Distributed By:
TRADE-LOGIX
PO BOX 1450 WATERDOWN, ON LOR 2HO www.trade-logix.com Email: [email protected] Tel: (905) 581-2292
AUTOMOTIVE TOOLS & EQUIPMENT
1 WWW.TRADE-LOGIX.COM
TAB
LE O
F C
ON
TEN
TS CREEPERS & SEATS Page 2
ENGINE STANDS & CRANES Page 4
LOAD LEVELER / ENGINE SUPPORTS Page 7
JACKS AND LIFTS Page 8
SHOP PRESSES Page 12
PARTS WASHERS Page 14
SANDBLAST CABINETS Page 15
SERVICE / TABLE CARTS Page 16
PORTA POWER / RAMS Page 19
TIRE CHANGERS Page 20
JOB SITE BOXES Page 21
AUTOMOTIVE ACCESSORIES Page 22
PIPE BENDERS Page 18
WARRANTY Page 25
2 WWW.TRADE-LOGIX.COM
CR
EEP
ERS
36” CREEPER Part No: TL06101 Six 2-1/2" swivel caster wheels for easy mobility Heavy duty ¾″ steel tube frame with 4 cross bars Powder coat paint finish
40” CREEPER Part No: TL06202 Six 2-1/2" swivel caster wheels for easy mobility Heavy duty ¾″ steel tube frame with 4 cross bars Powder coat paint finish
40” CREEPER WITH ADJUSTABLE HEAD
Part No: TL06203 Six 2-1/2" swivel caster wheels for easy mobility Heavy duty ¾″ steel tube frame with 4 cross bars Padded back with 3 position adjustable headrest Powder coat paint finish
40” CREEPER WITH ADJUSTABLE HEAD & TOOL TRAY
Part No: TL06206 Six 2-1/2" swivel caster wheels for easy maneuverability Heavy duty ¾″ steel tube frame with 4 cross bars Padded back with 3 position adjustable headrest Twin storage trays for easy tool access Powder coat paint finish
3 WWW.TRADE-LOGIX.COM
FOLDING CREEPER / SEAT Part No: TL06301 Seven 2 ½” swivel caster wheels for easy mobility Padded back and adjustable headrest Steel framework with tough powder coat finish Dual application - flat creeper or mechanics seat Takes seconds to convert (no tools required)
KNOCK DOWN ROLLER SEAT Part No: TL07201 Four 2½” swivel casters provide smooth mobility Durable tool storage tray for easy access Tubular steel frame for maximum strength
PNEUMATIC SEAT Part No: TL07401 Foam padded seat for maximum comfort Five swivel caster wheels for easy maneuverability Storage tool tray under seat for quick and easy access Adjustable from 15" to 19 ¼” Seat swivels 360°
PLASTIC KNEELER Part No: TL07701 Multiple uses (automotive, gardening, building) Product size: 3 ½”x 10"x 25 ¾” Material breakdown by %: Plastic 96%, steel 2%, foam 2% Load rated capacity: 240lbs. High impact plastic Handle for carrying Foam for added cushion while kneeling 2" oil resistant rollers
SEA
TS A
ND
KN
EELE
R
4 WWW.TRADE-LOGIX.COM
1250LB U-FRAME ENGINE STAND Part No: TL04301 Capacity: 1250LBS Center height: 35 ½” Fully adjustable mounting head secures to rear of engine One bolt easily disassembles stand for transport or storage
ENG
INE
STA
ND
S
1000LB ENGINE STAND Part No: TL04201 Capacity: 1000LBS Center height: 30 ¾” Fully adjustable mounting head secures to rear of engine 360° rotating head allow easy rotation of engine
