- FRANCE

We make intrumentation solutions for your industrial processes

ATEX PRODUCTS

4-20mA LOOP & PROCESS

A puissance 3 company - ATEX manufacturer since 1983 - http://apuissance3.com/eng - +33.5.57.97.17.97

Self-powered indicators through the current loop 4-20 mA loop powered thermometer 22mm Ø lights probe and light column Manual setpoint generator 2-wire RTD100 or thermocouples temperature transmi�er 2-wire poten�ometer input transmi�er 2-wire pulses/rpm/flow transmi�er w/Bluetooth Temperature converters Digital thermostat Temperature probes fi�ed with 4-20 mA transmi�er4-20mA loop power supply with galvanically isolated copy Power supply for relays, contacts, solenoid valves, indicators Associated interfaces for custom sensor Self-powered or powered galvanic isola�on Explosion proof envelope indicator Cable boxes - junc�on and connec�on boxes Grounding system

4-20mA transmi�er - condi�oner - indicators 4-20 mA loop powered indicators Self-powered thermometer 4-20mA with copying Programmable indicator with calcula�on func�onsManual setpoint generator 4-20mA Loop Portable Generator 2-wire Pt100 temperature transmi�er or thermocouples 2-wire poten�ometer transmi�er Universal 4-20 mA transmi�er w/Bluetooth RTD100 / thermocouples temperature converter Poten�ometer input to 4-20mA converter Voltage input to 4-20mA converterCharge amplifier for 4-20mA loop 4-20mA loop power supply Self-powered galvanic insola�on Galvanic isola�on with external power supplyThreshold relays

Custom made enclosures, cabinets and boxesfor explosive atmosphere zone 1 & zone 2

° Zone 1 or zone 2 enclosure for pneumatic island° Filtered pressure regulator option° Remote I/O option° Stainless steel enclosure or carbon fibre reinforced polyester ° Customization fitting customer needs° 94/9/EU & 2014/34/EU compliance° Declaration of conformity supplied° ATEX validated production QA

° HMI & PLC enclosure for ATEX zone 2° Junction boxes Ex e° Connection boxes° Control boxes° Supporting arm system

Made in France

A puissance 3 company - ATEX manufacturer since 1983 - http://apuissance3.com/eng - +33.557.97.17.97

ATEX atmosphere secured groundingEliminating electrostatic chargesfrom mobile containers

Grounding plug with or without safety automation

Mobile and self-powered version MATIS-SDE4-NOMAD

1 channel or 2 channels versionsSeparate power supply MATIS-SDE4-ALIB

Safety automa�on op�on MATIS-SDE4-NOMADAUTO

15 m winder op�on MP3...EX / MP4...EX

MATIS-6F22 Power supply sourceop�on for MATIS-NOMAD

Tanker / Truck

Wagon

Mixer / Filling machine

Drum barrel

Hard and flexible intermediate bulk container

Uses MATIS range

A puissance 3 company - ATEX manufacturer since 1983 - http://apuissance3.com/eng - +33.5.57.97.17.97

Ex ia sensor / transmitter connection with anIntrinsic safety interface

Temperature

Pressure

Flowmeter

Level

Analyse

XT2 wires

Ex ia transmitter

Power & interface Ex ia sensor / transmitter in ATEX atmosphere

Intrinsic Safety (IS) analog interface type PROFSI3

- IS sensor power-in- Ex ia sensor protection- 4-20 mA analog measurement copy- HART protocol compliant- Galvanic isolation for the IS current loop- PLC pre-wired by modulo 8

HE10

Analog sensor

Connection between ATEX Ex ia proximity switches,ATEX Ex ia solenoid valve and ATEX interface

Ex ia inductif feedback

Ex ia solenoid valve

Regulate a pneumatic valve in ATEX zone with a IS solenoid valve and IS inductive NAMUR proximity switches

Intrisic Safety (IS) digital interface type NAEV30

- Compatible with all type of NAMUR Ex ia proximity switch- Compatible with most of Ex ia solenoid valve- 2 or 4 dry contact or IS NAMUR inductif input- 2 or 4 IS load driver output- PLC pre-wired by modulo 4,8,16 or 32 channels- Easy wiring and commissioning

HE10

NAEV30

ON / OFF Valve control

Drive a continuous control valve witha ATEX ia Hart positioner

2 wires 4-20 mA

2 wires 4-20 mA

Hart Ex iapositioner

PROFSI2-25082-AWP-NSH

Control an ATEX Ex ia Hart positioner on a continuous controlvalve in ATEX atmosphere

Intrinsic safety analog interface type PROFSI2-NSH- Intrinsic safety power supply for the positioner- 13 Volts power supply over 20 mA- 650 ohm max. load- Hart positioner compatible- Galvanic isolation of the driving signal- Full guaranteed interoperability with the positioner

IS

None ISMade in France

Continuous control valve

Designed for ATEX 2014/34/EU directive compliance.All ATEX electric motors must be thermally protected

Mechanical threshold

ATEX bimetallic +

ATEX digital interface

ATEX zone 1 certified

Switching threshold at 120°CHysteresis of 30°C

Aluminium body

Screw fixing M6 x 8 mm

cost-effective

digital threshold

ATEX RTD100 probe witha pod attachment +

ATEX digital thermostat

ATEX zone 1 certified

USB threshold setting

Factory threshold setting : 120°C

Global accuracy 5°C

Brass body

Total MTBF : 90 Years

Thermal protection for ATEX electric motor

Application overview for ATEX atmosphere

PROFSI3

Industrial process applications examples

A puissance 3 companyZA Les Pins Verts - 1 allée de Migelane F-33650 SAUCATS - FRANCE

Tél : +33 (0)5 57 97 17 97 - e-mail: contact@ap3.fr - www.apuissance3.com/eng

ATEX IS Pure water flow metering

Paddle-wheel flow sensorFor ATEX zone 1Pipe diameters from 1/4" to 2 1/2"ASME/DIN/ISO/SMSWeld ends connection

Flow transmitterATEX zone 12 wires 4-20 mA outputBluetooth 5.0 setting

ATEX analog interfaceLoop power supplyGalvanic isolation4-20 mA active feeback

rev 01 - Feb 2020 - Subject to altera�ons