+ All Categories
Home > Documents > ATLAS CONCORDE MARK · Mark blends, into a unique design project, various contemporary materials...

ATLAS CONCORDE MARK · Mark blends, into a unique design project, various contemporary materials...

Date post: 12-Jun-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
1
ATLAS CONCORDE MARK GLAZED CERAMIC WALL TILE, THRU BODY PORCELAIN FLOOR TILE Colours Floor: Lastra 2cm - 24x24 Natural Wall: 12x22 Recfied Nominal sizes: Floor Special instrucons Gypsum Lastra Gypsum White Ivory Taupe Silver Chrome Pearl Lastra Pearl Tobacco Clay Lastra Chrome Graphite Hexagon Mosaic www.TierraSol.ca Technical specificaons CGSB Type 7 PEI n/a Frost Resistance Yes Chemical Resistance Class UA Tile thickness 10 mm Lastra: 2cm MOHS n/a Water Absorpon 0.10% Moderate Variaon V1 V2 V3 V4 Recommended applicaons Residenal Light commercial Bath / Shower Indoor Wall Dynamic Coefficient of Fricon > 0.42 Characteriscs of le Stain resistant Hypoallergenic Odour resistant Resistant to fungus Low maintenance Fade resistant Fireplace Fricon Coefficient Dry: 0.4 Wet: 0.4 Medium commercial Floor Shade variaons between les is characterisc. Colour may vary from sample. For rectangular les, for both floor and wall, are not recommended to be installed using a 50/50 brick paern. The only brick paerns acceptable are 40/60 or 30/70. 12x24 Natural; 12x24 Polished 24x24 Natural; 24x24 Polished 50/50 Mark blends, into a unique design project, various contemporary materials that combine elegance and expressive flair: cement, resin, stone, marble, oxidized metals and wood. The different surface finishes and available sizes enhance the project potenal to create original venues with a strong metropolitan character. Heavy commercial
Transcript
Page 1: ATLAS CONCORDE MARK · Mark blends, into a unique design project, various contemporary materials that combine elegance and expressive flair: cement, resin, stone, marble, oxidized

ATLAS CONCORDE MARKGLAZED CERAMIC WALL TILE, THRU BODY PORCELAIN FLOOR TILE

Colours

Floor: Lastra 2cm - 24x24 Natural

Wall: 12x22 Rectified

Nominal sizes: Floor

Special instructions

Gypsum

Lastra Gypsum

White Ivory Taupe Silver

Chrome

Pearl

Lastra Pearl

Tobacco

Clay

Lastra Chrome

Graphite

Hexagon Mosaic

www.TierraSol.ca

Technical specifications

CGSB Type 7

PEI n/a

Frost Resistance Yes

ChemicalResistance

Class UA

Tile thickness 10 mmLastra: 2cm

MOHS n/a

Water Absorption 0.10%

Moderate

Variation V1 V2 V3 V4

Recommended applications

Residential

Light commercial

Bath / Shower

Indoor

Wall

Dynamic Coefficient of Friction

> 0.42

Characteristics of tile

Stain resistant Hypoallergenic Odour resistant

Resistant to fungusLow maintenance Fade resistant

Fireplace

Friction CoefficientDry: 0.4Wet: 0.4

Medium commercial

Floor

Shade variations between tiles is characteristic. Colour may vary from sample. For rectangular tiles, for both floor and wall, are not recommended to be installed using a 50/50 brick pattern. The only brick patterns acceptable are 40/60 or 30/70.

12x24 Natural;12x24 Polished

24x24 Natural;24x24 Polished 50/50

Mark blends, into a unique design project, various contemporary materials that combine elegance and expressive flair: cement, resin, stone, marble, oxidized metals and wood. The different surface finishes and available sizes enhance the project potential to create original venues with a strong metropolitan character.

Heavy commercial

Recommended