ASBESTOS REMOVAL PRODUCTS - smhequipments.comsmhequipments.com/documents/scott_asb_eng_2006.pdf ·...

Contents

Scott Asbestos Removal Products Price List 2006 £Issue 1 �

Proflow SC Asbestos

PROFLOW SC ASBESTOSSpare parts 3Accessories 3Ready-packs including blower, battery, charger, belt, 80 cm angle piece hose, facepiece and filters 2 x Pro2000 PF10 P3: 3Ready-packs including blower, battery, charger, belt, 100 cm straight hose, facepiece and filters 2 x Pro2000 PF10 P3: 3PROMASK 3SARI FULL FACE MASK 3PRO2000 FILTERS 3

Phantom PPR 2000

PHANTOM PPR2000PHANTOM PPR2000 POWERED RESPIRATOR 4Filters 4Prefilters and filter accessories 4PHANTOM SPARES / ACCESSORIES 4

Powerpak

POWERPAKPOWERPAK POWERED RESPIRATOR 5FULL FACEMASKS 5POWERPAK FILTERS 5POWERPAK SPARES / ACCESSORIES 5

RAS Asbestos

AIRLINERAS ASBESTOS AIRLINE EQUIPMENT 6RAS ASBESTOS FACEMASKS 6

Half Masks

Profile² Half Mask 7Profile60 Silicone Half Mask 7Promask² Full Facemask, for twin Pro² Cartridges 7Pro² Cartridges, pairs 7Accessories for half masks 7Profile² Half Mask Ready-Paks 8Profile40 Half Mask, silicone, 40mm thread connection 9Pro2000 filters for Profile40 (maximum weight 300g) 9

Notes

Please enter your notes here 10

IMPORTANT

N.B. Please note where a part code is written in the UK or Finland part code columns only, that part is only available to order from that particular customer service site Where a part code is written in both UK and Finland part code columns, that part can be ordered from either UK or Finland Customer Services.

Notes

Scott Asbestos Removal Products Price List 2006 £Issue 1�

Proflow SC Asbestos


Part Code Description Standard Pack £ Pack £ Unit

PROFLOW SC ASBESTOS

064045 Proflow SC Asbestos 160 l/min, 80 cm angle hose, pvc belt, high efficiency battery EN 12942 1 512.10

064368 Proflow SC Asbestos 160 l/min, 100 cm straight hose, pvc belt, high efficiency battery EN 12942 1 525.70

Spare parts

064055 Blower body without belt 1 37 55

064056 Blower 160 PF SC Asbestos 1 279.20

063594 Body tensioner PF 1 4.10

063799 Hose for Autoflow and Proflow with angle piece connection 1 27.00

063598 Hose PF 80 cm 1 25.25

064098 Hose PF 100 cm 1 39 00

064043 Battery NiMH 9,6 V/4.5 Ah for Proflow 1 91.00

063791 Recharging device Proflow SC, Proflow2, Proflow3 and Proflow EX. Prim.: 230 V - 50 Hz, Sek.: 4,8-12 V max 700 mA

1 63 00

063595 O-Ring 1 0 80

Accessories

062996 PVC-belt 1 16.20

Ready-packs including blower, battery, charger, belt, 80 cm angle piece hose, facepiece and filters 2 x Pro2000 PF10 P3:

064331 Ready pack with Full face mask Promask, black EN 12942 1 595 00

064332 Ready pack with Full face mask Promask size S, black EN 12942 1 595 00

TBA Ready pack with Full face mask Promask, yellow silicone EN 12942 1 605 00

TBA Ready pack with Full face mask Promask size S, yellow silicone EN 12942 1 605 00

064333 Ready pack with Full face mask Sari NR, natural rubber EN 12942 1 580 00

Ready-packs including blower, battery, charger, belt, 100 cm straight hose, facepiece and filters 2 x Pro2000 PF10 P3:

