+ All Categories
Home > Documents > Anchor Zip 10 Suction Pump - specialistoffshore.com

Anchor Zip 10 Suction Pump - specialistoffshore.com

Date post: 22-Feb-2022
Category:
Upload: others
View: 3 times
Download: 0 times
Share this document with a friend
1
Contact us withyour customrequirement +61 8 9249 8882 | +61 427 080 404 | +61 416 281 516 [email protected]| www.specialistoffshore.com Specialist Offshore Services Pty Ltd TheSpecialist OffshoreServicesPtyLtdAnchor Zip10isauniqueproduct whichhasbeendevelopedusingthehighly successful ZipPumpandZipJet technologiesoriginatingfrom AdvanceMarineInnovation. TheAnchor Zip10hasprovenitself over theyearsfor suctionpileandcaissonwork, andanyjobwhichrequiresupto 9bar of differential pressure/suction. It hasabuilt inrelief valvethat canbeset tomaximum suctiontoprotect suction pilesandanchors. It isspecificallydesignedfor ROVdeployment andwill interfacewithmost workclassROVhydraulicsystems. Vehicles fittedwiththeAnchor Zip10will offer avery quick andcost effectiveway of installingandremovingsuctionanchors withnoneedtorecover for pumpchangeout. Output pressuresmayberegulatedtoensurethat differential pressures remainwithinthestructural lim itsof all typesof suctionanchor. Flow reversal for anchor recoveryiscleverlyandsimply achievedbyslidingthetopassemblyfrom theinput totheoutput sideof thecentrifugal pump. TheAnchor Zip10isaheavydutysuctionanchor pumpdesignedfor ROVsabletoproduce25HPof hydraulicpower. Tool Specifications Heavydutysystem for workvehicleapplications Flow reversal for anchor recoveryif needed Suctionrelief valvepre-set from 1to9.3bar Easilyinterfaced Ingeniousdurablemovingbodydesign ProvenZipJet technology Highefficiencyandperformance Worldwidesupport AnchorZip10SuctionPump HydraulicInput Pressure(maximum) 4000psi - 276Bar Flow(maximum) 15gpm - 70litres/minute Pressure/SuctionPerformance Differential Pressure Upto140psi - Upto9.5Bar Flow Upto80cubicmetres/hour at 7.5Bar General Anchor Port Connection 3” Ansi Flange Minimum HoseInternal Diameter 75mm (3in) ReverseActuator Minimum Pressure1000psi 70Bar Weight inAir 30Kg- 66lbs Weight inWater 14Kg 31lbs
Transcript
Page 1: Anchor Zip 10 Suction Pump - specialistoffshore.com

Contact us with your custom requirement+61 8 9249 8882 | +61 427 080 404 | +61 416 281 [email protected] | www.specialistoffshore.comSpecialist Offshore Services Pty Ltd

The Specialist Offshore Services Pty Ltd Anchor Zip 10 is a unique product which has been developed using the highlysuccessful Zip Pump and Zip Jet technologies originating from Advance Marine Innovation.

The Anchor Zip 10 has proven itself over the years for suction pile and caisson work, and any job which requires up to9 bar of differential pressure/suction. It has a built in relief valve that can be set to maximum suction to protect suctionpiles and anchors.

It is specifically designed for ROV deployment and will interface with most work class ROV hydraulic systems. Vehiclesfitted with the Anchor Zip 10 will offer a very quick and cost effective way of installing and removing suction anchorswith no need to recover for pump change out. Output pressures may be regulated to ensure that differential pressuresremain within the structural limits of all types of suction anchor. Flow reversal for anchor recovery is cleverly and simplyachieved by sliding the top assembly from the input to the output side of the centrifugal pump.The Anchor Zip 10 is a heavy duty suction anchor pump designed for ROVs able to produce 25 HP of hydraulic power.

Tool Specifications

Heavy duty system for work vehicle applications Flow reversal for anchor recovery if needed Suction relief valve pre-set from 1 to 9.3bar Easily interfaced Ingenious durable moving body design Proven Zip Jet technology High efficiency and performance Worldwide support

Anchor Zip 10 Suction Pump

Hydraulic InputPressure (maximum) 4000 psi - 276 BarFlow (maximum) 15 gpm - 70 litres/minute

Pressure/Suction PerformanceDifferential Pressure Up to 140 psi - Up to 9.5 BarFlow Up to 80 cubic metres/hour at 7.5 BarGeneralAnchor Port Connection 3” Ansi FlangeMinimum Hose Internal Diameter 75 mm (3 in)Reverse Actuator Minimum Pressure 1000 psi ‐ 70 BarWeight in Air 30 Kg - 66 lbsWeight in Water 14 Kg ‐ 31 lbs

Recommended