35
Alloy Composition Details Alloys: EN AW-1050A Fe <= 0.40 Si <= 0.25 Zn <= 0.07 Ti <= 0.05 Mg <= 0.05 Mn <= 0.05 Cu <= 0.05 Other Elem <= 0.03 Al <= 99.50 All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-1050A
Fe <= 0.40Si <= 0.25Zn <= 0.07Ti <= 0.05Mg <= 0.05Mn <= 0.05Cu <= 0.05Other Elem <= 0.03Al <= 99.50
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-1200
Si+Fe <= 1.0Total Other <= 0.15Zn <= 0.10Other Elem <= 0.05Ti <= 0.05Mn <= 0.05Cu <= 0.05Al >= 99.00
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-2007
Cu 3.3 - 4.6Mg 0.40 - 1.8Pb 0.8 - 1.5Mn 0.50 - 1.0Zn <= 0.8Fe <= 0.8Si <= 0.8Total Other <= 0.30Ti <= 0.20Sn <= 0.20Bi <= 0.20Ni <= 0.20Other Elem <= 0.10Cr <= 0.10
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-2011
Cu 5.0 - 6.0Fe <= 0.7Pb 0.20 - 0.6Bi 0.20 - 0.6Si <= 0.40Zn <= 0.30Total Other <= 0.15Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-2014
Cu 3.9 - 5.0Mn 0.40 - 1.2Si 0.50 - 1.2Mg 0.20 - 0.8Fe <= 0.7Zn <= 0.25Zr+Ti <= 0.20Total Other <= 0.15Ti <= 0.15Cr <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
A Zr+Ti limit of 0.20 percent maximum may be used with this alloy designation for extruded and forged products only, but only when the supplier or producer and the purchaser have mutually so agreed. Agreement may be indicated, for example, by reference to a standard, by letter, by order note, or other means which allow the Zr + Ti limit.
Alloy Composition Details Alloys:
EN AW-2014A
Cu 3.9 - 5.0Mn 0.40 - 1.2Si 0.50 - 0.9Mg 0.20 - 0.8Fe <= 0.50Zn <= 0.25Zr+Ti <= 0.20Total Other <= 0.15Ti <= 0.15Ni <= 0.10Cr <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-2017A
Cu 3.5 - 4.5Mg 0.40 - 1.0Mn 0.40 - 1.0Si 0.20 - 0.8Fe <= 0.7Zr+Ti <= 0.25Zn <= 0.25Total Other <= 0.15Cr <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-2024
Cu 3.8 - 4.9Mg 1.2 - 1.8Mn 0.30 - 0.9Fe <= 0.50Si <= 0.50Zn <= 0.25Zr+Ti <= 0.20Total Other <= 0.15Ti <= 0.15Cr <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
A Zr+Ti limit of 0.20 percent maximum may be used with this alloy designation for extruded and forged products only, but only when the supplier or producer and the purchaser have mutually so agreed. Agreement may be indicated, for example, by reference to a standard, by letter, by order note, or other means which allow the Zr + Ti limit.
Alloy Composition Details
Alloys: EN AW-2030 Cu 3.3 - 4.5Pb 0.8 - 1.5Mg 0.50 - 1.3Mn 0.20 - 1.0Si <= 0.8Fe <= 0.7Zn <= 0.50Total Other <= 0.30Ti <= 0.20Bi <= 0.20Other Elem <= 0.10Cr <= 0.10
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-3003
Mn 1.0 - 1.5Fe <= 0.7Si <= 0.6Cu 0.05 -0.20Total Other <= 0.15Zn <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-3004
Mn 1.0 - 1.5Mg 0.8 - 1.3Fe <= 0.7Si <= 0.30Zn <= 0.25Cu <= 0.25Total Other <= 0.15Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-3005
Mn 1.0 - 1.5Fe <= 0.7Mg 0.20 - 0.6Si <= 0.6Cu <= 0.30Zn <= 0.25Total Other <= 0.15Ti <= 0.10Cr <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-3103
Mn 0.9 - 1.5Fe <= 0.7Si <= 0.50Mg <= 0.30Zn <= 0.20Total Other <= 0.15Zr+Ti <= 0.10Cr <= 0.10Cu <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-3105
Mg 0.20 - 0.8Mn 0.30 - 0.8Fe <= 0.7Si <= 0.6Zn <= 0.40Cu <= 0.30Cr <= 0.20Total Other <= 0.15Ti <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-5005
Mg 0.50 - 1.1Fe <= 0.7Si <= 0.30Zn <= 0.25Mn <= 0.20Cu <= 0.20Total Other <= 0.15Cr <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-5005A
Mg 0.7 - 1.1Fe <= 0.45Si <= 0.30Zn <= 0.20Total Other <= 0.15Mn <= 0.15Cr <= 0.10Other Elem <= 0.05Cu <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-5049
Mg 1.6 - 2.5Mn 0.5 - 1.1Fe <= 0.50Si <= 0.40Cr <= 0.30Zn <= 0.20Total Other <= 0.15Ti <= 0.1Cu <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-5052
Mg 2.2 - 2.8Fe <= 0.40Cr 0.15 -0.35Si <= 0.25Total Other <= 0.15Zn <= 0.10Mn <= 0.10Cu <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-5083
Mg 4.0 - 4.9Mn 0.40 - 1.0Fe <= 0.40Si <= 0.40Zn <= 0.25Cr 0.05 -0.25Total Other <= 0.15Ti <= 0.15Cu <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-5086
Mg 3.5 - 4.5Mn 0.20 - 0.7Fe <= 0.50Si <= 0.40Zn <= 0.25Cr 0.05 -0.25Total Other <= 0.15Ti <= 0.15Cu <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-5154A
Mg 3.1 - 3.9Mn+Cr 0.10 -0.50Mn <= 0.50Fe <= 0.50Si <= 0.50Cr <= 0.25Ti <= 0.20Zn <= 0.20Total Other <= 0.15Cu <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
0.0008 max Be for welding electrode and filler wire only.
