model H1107.8
Barrier-Free Wall Mounted Electric Water Cooler
FEATURES & BENEFITS
CONSTRUCTIONHeavy-duty 14 gauge Type 304 Stainless Steal constructionwith integral 1/4" (.6 cm) mounting plates for extradurability. Unit also includes vandal-resistant bottom platesfor added peace-of-mind.
BUBBLER HEADPolished chrome-plated brass bubbler head features anintegral basin shank for added strength, and is equippedwith a shielded, anti-squirt orifice that provides a steadysanitary source of water.
BACK PANELStainless steel back panel helps to protect the wall frominadvertent splashing, and its decorative satin finishincreases location visibility and completes the fountainsattractive appearance.
INTEGRATED TRAPSpacious fountain design allows for the trap to be internallymounted which allows for easy access, and aids andreduces the installation process.
QUALITY CONTROLFountain is pre-built and fully water and pressure tested toensure no leaks and proper function for reducedinstallation time and added peace of mind.
GALVANIZED FINISHTough galvanized coating is ideal for areas wherevandalism and graffiti is an issue. Due to the galvanizingprocess, appearance of the finish may vary.
PUSH BUTTONWith its patented (Pat. # 6,981,692) stainless steel,push-button activated valve assembly which allows forfront access stream adjustment as well as cartridge andstrainer access, this fountain offers 100% lead freewaterways. The valve works at an operating pressure rangeof 30 to 90 psi (2.1 to 6.2 bar).
OPTIONS
Filter: Model 6426, 12" x 2" (30.5 x 5.1 cm), in-line leadremoval element that reduces lead from incoming watersupply.
To see all options for this model, visit www.hawsco.com
SPECIFICATIONS
Model H1107.8 electric wall mounted barrier-free watercooler shall include a 14 gauge Type 304 Stainless Steel satinfinish basin. Push-button operated stainless steel valve withfront-accessible cartridge and flow adjustment, 100%lead-free waterways, polished chrome-plated brassvandal-resistant bubbler head, and a polishedchrome-plated brass vandal-resistant waste strainer. Unit shallalso include a vandal-resistant bottom plate, satin stainlesssteel back panel and louvered intrusion-proof grill, and 1-1/4"IPS trap. Unit can be mounted to meet ADA or Child ADAspecifications. The R-134a refrigeration system is hermeticallysealed and delivers a minimum of 8 gph (30.3 L) of water at50° F (10° C) cooled from 80° F (26.7° C) inlet water at90° F (32.2° C) ambient. 115 Volts, 60Hz, rated watts: 370,full load amps: 5.
APPLICATIONS
Specifically, this type fountain may be placed in settings suchas: schools, office buildings, shopping malls, and other indoorenvironments. Electric water coolers are not recommendedor designed for outdoor applications or enclosed pool areas(chlorine). These conditions may void warranty.Model meets all current Federal Regulations for the disabledincluding those in the Americans with Disabilities Act. Hawsmanufactures drinking fountains and electric water coolers tobe lead-free by all known definitions including NSF/ANSIStandard 61, Section 9, California Proposition 65, and theFederal Safe Drinking Water Act. Product is compliant toCalifornia Health and Safety Code 116875 (AB 1953-2006).Haws electric water coolers comply with ARI Standard 1010and ANSI A117.1, and are listed by Underwriter Laboratories toU.S. and Canadian standards.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [email protected] :: www.hawsco.com :: 03 January, 2013DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.