AUTOPILOT DRIVE SOLUTIONS - octopusdrives.com Drives for... · EASY TO FIT -Installation kit bolts...

Dealer

OCTOPUS PRODUCTS7733 Progress WayDelta, BCCanada V4G 1A3 Phone: 1-604-940-2010Fax: 1-604-952-2650Email: [email protected] Website : www.octopusmarine.ca

©2012 Canada Metals (Pacific) LtdDesigned by Avalyn Design www.avalyn.co.uk

OCTOPUS EUROPE CBPG13 222 La MurtaAlzira 46600ValenciaSpain Phone: 00 34 962 120 052Email: [email protected] Website : www.octopuseurope.com

A U T O P I L O T D R I V E S O L U T I O N S

outboard sterndrive inboard

PRECISION PRODUCTS FOR CABLE STEERED POWERBOATS

www.octopusmarine.cawww.octopuseurope.com11

OPTIONAL RUDDER FEEDBACK UNITOne of the most complex and time-consumingaspects of autopilot installation is fitting therudder feedback unit, ensuring that thegeometry matches the full range of ruddermovement. The Octopus rudder feedbackunit solves these problems as it mountsdirectly to the drive unit itself.

OC15SUK19

OC15109-6OC15109-9OC15109-12

Universal Connection Kit – 8.5in stroke(included in kit)

Standard Steering Cable x 6ftStandard Steering Cable x 9ftStandard Steering Cable x 12ft

ACCESSORIES

FOR INBOARD ENGINE POWERBOATS WITH MECHANICAL STEERINGEASY TO BUYEverything you need supplied in one box - drive, 6ftsteering cable and universal connection kit.

EASY TO FITThe simple to mount installation kit and optionalintegrated rudder feedback make for easy fitting.

COMPACTThe remote drive unit has a tiny 0.25Ft2 footprintand can be mounted in the most convenient locationon your boat, horizontally or vertically.

RELIABLE & SAFEProven, tested design. The drive unit features amanual override without having to disengage theautopilot first.

COMPATIBLE WITH YOUR PILOTThe Type R Remote Drive System is compatible withall major brand inboard autopilot systems.

OC15SUK27

OC15SUK27AOC15SUK27BOC15SUK27DOC15SUK27E

OC15SUK83

Universal Model for all autopilots

For Comnav & Sitex AutopilotsFor Raymarine AutopilotsFor Coursemaster & Simrad AutopilotsFor Garmin, Furuno, Navman & TMQAutopilots

Simrad Resistance to FrequencyConversion Kit – Required for SimradAutopilots

RUDDER FEEDBACK MODULES

INSTALLATION ENVELOPE

Type R mechanical remote drive - inboard systems

ORDER CODE

MAXIMUM STROKE

PEAK THRUST

MAX RUDDER TORQUE

HARD OVER TIME

PEAK POWER

AVERAGE POWER

TILLER ARM RADIUS

MAX DISPLACEMENT(FULLY LADEN)

MAX BOAT LENGTH

VOLTAGE

CLUTCH CIRCUIT POWER

MDRESYS-E

216mm / 8.5in

136kg / 330lbs

250nm / 185 lbft

12-15 seconds

5 Amps

1.25 Amps

190mm / 7.5in

6000kg / 13,200lbs

10m / 32ft

12v DC

850mA

SPECIF ICATION

4www.octopusmarine.cawww.octopuseurope.com2

Autopilot drive solutions for cable steered powerboats

CONTENTSType S/T Dashboard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Type R Remote Drive - Sterndrive Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Type R Remote Drive - Outboard Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Type R Remote Drive - Inboard System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

OCTOPUS PRODUCTS - A WORLD LEADER IN THE DESIGN AND MANUFACTURE OF

OCTOPUS PROFESSIONAL SOLUTIONSPROFESSIONAL DISTRIBUTOROur innovative product range gives professional distributors / dealers the opportunity to offer the bestsolutions to their customers which gives added value to the installation and service supplied.

BOAT BUILDERSOur highly experienced team can assist with solutions to boat builder production requirements includinglean manufacturing techniques, and supply complete installation packs including all required parts andaccessories.

AUTOPILOT MANUFACTURERSOur highly experienced team can offer Autopilot manufacturers our personalized business model, wherewe provide engineering, prototyping and production support that is specifically designed to meet theirneeds, resulting in significant cost savings, increased reliability and innovation.