064372 Ready pack with Full face mask Promask, black EN 12942 1 608 00

064373 Ready pack with Full face mask Sari NR, natural rubber EN 12942 1 593 00

PROMASK

012681 Promask, black EN 136 1 75 85

012670 Promask, black, Small EN 136 1 75 85

012882 Promask SIL, yellow silicone EN136 1 85 50

TBA Promask SIL S, yellow silicone, small EN136 1 85 50

SARI FULL FACE MASK

011680 Full face mask Sari, natural rubber (NR) EN 136 1 58 75

PRO2000 FILTERS

Minimum sales package of Pro2000 filters is a box of 20 pcs.

052670 PF 10 P3 (20) EN 143 1 89 00 4 45

Proflow SC Asbestos

Phantom PPR 2000



PHANTOM PPR2000

PHANTOM PPR2000 POWERED RESPIRATOR

PPR2000 Phantom Powered Respirator, with electronic flow enhancement, complete with flow indicator, 1 filter, instructions, belt & storage boxes

EN147 1 426.30

PPR2000/A As above, without belt & storage boxes EN147 1 389 00

PPR2/BC/SM Smartcharger for PPR2000 models only (UK, Euro, Aus) 1 64 00

PPR2/BC/SM/10 10 station smartcharger for PPR2000 models only (UK, Euro, Aus) 1 935 00

Filters

PF251/2 TM3PSL high efficiency particulate filter - 20 EN147 1 199.00 9 95

Prefilters and filter accessories

RXPF/PACK Prefilters Pro2000/PF251/TF200 (20) 1 7 45

RXPF/HOLDER 2 Prefilter holders + 6 pads 1 4 75

SPARK/ARRESTS 2 holders + 2 grilles 1 4 75

PRO2/BLANK/COVER 2 filter covers 1 2.85

TBA Rubber shower cover 1 10.60

PHANTOM SPARES / ACCESSORIES

2015897 Facemask storage box and lid 1 9 95

2015899 Large System storage box and lid 1 15.60

BAG/PPR Holdall 1 15.60

ECWB Waist belt 1 12.65

PPR/BATT/ALARM Electronic battery pack for all PPR2000 1 135.80

PPR/MOTOR Fan blower, complete with lead for PPR2000 1 114.75

2016247 Flowtest Adaptors (10) for old flowtester to be used with large inlet PF251/2 filter 1 8 70

2016246 Motor housing mask insert (10) 1 17.50

008.017.99 Buckle pack (5) 1 12.20

025.033.02 Battery for standard Phantom ( old PPR1 ) 1 123.85

025.291.99 Battery clip for new type batteries ( post 1995 ) 1 5.20

034.029.01 Blower for standard Phantom ( old PPR1 ) 1 118.10

RXPBC/3 Single charger for old PPR1 with UK plug 1 47 30

RXPBC/2 Single charger for old PPR1 with Euro plug 1 47 30

071.102.90 Visor & visor guard anti-scratch/anti-mist for all Phantoms 1 19.20

071.105.99 Clamp & screwpack for visor 1 17.15

071.120.98 Head harness 1 17.60

071.126.99 Neckstrap assembly 1 4 60

071.270.99 Button pack (7) 1 5 40

071.302.99 Nose support pack (5) 1 5.25

071.345.03 Facemask complete with visor, valve assembly, harness 1 124.15

074.101.02 Tub of “O” Ring grease 1 6 55

089.176.02 Flow indicator for STD/IS 1 26.75

095 048 00 Annual Service pack (1 filter seal, 1 motor “O” ring, 1 valve cover, 1 tub grease) 1 12.65

RXFTA/PPR Fit test adapter for Portacount testing of all Phantom models 1 57 75

Phantom PPR 2000

Powerpak


Powerpak


POWERPAK

POWERPAK POWERED RESPIRATOR

RPM92/4 Standard Powerpak c/w hose, flow indicator, belt (no mask) in storage case prEN147 Rev 1 336 75

Approved with Vision RFF4000 and RFF60 masks in all sizes. Order separately

RPFF92/4/60 Standard Powerpak c/w RFF60 ML silicone full facemask prEN147 Rev 1 435 50

Supplied in storage cases c/w full facemask, EPDM hose, flow indicator and belt. Order charger separately.

