ALL NEW OOP 2014

November 2014

All New OOP 2014

# All New OOP Tutorial 2014 # 1

Contents INTRODUCTION .................................................................................................................................................... 2

DATABASE .............................................................................................................................................................. 3

1.1. Create File ............................................................................................................................................. 3

APPLICATION ........................................................................................................................................................ 5

2.1. Create File ............................................................................................................................................. 5

2.2. Connection Class ................................................................................................................................ 7

2.3. Module ................................................................................................................................................... 8

2.4. Entity ...................................................................................................................................................... 9

2.5. Control ................................................................................................................................................ 11

2.6. Boundary ........................................................................................................................................... 14

REPORTING ......................................................................................................................................................... 25

3.1. .rpt File ............................................................................................................................................... 25

3.2. Reporting Form ............................................................................................................................... 26

DEPLOYMENT .................................................................................................................................................... 30

4.1. File System on Target Machine ................................................................................................... 30

4.2. Deployment ....................................................................................................................................... 32


INTRODUCTION

This article is dedicated to everyone who wants to know more about programming,

especially to Microsoft Visual Studio in the next generation (VB.Net) and Ms. Access database. in

this tutorial writter wouldn’t explain any detail about it. This tutorial only tell about basic

programming.

As OOP (Object Oriented Programming) is now such a general programming technique

in dekstop programming, so we will use this technique to complete this article. Then make sure

your self before continuing and finish this tutorial.

Another note is, do not continue to the next step with skip a step before. Means you have

to finish this tutorial step by step. If you have any trouble just tell us. At the end of this article

you will see how to contact us. We will using Visual Basic.Net 2008 and Ms. Access 2007.

Best Regards,

Bambang Wiratmojo


DATABASE

1.1. Create File

Before we talking too much about creating such as an application sure

we need to create the storage or we used to call as database. In this tutorial we

gonna use microsoft access 2007 database. For first step we just need to know

about stand alone database is ok, then next step we will talking about sharing

database.

Open your microsoft access 2007 database in your pc.

Create file and named as PERSON_DB.

Create a table inside this database and named as PERSON_TABLE.

In Design View create some fields as below :

Field Name Data Type Field Size PersonId Text 3 FirstName Text 35 LastName Text 35

Close your created database then open again using open exclusive.


Give this database a password using open exclusive access database

See at Database Tool Tab Encrypt with password

Set database password as “123”

Then save this database at debug file folder in VB project, it wouldn’t be

guaranteed by me that the application data running well if you dont put

in here, trust me.


APPLICATION

2.1. Create File As we have told at introduction we gonna use Visual Basic.Net 2008, so

please make sure that you have instaled your own VB2008 correctly, because in

this article we wouldn’t tell you how to install it.

Open your own Visual Studio, create a new project named as “ALL NEW

OOP”

Create a system folders (BOUNDARY, CONTROL, ENTITY, MODUL) to

classified as below picture. Using right click at Project Name (ALL NEW

OOP)


Then the folders should be as below picture

Create Deployment Project, using menu File Add New Project.

Named as “DEPLOY APP” as above picture

Right click at DEPLOY APP Prerequisites

At Choose which prerequisites to install, check .NET Framework 2.0

(x86), Windows Installer 3.1, .NET Framework 3.0 (x86), .NET

Framework 3.5, Crystal Report Basic for Visual Studio 2008 (x86, x64),

Visual Studio Tools for the Office system 3.0 Runtime

At Specify the install location fore prerequisites, select Download

prerequisites from the same location as my application

Save you setting for the prerequisites to OK.

Still at DEPLOY APP, but move to the properties

o Author : your name

o Manufacturer : your company name

o ManufacturerURL : your company URL

o Product Name : ALL NEW OOP TUTORIAL 2014

o Support Phone : your phone number

o Support URL : your email address

o Title : DEPLOY APP


2.2. Connection Class

Right click at project file at solution explorer (ALL NEW OOP) Add

Class (1st picture) then named as DB_Connection (2nd picture)