©2012 Canada Metals (Pacific) Ltd. The descriptions and guidelines shown in this literature should be used as a general reference only. For anyfurther technical information please contact our Technical Service.

Contents of this Brochure are based on the latest information available at the time of publication. CMP/Octopus assumes no responsibility for theaccuracy of the information contained herein. Product specifications are subject to change without notice.

WHY OCTOPUS?• Over 25 years experience designing and producing cutting-edge autopilot drive solutions

• Complete product solutions for all boat types (leisure & commercial) up to 120ft in length

• Unique drive designs for simple installation

• Integrated units, versatile and easy to install

• Customized products, compatible with all major autopilot brands

• We are committed to continuous product development and improvement

• 2 year warranty

Cable Steering Brochure US imp 6/1/12 13:18 Page 4


flexible installation,compact design

COMPACT AND CONVENIENT SOLUTION ALSOSUITABLEFOR SAILBOATS!


DISCREET INSTALLATION - All components mounted out of sight

EASY TO FIT - Can be located in very small spaces

PERFORMANCE - Responsive drive, little feedback resistance in Standby Mode

IDEAL FOR INBOARD ENGINED BOATS UP TO 32ft (10m) - 13,200lbs (6,000kg)


TYPE T TILT BEHIND DASH DRIVEThe Type T drive unit is for boats that require a behind-dash drive system but are currently fittedwith tilt steering - this unit offers all the features of the Type S drive, while still allowing the tiltangle of the steering wheel to be adjusted. SEE PAGES 4 & 5

TYPE R REMOTE DRIVEThe Type R remote drive offers a complete package solution for outboard, inboard and sterndriveengined powerboats with cable steering. The easy to fit packs contain everything you need toinstall the drive unit including steering cable, drive and fitting kit. SEE PAGES 6 - 10

• A range of solutions for outboard, inboard or sterndrive boats• Makes difficult cable-steering installations simple• No need to convert the boat to hydraulic steering• Ideal for modern boats with limited below deck space• All drives are completely hidden, no electronics exposed to the elements• Compatible with all major brand autopilot systems

TYPE S BEHIND DASH DRIVEThe innovative Type S drive unit replaces the existing manual cable helm unit with a combinedmanual helm and autopilot drive unit. Because it is mounted behind the dash it is completelyhidden for a professional-looking installation. SEE PAGES 4 & 5

AUTOPILOT DRIVE UNITS




OC15SUK15AOC15SUK15B

OC15109-6OC15109-9OC15109-12

Installation Kit – Yamaha 115-220 Installation Kit – Mercury-Mariner-Suzuki


ACCESSORIES

OC15SUK27


OC15SUK83





Type R mechanical remote drive - outboard systems

SUITABLE FOR MOST YAMAHA, MERCURY MARINER & SUZUKI ENGINESINNOVATIVE DESIGNFitting an autopilot to outboard engined boats used to be a major problem, but not any more. The Type RRemote Drive can be located in a convenient location away from the exposed outboard engine and theoptional integrated rudder feedback unit solves the often difficult problem of attaching a feedback unit tothe complicated outboard engine geometry.

EASY TO FITThe remote drive attaches to the outboard engine via a second steering cable (6ft/1.8m cable included -longer cables are available as separate accessories). The installation kit supplied fixes to the steeringcylinder using existing fittings - no additional holes need to be drilled.

6in (150mm)minimum radius

‘B’ Dimension ‘A’ DimensionMidstroke

REMOTE DRIVE DIMENSIONS SECOND CABLE LENGTH CALCULATIONAll Type R packs are supplied with a 6ft (1.8m) steering cable. Ifthis is not suitable then other lengths are available as separateaccessories. Use a length of rope or cable to plan the steeringcable route and then measure the total length required:

(‘A’ Dimension + ‘B’ Dimension) – 4in for a 90º bendRound up the result to the nearest foot. See below for cableorder codes.