RXBC92/3 Battery charger (UK plug). Specify /2 for Euro plug 1 66 45

RXPP92/4/U Standard Powerpak, power unit only 1 247.85

FULL FACEMASKS

RFF4000 M/L Vision, silicone, side fit, M/L EN136 1 120.00

RFF4000 M Vision, silicone, side fit, M EN136 1 120.00

RFF4000 S Vision, silicone, side fit, S EN136 1 120.00

RFF60/MS Gemini, silicone, front fit, MS EN136 1 108.00

RFF60/ML Gemini, silicone, front fit, ML EN136 1 108.00

POWERPAK FILTERS

NB: PART NUMBERS REFER TO 1 PACK ON FILTERS/SPARES

RC300/13 Powerpak TM3 A1 filter prEN147 Rev 1 18.75

RC340/13 Powerpak TM3 A1 PSL filter prEN147 Rev 1 26.10

RC341/13 Powerpak TM3 B1 PSL filter prEN147 Rev 1 31.45

RC343/13 Powerpak TM3 K1 PSL filter prEN147 Rev 1 31.45

RC351/13 Powerpak THP2/TM3 PSL filter prEN147 Rev 1 11.85

RXPPF81 Powerpak pre-filter (10) 1 8.20

POWERPAK SPARES / ACCESSORIES

BAG/PPR Holdall -black 1 15.60

RM00080 Spare battery assembly for Powerpak/Turbomaster (except I.S.) 1 54 60

PPFI92 Flow indicator for full facemask Powerpaks 1 11.90

RM00030/M Filter screw retaining ring for all Powerpaks/Turbomaster (green) 1 3 30

RM00500 Standard louvred cover/pre-filter retainer for all Powerpaks (green) 1 2.30

RM00510 Combined filter louvred cover/pre-filter retainer for all Powerpaks (green) 1 2.40

RM00651 Shower cover 1 2.25

ECWB Waist belt 1 12.65

KIT 88/5 Replacement hose kit (EPDM rubber) for old type Powerpaks (RPFF88) 1 33 50

RXBH/SA/2 Replacement hose kit (EPDM rubber) for new type RPFF92 Powerpaks 1 41.20

KIT88/3 Kit comprising backplate, screws and washers for old type Mk2 Powerpak units (1988-92) 1 6.25

RM00604 Kit comprising backplate, screws and washers for new replaceable battery Powerpaks 1 7.20

KIT88/4 Motor kit c/w gasket and mounting screws for all standard Mk2 Powerpak units (not suitable for pre 1988 units with straight outlet)

1 116.65

RXFTA/STAN Fit test adapter for all standard thread masks (requires EC251R filter) 1 57 75

RAS Asbestos


RAS Asbestos


AIRLINE

RAS ASBESTOS AIRLINE EQUIPMENT

2008235 Respirator airline apparatus comprising Tempest automatic positive pressure demand valve, supply hose and airline connection manifold mounted on fully adjustable bandolier harness

EN139 1 325.00

Apparatus is fitted with in-line coalescing fliter for removal of particulate contamination down to 0.5 microns and medium pressure warning whistle. CEN type airline connection hose.

Supplied with blanking cap and lanyard for respirator cartridge and DIN 40 blank plug for mask. Please select required facemask from list below.

Apparatus CE marked to EN139.