View code the created then write below source code

Imports System.Data.OleDb Public Class DB_Connection 'Access Database 2007 Public DB_CONNECTION As New OleDbConnection("Provider=Microsoft.ACE.OLEDB.12.0;" _ & "Data Source=PERSON_DB.accdb;" _ & "Jet OLEDB:Database Password=123;") Public Function OPENCONNECTION() As OleDbConnection DB_CONNECTION.Open() Return DB_CONNECTION End Function Public Function CLOSECONNECTION() As OleDbConnection DB_CONNECTION.Close() Return DB_CONNECTION End Function End Class


2.3. Module

Move to Solution Explorer, right click at MODUL folder Add Module

(1st picture), then named as VARIABELNYA (2nd picture)


Imports System.Data.OleDb Module VARIABELNYA

#Region "DEKLARASI" Public CMD As New OleDbCommand Public DTA As New OleDbDataAdapter Public DTR As OleDbDataReader Public DTS As New DataSet Public DTT As New DataTable #End Region #Region "NAMES" Public MePERSON_ENT As New PERSON_Entity Public MePERSON_CON As New PERSON_Control #End Region End Module


2.4. Entity

Move to Solution Explorer, right click at ENTITY folder Add Class,

named as PERSON_Entity

View code the created then write below source code Public Class PERSON_Entity #Region "DECLARATION" Private _PersonId As String Private _FirstName As String Private _LastName As String #End Region


#Region "PROPERTY" Public Overridable Sub DATA_PERSON(ByVal PersonId As String, _ ByVal FirstName As String, _ ByVal LastName As String) _PersonId = PersonId _FirstName = FirstName _LastName = LastName End Sub Public Property PersonId() As String Get Return _PersonId End Get Set(ByVal value As String) _PersonId = value End Set End Property Public Property FirstName() As String Get Return _FirstName End Get Set(ByVal value As String) _FirstName = value End Set End Property Public Property LastName() As String Get Return _LastName End Get Set(ByVal value As String) _LastName = value End Set End Property #End Region End Class


2.5. Control

Move to Solution Explorer, right click at CONTROL folder Add Class,

named as PERSON_Control


Imports System.Data.OleDb Public Class PERSON_Control Dim MeCONNECTION As New DB_Connection #Region "ACTION" Public Function SAVE_DATA(ByVal _PERSON As PERSON_Entity) As OleDbCommand MeCONNECTION.CLOSECONNECTION() CMD = New OleDbCommand("Insert Into PERSON_TABLE Values (PersonId, FirstName, LastName)", MeCONNECTION.OPENCONNECTION) CMD.CommandType = CommandType.Text Dim _PersonId As New OleDbParameter("@PersonId", OleDbType.Char, 3) _PersonId.Value = _PERSON.PersonId Dim _FirstName As New OleDbParameter("@FirstName", OleDbType.Char, 35) _FirstName.Value = _PERSON.FirstName Dim _LastName As New OleDbParameter("@LastName", OleDbType.Char, 35) _LastName.Value = _PERSON.LastName With CMD.Parameters .Add(_PersonId) .Add(_FirstName) .Add(_LastName) End With CMD.ExecuteNonQuery() CMD = New OleDbCommand("", MeCONNECTION.CLOSECONNECTION) Return CMD


End Function Public Function EDIT_DATA(ByVal _PERSON As PERSON_Entity) As OleDbCommand MeCONNECTION.CLOSECONNECTION() CMD = New OleDbCommand("Update PERSON_TABLE Set FirstName=@FirstName, LastName=@LastName " & _ "Where PersonId=@PersonId", MeCONNECTION.OPENCONNECTION) CMD.CommandType = CommandType.Text Dim _PersonId As New OleDbParameter("@PersonId", OleDbType.Char, 3) _PersonId.Value = _PERSON.PersonId Dim _FirstName As New OleDbParameter("@FirstName", OleDbType.Char, 35) _FirstName.Value = _PERSON.FirstName Dim _LastName As New OleDbParameter("@LastName", OleDbType.Char, 35) _LastName.Value = _PERSON.LastName With CMD.Parameters .Add(_FirstName) .Add(_LastName) .Add(_PersonId) End With CMD.ExecuteNonQuery() CMD = New OleDbCommand("", MeCONNECTION.CLOSECONNECTION) Return CMD End Function Public Function DELETE_DATA(ByVal _PERSON As PERSON_Entity) As OleDbCommand MeCONNECTION.CLOSECONNECTION() CMD = New OleDbCommand("Delete From PERSON_TABLE Where PersonId=@PersonId", MeCONNECTION.OPENCONNECTION) CMD.CommandType = CommandType.Text Dim _PersonId As New OleDbParameter("@PersonId", OleDbType.Char, 3) _PersonId.Value = _PERSON.PersonId With CMD.Parameters .Add(_PersonId) End With CMD.ExecuteNonQuery() CMD = New OleDbCommand("", MeCONNECTION.CLOSECONNECTION) Return CMD End Function #End Region


