of 14
8/9/2019 Bata Kenya Industrials Catalogue
1/14
Color
Construction
Upper
Lining
Anti-Penetration Sole
Insole
Safety ToecapMidsole
Outsole
Fitting
Standard
To keep footwear in usable conditions it is recommended to maintain
it always clean and polished. If wet, shoes should be dried at room
temperature. Never heat at stove.
Bata Industrials guarantees quality and durability of their products
against any manufacturing defects. It is recommended to use a
product suitable for your production activity or service. Quality+
applies to all Bata Industrials Footwear.
MAINTENANCE
DESCRIPTION DETAIL
SECTORS
ARTICLE
SIZE RANGE
CONTR. TECH.
FEATURES
DESCRIPTION
WARRANTY
Black
Cemented Rubber
Barton leather
No lining
No
Pre Form EVA textile
Metal 200 J ResistanceNo
Rubber
General purpose
NCh.772/1
SB
Safety shoe, made of leather .Excellent physical and chemical
properties, polyurethane midsole with low density . Outsole in
polyurethane ultra lightweight , excellent resistance to hydrocarbonsand their derivatives. Injected directly into the Uppers. U-Lock System
with full tongue stitched to the upper that protects from moisture and
particle penetration into the foot
SAFETY SHOES CERTIFICATED IN ISO CE 20345 SBLIGHT , COMFORT AND FLEXIBLE SHOE - SLIP AND OIL RESISTANT
CONCORD
805-6148
6 - 11
Cemented Rubber
8/9/2019 Bata Kenya Industrials Catalogue
2/14
Color
Construction
Upper
Lining
Anti-Penetration Sole
Insole
Safety ToecapMidsole
Outsole
Fitting
Standard
To keep footwear in usable conditions it is recommended to maintain
it always clean and polished. If wet, shoes should be dried at room
temperature. Never heat at stove.
Bata Industrials guarantees quality and durability of their products
against any manufacturing defects. It is recommended to use a
product suitable for your production activity or service. Quality+
applies to all Bata Industrials Footwear.
MAINTENANCE
DESCRIPTION DETAIL
SECTORS
ARTICLE
SIZE RANGE
CONTR. TECH.
FEATURES
DESCRIPTION
WARRANTY
Black
Cemented Rubber
Barton leather
No lining
No
Pre Form EVA textile
Metal 200 J ResistanceNo
Rubber
General purpose
NCh.772/1
SB
Safety shoe, made of leather .Excellent physical and chemical
properties, polyurethane midsole with low density . Outsole in
polyurethane ultra lightweight , excellent resistance to hydrocarbonsand their derivatives. Injected directly into the Uppers. U-Lock System
with full tongue stitched to the upper that protects from moisture and
particle penetration into the foot
SAFETY SHOES CERTIFICATED IN ISO CE 20345 SBLIGHT , COMFORT AND FLEXIBLE SHOE - SLIP AND OIL RESISTANT
CONCORD
805-6349
6 - 11
Cemented Rubber
8/9/2019 Bata Kenya Industrials Catalogue
3/14
Color
Construction
Upper
Lining
Anti-Penetration Sole
Insole
Safety ToecapMidsole
Outsole
Fitting
Standard
To keep footwear in usable conditions it is recommended to maintain
it always clean and polished. If wet, shoes should be dried at room
temperature. Never heat at stove.
Bata Industrials guarantees quality and durability of their products
against any manufacturing defects. It is recommended to use a
product suitable for your production activity or service. Quality+
applies to all Bata Industrials Footwear.
MAINTENANCE
DESCRIPTION DETAIL
SECTORS
ARTICLE
SIZE RANGE
CONTR. TECH.
FEATURES
DESCRIPTION
WARRANTY
Black
Injected Pu
Barton leather
Cambrella Lining
Yes
Anti-static non woven board
Metal 200 J ResistancePolyurethane Low Density
Polyurethane / Tunnel System
General purpose
CE in ISO 20345 S1 SRC
Certificated by Intertek
Safety Boot, made of leather .Excellent physical and chemical
properties, polyurethane midsole with low density . Outsole in
polyurethane ultra lightweight High Density, excellent resistance tohydrocarbons and their derivatives. Injected directly into the Uppers.