750LB ENGINE STAND Part No: TL04101 Capacity: 750LBS Center height: 30-3/4” Sturdy all Steel Construction
1500 LB U-FRAME ENGINE STAND Part No: TL04401 Capacity: 1500LBS Center height: 32 1/3” Fully adjustable mounting head secures to rear of engine 360° rotating head allow easy rotation of engine
5 WWW.TRADE-LOGIX.COM
FOLD
ING
EN
GIN
E ST
AN
DS
1500LB FOLDING ENGINE STAND Part No: TL04402 Capacity: 1500lb capacity Centre Height: 31” Foldable for easy storage 360° Rotating Head
2000LB FOLDING ENGINE STAND Part No: TL04502 Capacity: 2000lb capacity Centre Height: 32” Fully adjustable mounting head secures to rear of engine Foldable for easy storage
MODEL CAPACITY (lbs) CENTRE HEIGHT (MM) NET WEIGHT (kgs)
TL04101 750 780 21
TL04201 1000 780 22
TL04301 1250 905 29
TL04401 1500 820 39
TL04402 1500 790 35
TL04502 2000 815 45
6 WWW.TRADE-LOGIX.COM
Part No: TL01101 Part No: TL01201
Part No: TL01401 Part No: TL01203
MODEL CAPACITY (Ton)
BOOM WORKING
RANGE (MM)
LIFTING RANGE
(MM)
NET WEIGHT
(kgs)
TL01101 1 960-1240 0-2150 67
TL01202 2 1265-1945 0-2520 85
TL01203 2 1050-1590 0-2360 113
TL01201 2 1050-1590 0-2360 88
TL01301 3 1200-1830 0-2200 139
TL01401 2 1050-1590 0-2360 88
ENG
INE
CR
AN
ES
7 WWW.TRADE-LOGIX.COM
Model No: TL03101 Model No: TL03201 Model No: TL03301
MODEL CAPACITY (KGS)
ADJUSTING RANGE
(MM)
NET WEIGHT
(kgs)
TL03101 500 430 5.4
TL03201 750 415 4.7
TL03301 750 315 5.8
300 KG ENGINE SUPPORT Part No: TL15101 Capacity: 300 KG
500 KG ENGINE SUPPORT Part No: TL15201 Capacity: 500 KG
LOA
D L
EVEL
ER /
EN
GIN
E SU
PP
OR
TS
8 WWW.TRADE-LOGIX.COM
TRA
NSM
ISSI
ON
JA
CK
S
0.5 TON SHOP PRESS Model No: TL08101
0.5 TON SHOP PRESS Model No: TL08103
0.5 TON SHOP PRESS Model No: TL08201
0.6 TON SHOP PRESS Model No: TL08104
0.5 TON SHOP PRESS Model No: TL08102
TWO-STAGE
MODELCAPACITY
(TON)
MIN. HEIGHT
(INCHES)
MAX. HEIGHT
(INCHES)
TL08101 0.5 50-3/4" 70-1/3"
TL08103 0.5 44-1/3" 77-3/4"
TL08201 0.5 33-1/2" 73"
TL08104 0.6 7-1/2" 24-1/2"
TL08102 0.5 8" 22"
LOW-PROFILE
9 WWW.TRADE-LOGIX.COM
LIFT
ING
CR
AN
ES
1000LB SWIVEL LIFTING CRANE Part No: TL02201 Great for handling loads too heavy for manual lifting on the construction site, workshop or loading dock. Capacity: 1000 lbs (0.5 Ton) 3 Ton long ram jack provides fast raising action Crane swivels 360º Working Range of Boom: 3’- 4 ¼’ Lifting Range: up to 6 ½’
MODEL CAPACITY (Ton)
BOOM WORKING
RANGE (MM)
LIFTING RANGE
(MM)
NET WEIGHT
(kgs)
TL02201 0.5 870-1290 0-2015 44.5
TL02301 1 870-1290 0-2015 49
WINCH SWIVEL LIFTING CRANE Part No: TL02202 Capacity: 1000 lbs (0.5 Ton) 3 Ton long ram jack for faster raising action Crane swivels 360º Working Range of Boom: 3’- 4 ¼’ Lifting Range: up to 6 ½’
10 WWW.TRADE-LOGIX.COM