#Region "QUERY" Public Overridable Function AUTO_ID() As String MeCONNECTION.CLOSECONNECTION() DTT = New DataTable DTA = New OleDbDataAdapter("SELECT TOP 1 * FROM PERSON_TABLE ORDER BY PersonId DESC", MeCONNECTION.OPENCONNECTION) DTA.Fill(DTT) If DTT.Rows.Count = 0 Then Return "001" Else PLUS = Mid(DTT.Rows(0).Item("PersonId"), 3) If PLUS = 999 Then MsgBox("BARIS DATA MELAMPAUI BATAS SISTEM" & vbCrLf & _ "SILAHKAN KONTAK PENGEMBANG SISTEM ANDA", MsgBoxStyle.Critical) Return Nothing Else PLUS = PLUS + 1 Return PLUS.ToString.PadLeft(3, "0") End If End If End Function Public Function ISI_GRID() As DataView Try MeCONNECTION.CLOSECONNECTION() DTA = New OleDbDataAdapter("SELECT * FROM PERSON_TABLE ORDER BY PersonId ASC", MeCONNECTION.OPENCONNECTION) Try DTS = New DataSet DTS.Tables("PERSON_TABLE").Clear() Catch ex As Exception End Try DTA.Fill(DTS, "PERSON_TABLE") Dim GRID As New DataView(DTS.Tables("PERSON_TABLE")) Return GRID Catch ex As Exception Throw New Exception(ex.Message) End Try End Function Public Function CARI_DATA(ByVal CmbCARI As String, ByVal TxtCARI As String) As String Try Dim CARI As String MeCONNECTION.CLOSECONNECTION() CARI = "SELECT * FROM PERSON_TABLE WHERE " & CmbCARI & " LIKE '%" & TxtCARI & "%'" DTA = New OleDbDataAdapter(CARI, MeCONNECTION.OPENCONNECTION) Try DTS.Tables("PERSON_TABLE").Clear()


Catch ex As Exception End Try DTA.Fill(DTS, "PERSON_TABLE") Dim GRID As New DataView(DTS.Tables("PERSON_TABLE")) Return CARI Catch ex As Exception Throw New Exception(ex.Message) End Try End Function #End Region End Class

2.6. Boundary

Move to Solution Explorer, add more folder inside BOUNDARY folder,

Add FORM and REPORT, then at REPORT folder add child folder RFORM

and RPT as below picture

Right click at FORM folder Add Windows Form, named as

MAINFORM and set this as MDI Form application true.


Design the MAINFORM as below

Detail :

o Splitter (as separation between menu button and display form)

o Button (PERSON (BtnPERSON), REPORTING(BtnREPORT))

o Lable (OOP TUTORIAL, 2013)


Public Class MAINFORM Private Sub BtnPERSON_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnPERSON.Click Dim Frm As New PERSON_LIST With Frm .MdiParent = Me .WindowState = FormWindowState.Maximized .Show() End With End Sub Private Sub BtnREPORT_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnREPORT.Click Dim Frm As New FPRINT With Frm .MdiParent = Me .WindowState = FormWindowState.Maximized .Show() End With End Sub End Class