RAS ASBESTOS FACEMASKS

2001746 Vision 3 positive pressure facemask for use with RAS system, 5 point fully adjustable head harness, featuring a left hand bayonet fitting for the demand valve and right hand DIN40 fitting with inhale valve for respiratory cannister

1 175.00

071.335.02 PanaSeal positive pressure facemask in black Neoprene with 5 point, fully adjustable head harness. features left-hand bayonet fitting for demand valve and right hand DIN40 fitting c/w inhale valve for respirator cannister

1 175.00

071.350.07 PanaSeal positive pressure facemask in blue silicone with 5 point, fully adjustable head harness. features left-hand bayonet fitting for demand valve and right hand DIN40 fitting c/w inhale valve for respirator cannister

1 175.00

Apparatus supplied less filter canister.

Please refer to appropriate pricelists for details of airline filter units, supply hoses and portable airline supply equipment.

084.059.01 Breathing apparatus log book - Industrial version 1 6 43

2008437 RAS user instruction manual - English 1 7 50

033.113.99 Spare filter cartridge for in-line filter 1 41.82

2009813 Complete Filter assembly 1 90 00

033 080 99 Filter for pigtail, spares pack (2) 1 9.11

021.040.99 CEN plug connector 1 15.00

072.031.99 Dustcap for CEN coupling 1 5.25

071.280.99 DIN 40 blank plug 1 4.91

2014276 Spare Bandolier For RAS asbestos 1 53 04

Half Masks


Half Masks

Part Code Part Code Description Standard Pack £ Pack £ Unit

Profile² Half Mask

Note: Pack quantities may change during 2006. Unit prices are not affected.

5032072 032072 Profile², S EN140 30 285.00 9 50

5032071 032071 Profile², M EN140 30 285.00 9 50

5032070 032070 Profile², L EN140 30 285.00 9 50

Profile60 Silicone Half Mask

TBA TBA Profile60 M/L, silicone EN140 1 19.95

TBA TBA Profile60 S/M, silicone EN140 1 19.95

Promask² Full Facemask, for twin Pro² Cartridges

TBA 012890 Promask², silicone EN136 1 85 50

TBA TBA Promask² S, silicone, small EN136 1 85 50

Pro² Cartridges, pairs

5053070 053070 PF Pro² P3 EN143 25 123.75 4 95

5044070 044070 GF Pro² A1 EN14387 25 136.25 5 45

5044071 044071 GF Pro² A2 EN14387 25 148.75 5 95

5044072 044072 GF Pro² A1B1E1 EN14387 25 146.25 5 85

5044073 044073 GF Pro² A1B1E1K1 EN14387 25 173.75 6 95

5044080 044080 CF Pro² A1P3 EN14387 25 238.75 9 55

5044081 044081 CF Pro² A2P3 EN14387 25 255.00 10.20

5044082 044082 CF Pro² A1B1E1P3 EN14387 25 248.75 9 95

5044083 044083 CF Pro² A1B1E1K1P3 EN14387 25 273.75 10.95

Accessories for half masks

TBA 030596 Disposable Hood 1 7 95

TBA 030545 Belt Pouch, with belt 1 13.55

2015897 TBA Facemask storage box and lid 1 9 95

Profile2 P3 Profile2 A2

Profile2 ABEKP3 READY-PAK

Half Masks



Profile² Half Mask Ready-Paks

Note: Pack quantities may change during 2006. Unit prices are not affected.