JAC
KS
3.5T DOUBLE-PUMP JACK Model No: TL36301
3.5T QUICK-LIFT JACK Model No: TL36302
30T AIR SERVICE JACK Model No: TL11104
22T AIR SERVICE JACK Model No: TL11103
1500LB ATV LIFT Model No: TL17205
1500LB LOW-PROFILE ATV LIFT Model No: TL17207
11 WWW.TRADE-LOGIX.COM
MO
TOR
CYC
LE L
IFTS
MODEL CAPACITY (LBS)
MIN. HEIGHT
(INCHES)
MAX. HEIGHT
(INCHES)
PLATFORM DIMENSION
(INCHES)
TL18101 800 8-3/4" 33-1/2" 53" x 19-1/3"
TL18102 1000 9-1/2" 33" 71" x 23-2/3"
800LB MOTORCYCLE LIFT Model No: TL18101
1000LB MOTORCYCLE LIFT Model No: TL18102
800LB MOTORCYCLE LIFT Part No: TL18201 Capacity: 800 LBS Operated by one foot pedal to lift, and another foot pedal to release Safety Valve to prevent overload Front wheel Locking Vise preventing motorcycle from tilting over Four Wheels providing easy maneuverability
12 WWW.TRADE-LOGIX.COM
SHO
P P
RES
SES
MODEL
CAPACITY
(TON)
WORKING RANGE
(INCHES)
TL05101 6 0 - 9-2/3"
TL05201 12 0 - 27-1/2"
TL05301 20 0 - 36"
TL05401 30 0 - 30-1/3"
TL05305 20 0 - 36"
6 TON SHOP PRESS Model No: TL05101
12 TON SHOP PRESS Model No: TL05201
20 TON SHOP PRESS Model No: TL05301
30 TON SHOP PRESS Model No: TL05401
20 TON SHOP PRESS Model No: TL05305
DUAL ACTION WITH PNEUMATIC
13 WWW.TRADE-LOGIX.COM
SHO
P P
RES
SES
(PN
EUM
ATI
C)
MODEL
CAPACITY
(TON)
WORKING RANGE
(INCHES)
TL05601 10 6-1/3" - 13"
TL05602 10 0 - 39"
TL05303 20 0 - 37-1/2"
TL055501 50 0 - 28-3/4"
10 TON SHOP PRESS Model No: TL05601
10 TON SHOP PRESS Model No: TL05602
20 TON SHOP PRESS Model No: TL05303
50 TON SHOP PRESS Model No: TL05501
14 WWW.TRADE-LOGIX.COM
These parts washers are perfect for any size garage. Our Table-Top Parts
Washer is lightweight and portable so it can be moved from job to job. Our
Vertical model stands up-right in an ergonomically comfortable position to
handle those large jobs. Depending on your requirements, either unit is big
enough to handle a wide range of motorcycle and automotive parts.
TABLE-TOP WASHER
Model: TL34102
VERTICAL WASHER
Model: TL34101
MODEL NO. TL34101 (Vertical) TL34102 (Table-Top)
POWER 110V 110V
PUMP 45-50 GPM 4 GPM
CAPACITY 20 Gallon 3.5 Gallon
NOZZLE Flexible Stainless Flexible Stainless
NET WEIGHT 38 KGS 25 KGS
GROSS WEIGHT 40 KGS 28 KGS
STRUCTURE WARRANTY 90 Days 90 Days
PUMP WARRANTY 30 Days 30 Days
PA
RTS
WA
SHER
S
15 WWW.TRADE-LOGIX.COM
Blast rust, corrosion, and paint in an enclosed cabinet to keep dust off the floor and
out of the air. Choose from either the top-loading bench top or vertical sandblast
cabinet model. Either unit can be filled with a variety of abrasive materials for
cleaning, polishing and finishing. Durable rubber gloves allow access to the inside
of the cabinet for operating the blast gun and moving parts while viewing thru large
plexiglass viewing windows.
