DIRECTIONS: From I-80 North of Youngstown, Proceed South on I-680 Approx. 1 Mile to Exit No. 2Meridian Road. Proceed West on Meridian 1 Block to Leharps Road, Turn Right & Proceed 1 Block to Sale Siteon Left. Watch for Auction Parking & Entrance Signs.

IMPORTANT NOTICE: Although information has been obtained from sources deemed reliable, theauctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information here-in contained. It is for this reason that buyers should avail themselves of the opportunity to make inspectionprior to the sale.

TERMS OF SALE: All equipment described herein will be sold “as is”, “where is” to the highest bid-der or bidders for cash in accordance with our regular terms and conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash, certified or cashier’s check payable to Cincinnati IndustrialAuctioneers, Inc., is required on all purchases. Firm and personal checks accepted only if accompaniedby a letter from your bank guaranteeing your funds. All sales are subject to state and/or local taxes unless asigned exemption form is presented at the time of purchase. All balances are due at the conclusionof the sale. No merchandise may be removed while the sale is in progress. All bidders must complywith our Standard Terms of Sale, copies of which will be available at the sale site or can be obtainedfrom our website.

MAIL IN BIDS: Mail in bids will be accepted with a 25% deposit.

A 12% BUYER’S PREMIUM IN EFFECT FOR THIS SALE.

(3) Vectrax Model GS20V Variable Speed Vertical Milling Machines

180 Ton X 14’ Columbia Model 180PB12 Mechanical Press Brake

Hill Acme No. 4 MechanicalIronworker

(3) Vectrax Model GS20V VariableSpeed Vertical Milling Machines

INSPECTION: Monday, May 24thfrom 10:00 AM to 4:00 PM

SALE DATETUESDAY, MAY 25TH

STARTING: 9:00 AM

FIRST CLASS MAIL!

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 3593

KING TOOL &MANUFACTURING

Featuring: (3) Vectrax Vertical Mills (2009), (5) Other VerticalMills, (6) Mechanical Press Brakes to 180 Ton & 12’, (5) Various

Lathes, Hill Acme Ironworker, Welders, Drills, Boring Mill,Surface Grinders, Saws, Presses, Misc. Machinery, Approx. (70) Machine Tools In Various Conditions,

Lift Trucks, Air Compressors, Shop & Office Equipment, 1982 Sea Ray 26’ Boat, Ford F-600 Stake Bed Truck

NEW2009

NEW2009

KING TOOL &MANUFACTURING

Plant Closed

KING TOOL &MANUFACTURING

3651 Leharps Road – Youngstown, Ohio 44515

COMPLETE METAL FABRICATING & CONVENTIONALMACHINE SHOP

Plant Closed

KING TOOL &MANUFACTURING3651 Leharps Road – Youngstown, Ohio 44515

Cincinnati Industrial Auctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214PHONE (513) 241-9701 / FAX (513) 241-6760INTERNET: www.cia-auction.com

SALE DATE:Tuesday, May 25th

Starting at 9:00 AMINSPECTION:

Monday, May 24thfrom 10:00 AM to 4:00 PM

AuctioneersCincinnati Industrial Auctioneers, Inc. - License No. 63-1983-10439

Jeffrey L. Luggen - License No. 57-1983-33789Jerome A. Luggen - License No. 52-1983-33799Jeffrey M. Luggen - License No. 2010-0000-26Joseph M. Luggen - License No. 2010-0000-19

John F. Rome - License No. 57-2000-84249

AuctioneersCincinnati Industrial Auctioneers, Inc. - License No. 63-1983-10439

Jeffrey L. Luggen - License No. 57-1983-33789Jerome A. Luggen - License No. 52-1983-33799Jeffrey M. Luggen - License No. 2010-0000-26Joseph M. Luggen - License No. 2010-0000-19

John F. Rome - License No. 57-2000-84249

5,000 LB Clark ModelGCS25MB LP Gas CushionTire Lift Truck

75 Ton Dake Model6-275 Hydraulic H-Frame Shop Press

8” X 20” Elliott Model921 Surface Grinder

1-1/2 HP BridgeportVariable SpeedVertical Mill

10 HP Ingersoll Rand ModelT30 Two-Stage HorizontalTank Air Compressor

60 Ton X 12’ Wysong Model 6510 Mechanical Press Brake90 Ton X 14’ Cincinnati Model 90-12 Mechanical PressBrake

180 Ton X 14’ Columbia Model 180PB12 Mechanical PressBrake

Ford F-600 Single Axle 24’ Straight Truck1982 Sea Ray 26’ Express Boat15” X 48” Clausing Colchester Geared Head Engine Lathe

King Tool & Manufacturing – Youngstown, Ohio Tuesday, May 25th, 9:00 A.M.