5032170 032170 Profile² S + Pro² P3 EN140/EN143 28 418.60 14.95

5032173 032173 Profile² M + Pro² P3 EN140/EN143 28 418.60 14.95

5032176 032176 Profile² L + Pro² P3 EN140/EN143 28 418.60 14.95

5032171 032171 Profile² S + Pro² A1P3 EN140/EN14387 28 558 60 19.95

5032174 032174 Profile² M + Pro² A1P3 EN140/EN14387 28 558 60 19.95

5032177 032177 Profile² L + Pro² A1P3 EN140/EN14387 28 558 60 19.95

5032181 032181 Profile² S + Pro² A2P3 EN140/EN14387 28 572.60 20.45

5032184 032184 Profile² M + Pro² A2P3 EN140/EN14387 28 572.60 20.45

5032187 032187 Profile² L + Pro² A2P3 EN140/EN14387 28 572.60 20.45

5032172 032172 Profile² S + Pro² ABEK1P3 EN140/EN14387 28 602.00 21.50

5032175 032175 Profile² M + Pro² ABEK1P3 EN140/EN14387 28 602.00 21.50

5032178 032178 Profile² L + Pro² ABEK1P3 EN140/EN14387 28 602.00 21.50

Particle Filters

Gas Filters

Combined Filters

Pro2 P3

Pro2 A1

Pro2 A1B1E1K1-P3Pro2 A1B1E1-P3Pro2 A2-P3Pro2 A1-P3

Pro2 A2 Pro2 A1B1E1 Pro2 A1B1E1K1

Half Masks



Profile40 Half Mask, silicone, 40mm thread connection

TBA TBA Profile40 M/L, silicone EN140 1 15.50

TBA TBA Profile40 S/M, silicone EN140 1 15.50

Pro2000 filters for Profile40 (maximum weight 300g)

Supplied in packs of 20

EC251R 052670 PF10 P3 FILTER 052670 (20) EN 143 20 89 00 4 45

EC200R 042870 GF22 A2 FILTER 042870 (20) EN 14387:2004 20 108.00 5 40

EC201R 042871 GF22 B2 FILTER 042871 (20) EN 14387:2004 20 137.00 6 85

TBA 042874 GF22 A2B2 FILTER 042874 (20) EN 14387:2004 20 130.00 6 50

EC203R 042873 GF22 K2 FILTER 042873 (20) EN 14387:2004 20 124.00 6.20

EC219R 042970 GF32 AX FILTER 042970 (20) EN 14387:2004 20 177.00 8 85

EC220R 042670 CF22 A2P3 FILTER 042670 (20) EN 14387:2004 20 183.00 9.15

EC221R 042671 CF22 B2P3 FILTER 042671 (20) EN 14387:2004 20 203.00 10.15

TBA 042674 CF22 A2B2P3 FILTER 042674 (20) EN 14387:2004 20 198.00 9 90

EC230R 042678 CF22 A2B2E1P3 FILTER 042678 (20) EN 14387:2004 20 232.00 11.60

EC223R 042673 CF22 K2P3 FILTER 042673 (20) EN 14387:2004 20 196.00 9 80

Combined Filters

CF22 K2 P3CF 22 A2B3P3CF22 B2-P3CF 22 A2-P3 CF 22A2B2E1-P3

Gas Filters

GF 22 A2 GF 32 AXGF 22 K2GF22 A2B2GF 22 B2

Particle Filters

PF10

Notes

Scott Asbestos Removal Products Price List 2006 £Issue 1�0

Please enter your notes here Notes

Notes

Scott Asbestos Removal Products Price List 2006 £Issue 1 ��

Terms and Conditions of Sale

Scott Asbestos Removal Products Price List 2006 £Issue 1��

Terms and Conditions of Sale - Scott Ltd

Preliminary and General1. The Terms and Conditions contained herein shall govern all contracts of the sale of goods by Scott Ltd (hereinafter

called “the Company”). Unless otherwise agreed in writing by the Company these conditions shall override any terms or conditions stipulated, incorporated or referred to by the intending buyer (herein called “the Customer”) in his order or negotiations

2. No additional item nor any cancellation, variation or waiver of any Term or Condition stated herein shall be binding upon the Company unless confirmed in writing under the hand of a Director or the Secretary of the Company.

3. No person save an authorised official of the Company has authority to negotiate or give any commitment on behalf of the Company or to make or give any warranty, representation or undertaking as to the availability, description, price, quality or performance of any goods supplied by the Company which would or might (but for this Condition) involve the Company in any legal liability whatsoever

4. Particulars in any Quotation submitted by the Company and any specifications, illustrations, drawings or other information made available to the Customer shall have no contractual effect. Such particulars and information are supplied for general guidance only and should not be relied on by the Customer who should ascertain that any goods to be supplied by the Company accord in every way with his requirements.