OUTBOARD PACK ORDER CODESMDRESYS-C Yamaha 115-220HP 1984 onwards

MDRESYS-D Mercury Black Max 1980 onwards, Mariner 1980 onwards, Mercury/Mariner 2.4 (all models),Suzuki DT75–DT225, Suzuki DF60–DF140

6in (150mm)6in (150mm)

8in(200mm)


TYPE S BEHINDDASH DRIVE

TYPE T TILT BEHINDDASH DRIVE

Type S/T mechanical dashboard drive

UNIQUE AUTOPILOT DRIVES FOR CABLE STEERED BOATSPROFESSIONAL SOLUTION - Replaces manual helm with a manualhelm/autopilot drive combination.

totally out of sight!!!




SIMPLE SOLUTION FOR TRICKY INSTALLATIONS

RudderFeedbackUnit

outboard engine?no problem!

EASY TO FIT - Installation kit bolts to existing steeringsystem, no drilling required!

TIME SAVING - Rudder feedback option mounts directly on drive

COMPATIBLE WITH ALL MAJOR AUTOPILOT BRAND ELECTRONICS

MIN

25

0m

m (10

in) clearance

fron

t-back

(216

mm

/ 8.5

in w

ith sp

acers)

MIN 150mm (10in)clearanceMIN 115mm (4.5in)

clearanceMIN 90mm

(3.5in)clearance

DASHBOARD


Type S/T mechanical dashboard drive specification

PROFESSIONAL SOLUTIONS FOR STERNDRIVE & OUTBOARD ENGINESTYPE S BEHIND DASH DRIVEThe Straight shaft drive unit replaces the manualdrive used on cable steered boats and is mounteddirectly behind the dash. The drive is directlycompatible with the Morse 290 steering helm butcomes with its own bezel kit and can be retrofitted inmost installations using the cable and steering wheelfrom the manual steering helm on the boat.

TYPE T TILT BEHIND DASH DRIVEThis drive unit replaces a manual Tilt drive and ismounted directly behind the dash, but still allows theangle of the steering wheel to be changed. It usesthe front end from Teleflex SH91800 (not supplied).


OC15SUK10

OC15SUK09

OC15SUK07

OC15SUK08

OC15SUK11

OC15SUK16OC15SUK17OC15SUK18

90 degree Bezel Mounting Kitfor Type S Straight Shaft Drive


Steering Cable Adapter Kit forTFX SSC72, Uflex M47, Morse 304415

Steering Cable Adapter Kitfor TFX SSC62, Uflex M66

Adjustable Friction Brake for Type SStraight Shaft Drive with 90º Bezel Kit

Spacer Kit x 19mm for 90º Bezel KitSpacer Kit x 16mm for 20º Bezel KitSpacer Kit x 13mm for TFX PerformanceTilt Mechanism (Type T)

SPACE REQUIRED - TYPE S & TYPE T

TOP VIEW SIDE VIEW

ACCESSORIES

OC15SUK27


OC15SUK83






Remote DriveUnit

InstallationKit

DriveCable

Remote DriveUnit

InstallationKit

DriveCable

Remote DriveUnit

InstallationKitDrive

Cable (9ft)

InstallationKit

Remote DriveUnit

DriveCable


NOTES• For older Mercruiser engines (pre-94) use System B (MDRESYS-B)• Normal steering cables can also be used as supplied by Teleflex,

Uflex and Multiflex


CURRENT MERCRUISER ENGINES, AND NORTH AMERICAN BUILT VOLVO PENTAGAS & DIESEL ENGINES

SINGLE ENGINE SYSTEM AOrder MDRESYS-A

DUAL ENGINE SYSTEM AOrder MDRESYS-A plus 9ft Cable (Fits most applications)

ALL EUROPEAN BUILT VOLVO PENTA DIESEL ENGINESSINGLE ENGINE SYSTEM BOrder MDRESYS-B

DUAL ENGINE SYSTEM BOrder MDRESYS-B

Type R mechanical remote drive - sterndrive systems

SUITABLE FOR MOST MERCRUISER AND VOLVO PENTA SYSTEMS

OC15SUK12B

OC15SUK12C

OC15109-6OC15109-9

OC15109-12

Sterndrive Installation Kit for Mercruiserengines (from 1994) & Volvo Gas engines

Sterndrive Installation Kit for Volvo Dieselengines

Standard Steering Cable x 6 foot longStandard Steering Cable x 9 foot long(recommended for System A dual engineinstallation)Standard Steering Cable x 12 foot long

ACCESSORIES

OC15SUK27


OC15SUK83





STRAIGHTFORWARD INSTALLATIONThe Type R Remote Drive System makes sterndrive installations easy for both single or dual engine systems.The installation kit simply clamps to the steering cylinder with no drilling or cutting required. Two packs areavailable to suit the most common Mercruiser and Volvo-Penta sterndrive systems.

