Date post: | 28-Jan-2015 |
Category: |
Technology |
Upload: | lemasney-consulting |
View: | 126 times |
Download: | 3 times |
Arduino and Raspberry PiAn introduction to making and the make movement.
What is an Arduino?
Getting started with Arduino
http://www.ladyada.net/learn/arduino/lesson1.html
/* Blink Turns on an LED on for one second, then off for one second, repeatedly. This example code is in the public domain. */
// Pin 13 has an LED connected on most Arduino boards.// give it a name:int led = 13;
// the setup routine runs once when you press reset:void setup() { // initialize the digital pin as an output. pinMode(led, OUTPUT); }
// the loop routine runs over and over again forever:void loop() { digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level) delay(1000); // wait for a second digitalWrite(led, LOW); // turn the LED off by making the voltage LOW delay(1000); // wait for a second}
Arduino demo
Let’s try it!
Resources for Arduino
http://youtube.comhttp://ladyada.nethttp://arduino.cc
What is a Raspberry Pi?
Take a look at this
http://makezine.com/2013/04/14/47-raspberry-pi-projects-to-inspire-your-next-build/
Resources for Raspberry Pi
http://www.raspberrypi.org/faqshttp://en.wikipedia.org/wiki/Raspberry_Pihttp://ivanx.com/raspberrypi/
Raspberry Pi Demo
Let’s try it!