Partial View Table Lots Including: MachineAccessories, Tooling, Power Hand Tools

(75) Pieces (Approx.) Machine Tools In Various Conditions Held In Storage at Auction LocationUniversal Boring MachineHorizontal Boring Mill

PRESS BRAKES180 Ton X 14’ Columbia Model 180PB12Mechanical Press Brake; S/N W167-3, 14’ Bed& Ram, 146” Between Uprights, Palm Buttons

SEE PHOTO

90 Ton X 14’ Cincinnati Model 90-12Mechanical Press Brake; S/N 24642, 4”Stroke, 14’ Bed & Ram, 148” Between Uprights,Palm Buttons SEE PHOTO

60 Ton X 12’ Wysong Model 6510Mechanical Press Brake; S/N PB-12-129, 12’ X12 Ga. Bending Capacity, 3” Stroke, 5” Adj., 12”Max Die Space, 12’ Bed & Ram, 125” BetweenUprights, Air Clutch, Palm Buttons SEE PHOTO

50 Ton X 10’ Mfg. Unknown MechanicalPress Brake; S/N N/A, 10’ Bed & Ram, 104”Between Uprights

30 Ton X 54” Heim Model 30-4PFMechanical Press Brake; S/N 133, 54” Bed &Ram, 38” Between Uprights, Air Clutch

15 Ton X 4’ Verson Mechanical PressBrake; S/N 14162-16-48, 2” Stroke, 48” Bed &Ram, 32” Between Uprights

VERTICAL MILLINGMACHINES(3) Vectrax Model GS20V Variable SpeedVertical Milling Machines; S/N’s 966225,966224 & 966221, Acu-Rite DRO’s, Kurt PowerDraw Bars, Power Table & Knee Feeds, 10” X 54”Tables, 70-3600 RPM (New 2009) SEE PHOTO

1-1/2 HP Bridgeport Variable SpeedVertical Mill; S/N 11560, 10” X 54” Table, DRO,PTF, 60-4200 RPM SEE PHOTO

1-1/2 HP Bridgeport Variable SpeedVertical Mill; S/N 146257, 9” X 48” Table,Bridgeport Shaping Attachment2 HP Enco Sixteen-Speed Vertical Mill; S/NN/A, 10” X 54” Table, DRO, PTF, 78-4800 RPM1 HP Bridgeport Eight-Speed Vertical Mill;S/N 192057, 9” X 42” TableEnco Model 1060 Vertical Mill; S/N 0817, 6” X 31” Table

IRONWORKERHill Acme No. 4 Mechanical Ironworker;S/N 7904-127.01, 1-1/16” Thru 11/16” Dia. - 1”Thru 3/4” Dia. Punching Cap, 5/8” X 7” – 1/2” X8” - 3/8” X 8-1/2” Flat Shear Cap., 1-3/4” Round,1-1/2” Square, 4” X 4” X 1/2” Angle, Shear & EndCoping, Channel Shearing, Foot Pedal

SEE PHOTO

LATHES – ALL TYPES16” X 74” Hendy Geared Head EngineLathe; S/N 1415, 6” Chuck, 18-600 RPM,Tailstock15” X 48” Clausing Colchester GearedHead Engine Lathe; S/N 6/0015/18905, 10” 4-Jaw Chuck, 8” 3-Jaw Chuck, 25-2000 RPM,Steady Rest, Tailstock SEE PHOTO14” X 48” South Bend Engine Lathe;S/N 118473, 6” 3-Jaw ChuckGisholt No. 3 Turret Lathe; S/N 34202, 6-Position Turret, 30-1500 RPMWarner Swasey Model M-1420 TurretLathe; S/N 744878

DRILLS – ALL TYPES3’ Arm X 7” Col. Willis Bergonzi RadialArm Drill; 14” X 20” Drill Box

28” Cleerman Model 325 Sliding HeadDrill; 18” X 21” Table

20” Cincinnati Bickford Sliding Head Drill;16” X 20” Table

24” Cincinnati Three-Spindle ProductionDrill; 24” X 80” Table

20” Powermatic Model 1200 SingleSpindle Floor Drill; 16” X 18” Table

20” MSC Industrial Single Spindle FloorDrill; 16” X 18” Table

15” Delta Two-Spindle Production Drill;20” X 36” Table

SAWS – ALL TYPES20” Powermatic Model 87 Vertical BandSaw; S/N 18732, 24” X 24” Table

