AUTOMOTIVECATALOGspray booths | preparation areas

paint mixing rooms | IR/UV dryers

bodyshop equipment

We design and manufacture tailor made surface treatment equipment for the automotive sector since 1980.

Lagos in the WorldWe have an extended commercial network that reaches more than 20 Countries around the world. Check the full list at www.cabinaslagos.com/en

Why Lagos?

ABOUT US

TechnologyWe develop our own solutions based on the knowledge acquired from each sector of activity

Lean philosophyOur goal is to make you save energy and time during all the lifespan of our products

ModularityHigh configuration flexibility even in tight spaces. We conceive tailor made solutions based on your needs.

Low carbon footprintLow environmental impact on the life cycle of our pro-ducts. (ISO 14044).

Premium After-sales serviceSmartbooth®: Connectivity for remote diagnostics and intervention. Experienced after-sales team.

Best cycle timeDynamic lean process design to achieve the optimal process flow .

+35 years ofexperience

+20 Countries

7 sectors AERONAUTICAL | RAILWAY | RENEWABLE ENERGIES | AUTOMOTIVE | WOOD REFINISHING | GENERAL INDUSTRY

13.000 successfulinstallations

Lean and optimal layout for your workshop. We make every inch count.

Standard solutions available

Tailor made solutions to fit every environment.

Spray booths for special vehicles

Optional on-rail IR equipment

On-roof generators to save space

On-Rail movement between Prep Areas and Spray booths

High quality components

+10.000 sqm european manufacturing plant

AUTOMOTIVE SECTOR

DOUBLE GLAZING

Scan this code

to check our

automotive website

we design TAILOR MADE solutions for your workshop

PREDICTIVE MAINTENANCE SERVICE:Thanks to our SmartBooth® system (optional), we can monitor the correct operation of the equipment and see potential pro-blems before they occur. The historical data allows us to deeply check the correct functioning of the booth.

NOISE LEVELSOur cabins have lowest noise levels of market (only 73 dB).

ENERGY SAVINGThe optimal insulation of the booth, along with direct burner and heat recovery configurations, can gene-rate savings up to 25% compared with other equip-ments on the market.

Up to25%

Optional: paint mixing roomComplete your spray booth with a lateral enclosure or paint mixing room to organize and store all your refinishing equipment and material.

We offer lots of configurations with our all products to match your particular needs.

1. High flexibility of configurations

2. Great variety of complements

3. First quality components (Siemens, Saint Gobain, Philips, ABB...)

4. Personalized design When compared to similar spray booths

Thick double-glazed doors with air chamber for better insulation

ROBUST & STABLE DOORSManufactured with durability in mind to avoid structural fatigue on demanding environments.

EXTRACTABLE LIGHTINGLeds or neon tubes are easily extracted fand replaced rom inside the booth.

USER FRIENDLY INTERFACEAnalog or digital user friendly control panel to manage all the functions of the booth.

It can be mounted on a separate rack.

LED LIGHTING SETUPOptional lateral and angular lighting configurations to avoid possible shadows and color mismatch.

DOUBLE BLOWERThe double blower generator reduces turbulences inside the spray booth, avoiding dust scattering around the environment

QUALITY FILTERSEcological, durable and easy to replace.

ADJUSTABLE DIFFUSERSAdjustable diffusers in the floor for a homogeneous airflow inside the booth.

Optional: heat recovery systemMaximize energy savings by recovering part of the ex-haust heated air. On particularly cold areas, this system could save up to 40% of energy.

Optional: direct flame burnerHigher energy efficiency compared to traditional burners.

NO CIVIL WORK NEEDED *depending on the choosen configuration

IR AND UV DRYERS

We offer a wide range of dryers for the automotive and industrial sector. Ask for our catalog or check them at www.cabinaslagos.com/en

PAINT MIXING ROOMS

Ideal for storing supplies and other equipment.

paintTROTTER PORTABLE BOOTH

paintTROTTER Refinish is a mobile spray booth designed to perform painting and sanding jobs on small surfaces with flawless quality and reduced cycle time while saving up to 80% of energy consumption compared to a traditional spray booth.