VERTICAL CABINET
Model: TL32101
TABLE-TOP CABINET
Model: TL32201
MODEL NO. TL32101 (Vertical) TL32201 (Table-Top)
POWER 110V 110V
AIR REQUIREMENT 100 PSI 80 PSI
LIGHT 12V DC 12V DC
WORKING AREA 33.5” x 22” x 18” 19.5” x 29” x 12”
VIEWING WINDOW 21 x 10” 28” x 19”
AIR INLET ¼” NPT ¼” NPT
NET WEIGHT 38 KGS 25 KGS
GROSS WEIGHT 40 KGS 28 KGS
WARRANTY 90 Days 90 Days
SAN
DB
LAST
CA
BIN
ETS
16 WWW.TRADE-LOGIX.COM
ENGINE & TRANSMISSION TEAR DOWN CART
Part No: TL21305
Capacity: 500lbs
Table-Top Size: 48” x 28”
Adjustable Working Height from 37” - 41”
1 Gallon Capacity Oil Tank
2 Fixed + 2 Swivel casters with brakes
ENGINE & TRANSMISSION TEAR DOWN CART
Part No: TL21307
Capacity: 300lbs
Table-Top Size: 42” x 25”
Adjustable Working Height from 35” - 39”
1 Gallon Capacity Oil Tank
2 Fixed + 2 Swivel casters with brakes
200LB WORK TABLE CART
Part No: TL21201
Capacity: 200lbs
Adjustable Working Height from 33” - 48”
4 Swivel casters
8 spaces to hold tools, large rack for larger tools
Black rubber mat protects tools
SERVICE CART
Part No: TL21302
Capacity: 300lbs
Table-Top Size: 32” x 15-1/2”
1 Drawer with Two Storage Trays
2 Fixed + 2 Swivel casters with brakes
SER
VIC
E /
TAB
LE C
AR
TS
17 WWW.TRADE-LOGIX.COM
500LB HYDRAULIC TABLE CART
Part No: TL20102
Capacity: 500lbs
Lift Height from 10-2/3” to 29-1/2”
2 Fixed + 2 Swivel wheels
300KG HYDRAULIC TABLE CART
Part No: TL20101
Capacity: 300kgs
Lift Height from 10-1/2” to 30”
2 Fixed + 2 Swivel wheels
500KG HYDRAULIC TABLE CART
Part No: TL20104
Capacity: 500kgs
Lift Height from 11-1/2” to 30-1/2”
2 Fixed + 2 Swivel wheels
SER
VIC
E /
TAB
LE C
AR
TS
18 WWW.TRADE-LOGIX.COM
PIP
E B
END
ERS
MODELCAPACITY
(TON)
NUMBER
OF DIESDIE SIZE (INCHES)
TL16102 12 6 1/2", 3/4", 1", 1-1/4", 1-1/2". 2"
TL16202 16 8 1/2", 3/4", 1", 1-1/4", 1-1/2". 2", 2-1/2", 3"
MODELCAPACITY
(TON)
NUMBER
OF DIESDIE SIZE (INCHES)
TL16101 12 6 1/2", 3/4", 1", 1-1/4", 1-1/2". 2"
TL16201 16 8 1/2", 3/4", 1", 1-1/4", 1-1/2". 2", 2-1/2", 3"
Model No: TL16101 Model No: TL16201
DUAL ACTION WITH PNEUMATIC
19 WWW.TRADE-LOGIX.COM
PO
RTA
PO
WER
/ R
AM
MODELCAPACITY
(TON)RAM STROKE
TL09101 4 4-3/4"
TL09201 10 5"
Model No: TL16101 Model No: TL16101
MODELCAPACITY
(TON)RAM STROKE
TL10101 3 19-3/4"
TL10201 8 19-1/3"
TL10301 10 32-1/4"
Model No: TL10101 Model No: TL10301 Model No: TL10201
MODELCAPACITY
(TON)MIN. HEIGHT MAX. HEIGHT ADJ. HEIGHT LIFTING HEIGHT
TL11201 12 10-1/4" 20" 3" 6-1/3"
TL11102 20 10-1/4" 20" 3" 6-1/3"
PNEUMATIC
20 WWW.TRADE-LOGIX.COM
TIR
E C
HA
NG
ERS
PORTABLE TIRE CHANGER Part No: TL26101 Base Size: 15-1/8” x 18-1/2” Wheel Rest Plate: 7-1/2”D x 3/16”
MULTI-TIRE CHANGER Part No: TL2610 For Tires from 4” to 16-1/2” Diameter
21 WWW.TRADE-LOGIX.COM
These durable and secure steel job site boxes will ensure that your tools are kept safe whether on the job site, in your truck, or just to store valuable tools in the plant
ADDITIONAL FEATURES:
MIG Welded Seams for Extra Durability
Tamper Proof Locking Systems Keeps Tools Safe
Recessed Industrial Strength Side Handles
Heavy Duty Locking Hinge Provides Extra Lid Strength
Large and Medium Boxes are Predrilled for Casters
Durable Powder-Coat Pain Finish for Rust-Resistance and Scratches
MODEL SIZE GAUGE OVERALL DIMENSIONS (L X H X W)
TL19102 30" 16 30" x 17" x 12"
TL19103 36" 20 36" x 17-1/3" x 22"
TL19104 48" 20 48" x 24.5" x 28"
TL19308 3-IN-1 PACKAGE SET
JOB
SIT
E B
OX
ES
22 WWW.TRADE-LOGIX.COM
TRU
CK
STE
PS
MODEL SIZE CAPACITY (LBS) PLATFORM SIZE
TL27105 16" 500 16-1/2" x 7-1/2"
TL27101 20" 500 20-1/2" x 7-1/2"
TL27106 30" 500 30-1/2" x 7-1/2"
MODEL CAPACITY (LBS) TIRE SIZE WIDTH PLATFORM SIZE
TL27103 300 14" - 20" 22-1/2" x 14"
TL27104 300 22-1/2" - 24" 30" x 14"
23 WWW.TRADE-LOGIX.COM
CA
