API 570
May 2004
Introduction
The Saudi Aramco Job Training Standard is the basis for training and certification of Saudi Aramco employees for the job of Inspector…
Introduction
The AJTS specifies the job tasks which every Inspector in the company is expected to be able to perform, each task performed on the job…
The standard to which each task must be performed is to meet the minimum requirements of the AJTS…
Common Terms
• Do what?...
• When?...
• With what?...
• How well?...
Job Task 2.01 Inspect Weld Joint Preparation
• Do What ?
Visually inspect a weld set up and the weld joint preparation
• When?
Before the actual welding begins
Job Task 2.01 Inspect Weld Joint Preparation
• With What ?
Weld set up, inspection tools, drawings, and welding procedures
• How well?
To the applicable Saudi Aramco and Industry Standards
Job Profile Plant and Equipment Inspector
An Inspector performs inspections and records the results of those inspections according to the applicable standards….
Job Duties ( P& EW Inspector)
• 1.00 Inspect Plant piping
• 2.00 Inspect Welds and Welding
• 3.00 Performing Paints and Coating Inspections
• 4.00 Performing Inspection of Pressure Tanks
• 5.00 Performing Other Inspections
• 6.00 Maintaining Records and Communications
Job Profile Electrical Inspector
An Electrical Inspector performs inspections and records the results of those inspections according to the applicable standards….
Job Duties (Electrical Inspector)
• 1.00 Performing Power Distributing Inspections
• 2.00 Inspecting Conduit and Cable Installations
• 3.00 Inspecting Conductors
• 4.00 Inspecting Groundings
• 5.00 Inspecting Cathodic Protection Installations
• 6.00 Inspect Light Fixtures and Lighting Systems
• 7.00 Inspecting Other Electrical Installations
• 8.00 Maintaining Records and Communications
Job Profile Civil Plumbing Inspector
A Civil/Plumbing Inspector performs inspections on Saudi Aramco civil installations and records results of those inspections according to the applicable standards….
Job Duties (Civil/Plumbing Inspector)
• 1.00 Inspecting Earthwork
• 2.00 Inspecting Concrete
• 3.00 Inspecting Structures
• 4.00 Testing
• 5.00 Inspecting Asphalt
• 6.00 Inspecting Civil Plumbing
• 7.00 Inspecting Civil HVAC
• 8.00 Communication
Job Profile NDE Technician
An NDE Technician performs inspections on Saudi Aramco installations and records results of those inspections according to the applicable standards….
Job Duties (NDE Technician)
• 1.00 Performing Magnetic Particle Testing
• 2.00 Performing Dye Penetrant Testing
• 3.00 Performing Ultrasonic Testing
• 4.00 Performing Radiography
Usual Job Conditions
The following work conditions apply to the work of a plant and Equipment Inspector. These conditions apply during performance of most job tasks in this AJTS…
Work Environment
An Inspector works in an office part of the time, but he works in the field most of the time…
Tools, Equipment and Supplies
The primary tool of an inspector is the Saudi Aramco and Industry Standards. The second most important tool is the inspectors natural ability to note indications and deviations from the standards…
Tools, Equipment and Supplies
The Inspector acquires his own hand tools…
Task Steps for Job Task 2.01 Inspect Weld Joint Preparation
Task Steps for Job Task 2.01 Inspect Weld Joint Preparation
Task Steps for Job Task 2.01 Inspect Weld Joint Preparation
Job Task List
Date
Evaluator Signs here
Employee Signs Here (first)
Task Steps for Job Task 2.05 Monitor Post Weld Heat Treatment
Job Task List
Date
Evaluator Signs here
Employee Signs Here (first)
Thank you for your attention