Alloy Composition Details
Alloys: EN AW-5182 Mg 4.0 - 5.0Mn 0.20 -0.50Fe <= 0.35Zn <= 0.25Si <= 0.20Total Other <= 0.15Cu <= 0.15Ti <= 0.10Cr <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-5251
Mg 1.7 - 2.4Mn 0.10 -0.50Fe <= 0.50Si <= 0.40Total Other <= 0.15Ti <= 0.15Zn <= 0.15Cr <= 0.15Cu <= 0.15Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-5454
Mg 2.4 - 3.0Mn 0.50 - 1.0Fe <= 0.40Zn <= 0.25Si <= 0.25Ti <= 0.20Cr 0.05 -0.20Total Other <= 0.15Cu <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-5754
Mg 2.6 - 3.6Mn+Cr 0.10 - 0.6Mn <= 0.50Fe <= 0.40Si <= 0.40Cr <= 0.30Zn <= 0.20Total Other <= 0.15Ti <= 0.15Cu <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-6005A
Si 0.50 - 0.9Mg 0.40 - 0.7Mn+Cr 0.12 -0.50Mn <= 0.50Fe <= 0.35Cr <= 0.30Cu <= 0.30Zn <= 0.20Total Other <= 0.15Ti <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-6016
Si 1.0 - 1.5Mg 0.25 - 0.6Fe <= 0.50Zn <= 0.20Mn <= 0.20Cu <= 0.20Total Other <= 0.15Ti <= 0.15Cr <= 0.1Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-6060
Mg 0.35 - 0.6Si 0.30 - 0.6Fe 0.10 -0.30Total Other <= 0.15Zn <= 0.15Ti <= 0.10Mn <= 0.10Cu <= 0.10Other Elem <= 0.05Cr <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-6061
Mg 0.8 - 1.2Si 0.40 - 0.8Fe <= 0.7Cu 0.15 -0.40Cr 0.04 -0.35Zn <= 0.25Total Other <= 0.15Ti <= 0.15Mn <= 0.15Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-6063
Mg 0.45 - 0.9Si 0.20 - 0.6Fe <= 0.35Total Other <= 0.15Ti <= 0.10Zn <= 0.10Cr <= 0.10Mn <= 0.10Cu <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-6082
Si 0.7 - 1.3Mg 0.6 - 1.2Mn 0.40 - 1.0Fe <= 0.50Cr <= 0.25Zn <= 0.20Total Other <= 0.15Ti <= 0.10Cu <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-6106
Mg 0.40 - 0.8Si 0.30 - 0.6Fe <= 0.35Cu <= 0.25Cr <= 0.20Mn 0.05 -0.20Total Other <= 0.15Zn <= 0.15Ti <= 0.10Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-7010
Zn 5.7 - 6.7Mg 2.1 - 2.6Cu 1.5 - 2.0Zr 0.10 -0.16Total Other <= 0.15Fe <= 0.15Si <= 0.12Mn <= 0.10Ti <= 0.06Other Elem <= 0.05Ni <= 0.05Cr <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-7020
Zn 4.0 - 5.0Mg 1.0 - 1.4Mn 0.05 -0.50Fe <= 0.40Cr 0.10 -0.35Si <= 0.35Zr+Ti 0.08 -0.25Zr 0.08 -0.20Cu <= 0.20Total Other <= 0.15Other Elem <= 0.05
Al Remainder
All compositions in wt%.
Alloy Composition Details Alloys:
EN AW-7075
Zn 5.1 - 6.1Mg 2.1 - 2.9Cu 1.2 - 2.0Fe <= 0.50Si <= 0.40Mn <= 0.30Cr 0.18 -0.28Zr+Ti <= 0.25Ti <= 0.20Total Other <= 0.15Other Elem <= 0.05
Al Remainder
All compositions in wt%.
A Zr+Ti limit of 0.20 percent maximum may be used with this alloy designation for extruded and forged products only, but only when the supplier or producer and the purchaser have mutually so agreed. Agreement may be indicated, for example, by reference to a standard, by letter, by order note, or other means which allow the Zr + Ti limit.
