• Hose clamp
• Clevis
• Stainless steel screws / locking hex nuts
• Hose (not included)
HIGHLIGHTS
• Compatible with both 5/8” and 3/4” hoses.
• Includes rubber insert for 5/8” hose installations.
• Resists hose slippage caused by excessive use.
• Two-piece clamshell design with durable glass-filled nylon construction.
• Works with retractor systems, whether as a factory-installed dispenser option or as an after market field retrofit to islands.
• Swiveling clevis provides freedom of movement.
Anti-kink hose clamps help to prevent costly hose replacements and fines that damaged hoses can lead to. The clamp provides a five-point bolt-down system to fully secure the hose into place and prevent it from sliding out of position and coming into contact with the ground. Anti-kink hose clamps keep hoses up off the pavement and islands, and away from vehicle tires. Hose run-overs can inflict permanent damage leading to obstructed fuel and vapor flow paths and unnecessary forecourt hazards.
ANTI-KINK HOSE CLAMPS
SPECIFICATIONS
Components
1
2
4
HOSE ACCESSORIES
franklinfueling.com3760 Marsh Rd. • Madison, WI 53718, USATel: +1 608 838 8786 • Fax: +1 608 838 6433Tel: USA & Canada +1 800 225 9787 • Tel: UK +44 (0) 1473 243300Tel: Mex 001 800 738 7610 • Tel: DE +49 6571 105 308 • Tel: CN +86 10 8565 4566
© 2018 Franklin Fueling Systems, LLC. All Rights Reserved.
FFS-0645 02-18
Model Description
407924901 Anti-kink hose clamp for 5/8” and 3/4” hoses.
ORDERING INFORMATION
1
2
3
3
4
Note: The hose clamp includes a rubber insert for 5/8” hose installations, standard 3/4” hose does not require this insert for installation.