U-Lock System with full tongue stitched to the upper that protects
from moisture and particle penetration into the foot
SAFETY BOOTS CERTIFICATED IN ISO CE 20345 S1LIGHT , COMFORT AND FLEXIBLE BOOT - SLIP AND OIL RESISTANT
SIROCCO
495-6112/895-6112
4 - 12
Injected PU
8/9/2019 Bata Kenya Industrials Catalogue
4/14
Color
Construction
Upper
Lining
Anti-Penetration Sole
Insole
Safety ToecapMidsole
Outsole
Fitting
Standard
To keep footwear in usable conditions it is recommended to maintain
it always clean and polished. If wet, shoes should be dried at room
temperature. Never heat at stove.
Bata Industrials guarantees quality and durability of their products
against any manufacturing defects. It is recommended to use a
product suitable for your production activity or service. Quality+
applies to all Bata Industrials Footwear.
MAINTENANCE
DESCRIPTION DETAIL
SECTORS
ARTICLE
SIZE RANGE
CONTR. TECH.
FEATURES
DESCRIPTION
WARRANTY
Black
Injected Pu
Barton leather
Cambrella Lining
Yes
Anti static non woven board
Metal 200 J ResistancePolyurethane Low Density
Polyurethane / Tunnel System
General purpose
CE in ISO 20345 S1 SRC
Certificated by Intertek
Safety Boot, made of leather .Excellent physical and chemical
properties, polyurethane midsole with low density . Outsole in
polyurethane ultra lightweight High Density, excellent resistance tohydrocarbons and their derivatives. Injected directly into the Uppers.
U-Lock System with full tongue stitched to the upper that protects
from moisture and particle penetration into the foot
SAFETY BOOTS CERTIFICATED IN ISO CE 20345 S1LIGHT , COMFORT AND FLEXIBLE BOOT - SLIP AND OIL RESISTANT
BORA
495-6113/895-6113
4 - 12
Injected PU
8/9/2019 Bata Kenya Industrials Catalogue
5/14
Color
Construction
Upper
Lining
Anti-Penetration Sole
Insole
Safety ToecapMidsole
Outsole
Fitting
Standard
To keep footwear in usable conditions it is recommended to maintain
it always clean and polished. If wet, shoes should be dried at room
temperature. Never heat at stove.
Bata Industrials guarantees quality and durability of their products
against any manufacturing defects. It is recommended to use a
product suitable for your production activity or service. Quality+
applies to all Bata Industrials Footwear.
MAINTENANCE
DESCRIPTION DETAIL
SECTORS
ARTICLE
SIZE RANGE
CONTR. TECH.
FEATURES
DESCRIPTION
WARRANTY
Black
Injected Pu
Barton leather
Cambrella Lining
No
Anti-static non woven board
Metal 200 J ResistancePolyurethane Low Density
PU high density / Tunnel System
General purpose
CE in ISO 20345 S1 SRC
Certificated by Intertek
Safety Boot, made of leather .Excellent physical and chemical
properties, polyurethane midsole with low density . Outsole in
polyurethane ultra lightweight , excellent resistance to hydrocarbonsand their derivatives. Injected directly into the Uppers. U-Lock System
with full tongue stitched to the upper that protects from moisture and
particle penetration into the foot
SAFETY BOOTS CERTIFICATED IN ISO CE 20345 S1LIGHT , COMFORT AND FLEXIBLE BOOT - SLIP AND OIL RESISTANT
MAESTRO
895-6114
6 - 11
Injected PU
8/9/2019 Bata Kenya Industrials Catalogue
6/14
Color
Construction
Upper
Lining
Anti-Penetration Sole
Insole
Safety ToecapMidsole
Outsole
Fitting
Standard
To keep footwear in usable conditions it is recommended to maintain
it always clean and polished. If wet, shoes should be dried at room
temperature. Never heat at stove.
Bata Industrials guarantees quality and durability of their products
against any manufacturing defects. It is recommended to use a
product suitable for your production activity or service. Quality+
applies to all Bata Industrials Footwear.
MAINTENANCE
DESCRIPTION DETAIL
SECTORS
ARTICLE
SIZE RANGE
CONTR. TECH.