Oliver Model 94-DH Cold Cut-Off Saw;S/N 96396

12” X 14” Peerless Power Hack Saw; 2”Wide Blade

8” Delta Table Saw; Rip Fence, 16” X 24” Table

WELDERS – ALL TYPES350 Amp Lincoln Idealarc R3S-325 MigWelder; S/N AC441058

500 Amp Hobart Model R-500-S StickWelder200 Amp Westinghouse Model SA200Welding Power Source

MISC. MACHINERYUniversal Boring Machine HorizontalBoring Mill; 23” X 58” Table, 16-650 RPM, 7-1/2HP, 24” Vertical Travel SEE PHOTO

75 Ton Dake Model 6-275 Hydraulic H-Frame Shop Press; S/N 16672 SEE PHOTO

6” X 18” Boyar Shultz Model 618Challenger Surface Grinder; S/N C-1757

8” X 20” Elliott Model 921 SurfaceGrinder; S/N 3115 SEE PHOTO

6 Ton Hannifin Hydraulic Press; 8” Throat

20 Ton H-Frame Hydraulic Shop PressSimplex Single Spindle HorizontalFinishing Machine; Variable Speed Drive

V&O No. 50S OBI Press; S/N 50-S-205

Other Misc. Machinery Consisting of; 20”Cincinnati Shaper, 24” Gould Eberhardt Shaper,Trinco Blast Cabinet, 20” X 30” WheelabratorVibratory Parts Finishing Bowl, Nordson Model115 Glue Application Machine, Strippit Punch &Die Grinder

AIR COMPRESSORS10 HP Ingersoll Rand Model T30 Two-Stage Horizontal Tank Air Compressor;S/N 738234 SEE PHOTO

7-1/2 HP Worthington Single StageHorizontal Tank Air Compressor

LIFT TRUCKS5,000 LB Clark Model GCS25MB LP GasCushion Tire Lift Truck; S/N 0059-607FA7542, 2-Stage Mast SEE PHOTO

(2) 4,000 LB Clark LP Gas Cushion TireLift Trucks; 2-Stage Masts, Units Not In Service

BOAT & TRUCK1982 Sea Ray 26’ Express Boat;S/N 5026152, 260 HP Mercury Gas V-8 Engine;

S/N 6144961, Cuddy Cabin, Dining Area w/ Sink& Refrigerator, Restroom, Depth Finder, TrimTabs, Camper Top, 1723 Hours (No Trailer)

SEE PHOTO

Ford F-600 Single Axle 24’ Straight Truck;Vin #1FDNF60H9GVA08832, Five-SpeedTransmission, 223,337 Miles, Gas Engine, 24’Wood Deck Bed SEE PHOTO

MACHINERY IN STORAGE(75) Pieces (Approx.) Machine Tools InVarious Conditions Held In Storage atAuction Location Including; Bliss & NiagaraOBI Presses to 50 Ton, Multi-Spindle Drills,Chicago Riveters, Hendy Engine Lathe, HannifinPresses, Radial Arm Drills & Saws, Power HackSaws, Burgmaster Turret Drills, Punch Press Dies,Horizontal Mills & Many Other Items – HugePossible Scrap Opportunity

MACHINE ACCESSORIESMachine Accessories & Perishable ToolingConsisting of; 6” Mill Vises, 8” Rotary Table, 5-CSpin Fixtures & Collets, Tapping Heads, R-8Tooling, Drill Chucks, Adjustable Boring Heads,Drill & Toolmakers Vises, H.S. Drills, Taps, EndMills, Reamers, Pipe Dies & Many Other RelatedItems

SHOP EQUIPMENTLarge Quantity Assorted Shop EquipmentConsisting of; Hougen Mag Base Drill, Foley-Relsaw Blade Sharpener, Electric Angle Grinders &Drills, Pneumatic Hand Tools, Wrenches, Sockets,C-Clamps, Other Hand Tools, Bench Model SkilSaw, Enerpac Hand Pumps, Hold Down Straps,McCulloch Chain Saws, Benches, Cabinets,Shelving & Many Other Related Items

IMPORTANT AUCTION NOTICESHUGE POSSIBLE SCRAP OPPORTUNITY

Some of this Machinery May Be Sold forSalvage at the Auction

THIS WILL BE AN ONSITE ONLY AUCTIONProxy Bids will be accepted with

Proper Deposit