Machine Features
• The Magnabend 211 R is a servo controlled double bender with the capacity to bend two (2 ) #11- 40mm bars at a time.
• The 211 R has intermediate support arms that automatically swing out of the way to allow the traveling bender to pass by.
• The 211 R has a 990 mm center distance.
• The machine grips and guides the bar keeping the operators hands free of pinch points and eliminates 2-3 man bending.
• Light curtain prevents operators from entering the area while the moving bender travels.
• Automated homing at start up. • Air assisted, lighter tooling to reduce
operator strain. Tooling achives CRSI minimum hook.
• Two lift-off arms on the moving bender.
MAGNABEND 211 R
© 2019 KRB MACHINERY CO. | 1058 COOL CREEK ROAD | WRIGHTSVILLE, PA 17368 | 717-252-3667 | WWW.KRBMACHINERY.COM
AUTOMATIC BENDERS
cAir actuated tables on both benders help assist in bending stirrups. A program-mable safety scanner prevents operators entering the stationary bending area. The scanner has two zones; a warning zone (yellow) gives an audible signal, and a shut off zone (orange) stops the bender. The 211 R has intermediate support arms that automatically swing out of the way to allow the traveling bender to pass by.
KRB
1058 Cool Creek Road
Wrightsville, PA 17368
Phone: 717-252-3667
Fax: 717-252-9247
© 2019 KRB MACHINERY CO. | KRB RESERVES THE RIGHT TO MAKE CHANGES OR MODIFICATIONS
General Specifications
• All electrical controls are U.L. (Underwriters Laboratories) and c.U.L. Listed.
• All wiring and electrical enclosures meet watertight, dust tight and oil tight standards.
Controls that are easy to operate, faster to set-up and reduces operator errors.
MAGNABEND 211 R CAPACITY CHART Grade 60 / 65kg/mm2
IMPERIAL # 3 4 5 6 7 8 9 10 11 14
METRIC mm 10 12 16 20 22 25 28 32 40 45
CAPACITY MANDREL 9 7 6 6 5 5 4 3 2 1
CAPACITY SPLIT 9 7 6 6 5 4 3 2 1 1
Control Features
• Touch screen minimizes keystrokes.
• Visual tooling icons and maximum bar capacity displayed based on bar size can be quickly selected to speed set-up.
• Common bend angles are easily selected speeding input.
• Adjustable Radius Control (A.R.C.).
• User friendly machine diagnostics.
• Utilization screen has the ability to export utilization data via USB device.
• Has angle check feature to verify individual bend angles prior to running full shape cycle.
• For long end bends, the controls allow the operator to bend a few degrees and pause the bending cycle while an operator helps to support the bar.
• Quickly recover from a Controlled Stop through a reset button.
• Wireless barcode available.
40-60 ft / 12-18 m 12 ft / 3.6 m
33 in / 84 cmconveyor height
990 mm center distance.
990 mm
MAGNABEND 211 R CAPACITY CHART Grade 80 / 85kg/mm2 (* to 45 degrees)
IMPERIAL # 3 4 5 6 7 8 9 10 11 14
METRIC mm 10 12 16 20 22 25 28 32 40 45
CAPACITY MANDREL 9 7 6 6 5 5 4 3 2 1
CAPACITY SPLIT 9 7 6 6 4 3 3* 2* 1*
Power Requirement 24 kW - 480v
Air Pressure 80 PSI, 10 CFM