FEATURES
DESCRIPTION
WARRANTY
Black
Injected Pu
Barton leather
Cambrella Lining
No
Anti static non woven board
Metal 200 J ResistancePolyurethane Low Density
PU high density / Tunnel System
General purpose
CE in ISO 20345 S1 SRC
Certificated by Intertek
Safety shoe, made of leather .Excellent physical and chemical
properties, polyurethane midsole with low density . Outsole in
polyurethane ultra lightweight , excellent resistance to hydrocarbonsand their derivatives. Injected directly into the Uppers. U-Lock System
with full tongue stitched to the upper that protects from moisture and
particle penetration into the foot
SAFETY SHOES CERTIFICATED IN ISO CE 20345 S1LIGHT , COMFORT AND FLEXIBLE SHOE - SLIP AND OIL RESISTANT
LEVANTO
895-4115
6 - 11
Injected PU
8/9/2019 Bata Kenya Industrials Catalogue
7/14
Color
Construction
Upper
Lining
Anti-Penetration Sole
Insole
Safety ToecapMidsole
Outsole
Fitting
Standard
To keep footwear in usable conditions it is recommended to maintain
it always clean and polished. If wet, shoes should be dried at room
temperature. Never heat at stove.
Bata Industrials guarantees quality and durability of their products
against any manufacturing defects. It is recommended to use a
product suitable for your production activity or service. Quality+
applies to all Bata Industrials Footwear.
MAINTENANCE
DESCRIPTION DETAIL
SECTORS
ARTICLE
SIZE RANGE
CONTR. TECH.
FEATURES
DESCRIPTION
WARRANTY
Black
Injected Pu
Action leather
Cambrella
No
Eva Pre Molded
Metal 200 J ResistanceOnly one density
Polyurethane Bata Professional
General purpose/Dress
CE in ISO 20345 S1 SRC
Certificated by Intertek
Safety shoe, made of high quality leather. Excellent physical and
chemical properties, polyurethane midsole with low density. Outsole
in polyurethane ultra lightweight High Density, excellent resistance tohydrocarbons and their derivatives. Injected directly into uppers.
Ulock System with Full tongue stitched to the upper that protects from
moisture and particle penetration into the foot.
SAFETY EXECUTIVE DRESS CERTIFICATED IN ISO CE 20345 S1LIGHT , COMFORT AND FLEXIBLE BOOT - SLIP AND OIL RESISTANT
RHINNO
895-6108
6 - 12
Injected PU
8/9/2019 Bata Kenya Industrials Catalogue
8/14
Color
Construction
Upper
Lining
Anti-Penetration Sole
Insole
Safety ToecapMidsole
Outsole
Fitting
Standard
To keep footwear in usable conditions it is recommended to maintain
it always clean and polished. If wet, shoes should be dried at room
temperature. Never heat at stove.
Bata Industrials guarantees quality and durability of their products
against any manufacturing defects. It is recommended to use a
product suitable for your production activity or service. Quality+
applies to all Bata Industrials Footwear.
MAINTENANCE
DESCRIPTION DETAIL
SECTORS
ARTICLE
SIZE RANGE
CONTR. TECH.
FEATURES
DESCRIPTION
WARRANTY
Black
Injection process
Smooth Leather
Woven fabric
No
Eva Pre Molded
Metal 200 J ResistanceNo
PU / Tunnel System
General purpose
CE in ISO 20345 S1 SRC
Certificated by Intertek
Safety Boot, made of leather .Excellent physical and chemical
properties, polyurethane Bi Density shoe Midsole with low density.
Outsole in polyurethane with high Durability and Density, excellentresistance to hydrocarbons and their derivatives . Injected directly into
the uppers. U lock system with full tongue stitched to the upper that
protects from moisture and particle penetration into the foot. Very light
shoe.
SAFETY BOOTS CERTIFICATED IN ISO CE 20345 S1MULTI PURPOSE BOOT - SLIP AND OIL RESISTANT
RIVER
805-6151
6 - 11
Injected TPU/PU
8/9/2019 Bata Kenya Industrials Catalogue
9/14
Color
Construction
Upper
Lining
Anti-Penetration Sole
Insole
Safety ToecapMidsole
Outsole
Fitting
Standard
To keep footwear in usable conditions it is recommended to maintain
it always clean and polished. If wet, shoes should be dried at room
temperature. Never heat at stove.
Bata Industrials guarantees quality and durability of their products
against any manufacturing defects. It is recommended to use a
product suitable for your production activity or service. Quality+
applies to all Bata Industrials Footwear.
MAINTENANCE
DESCRIPTION DETAIL
SECTORS
ARTICLE
SIZE RANGE
CONTR. TECH.
