+ All Categories

Audio Spot Light

Date post: 16-Jan-2017
Category:
Upload: abhijeet1209
View: 1,160 times
Download: 0 times
Share this document with a friend
23
18-02-2015 RRIMT/EC/3rd Yr/6th Sem/Seminar 1 AUDIO SPOT LIGHT Abhijeet Aditya 1236131801 E.C. 3 rd Year
Transcript
Page 1: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 1

18-02-2015

AUDIO SPOT LIGHT

Abhijeet Aditya1236131801E.C. 3rd Year

Page 2: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 2

INTRODUCTION THEORY COMPONENTS & SPECIFICATIONS TECHNOLOGY OVERVIEW FEATURES & APPLICATIONS ADVANTAGES & DISADVANTAGES CONCLUSION

18-02-2015

CONTENTS

Page 3: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 318-02-2015

INTRODUCTIONWHAT IS AUDIO SPOTLIGHTING?

It creates focused beams of sound similar to light beams coming out of a flashlight.

It uses ultrasonic energy to create extremely narrow beams of sound that behave like beams of light

Page 4: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar18-02-2015 4

Page 5: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 5

Into the depth of audio spot lighting

Loudspeakers are direct radiating—that they

fundamentally a piston like device designed to directly pump air molecules into motion to create audible sound we hear

The beam angle of audible sound is very wide, just about 360 degrees

In order to focus sound into a narrow beam, you need to maintain a low beam angle that is dictated by wavelength18-02-2015

THEORY

Page 6: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 6

The original low frequency sound waves such as human speech or music are applied into an audio spotlight emitter deviceThis low frequency signal is frequency modulated with ultrasonic frequenciesSince ultrasonic frequency is used the wavelength of the combined signal will be in the order of few millimetersSince the wavelength is smaller the beam angle will be around 3 degree, as a result the sound beam will be narrow one with a small dispersion

18-02-2015

Page 7: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 718-02-2015

Page 8: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 8

CONVENTIONAL AND AUDIO SPOT LIGHT PHENOMENON

18-02-2015

Page 9: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 9

Components of audio spot

light

18-02-2015

Page 10: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 10

Audio Spotlight consists of following major

components:

Sound beam processor/amplifier Frequency oscillator Modulator Microcontroller Power supply Audio Spotlight transducer18-02-2015

COMPONENT & SPECIFICATION

Page 11: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 11

18-02-2015

SOUND BEAM PROCESSOR

Worldwide power input standard

Standard chassis 171mm(w) x57mm(h) x 280mm(d) option mount rack kit

Audio input: balanced custom configurations available

Page 12: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 12

18-02-2015

AUDIO SPOTLIGHT TRANSDUCER 445 mm diameter, 12.7 mm

thick, 1.82kg Wall, overhead or flush

mounting Audio input :100dB max Usable range :20m Audibility to 200m Compatible with loudspeaker

mounting accessories due to continue development

Page 13: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 13

The Audio Spotlight & Hyper Sonic Sound

uses ultrasonic energy to create extremely narrow beam of sound that behave like beam of light

These ultrasonic sound have very small wavelength

18-02-2015

TECHNOLOGY OVERVIEW

Page 14: Audio Spot Light

14

DIRECT AUDIO & PROJECTED AUDIO

18-02-2015 RRIMT/EC/3rd Yr/6th Sem/Seminar

Page 15: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 15

Physically small speakers

No need for woofers, voice coils

Power efficient Directionality

Resultant audio retains directionality of ultrasonic sound source

18-02-2015

Features

Page 16: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 16

18-02-2015

APPLICATION 1Audio Spotlight

speakers allow visitor to enjoy music while other read nearby peace & quiet

Page 17: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 17

18-02-2015

APPLICATION 2Using this

technology two person can hear different sound while standing close to each other

Page 18: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 18

18-02-2015

APPLICATION 3

The US Navy using this technology on deck as a substitute to the radio operator's headphones

Page 19: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 19

Can focus sound only at place you want

Ultrasonic emitter devices are thin and flat

The focused or directed sound travels much faster in a straight line than conventional loudspeakers

Dispersion can be controlled-a very narrow or wider to cover more listening area

There is no lag in reproducing the sound

18-02-2015

ADVANTAGES

Page 20: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 20

Line of sight should be clear Directivity directly depends on the length of

the ultrasonic column

Long distance transmission is not possible

18-02-2015

DISADVANTAGES

Page 21: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 21

Audio spotlighting is really going to make a revolution in

sound transmission and the user can decide the path in which audio signal should propagate

Due to the unidirectional propagation it finds application in large number of fields.

Audio spotlighting system is going to shape the future of sound and will serve our ears with magical experience

So we can conclude- Audio Spotlighting really “put sound where you want it” and will be “A REAL BOON TO THE FUTURE.”

  18-02-2015

CONCLUSION

Page 22: Audio Spot Light

22

18-02-2015 RRIMT/EC/3rd Yr/6th Sem/Seminar

THANK YOU!For Your Attention

Page 23: Audio Spot Light

RRIMT/EC/3rd Yr/6th Sem/Seminar 23

Queries???

18-02-2015


Recommended