Motronic 4.3/4.4 - 1997-01

S/V/C70 2.5 20V/Turbo (B5254S/T) - Bosch Motronic 4.3/4.4 - 1997-00

850 2.5i 20V (B5254FS) - Bosch LH 3.2 Jetronic - 1991-97

850 2.0i 20V (B5204FS) - Bosch LH 3.2 Jetronic - 1991-97

850 2.5i 10V - Bendix Fenix 5.2 - 1993-97

S/V70 2.0i 10V - Bendix Fenix 5.2 - 1997-99

S/V70 2.5i 10V (B5252S) - Bendix Fenix 5.2 - 1997-99

960 2.5i 24V (B6254F) - Bosch Motronic 4.4 - 1996-97

960 3.0i 24V (B6304F) - Bosch Motronic 4.4 - 1996-97

B230FT - LH-Jetronic 2.2 - 1989

850 2.4L - - 1995

740/760 2.3i Turbo (B230FT) - Bosch LH 2.2 Jetronic - 1990-91

760 2.8i (B280E/F) - Bosch LH 2.2 Jetronic - 1986-91

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvomenu.htm (1 of 2) [2004/03/25 11:02:39]

Volvo Menu

240 2.3i (B230FD) - Bosch LH 2.4 Jetronic - 1993-94

740 2.0i/2.3i 16V (B200F/B234F) - Bosch LH 2.4 Jetronic - 1990-91

940 2.0i/Turbo (B200F/T) - Bosch LH 2.4 Jetronic - 1991-95

940 2.3i/16V/Turbo (B230FB/B234F/B230FK) - Bosch LH 2.4 Jetronic - 1990-95

940/960 Turbo 2.3i (B230FT) - Bosch LH 2.4 Jetronic - 1990-98

240 2.3i (B230F0) - Bosch LH 2.2 Jetronic - 1984-90

440/460/480 1.7i Turbo (B18FT(M)) - Bosch LH2.2 Jetronic - 1988-96

S/V90 3.0i 24V (B6304F/S1/S2) - Bosch Motronic 4.4 - 1997-98

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvomenu.htm (2 of 2) [2004/03/25 11:02:39]

Volvo - S/V40 2.0 Turbo (B4204T3,B4204T5) - 2000-02

Perfect Power Wiring Diagram

ECU make: Siemens EMS 2000 Vehicle make: VolvoModel: S/V40 2.0 Turbo (B4204T3,B4204T5)

Year: 2000-02

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 60Teeth per firing 30Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:895 Ref:Volvo406.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo406.htm [2004/03/25 11:03:07]

Volvo - 240 2.0i (B200F) - 1991-93

Perfect Power Wiring Diagram

ECU make: Bosch LH 2.4 Jetronic Vehicle make: VolvoModel: 240 2.0i (B200F)

Year: 1991-93

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 2Teeth per firing 1Modes 10System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:896 Ref:Volvo740.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo740.htm [2004/03/25 11:03:10]

Volvo - S80 2.4 (B5244S,B5244S2) - 1998-02

Perfect Power Wiring Diagram

ECU make: Denso Vehicle make: VolvoModel: S80 2.4 (B5244S,B5244S2)

Year: 1998-02

Comments: RPM readings double

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 10Teeth per turn(incl miss) 60Teeth per firing 12Modes 1System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:897 Ref:Volvo664.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo664.htm [2004/03/25 11:03:12]

Volvo - S60 2.4 (B5244S,B5244S2) - 2000-02

Perfect Power Wiring Diagram

ECU make: Denso Vehicle make: VolvoModel: S60 2.4 (B5244S,B5244S2)

Year: 2000-02

Comments: RPM readings double

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 10Teeth per turn(incl miss) 60Teeth per firing 12Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:898 Ref:Volvo660.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo660.htm [2004/03/25 11:03:14]

Volvo - S/V/70 2.3 (B5234FS) - 1999

Perfect Power Wiring Diagram

ECU make: Denso Vehicle make: VolvoModel: S/V/70 2.3 (B5234FS)

Year: 1999

Comments: RPM readings double

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 10Teeth per turn(incl miss) 60Teeth per firing 12Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:899 Ref:Volvo661.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo661.htm [2004/03/25 11:03:16]