Right click at FORM folder Add Windows Form, named as

PERSON_LIST

Design the PERSON_LIST as below

Detail :

o Datagridview (DgvPERSON)

o Button (&NEW ENTRY (BtnNEWENTRY), &CLOSE (BtnCLOSE),

&FIND (BtnFIND))

o Textbox (KEYWORD (TxtFIND))

o ComboBox (SELECT(CmbFIND))

o Lable (PERSON, SELECT, KEYWORD)

o Datagridview setting, deselect all item


o Click Edit Columns

o Click Add Name=DgvBtnEDIT,

Type=DataGridViewButtonColumn, Header Text = EDIT

o Double click, DefaultCellStyle

o NullValue=EDIT

o Click Add Name=DgvBtnDELETE,

Type=DataGridViewButtonColumn, Header Text = DELETE

o Double click, DefaultCellStyle

o NullValue=DELETE

o Click Add Name=ID, Type=DataGridViewTextboxColumn,

o Header Text = ID

o Name = PersonId

o DataPropertyName = PersonId

o Click Add Name=FirstName,

Type=DataGridViewTextboxColumn,

o Header Text = FIRST NAME

o Name = FirstName

o DataPropertyName = FirstName

o Click Add Name=LastName,

Type=DataGridViewTextboxColumn,

o Header Text = LAST NAME

o Name = LastName

o DataPropertyName = LastName


View code the created then write below source code Public Class PERSON_LIST #Region "EVENT" Private Sub PERSON_LIST_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Activated Try DgvPERSON.DataSource = MePERSON_CON.ISI_GRID Call CAPITAL() Call FORMAT() Catch ex As Exception MsgBox(ex.Message) End Try End Sub Private Sub CmbFIND_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CmbFIND.SelectedIndexChanged TxtFIND.Text = "" TxtFIND.Focus() DgvPERSON.DataSource = MePERSON_CON.ISI_GRID End Sub Private Sub BtnFIND_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnFIND.Click MePERSON_CON.CARI_DATA(CmbFIND.SelectedValue, TxtFIND.Text) End Sub Private Sub TxtFIND_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles TxtFIND.KeyPress If e.KeyChar = Chr(13) Then BtnFIND.Focus() End If End Sub Private Sub BtnCLOSE_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnCLOSE.Click Me.Close() End Sub Private Sub BtnNEWENTRY_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnNEWENTRY.Click Dim Frm As New PERSON With Frm .MdiParent = MAINFORM .WindowState = FormWindowState.Maximized .Show() End With End Sub Private Sub DgvPERSON_CellContentClick(ByVal sender As System.Object, ByVal e As


System.Windows.Forms.DataGridViewCellEventArgs) Handles DgvPERSON.CellContentClick Dim Frm As New PERSON(INFO_DATA()) Select Case e.ColumnIndex Case 0 DgvBtnEDIT.Text = "EDIT" With Frm .MdiParent = MAINFORM .WindowState = FormWindowState.Maximized .BtnSAVE.Text = "&EDIT" .BtnCLOSE.Text = "&CANCEL" .Show() End With Case 1 DgvBtnDELETE.Text = "DELETE" With Frm .MdiParent = MAINFORM .WindowState = FormWindowState.Maximized .BtnSAVE.Text = "&DELETE" .BtnCLOSE.Text = "&CANCEL" .Show() End With End Select End Sub Private Function INFO_DATA() As PERSON_Entity With MePERSON_ENT .PersonId = DgvPERSON.Item(2, DgvPERSON.CurrentRow.Index).Value .FirstName = DgvPERSON.Item(3, DgvPERSON.CurrentRow.Index).Value .LastName = DgvPERSON.Item(4, DgvPERSON.CurrentRow.Index).Value End With Return MePERSON_ENT End Function #End Region #Region "OTOMATICALY" Private Sub FORMAT() With DgvPERSON .Columns(2).Width = 60 .Columns(3).Width = 200 .Columns(4).Width = 200 End With With CmbFIND DTT = New DataTable DTT.Columns.Add("Id") DTT.Columns.Add("Name") DTT.Rows.Add("PERSON_TABLE.PersonId", "ID") DTT.Rows.Add("PERSON_TABLE.FirstName", "FIRST NAME")


DTT.Rows.Add("PERSON_TABLE.LastName", "LAST NAME") .DataSource = DTT .DisplayMember = "Name" .ValueMember = "Id" End With End Sub Private Sub CAPITAL() TxtFIND.CharacterCasing = CharacterCasing.Upper End Sub #End Region End Class

Right click at FORM folder Add Windows Form, named as PERSON

Design the PERSON as below

Detail :

o Lable (PERSON, FIRST NAME, LAST NAME, ID(LblPERSONID))

o Button (&INPUT (BtnSAVE), &CLOSE (BtnCLOSE))

o Textbox (FIRST NAME (TxtFIRSTNAME), LAST

NAME(TxtLASTNAME))

