www.fanatec.com Fanatec ® is a registered trademark of Endor AG Designed and developed by Endor AG in Germany Manufactured by The F1 logo, FORMULA 1, F1, GRAND PRIX and related marks are trademarks of Formula One Licensing BV, a Formula 1 company. All rights reserved. ● Compress and hold the Quick Release mechanism. ● Remove the lower back cover. ● Loosen the two bolts highlighted in red with a 2 mm Allen key (not included). ● Disconnect the existing shifter paddle cables. ● Loosen the mounting bolts highlighted in red using a 4 mm Allen key (not included) to detach the standard paddle modules. ● Attach Podium Advanced Paddle Module (P APM; optional) and tighten the mounting bolts using a 4 mm Allen key (not included) NOTE: Only use the M5x16 mm mounting bolts included in the package contents of the Podium Advanced Paddle Module. ● Connect the P APM cables to the correct sockets. ● Attach the back cover again, insert and tighten the two bolts as in the first step above. ● Pull off the steering wheel from the wheel base axle. ● Press or “pinch” and hold the Quick Release mechanism. ● Insert storage pin for long-term storage. ● Release the Quick Release mechanism. DETACHING THE STEERING WHEEL UPGRADE SHIFTER PADDLES PACKAGE CONTENTS ATTACHING THE STEERING WHEEL ● Remove storage pin. ClubSport Steering Wheel F1 ® 2020 equipped with the ClubSport Magnetic Paddle Module with forged carbon finish. Button Caps and Sticker Set. Safety bolt. ● Align the wheel base axle to the correct position. ● Press together or “pinch” and hold the Quick Release mechanism. ● Slide the steering wheel onto the wheel base axle up to the mechanical limit. ● Release the Quick Release mechanism. Ensure that you install the latest firmware for both the wheel base and the steering wheel. You can obtain it from our official website (www.fanatec.com), refer to the download section. Watch our driver and firmware update video for visual assistance on the official Fanatec YouTube TM channel and download our Driver & Firmware Instruction Manual from this product’s page on our website (www.fanatec.com). 2020 Quick Guide EN Page 3 Page 2 Page 1 VIDEO: Watch our Podium Advanced Paddle Module Tutorial video for further visual reference on the official Fanatec YouTube TM channel. 1 A C B 3 4 5 2 4 2 1 4 5 1 2 5 3 3 6 7
Transcript
www.fanatec.com
Fanatec® is a registered trademark of Endor AG Designed and developed by Endor AG in Germany
Manufactured by
The F1 logo, FORMULA 1, F1, GRAND PRIX and related marks are trademarks of Formula One Licensing BV, a Formula 1 company. All rights reserved.
Watchourdriverandfirmwareupdatevideo forvisualassistanceontheofficialFanatecYouTubeTMchannelanddownloadourDriver& Firmware Instruction Manual from this product’s page on ourwebsite(www.fanatec.com).
In order to enter the shifter calibration mode, simultaneously press theTuningbuttonandthebuttonhighlightedbelow.
Ifacentrecalibration isneeded(e.g.afterafirmwareupdateof thewheelbase), youneed topress theTuningbuttonashighlightedon thepicturebelow to enter TuningMenu.When the TuningMenu is active, press theanaloguestickandtheFunkySwitchTMsimultaneouslytocalibratethewheelcentre.
TuningMenuButton
TuningMenuButton
*GSB=GameSpecificButtonTUNING OPTIONS
ANALOGUE PADDLE MODES
CLUTCH BITE POINT MODESMODES
In order to enter the TuningMenu, press the Tuning button. To navigateinsidethemenu,usetheFunkySwitch™highlightedinredbelow.Pressitupordowntoaccessfivesetupprofiles.PresstheFunkySwitchTMrightorlefttogothroughtheoptions.RotateorpresstheFunkySwitchTMupordowntochangeoptionvalues.
IncaseyouareusingthePodiumAdvancedPaddleModule(PAPM;optional)you have four extra digital buttons plus two analogue axes added to thefunctionalityofthesteeringwheel.FortheanalogueaxesyoucanselectinwhichmodetheseoperatebyturningthepaddlemodeswitchbetweenpositionA-D,refertoNo.26 inchapter“buttonmapping”:
A Clutch bite point Bothleftandrightanaloguepaddlesworkinparallelasclutchcontrol paddles,theonepressedfurtherbecomestheprimarypaddle.
B Clutch + Handbrake Leftpaddleisclutch,rightpaddleishandbrake.
C Brake + Throttle Leftpaddleisbrake,rightpaddleisthrottle.
D Mappable analogue axes Paddlescanbemappedastwoadditionalaxesbutbeawaretheseare sharedwiththejoystick.