Volvo - S/V/C70 2.4 (B2544S,B5244S2) - 2000-02

Perfect Power Wiring Diagram

ECU make: Denso Vehicle make: VolvoModel: S/V/C70 2.4 (B2544S,B5244S2)

Year: 2000-02

Comments: RPM readings double

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 10Teeth per turn(incl miss) 60Teeth per firing 12Modes 1System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:900 Ref:Volvo662.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo662.htm [2004/03/25 11:03:18]

Volvo - S/V/C70 2.5 (B5254S) - 1999

Perfect Power Wiring Diagram

ECU make: Denso Vehicle make: VolvoModel: S/V/C70 2.5 (B5254S)

Year: 1999

Comments: RPM readings double

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 10Teeth per turn(incl miss) 60Teeth per firing 12Modes 1System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:901 Ref:Volvo663.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo663.htm [2004/03/25 11:03:19]

Volvo - V70 5cyl Turbo -

Perfect Power Wiring Diagram

ECU make: Vehicle make: VolvoModel: V70 5cyl Turbo

Year:

Comments: RPM readings double

ECU Location: Behind right hand headlight.

Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 10Teeth per turn(incl miss) 60Teeth per firing 12Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:886 Ref:Volvo371.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo371.htm [2004/03/25 11:03:22]

Volvo - 850 2.0 Turbo (B5204T/T2/T3/B5234T) - 1993-97

Perfect Power Wiring Diagram

ECU make: Bosch Motronic 4.3/4.4 Vehicle make: VolvoModel: 850 2.0 Turbo (B5204T/T2/T3/B5234T)

Year: 1993-97

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 60Teeth per firing 30Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:887 Ref:Volvo372.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo372.htm [2004/03/25 11:03:24]

Volvo - 850 2.3 Turbo (B5204T/T2/T3/B5234T) - 1993-97

Perfect Power Wiring Diagram

ECU make: Bosch Motronic 4.3/4.4 Vehicle make: VolvoModel: 850 2.3 Turbo (B5204T/T2/T3/B5234T)

Year: 1993-97

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 60Teeth per firing 30Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:888 Ref:Volvo373.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo373.htm [2004/03/25 11:03:26]

Volvo - 850 2.3 R/T-5R (B5234T4/T5) - 1994-97

Perfect Power Wiring Diagram

ECU make: Bosch Motronic 4.3/4.4 Vehicle make: VolvoModel: 850 2.3 R/T-5R (B5234T4/T5)

Year: 1994-97

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 60Teeth per firing 30Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:889 Ref:Volvo374.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo374.htm [2004/03/25 11:03:27]

Volvo - 850 2.0i 10V (B5202S) - 1995-97

Perfect Power Wiring Diagram

ECU make: Bendix Fenix 5.2 Vehicle make: VolvoModel: 850 2.0i 10V (B5202S)

Year: 1995-97

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 60Teeth per firing 30Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:890 Ref:Volvo379.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo379.htm [2004/03/25 11:03:29]

Volvo - 850 2.5/Turbo (B5254S/T) - 1996-97

Perfect Power Wiring Diagram

ECU make: Bosch Motronic 4.3/4.4 Vehicle make: VolvoModel: 850 2.5/Turbo (B5254S/T)

Year: 1996-97

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 60Teeth per firing 30Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:891 Ref:Volvo375.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo375.htm [2004/03/25 11:03:31]

Volvo - S/V/C70 2.0 Turbo (B5204T/T2/T3) - 1997-99

Perfect Power Wiring Diagram

ECU make: Bosch Motronic 4.3/4.4 Vehicle make: VolvoModel: S/V/C70 2.0 Turbo (B5204T/T2/T3)

Year: 1997-99

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 60Teeth per firing 30Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:892 Ref:Volvo376.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo376.htm [2004/03/25 11:03:33]

Volvo - S/V/C70 2.3/Turbo (B5234T/T3/T4/T6/T7/FS) - 1997-01

Perfect Power Wiring Diagram

ECU make: Bosch Motronic 4.3/4.4 Vehicle make: VolvoModel: S/V/C70 2.3/Turbo (B5234T/T3/T4/T6/T7/FS)

Year: 1997-01

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 60Teeth per firing 30Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:893 Ref:Volvo377.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo377.htm [2004/03/25 11:03:34]