View code the created then write below source code Public Class PERSON #Region "TEXT" Private Sub TEXTDEACTIVE() TxtFIRSTNAME.Enabled = False TxtLASTNAME.Enabled = False End Sub Private Sub TEXTACTIVE() TxtFIRSTNAME.Enabled = True TxtLASTNAME.Enabled = True End Sub


Private Sub TEXTEMPTY() LblPERSONID.Text = "" TxtFIRSTNAME.Text = "" TxtLASTNAME.Text = "" End Sub Private Sub CAPITAL() TxtFIRSTNAME.CharacterCasing = CharacterCasing.Upper TxtLASTNAME.CharacterCasing = CharacterCasing.Upper End Sub Private Sub TEXTLIMIT() TxtFIRSTNAME.MaxLength = 35 TxtLASTNAME.MaxLength = 35 End Sub #End Region #Region "BUTTON" Private Sub BUTTONREADY() Call TEXTACTIVE() TxtFIRSTNAME.Focus() BtnSAVE.Text = "&SAVE" BtnCLOSE.Text = "&CANCEL" End Sub Private Sub BUTTONBEGIN() BtnSAVE.Text = "&INPUT" BtnCLOSE.Text = "&CLOSE" End Sub Private Sub BUTTONEDIT() Call TEXTACTIVE() TxtFIRSTNAME.Focus() BtnSAVE.Text = "&OK" BtnCLOSE.Text = "&CANCEL" End Sub Private Sub BUTTONDELETE() TxtFIRSTNAME.Focus() BtnCLOSE.Text = "&CANCEL" End Sub #End Region #Region "ACTION" Private Sub SAVE_DATA() If TxtFIRSTNAME.Text = "" Or TxtLASTNAME.Text = "" Then MsgBox("THERE ARE NO DATA TO BE SAVED !!!", MsgBoxStyle.Critical, Me.Text) Call TEXTDEACTIVE() Call TEXTEMPTY() Call BUTTONBEGIN()


Else MePERSON_ENT.PersonId = LblPERSONID.Text MePERSON_ENT.FirstName = TxtFIRSTNAME.Text MePERSON_ENT.LastName = TxtLASTNAME.Text MePERSON_CON.SAVE_DATA(MePERSON_ENT) MsgBox("DATA HAS BEEN SAVED!!!", MsgBoxStyle.Information, Me.Text) Call TEXTDEACTIVE() Call TEXTEMPTY() Call BUTTONBEGIN() End If End Sub Private Sub EDIT_DATA() If TxtFIRSTNAME.Text = "" Or TxtLASTNAME.Text = "" Then MsgBox("THERE ARE NO DATA TO BE EDITED !!!", MsgBoxStyle.Critical, Me.Text) Call TEXTDEACTIVE() Call TEXTEMPTY() Call BUTTONBEGIN() Else MePERSON_ENT.PersonId = LblPERSONID.Text MePERSON_ENT.FirstName = TxtFIRSTNAME.Text MePERSON_ENT.LastName = TxtLASTNAME.Text MePERSON_CON.EDIT_DATA(MePERSON_ENT) MsgBox("DATA HAS BEEN EDITED!!!", MsgBoxStyle.Information, Me.Text) Call TEXTDEACTIVE() Call TEXTEMPTY() Call BUTTONBEGIN() End If End Sub Private Sub DELETE_DATA() If TxtFIRSTNAME.Text = "" Or TxtLASTNAME.Text = "" Then MsgBox("THERE ARE NO DATA TO BE DELETED !!!", MsgBoxStyle.Critical, Me.Text) Call TEXTDEACTIVE() Call TEXTEMPTY() Call BUTTONBEGIN() Else MePERSON_ENT.PersonId = LblPERSONID.Text MePERSON_CON.DELETE_DATA(MePERSON_ENT) MsgBox("DATA HAS BEEN DELETED!!!", MsgBoxStyle.Information, Me.Text) Call TEXTDEACTIVE() Call TEXTEMPTY() Call BUTTONBEGIN() End If End Sub #End Region