FEATURES
DESCRIPTION
WARRANTY
Black / Grey
Injected Pu
Smooth leather
Bata Ventair Lining
No
Eva Pre Molded
Metal 200 J ResistancePolyurethane Low Density
Polyurethane / Tunnel System
General purpose
CE in ISO 20345 S1 SRC
Certificated by Intertek
Safety Boot, made of leather .Excellent physical and chemical
properties, Polyurethane midsole with Low Density . Outsole in
polyurethane ultra lightweight High Density, excellent resistance tohydrocarbons and their derivatives. Injected directly into the Uppers.
U-Lock System with full tongue stitched to the upper that protects
from moisture and particle penetration into the foot
SAFETY BOOTS CERTIFICATED IN ISO CE 20345 S1LIGHT , COMFORT AND FLEXIBLE BOOT - SLIP AND OIL RESISTANT
BEAT
805-6150
6 - 11
Injected PU
8/9/2019 Bata Kenya Industrials Catalogue
10/14
Color
Construction
Upper
Lining
Anti-Penetration Sole
Insole
Safety ToecapMidsole
Outsole
Fitting
Standard
To keep footwear in usable conditions it is recommended to maintain
it always clean and polished. If wet, shoes should be dried at room
temperature. Never heat at stove.
Bata Industrials guarantees quality and durability of their products
against any manufacturing defects. It is recommended to use a
product suitable for your production activity or service. Quality+
applies to all Bata Industrials Footwear.
MAINTENANCE
DESCRIPTION DETAIL
SECTORS
ARTICLE
SIZE RANGE
CONTR. TECH.
FEATURES
DESCRIPTION
WARRANTY
Orange/Grey
Cemented
Leather (Nubuck )/Fabric
Woven Fabric
Yes
Woven Fabric
Composite Toe 200 J ResistanceInjected EVA
TPU Rubber/ Tunnel System
General purpose
CE in ISO 20345 S1 SRC
Certificated by Intertek
Safety Boot, made of leather .Excellent physical and chemical
properties, polyurethane midsole with low density. Outsole in
polyurethane ultra lightweight High density, excellent resistance tohydrocarbons and their derivatives. Injected into the Uppers.
U-Lock system with full tongue stitched to the upper that protectsfrom moisture and particle penetration into the foot.
SAFTEY BOOTS CERTIFICATED IN ISO CE 20345 S1LIGHT , COMFORT AND FLEXIBLE BOOT - SLIP AND OIL RESISTANT
BICKZ 205
895-6133
6 - 12
Injected TPU Rubber
8/9/2019 Bata Kenya Industrials Catalogue
11/14
Color
Construction
Upper
Lining
Anti-Penetration Sole
Insole
Safety ToecapMidsole
Outsole
Fitting
Standard
To keep footwear in usable conditions it is recommended to maintain
it always clean and polished. If wet, shoes should be dried at room
temperature. Never heat at stove.
Bata Industrials guarantees quality and durability of their products
against any manufacturing defects. It is recommended to use a
product suitable for your production activity or service. Quality+
applies to all Bata Industrials Footwear.
MAINTENANCE
DESCRIPTION DETAIL
SECTORS
ARTICLE
SIZE RANGE
CONTR. TECH.
FEATURES
DESCRIPTION
WARRANTY
Beige/Black
Cemented
Leather (Nubuck )
Woven Fabric
Yes
Woven Fabric
Composite Toe 200 J ResistanceInjected EVA
TPU Rubber/ Tunnel System
General purpose
CE in ISO 20345 S1 SRC
Certificated by Intertek
Safety Boot, made of leather .Excellent physical and chemical
properties, polyurethane midsole with low density. Outsole in
polyurethane ultra lightweight High density, excellent resistance tohydrocarbons and their derivatives. Injected into the Uppers.
U-Lock system with full tongue stitched to the upper that protectsfrom moisture and particle penetration into the foot.
SAFTEY BOOTS CERTIFICATED IN ISO CE 20345 S1LIGHT , COMFORT AND FLEXIBLE BOOT - SLIP AND OIL RESISTANT
BICKZ 203
895-6122
6 - 12
Injected TPU Rubber
8/9/2019 Bata Kenya Industrials Catalogue
12/14
Color
Construction
Upper
Lining
Anti-Penetration Sole
Insole
Safety ToecapMidsole
Outsole
Fitting
Standard
To keep footwear in usable conditions it is recommended to maintain
it always clean and polished. If wet, shoes should be dried at room
temperature. Never heat at stove.