Volvo - S/V/C70 2.5 20V/Turbo (B5254S/T) - 1997-00

Perfect Power Wiring Diagram

ECU make: Bosch Motronic 4.3/4.4 Vehicle make: VolvoModel: S/V/C70 2.5 20V/Turbo (B5254S/T)

Year: 1997-00

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 60Teeth per firing 30Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:894 Ref:Volvo378.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo378.htm [2004/03/25 11:03:36]

Volvo - 850 2.5i 20V (B5254FS) - 1991-97

Perfect Power Wiring Diagram

ECU make: Bosch LH 3.2 Jetronic Vehicle make: VolvoModel: 850 2.5i 20V (B5254FS)

Year: 1991-97

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 2Teeth per firing 1Modes 10System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:884 Ref:Volvo834.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo834.htm [2004/03/25 11:03:39]

Volvo - 850 2.0i 20V (B5204FS) - 1991-97

Perfect Power Wiring Diagram

ECU make: Bosch LH 3.2 Jetronic Vehicle make: VolvoModel: 850 2.0i 20V (B5204FS)

Year: 1991-97

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 2Teeth per firing 1Modes 10System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:885 Ref:Volvo833.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo833.htm [2004/03/25 11:03:41]

Volvo - 850 2.5i 10V - 1993-97

Perfect Power Wiring Diagram

ECU make: Bendix Fenix 5.2 Vehicle make: VolvoModel: 850 2.5i 10V

Year: 1993-97

Comments: RPM readings double

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 10Teeth per turn(incl miss) 60Teeth per firing 12Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:879 Ref:Volvo380.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo380.htm [2004/03/25 11:03:43]

Volvo - S/V70 2.0i 10V - 1997-99

Perfect Power Wiring Diagram

ECU make: Bendix Fenix 5.2 Vehicle make: VolvoModel: S/V70 2.0i 10V

Year: 1997-99

Comments: RPM readings double

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 10Teeth per turn(incl miss) 60Teeth per firing 12Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:880 Ref:Volvo381.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo381.htm [2004/03/25 11:03:44]

Volvo - S/V70 2.5i 10V (B5252S) - 1997-99

Perfect Power Wiring Diagram

ECU make: Bendix Fenix 5.2 Vehicle make: VolvoModel: S/V70 2.5i 10V (B5252S)

Year: 1997-99

Comments: RPM readings double

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 10Teeth per turn(incl miss) 60Teeth per firing 12Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:881 Ref:Volvo382.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo382.htm [2004/03/25 11:03:46]

Volvo - 960 2.5i 24V (B6254F) - 1996-97

Perfect Power Wiring Diagram

ECU make: Bosch Motronic 4.4 Vehicle make: VolvoModel: 960 2.5i 24V (B6254F)

Year: 1996-97

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 6Teeth per turn(incl miss) 60Teeth per firing 20Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:882 Ref:Volvo383.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo383.htm [2004/03/25 11:03:48]

Volvo - 960 3.0i 24V (B6304F) - 1996-97

Perfect Power Wiring Diagram

ECU make: Bosch Motronic 4.4 Vehicle make: VolvoModel: 960 3.0i 24V (B6304F)

Year: 1996-97

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 6Teeth per turn(incl miss) 60Teeth per firing 20Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:883 Ref:Volvo384.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo384.htm [2004/03/25 11:03:50]

Volvo - B230FT - 1989

Perfect Power Wiring Diagram

ECU make: LH-Jetronic 2.2 Vehicle make: VolvoModel: B230FT

Year: 1989

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 2Teeth per firing 1Modes 10System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:867 Ref:Volvo847.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo847.htm [2004/03/25 11:03:53]

Volvo - 850 2.4L - 1995

Perfect Power Wiring Diagram

ECU make: Vehicle make: VolvoModel: 850 2.4L

Year: 1995

Comments: Not sure of the MAS signal, could also be A8 or A12

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 2Teeth per firing 1Modes 10System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:868 Ref:Volvo876.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo876.htm [2004/03/25 11:03:55]

Volvo - 740/760 2.3i Turbo (B230FT) - 1990-91

Perfect Power Wiring Diagram

ECU make: Bosch LH 2.2 Jetronic Vehicle make: VolvoModel: 740/760 2.3i Turbo (B230FT)