#Region "EVENT" Private Sub CHOOSEACTION() Select Case BtnSAVE.Text Case "&INPUT" TEXTDEACTIVE() TEXTEMPTY() Case "&EDIT" TEXTDEACTIVE() Case "&DELETE" TEXTDEACTIVE() End Select End Sub Public Sub New() InitializeComponent() End Sub Public Sub New(ByVal MeOBJECT As PERSON_Entity) InitializeComponent() LblPERSONID.Text = MeOBJECT.PersonId TxtFIRSTNAME.Text = MeOBJECT.FirstName TxtLASTNAME.Text = MeOBJECT.LastName End Sub Private Sub BtnSAVE_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnSAVE.Click Select Case BtnSAVE.Text Case "&INPUT" BUTTONREADY() LblPERSONID.Text = MePERSON_CON.AUTO_ID Case "&SAVE" SAVE_DATA() Case "&DELETE" DELETE_DATA() Case "&EDIT" BUTTONEDIT() Case "&OK" EDIT_DATA() End Select End Sub Private Sub PERSON_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Call CHOOSEACTION() Call CAPITAL() Call TEXTLIMIT() End Sub


Private Sub BtnCLOSE_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnCLOSE.Click Select Case BtnCLOSE.Text Case "&CANCEL" Call BUTTONBEGIN() Call TEXTDEACTIVE() Call TEXTEMPTY() Case "&CLOSE" Me.Close() End Select End Sub Private Sub TxtFIRSTNAME_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles TxtFIRSTNAME.KeyPress If e.KeyChar = Chr(13) Then TxtLASTNAME.Focus() End If End Sub Private Sub TxtLASTNAME_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles TxtLASTNAME.KeyPress If e.KeyChar = Chr(13) Then BtnSAVE.Focus() End If End Sub #End Region End Class


REPORTING

3.1. .rpt File

Right click at RPT folder Add New Item Reporting Crystal

Report, named as RPT_PERSON

Set Database Fields, Report Design as below picture

View Preview Data should be as follow, offcourse after inputed data


3.2. Reporting Form

Right click at RFORM folder Add Windows Form, named as

FPERSON

Drag CrystalReportViewer into the form, names as CrysPERSON

View code the created then write below source code Imports CrystalDecisions.Shared Imports CrystalDecisions.CrystalReports.Engine Public Class FPERSON Dim strSELECT As String Dim MeCONNECTION As New DB_Connection Dim CrRpt As New ReportDocument Public Sub New(ByVal _strSELECT As String) InitializeComponent() strSELECT = _strSELECT End Sub Private Sub PRINT() Try CrRpt = New ALL_NEW_OOP.RPT_PERSON CrRpt.PrintOptions.PaperSource = PaperSource.Manual CrRpt.DataDefinition.RecordSelectionFormula = strSELECT Dim DTA As New OleDb.OleDbDataAdapter Dim DTS As New DataSet DTA = New OleDb.OleDbDataAdapter(strSELECT, MeCONNECTION.CLOSECONNECTION) DTA.Fill(DTS, "PERSON_TABLE") CrRpt.Load(Application.StartupPath & "/RPT_PERSON.rpt") CrRpt.SetDataSource(DTS) CrysPERSON.DisplayGroupTree = False CrysPERSON.ShowGroupTreeButton = False CrysPERSON.ShowExportButton = True CrysPERSON.ReportSource = CrRpt CrysPERSON.Refresh() CrysPERSON.RefreshReport() DTS.Clear() Catch ex As Exception MsgBox(ex.Message.ToString, MsgBoxStyle.OkOnly, "ERROR") End Try End Sub


Private Sub FPERSON_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Call PRINT() CrysPERSON.Zoom(85) End Sub End Class

Right click at RFORM folder Add Windows Form, named as FPRINT

Design the FPRINT as below

Detail :

o Lable (PREVIEW DATA, SELECT REPORT, SELECT QUERY,

KEYWORD)

o Button (&PRINT (BtnPRINTALLDATA), &PRINT (BtnQUERY))

o Combobox (SELECT REPORT (CmbALLDATA,

CmbSELECTREPORT), SELECT QUERY (CmbQUERY))

o Textbox (KEYWORD (TxtKEYWORD))