Optional RudderFeedback Unit



UNIQUE PILOT DRIVE FOR STERNDRIVE APPLICATIONS

STERNDRIVEENGINE

LOW COST SOLUTION - No need to change to hydraulic steering

EASY TO FIT - Simple to install kits


SAFE - Manual override without disengaging the autopilot


simple solutionsfor difficult installations


Remote DriveUnit

InstallationKit

DriveCable

Remote DriveUnit

InstallationKit

DriveCable

Remote DriveUnit

InstallationKitDrive

Cable (9ft)

InstallationKit

Remote DriveUnit

DriveCable


NOTES• For older Mercruiser engines (pre-94) use System B (MDRESYS-B)• Normal steering cables can also be used as supplied by Teleflex,

Uflex and Multiflex


CURRENT MERCRUISER ENGINES, AND NORTH AMERICAN BUILT VOLVO PENTAGAS & DIESEL ENGINES

SINGLE ENGINE SYSTEM AOrder MDRESYS-A

DUAL ENGINE SYSTEM AOrder MDRESYS-A plus 9ft Cable (Fits most applications)

ALL EUROPEAN BUILT VOLVO PENTA DIESEL ENGINESSINGLE ENGINE SYSTEM BOrder MDRESYS-B

DUAL ENGINE SYSTEM BOrder MDRESYS-B


SUITABLE FOR MOST MERCRUISER AND VOLVO PENTA SYSTEMS

OC15SUK12B

OC15SUK12C

OC15109-6OC15109-9

OC15109-12

Sterndrive Installation Kit for Mercruiserengines (from 1994) & Volvo Gas engines

Sterndrive Installation Kit for Volvo Dieselengines

Standard Steering Cable x 6 foot longStandard Steering Cable x 9 foot long(recommended for System A dual engineinstallation)Standard Steering Cable x 12 foot long

ACCESSORIES

OC15SUK27


OC15SUK83





STRAIGHTFORWARD INSTALLATIONThe Type R Remote Drive System makes sterndrive installations easy for both single or dual engine systems.The installation kit simply clamps to the steering cylinder with no drilling or cutting required. Two packs areavailable to suit the most common Mercruiser and Volvo-Penta sterndrive systems.

Optional RudderFeedback Unit



UNIQUE PILOT DRIVE FOR STERNDRIVE APPLICATIONS

STERNDRIVEENGINE

LOW COST SOLUTION - No need to change to hydraulic steering

EASY TO FIT - Simple to install kits


SAFE - Manual override without disengaging the autopilot


simple solutionsfor difficult installations




SIMPLE SOLUTION FOR TRICKY INSTALLATIONS

RudderFeedbackUnit

outboard engine?no problem!

EASY TO FIT - Installation kit bolts to existing steeringsystem, no drilling required!



MIN

25

0m

m (10

in) clearance

fron

t-back

(216

mm

/ 8.5

in w

ith sp

acers)

MIN 150mm (10in)clearanceMIN 115mm (4.5in)

clearanceMIN 90mm

(3.5in)clearance

DASHBOARD


Type S/T mechanical dashboard drive specification

PROFESSIONAL SOLUTIONS FOR STERNDRIVE & OUTBOARD ENGINESTYPE S BEHIND DASH DRIVEThe Straight shaft drive unit replaces the manualdrive used on cable steered boats and is mounteddirectly behind the dash. The drive is directlycompatible with the Morse 290 steering helm butcomes with its own bezel kit and can be retrofitted inmost installations using the cable and steering wheelfrom the manual steering helm on the boat.

TYPE T TILT BEHIND DASH DRIVEThis drive unit replaces a manual Tilt drive and ismounted directly behind the dash, but still allows theangle of the steering wheel to be changed. It usesthe front end from Teleflex SH91800 (not supplied).