Year: 1990-91

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 2Teeth per firing 1Modes 10System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:869 Ref:Volvo748.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo748.htm [2004/03/25 11:03:57]

Volvo - 760 2.8i (B280E/F) - 1986-91

Perfect Power Wiring Diagram

ECU make: Bosch LH 2.2 Jetronic Vehicle make: VolvoModel: 760 2.8i (B280E/F)

Year: 1986-91

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 2Teeth per firing 1Modes 10System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:870 Ref:Volvo749.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo749.htm [2004/03/25 11:03:59]

Volvo - 240 2.3i (B230FD) - 1993-94

Perfect Power Wiring Diagram

ECU make: Bosch LH 2.4 Jetronic Vehicle make: VolvoModel: 240 2.3i (B230FD)

Year: 1993-94

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 2Teeth per firing 1Modes 10System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:871 Ref:Volvo741.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo741.htm [2004/03/25 11:04:00]

Volvo - 740 2.0i/2.3i 16V (B200F/B234F) - 1990-91

Perfect Power Wiring Diagram

ECU make: Bosch LH 2.4 Jetronic Vehicle make: VolvoModel: 740 2.0i/2.3i 16V (B200F/B234F)

Year: 1990-91

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 2Teeth per firing 1Modes 10System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:872 Ref:Volvo742.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo742.htm [2004/03/25 11:04:02]

Volvo - 940 2.0i/Turbo (B200F/T) - 1991-95

Perfect Power Wiring Diagram

ECU make: Bosch LH 2.4 Jetronic Vehicle make: VolvoModel: 940 2.0i/Turbo (B200F/T)

Year: 1991-95

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 2Teeth per firing 1Modes 10System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:873 Ref:Volvo743.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo743.htm [2004/03/25 11:04:04]

Volvo - 940 2.3i/16V/Turbo (B230FB/B234F/B230FK) - 1990-95

Perfect Power Wiring Diagram

ECU make: Bosch LH 2.4 Jetronic Vehicle make: VolvoModel: 940 2.3i/16V/Turbo (B230FB/B234F/B230FK)

Year: 1990-95

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 2Teeth per firing 1Modes 10System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:874 Ref:Volvo744.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo744.htm [2004/03/25 11:04:06]

Volvo - 940/960 Turbo 2.3i (B230FT) - 1990-98

Perfect Power Wiring Diagram

ECU make: Bosch LH 2.4 Jetronic Vehicle make: VolvoModel: 940/960 Turbo 2.3i (B230FT)

Year: 1990-98

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 2Teeth per firing 1Modes 10System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:875 Ref:Volvo745.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo745.htm [2004/03/25 11:04:07]

Volvo - 240 2.3i (B230F0) - 1984-90

Perfect Power Wiring Diagram

ECU make: Bosch LH 2.2 Jetronic Vehicle make: VolvoModel: 240 2.3i (B230F0)

Year: 1984-90

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 2Teeth per firing 1Modes 10System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:876 Ref:Volvo746.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo746.htm [2004/03/25 11:04:09]

Volvo - 440/460/480 1.7i Turbo (B18FT(M)) - 1988-96

Perfect Power Wiring Diagram

ECU make: Bosch LH2.2 Jetronic Vehicle make: VolvoModel: 440/460/480 1.7i Turbo (B18FT(M))

Year: 1988-96

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 4Teeth per turn(incl miss) 2Teeth per firing 1Modes 10System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:877 Ref:Volvo747.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo747.htm [2004/03/25 11:04:11]

Volvo - S/V90 3.0i 24V (B6304F/S1/S2) - 1997-98

Perfect Power Wiring Diagram

ECU make: Bosch Motronic 4.4 Vehicle make: VolvoModel: S/V90 3.0i 24V (B6304F/S1/S2)

Year: 1997-98

Comments:

ECU Location: Click here to return to Volvo Menu.

ECU Pin Out

Wiring Diagram Global SettingsCylinders 6Teeth per turn(incl miss) 60Teeth per firing 20Modes 1System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF Click here for an explanation on how to use the global settings.

Copyright Digital Technology Date:24 Mar 2004 Page:878 Ref:Volvo385.pdf

The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.

file://///JEDI/Company%20Folders/Automotive_(PP)/WirDV2/WD_OutPut/Volvo385.htm [2004/03/25 11:04:13]