View code the created then write below source code Public Class FPRINT #Region "EVENT" Private Sub FPRINT_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Call COMBO_PRINT() TxtKEYWORD.CharacterCasing = CharacterCasing.Upper End Sub Private Sub BtnPRINTALLDATA_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnPRINTALLDATA.Click Dim RptQuery As String = "SELECT * FROM PERSON_TABLE ORDER BY PersonId ASC" Select Case CmbALLDATA.Text Case "PERSON REPORT" Dim Frm As New FPERSON(RptQuery) With Frm .MdiParent = MAINFORM .WindowState = FormWindowState.Maximized .Show() End With End Select End Sub Private Sub BtnQUERY_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnQUERY.Click Dim RptQuery As String = "Select * From PERSON_TABLE Where " & CmbQUERY.SelectedValue & " Like '%" & TxtKEYWORD.Text & "%'" Select Case CmbSELECTREPORT.Text Case "PERSON REPORT" Dim Frm As New FPERSON(RptQuery) With Frm .MdiParent = MAINFORM .WindowState = FormWindowState.Maximized .Show() End With End Select End Sub Private Sub CmbQUERY_SelectedValueChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles CmbQUERY.SelectedValueChanged TxtKEYWORD.Text = "" TxtKEYWORD.Focus() End Sub Private Sub CmbSELECTREPORT_SelectedValueChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles CmbSELECTREPORT.SelectedValueChanged DTT = New DataTable


DTT.Columns.Add("ID") DTT.Columns.Add("Name") DTT.Rows.Add("PersonId", "ID NUM") DTT.Rows.Add("FirstName", "FIRST NAME") DTT.Rows.Add("LastName", "LAST NAME") CmbQUERY.DataSource = DTT CmbQUERY.DisplayMember = "Name" CmbQUERY.ValueMember = "ID" End Sub Private Sub TxtKEYWORD_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles TxtKEYWORD.KeyPress If e.KeyChar = Chr(13) Then BtnQUERY.Focus() End If End Sub #End Region #Region "OTOMATICALY" Private Sub COMBO_PRINT() Dim A As String = "PERSON REPORT" With CmbALLDATA .Items.Clear() .Items.Add(A) End With With CmbSELECTREPORT .Items.Clear() .Items.Add(A) End With With CmbQUERY .Items.Clear() .Items.Add("ID NUM") .Items.Add("FIRST NAME") .Items.Add("LAST NAME") End With End Sub #End Region

End Class


DEPLOYMENT

4.1. File System on Target Machine

Right click at DEPLOY APP project View File System

Select Application Folder as below picture.

At the right column, right click Add Assembly


Pointing to Tab Browse Select ALL NEW OOP .exe

At the right column, right click Add File

Pointing to Tab Browse Select PERSON_DB

At the right column, right click Add File

Pointing to Tab Browse Select Minimize_Box_Blue # this is such as an

additional file (shortcut), so may able to add this things or not this step is

up to you...

At the right column, right click at ALL NEW OOP.exe Create Shortcut

to ALL NEW OOP.exe

Set the Shortcut properties as

o Name : ALL NEW OOP

o Icon : select our added icon before


o Cut this shortcut, then paste in User’s Dekstop in left column

under File System on Target Machine

Creata a new folder in User’s Programs Menu at left column under File

System on Target Machine, and named as ALL NEW OOP

At the right column, right click at ALL NEW OOP.exe Create Shortcut

to ALL NEW OOP.exe

Set the Shortcut properties as

o Name : ALL NEW OOP

o Icon : select our added icon before

Cut this shortcut, then paste in User’s Programs Menu in left column

under File System on Target Machine

4.2. Deployment

Right click at DEPLOY APP Build

Wait for a second while until finish visual studio is Building our

application become a setup application. Message information when

building application is at below left side of visual studio. Wait until you

can read at that place the word “Succeeded”


ALL NEW OOP TUTORIAL 2014 SUPPORTED BY CLAYMORECODE 2014

Polymorphic372

Is a System Developer at Bridgestone Tire Indonesia. Graduated from STMIK Akademi Bina Insani Bekasi 2012 majoring Information and Technology. Wish to always dedicated him self to IT in Indonesia and the world. Contact : [email protected] Blog : Polymorphic372.blogspot.com

Date post:	07-Jul-2015
Category:	Documents
Upload:	bambang-wiratmojo
View:	83 times
Download:	0 times

ALL NEW OOP 2014

Documents