5. Orders from customers outside the United Kingdom cannot be accepted by the Company until all export and import documents have been received by the Company at Pimbo Road, West Pimbo, Lancashire. The Company enters into no obligation to obtain any such documents

Minimum Order Value 6. The minimum order value is £350. Carriage charges applicable for non ex works deliveries will be confirmed with each

order

Delivery Times7. All delivery times stated in any Quotations are estimates only and are based upon conditions ruling at the date of such

Quotation. All times so stated or specified in any contract are for delivery ex-works. While reasonable efforts are made by the Company to deliver within any time specified in any contract the Company shall be under no liability whatsoever for any loss suffered by the Customer whether directly or indirectly as a result of any delay in delivery whatsoever.

8 In the event of delivery of goods or any part thereof being delayed hindered or prevented by the reason of the conse-quence of any strike, lock-out, combination of workmen or other labour dispute, scarcity of materials or labour, failure of plant, machinery, fire, accident or Act of God or the intervention of Governments, war, riots, epidemics or adverse weather conditions or any cause whatsoever beyond the control of the Company the Customer shall, notwithstanding any delay, accept the goods on delivery by the Company. Provided that if such delay, hindrances or prevention as aforesaid shall exceed 14 days the Company shall be at liberty to cancel any Order or part thereof and any contract shall insofar as it relates to goods the subject of such cancellations aforesaid become of no effect

Price9.1 All prices included in any Quotation and all prices agreed in any contract are based on costs ruling at the date of such

quotation or contact respectively. In the event of any increase in such costs between such dates and delivery of the goods (even if such delivery be delayed) and in particular in the event of any increase in the costs of labour, materials or over-heads (including costs resulting from the imposition or increase of any tax, levy or duty) or other costs whatsoever where the increase is beyond the control of the Company the Company shall be entitled to increase any such price amount as is reasonable having regard to such increase in costs. Save where expressly agreed to the contrary in any Trade Agreement entered into by the Company, any such increase as aforesaid may be applied with Notice to the Customer.

9.2 Unless otherwise specified all prices are in pounds sterling.10. Unless otherwise specified all prices stated in any Quotation or agreement in any contract do not include the costs of

packing and carriage or Value Added Tax (where applicable). All contracts entered into are subject to INCOTERMS 1990.

Carriers11. Arrangements for carriage by any reasonable means at the Company’s option will be made by the Company as agents for

the Customer and delivery to any carrier pursuant to any arrangement so made shall constitute delivery to the Customer.

Returned Goods12. Any goods to be returned for any reason, must be notified to the Company and will only be accepted by a member of the

Company’s Customer Support Department for a member of the Sales Team. The goods in question will only be accepted back if they comply to a 100% quality check at the date of return. The Company reserve the right to levy a handling charge

Liability13. The Company shall not be liable to the Customer:- (i) for shortages in quantity delivered or damage to the goods in transit unless the customer notifies the Company and the

carrier of any claim for short delivery or damage to goods within seven days of receipt of the goods (ii) for loss of goods or any part thereof in transit (where the goods are carried by the Company’s own transport or by a

carrier on behalf of the Company) unless the Customer shall notify the Company and the carrier (if any) immediately upon the expiry of seven days from the date of despatch of the goods.

(iii) for defects in the goods caused by fair wear and tear, abnormal conditions of storage, or use or any act neglect or default of the Customer or any third party.

(iv) for other defects in the goods unless notified to the Company within six months of delivery of the goods by the Company (or where the defect would not be apparent on reasonable inspection within 12 months of delivery).