OC15SUK10

OC15SUK09

OC15SUK07

OC15SUK08

OC15SUK11

OC15SUK16OC15SUK17OC15SUK18



Steering Cable Adapter Kit forTFX SSC72, Uflex M47, Morse 304415

Steering Cable Adapter Kitfor TFX SSC62, Uflex M66

Adjustable Friction Brake for Type SStraight Shaft Drive with 90º Bezel Kit

Spacer Kit x 19mm for 90º Bezel KitSpacer Kit x 16mm for 20º Bezel KitSpacer Kit x 13mm for TFX PerformanceTilt Mechanism (Type T)

SPACE REQUIRED - TYPE S & TYPE T

TOP VIEW SIDE VIEW

ACCESSORIES

OC15SUK27


OC15SUK83








OC15SUK15AOC15SUK15B

OC15109-6OC15109-9OC15109-12

Installation Kit – Yamaha 115-220 Installation Kit – Mercury-Mariner-Suzuki


ACCESSORIES

OC15SUK27


OC15SUK83






SUITABLE FOR MOST YAMAHA, MERCURY MARINER & SUZUKI ENGINESINNOVATIVE DESIGNFitting an autopilot to outboard engined boats used to be a major problem, but not any more. The Type RRemote Drive can be located in a convenient location away from the exposed outboard engine and theoptional integrated rudder feedback unit solves the often difficult problem of attaching a feedback unit tothe complicated outboard engine geometry.

EASY TO FITThe remote drive attaches to the outboard engine via a second steering cable (6ft/1.8m cable included -longer cables are available as separate accessories). The installation kit supplied fixes to the steeringcylinder using existing fittings - no additional holes need to be drilled.

6in (150mm)minimum radius

‘B’ Dimension ‘A’ DimensionMidstroke

REMOTE DRIVE DIMENSIONS SECOND CABLE LENGTH CALCULATIONAll Type R packs are supplied with a 6ft (1.8m) steering cable. Ifthis is not suitable then other lengths are available as separateaccessories. Use a length of rope or cable to plan the steeringcable route and then measure the total length required:

(‘A’ Dimension + ‘B’ Dimension) – 4in for a 90º bendRound up the result to the nearest foot. See below for cableorder codes.

OUTBOARD PACK ORDER CODESMDRESYS-C Yamaha 115-220HP 1984 onwards

MDRESYS-D Mercury Black Max 1980 onwards, Mariner 1980 onwards, Mercury/Mariner 2.4 (all models),Suzuki DT75–DT225, Suzuki DF60–DF140

6in (150mm)6in (150mm)

8in(200mm)


TYPE S BEHINDDASH DRIVE

TYPE T TILT BEHINDDASH DRIVE

Type S/T mechanical dashboard drive

UNIQUE AUTOPILOT DRIVES FOR CABLE STEERED BOATSPROFESSIONAL SOLUTION - Replaces manual helm with a manualhelm/autopilot drive combination.

totally out of sight!!!



flexible installation,compact design

COMPACT AND CONVENIENT SOLUTION ALSOSUITABLEFOR SAILBOATS!


DISCREET INSTALLATION - All components mounted out of sight

EASY TO FIT - Can be located in very small spaces

PERFORMANCE - Responsive drive, little feedback resistance in Standby Mode

IDEAL FOR INBOARD ENGINED BOATS UP TO 32ft (10m) - 13,200lbs (6,000kg)


TYPE T TILT BEHIND DASH DRIVEThe Type T drive unit is for boats that require a behind-dash drive system but are currently fittedwith tilt steering - this unit offers all the features of the Type S drive, while still allowing the tiltangle of the steering wheel to be adjusted. SEE PAGES 4 & 5

TYPE R REMOTE DRIVEThe Type R remote drive offers a complete package solution for outboard, inboard and sterndriveengined powerboats with cable steering. The easy to fit packs contain everything you need toinstall the drive unit including steering cable, drive and fitting kit. SEE PAGES 6 - 10

• A range of solutions for outboard, inboard or sterndrive boats• Makes difficult cable-steering installations simple• No need to convert the boat to hydraulic steering• Ideal for modern boats with limited below deck space• All drives are completely hidden, no electronics exposed to the elements• Compatible with all major brand autopilot systems

TYPE S BEHIND DASH DRIVEThe innovative Type S drive unit replaces the existing manual cable helm unit with a combinedmanual helm and autopilot drive unit. Because it is mounted behind the dash it is completelyhidden for a professional-looking installation. SEE PAGES 4 & 5

AUTOPILOT DRIVE UNITS




OC15SUK19

OC15109-6OC15109-9OC15109-12

Universal Connection Kit – 8.5in stroke(included in kit)


ACCESSORIES

FOR INBOARD ENGINE POWERBOATS WITH MECHANICAL STEERINGEASY TO BUYEverything you need supplied in one box - drive, 6ftsteering cable and universal connection kit.