RG
O C
AR
RIE
RS
500LB CARGO CARRIER
Part No: TL35101
Capacity: 500lbs
Dimensions: 60-1/2” x 22”
1000LB CARGO CARRIER
Part No: TL35201
Capacity: 1000lbs
Dimensions: 60-1/2” x 24-3/4”
ATV CARGO CARRIER
Part No: TL35301
Universal Fit for most ATVs
24 WWW.TRADE-LOGIX.COM
DO
LLIE
S (W
HEE
L A
ND
TR
AIL
ER)
1000LB WHEEL DOLLY SET
Part No: TL13201
Capacity: 1000lbs
Four 3.5” Heavy Duty Swivel Caster Wheels
Sold in pairs
HYDRUALIC VEHICLE POSITIONING JACKS
Available in 9” and 12” Tire Width Models
Part No: TL13102 (9”) & TL13103 (12”)
Capacity: 1500lbs per jack
Easy foot-pedal lifting
Rolls easily in any direction
4 caster wheels for easy maneuverability
600LB TRAILER DOLLY
Part No: TL22301
Capacity: 600lbs
1 7/8” Chrome Hitch Ball
10” Pneumatic Tires
Great tool to have at the shop or home
25 WWW.TRADE-LOGIX.COM
PRODUCT WARRANTY INORMATION
Warranty
For one year from the date of purchase Trade Logix will replace for the original purchaser, or repair the product, unless otherwise stated in the warranty information provided for a specific product. The warranty will not apply to any unit which was not assembled correctly, misused, overloaded or which has been used or operated contrary to the manufacturer instructions, or which has been repaired or altered by anyone other than an authorized representative. Proof of purchase (ie. original purchase receipt) must accompany all claims. Warranty Exclusions
This warranty does not cover cosmetic defects such as paint, decals or wear items such as tires. This warranty will not cover failures or problems due to acts of God, or events or forces beyond the control of the manufacturer. Additionally, the warranty is not applicable if the product is used for commercial use or rental purposes. Normal Wear Exclusion
This warranty does not cover repair when normal use has exhausted the life of a part or the equipment as a whole. Installation, Use and Maintenance Exclusion
This warranty will not apply to parts and/or labor if the product has been misused, neglected, involved in an accident, abused, loaded beyond its limits, modified or assembled incorrectly. Normal maintenance is not covered under this warranty. Limits of Implied Warranty and Consequential Damage Exclusion
Trade Logix disclaims any obligation to cover any loss of time, use of this product, freight, or any incidental or consequential claim by anyone from using the product. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR. An exchange unit will be subject to the original warranty. The length of the warranty governing the exchanged unit will have the date as the purchase date of the original unit. This warranty gives you certain legal rights which may change from province to province. Your province may also have other rights you may be entitled to that are not listed within this warranty. Warranty service is available by contacting Trade Logix directly. This warranty applies only while this product is in use in Canada. Return Information All defective products must be returned to either Trade-Logix directly, an authorized service dealer, or distributor. If you require specific delivery instructions, please email Trade-Logix at [email protected] to obtain a RMA number. Please include your company name, address, product model number, reason for return, and a contact phone number. Contact Information:
Trade Logix PO Box 1450 Waterdown, Ontario L0R 2H0 Canada
Phone: (905) 581-2292
Fax: (905) 581-2293
WA
RR
AN
TY
26 WWW.TRADE-LOGIX.COM
DISTRIBUTED BY:
TRADE LOGIX Division of Euna Export and Import Ltd. PO Box 1450 Waterdown, ON Canada L0R 1K0 Tel: (905) 581-2292 Fax: (905) 581-2293 Email: [email protected] Website: www.trade-logix.com
TRADE LOGIX