14. Subject only as otherwise herein provided all conditions, warranties and representations, express or implied, (and whether by statutes, common law or otherwise) in relation to the goods are hereby excluded and the Company shall be under no liability to the Customer for any loss, damage or injury, direct or indirect resulting from defective material, faulty workman-ship or otherwise howsoever arising and whether or not caused by the negligence of the Company its employees or agents SAVE THAT the Company shall accept liability for death or personal injury caused by the negligence of the Company.

15. The Company’s prices are determined on the basis of the limits of the liability set out in Clauses 13 and 14. The Customer may by written notice to the Company request the Company to agree a higher limit of liability provided insurance cover can be obtained therefor. The Company shall effect insurance up to such limit and the Customer shall pay upon demand the amount of any and all premiums. The Customer shall disclose such information as the insurer shall require. In no case shall the Customer be entitled to recover from the Company more than the amount received from the insurer.

Indemnity16. The Customer shall indemnify the Company against any and all liabilities, claims and costs (including reasonable legal

fees) incurred by the Company as a direct or indirect result of the wilful or negligent act or omission or misrepresentation of the Customer in connection with the goods or breach by the Customer of its obligations hereunder.

Payment and Risk17.1 All payments shall be made net cash within 30 days of the date of the invoice, subject to suitable credit references, unless

otherwise agreed in writing by the Company. Time for payment shall be of the essence.17.2 If the Customer fails to pay any sum on the due date then without prejudice to any other right or remedy available to

the Company, the Company may cancel the contract; suspend further deliveries; appropriate any payment made by the Customers to such of the products as the Company think fit (notwithstanding any appropriation by the Customer); and charge interest (before and after Judgement) on the amount unpaid at the rate of 4% above Barclays Bank plc’s base rate from time to time calculated on a daily basis until payment in full

17.3 The Customer shall have no right to set-off, statutory or otherwise.17.4 The Company reserves the right at any time to demand security for payment before delivering any order.17.5 The goods shall be at the Customer’s risk as from delivery to the Customer or the carrier.

Retention of Title18.1 In spite of delivery having been made property in the goods shall not pass from the Company until:18.1.1 the Customer shall have paid the price plus Value Added Tax in full and 18.1.2 no other sums whatever shall be due from the Customer to the Company.18.2 Until property in the goods passes to the Customer in accordance with Clause 18.1 the Customer shall hold the goods

and each of them on a fiduciary basis as bailee for the Company. The Customer shall store the goods (at no cost to the Company) separately from all other goods in its possession and marked in such a way that they are clearly identified as the Company’s property.

18.3 Notwithstanding that the goods (or any of them) remain the property of the Company the Customer may sell or use the goods in the ordinary course of the Customer’s business at full market value for the account of the Company. Any such sale or dealing shall be a sale or use of the Company’s property by the Customer on the Customer’s own behalf and the Customer shall deal as principal when making such sales or dealings. Until property in the goods passes from the Com-pany the entire proceeds of sale or otherwise of the goods shall be held in trust for the Company and shall not be mixed with other money or paid into any overdrawn bank account and shall be at all material times identified as the Company’s money

18.4 The Company shall be entitled to recover the price (plus Value Added Tax) notwithstanding that property in any of the goods has not passed from the Company.

18.5 Until such time as property in the goods passes from the Company the Customer shall upon request deliver up such of the goods as have not ceased to be in existence or resold to the Company. If the Customer fails to do so the Company may enter upon any premises owned occupied or controlled by the Customer where the goods are situated and repossess the goods. On the making of such a request the rights of the Customer under Clause 11 18.3 shall cease.

18.6 The Customer shall not pledge or in any way charge by way of security for any indebtedness any of the goods which are the property of the Company. Without prejudice to the other rights of the Company, if the Customer does so all sums whatever owing by the Customer to the Company shall forthwith become due and payable.

18.7 The Customer shall insure and keep insured the goods to the full price against “all risks” to the reasonable satisfaction of the Company until the date that property in the goods passes from the Company, and shall whenever requested by the Company produce a copy of the policy of insurance. Without prejudice to the other rights of the Company, if the Customer fails to do so all sums whatever owing by the Customer to the Company shall forthwith become due and payable.