EASY TO FITThe simple to mount installation kit and optionalintegrated rudder feedback make for easy fitting.

COMPACTThe remote drive unit has a tiny 0.25Ft2 footprintand can be mounted in the most convenient locationon your boat, horizontally or vertically.

RELIABLE & SAFEProven, tested design. The drive unit features amanual override without having to disengage theautopilot first.

COMPATIBLE WITH YOUR PILOTThe Type R Remote Drive System is compatible withall major brand inboard autopilot systems.

OC15SUK27


OC15SUK83





INSTALLATION ENVELOPE


ORDER CODE

MAXIMUM STROKE

PEAK THRUST

MAX RUDDER TORQUE

HARD OVER TIME

PEAK POWER

AVERAGE POWER

TILLER ARM RADIUS

MAX DISPLACEMENT(FULLY LADEN)

MAX BOAT LENGTH

VOLTAGE

CLUTCH CIRCUIT POWER

MDRESYS-E

216mm / 8.5in

136kg / 330lbs

250nm / 185 lbft

12-15 seconds

5 Amps

1.25 Amps

190mm / 7.5in

6000kg / 13,200lbs

10m / 32ft

12v DC

850mA

SPECIF ICATION


Autopilot drive solutions for cable steered powerboats

CONTENTSType S/T Dashboard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Type R Remote Drive - Sterndrive Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Type R Remote Drive - Outboard Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Type R Remote Drive - Inboard System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

OCTOPUS PRODUCTS - A WORLD LEADER IN THE DESIGN AND MANUFACTURE OF

OCTOPUS PROFESSIONAL SOLUTIONSPROFESSIONAL DISTRIBUTOROur innovative product range gives professional distributors / dealers the opportunity to offer the bestsolutions to their customers which gives added value to the installation and service supplied.

BOAT BUILDERSOur highly experienced team can assist with solutions to boat builder production requirements includinglean manufacturing techniques, and supply complete installation packs including all required parts andaccessories.

AUTOPILOT MANUFACTURERSOur highly experienced team can offer Autopilot manufacturers our personalized business model, wherewe provide engineering, prototyping and production support that is specifically designed to meet theirneeds, resulting in significant cost savings, increased reliability and innovation.

©2012 Canada Metals (Pacific) Ltd. The descriptions and guidelines shown in this literature should be used as a general reference only. For anyfurther technical information please contact our Technical Service.

Contents of this Brochure are based on the latest information available at the time of publication. CMP/Octopus assumes no responsibility for theaccuracy of the information contained herein. Product specifications are subject to change without notice.

WHY OCTOPUS?• Over 25 years experience designing and producing cutting-edge autopilot drive solutions

• Complete product solutions for all boat types (leisure & commercial) up to 120ft in length

• Unique drive designs for simple installation

• Integrated units, versatile and easy to install

• Customized products, compatible with all major autopilot brands

• We are committed to continuous product development and improvement

• 2 year warranty


Dealer

OCTOPUS PRODUCTS7733 Progress WayDelta, BCCanada V4G 1A3 Phone: 1-604-940-2010Fax: 1-604-952-2650Email: [email protected] Website : www.octopusmarine.ca

©2012 Canada Metals (Pacific) LtdDesigned by Avalyn Design www.avalyn.co.uk

OCTOPUS EUROPE CBPG13 222 La MurtaAlzira 46600ValenciaSpain Phone: 00 34 962 120 052Email: [email protected] Website : www.octopuseurope.com

P R E C I S I O N P R O D U C T S F O R C A B L E S T E E R E D P O W E R B O AT S

A U T O P I L O T D R I V E S O L U T I O N S 2 0 1 2

outboard sterndrive inboard


Date post:	15-Mar-2018
Category:	Documents
Upload:	vuongdang
View:	213 times
Download:	0 times

AUTOPILOT DRIVE SOLUTIONS - octopusdrives.com Drives for... · EASY TO FIT -Installation kit bolts...

Documents