PREPARATION AREAS

Designed to prepare the vehicle before the paint booth. Our preparation areas are highly configurable and durable. Perfect for sanding and masking the vehicle.

They can be delivered with on-rail translation systems that moves the vehicle from the prep area to the spray booyh and vice versa. This lean system saves valuable time and im-proves drastically the worflow of your workshop.

CLEAN AIR PURIFIER

The Clean Air filters the pollu-ted air of the workshop and returns it to its natural state.

Improve the health conditions in your business at a very low cost and without complica-tions.

Aero Infinity seriesCompact EVO seriesMaster EVO series

ASK FOR OUR CATALOG OR VISIT www.cabinaslagos.com

More info:

• DIMENSIONS: 4,08 X 6,44

• MOTOR: 5,5 or 7,5 HP

• Nº OF GROUPS: 1 (Impulsion only)

• IMPULSION GROUP POSITION: side, back, roof.

• FLOOR GRID: Complete, partial, plinth

• Lighting and filter replacement from inside the booth

• Unlaminated glass

• Double glazing: NO

STANDARD OPTIONS

OPTIONS

* Some configurations may vary without previous notice. Please check with us the current setups at info@cabinaslagos.com

series

PRODUCTION

Pure effectiveness and power at an affordable price

series

SIMMETRYThe most balanced option

for those looking for an excellent performance

series

SUPRA 4The real paint booth queen.

Only If you need the best performance and design

• DIMENSIONS: 4,08 X 7,34

• MOTOR: 7,5 or 10 HP

• Nº OF GROUPS: 1 (impulsion only) or 2 (impusion/extraction)

• IMPULSION GROUP POSITION: side, back, roof.

• CONTROL PANEL: Optional PLC

• FLOOR GRID: Complete, partial, plinth

• Lighting and filter replacement from inside the booth

• Laminated glass

• Double glazing: YES

• DIMENSIONS: 4,08 X 7,34

• MOTOR: 10 or 15 HP

• Nº OF GROUPS: 2 (impusion/extraction)

• IMPULSION GROUP POSITION: side, back, roof.

• CONTROL PANEL: Analogic or Digital PLC

• FLOOR GRID: Complete, partial, plinth

• Lighting and filter replacement from inside the booth

• Laminated glass

• Double glazing: YES

• Custom paint booth vinyl design

PNEUMATIC ELEVATOR ELECTRIC HEATERS SIDE PAINTER DOORLift up to 3 tons, Electric / Pneu-matic. It fits the booth without taking up space.

We offer different configurations to heat the spray booth only with your electric power source.

Lateral or front painter door for quick access to the booth.

STANDARD DIMENSIONS LENGHT WIDE HEIGHT4,08m

4.08m

4.08m

3,47m

3.47m

3.47m

Custom dimensions are available

6.44m

7.34m

8.24m

P.I. Bergondo, B24ES-15165 A Coruña, SpainT.: +34 981 784 909 F.: +34 981 795 248 M.: info@cabinaslagos.com

www.cabinaslagos.com

OTHER PRODUCTS AND CATALOGS

catalogs.cabinaslagos.com

twitter.cabinaslagos.com fb.cabinaslagos.com linkedin.cabinaslagos.com youtube.cabinaslagos.com

LED LightingLow power consumption and high durability and resistance.

Infrared dryersShort wave infrared with electronic regulation, temperature and distance sensors.

RampsFixed or pneumatic models available.

On-rail vehicle movement equipmentManual or motorized skids to transport the vehicle between workstations.

Pneumatic liftComfort and convenience while working on lower areas of the vehicle.

Air distributor systemHomogeneous distribution of the air flow in the upper plenum.

Touch screenEase and practicality in managing all Spray Booth control systems.

Enhance your Spray Booth with:

Enhance your Preparation Area with:

Direct flame burnerImprove your burner’s energy efficiency.