18.8 The Customer shall promptly deliver the prescribed particulars of this contract to the Registrar in accordance with the Companies Act 1985 Part XII as amended without prejudice to the other rights of the Company, if the Customer fails to do so all sums whatever owing by the Customer to the Company shall forthwith become due and payable.

Guarantee19. In the event of goods or parts thereof supplied by the Company not complying with the express terms of the contract or

proving defective in materials or manufacture or design within 6 months after delivery the Company will, at its option, repair or replace the goods or the defective part or parts thereof free of charge to the Customer or will refund all payments made by the Customer.

20. Where goods are returned to the Company pursuant to any claim under the aforegoing Clause but it is found that no liability exists thereunder the Customer shall pay to the Company the reasonable costs of investigating the claim.

Recommended Use21. The Customer shall ensure that the goods supplied under this contract shall only be used in accordance with the warning

fitted to the goods and with instruction manuals supplied by the Company in relation thereto.22. The Customer shall ensure that any goods supplied by the Customer for ultimate use by non-English speaking consumers

shall only be supplied with both the warning fitted to the goods and with the instruction manuals translated into the language which will be understood by any such user

Patents and Trade Marks23. The Company shall subject to Clause 24 and 25 hereof indemnify the Customer against any claim made against the

Customer by reason that the goods sold by the Company to the Customer infringes any United Kingdom patent or registered design subsisting at the date of such sale by the Company provided that written notice is given by the Customer to the Company immediately any such claim is made and no admission is made by the Customer in respect of any alleged infringement

24. In relation to such claims as is referred to in Clause 23 hereof the Customer shall permit the Company to undertake sole conduct of any defence thereto and any negotiations for a settlement thereof

25. Clause 23 shall have no application any claim in respect of an infringement or alleged infringement which has arisen by reason of compliance by the Company with any design or instruction furnished by the Customer and where any claim which arises as aforesaid is pursued against the Company the Customer shall indemnify the Company against such claim and any cost or expenses incurred by reason thereof.

26. The Customer will not alter remove or in any way tamper with any of the trade marks or trade names on any of the products supplied

Insolvency of the Customer27. If the Customer makes any voluntary arrangement with its creditors or becomes subject to an administration order or being

an individual becomes bankrupt or (being a company) goes into liquidation (otherwise than for the purpose of amalgama-tion or reconstruction); or if an encumbrancer takes possession or a receiver is appointed of any property or assets of the Customer; or the Customer ceases or threatens to cease to carry on business; or the Company reasonably apprehends that any of the events mentioned above are about to occur then (without prejudice to any other right or remedy available to the Company) the Company may cancel the contract or suspend further deliveries under the contraction without any liability to the Customer and if the products have been delivered but not paid for the price shall become immediately due and payable notwithstanding any previous agreement to the contrary

Export Houses28. All invoices for goods supplied to export houses will be subject to the standard rate of Value Added Tax.

General and Governing Law29.1 Any notice shall be in writing to the address of the relevant party on the Acceptance of Order form or such other addresses

as notified for the purpose.29.2 No waiver by the Company of any breach of the contract by the Customer shall be considered as a waiver of any subse-

quent breach of the same or any other provision.29.3 If any provision of the Terms is held by any competent authority to be invalid or unenforcable in whole or in part the validity

of the other provisions of the Terms and the remainder of the provision in question shall not be affected thereby.29.4 All contracts for the sale of goods entered into by the Company shall be subject to English law and to the exclusive

jurisdiction of the English Courts to which jurisdiction the parties agree to submit.

Date post:	25-Mar-2018
Category:	Documents
Upload:	trinhphuc
View:	216 times
Download:	1 times

ASBESTOS REMOVAL PRODUCTS - smhequipments.comsmhequipments.com/documents/scott_asb_eng_2006.pdf ·...

Documents