Bata Industrials guarantees quality and durability of their products
against any manufacturing defects. It is recommended to use a
product suitable for your production activity or service. Quality+
applies to all Bata Industrials Footwear.
MAINTENANCE
DESCRIPTION DETAIL
SECTORS
ARTICLE
SIZE RANGE
CONTR. TECH.
FEATURES
DESCRIPTION
WARRANTY
Black / Beige
Injection Process
Leather
Woven Fabric
Yes
Woven Fabric
Composite Toe 200 J ResistanceInjected EVA
TPU rubber / Tunnel System
General purpose
CE in ISO 20345 S1 SRC
Certificated by Intertek
Safety Boot, made of leather .Excellent physical and chemical
properties, polyurethane midsole with low density. Outsole in
polyurethane ultra lightweight High density, excellent resistance tohydrocarbons and their derivatives. Injected into the Uppers.
U-Lock system with full tongue stitched to the upper that protectsfrom moisture and particle penetration into the foot.
SAFETY BOOTS CERTIFICATED IN ISO CE 20345 S1LIGHT , COMFORT AND FLEXIBLE BOOT - SLIP AND OIL RESISTANT
TREND MESH
505-2127
3 8 (LADIES)
Injected TPU Rubber
8/9/2019 Bata Kenya Industrials Catalogue
13/14
Color
Construction
Upper
Lining
Anti-Penetration Sole
Insole
Safety ToecapMidsole
Outsole
Fitting
Standard
To keep footwear in usable conditions it is recommended to maintain
it always clean and polished. If wet, shoes should be dried at room
temperature. Never heat at stove.
Bata Industrials guarantees quality and durability of their products
against any manufacturing defects. It is recommended to use a
product suitable for your production activity or service. Quality+
applies to all Bata Industrials Footwear.
MAINTENANCE
DESCRIPTION DETAIL
SECTORS
ARTICLE
SIZE RANGE
CONTR. TECH.
FEATURES
DESCRIPTION
WARRANTY
Black / Beige
Cemented
Leather (Nubuck Top Quality)
Mesh
Yes
Eva preform
Composite Toe 200 J ResistanceInjected EVA
TPU Rubber / Tunnel System
General purpose
CE in ISO 20345 S1 SRC
Certificated by Intertek
Safety Boot, made of leather .Excellent physical and chemical
properties, Eva injected midsole with high cushioning. Outsole in
rubber bi color. Excellent resistance to hydrocarbons and theirderivatives. Composite Toe Cap, TPU stabilizer with high
performance.
TOP OF THE LINE BOOT. CERTIFICATED IN ISO CE 20345 S1LIGHT , COMFORT AND FLEXIBLE BOOT - SLIP AND OIL RESISTANT
LANCER MESH
805-2121
6 - 11
Cemented Rubber Outsole
8/9/2019 Bata Kenya Industrials Catalogue
14/14
Color
Construction
Upper
Lining
Anti-Penetration Sole
Insole
Safety ToecapMidsole
Outsole
Fitting
Standard
To keep footwear in usable conditions it is recommended to maintain
it always clean and polished. If wet, shoes should be dried at room
temperature. Never heat at stove.
Bata Industrials guarantees quality and durability of their products
against any manufacturing defects. It is recommended to use a
product suitable for your production activity or service. Quality+
applies to all Bata Industrials Footwear.
MAINTENANCE
DESCRIPTION DETAIL
SECTORS
ARTICLE
SIZE RANGE
CONTR. TECH.
FEATURES
DESCRIPTION
WARRANTY
Beige/Grey
Cemented
Leather (Nubuck )
Woven Fabric
Yes
Woven Fabric
Composite Toe 200 J ResistanceInjected EVA
TPU Rubber/ Tunnel System
General purpose
CE in ISO 20345 S1 SRC
Certificated by Intertek
Safety Boot, made of leather .Excellent physical and chemical
properties, polyurethane midsole with low density. Outsole in
polyurethane ultra lightweight High density, excellent resistance tohydrocarbons and their derivatives. Injected into the Uppers.
U-Lock system with full tongue stitched to the upper that protectsfrom moisture and particle penetration into the foot.
SAFTEY BOOTS CERTIFICATED IN ISO CE 20345 S1LIGHT , COMFORT AND FLEXIBLE BOOT - SLIP AND OIL RESISTANT
ACCESS - MESH
805-4120
6 - 12
Injected TPU Rubber
