Bezflow Nipple Watering System
. Economical cum quality design with low maintenance.
. 3600 soft trigger nipple can be used immediate on the 1st day rearing.
. 120cc/min high flow rate of watering can be achieved during grower stage.
. Drip cup will help to keep the litter dry.
. Optimum water pressure can be maintained by pressure regulator at all bird age.
. Nipple Pipe and aluminum Profile support are totally rust resistance components.
. Automatic flush end kit makes flushing simply and easy.
. Medicator kit will makes the medication process simple with precise dosage without waste.
Bezflow Nipple Watering System is designed to provide hygiene and easy-maintain water supply to poultry farm.
Nipple Flow Rate : 120 cc/min
Drip Cup : Included
PVC Pipe : 22 x 22 mm Square
14 feet / 4.27m per pipe
Support Rail : Aluminum Profile for broiler
14 feet/ 4.27m per rail GI Conduit Pipe dia 26.7mm for
breeder 10feet/3.3m per pipe
Recommended Broiler per nipple : 10 to 15
Recommended Breeder per nipple : 8 to 10
Pressure Regulator : Front or middle arrangement
with flush kit
End Vent Kit : Auto Flush
Mid Vent Kit : Optional
TECHNICAL INFORMATION
Bezflow Nipple Watering System
Pristine Dyanmics Sdn. Bhd. (352630-T) E mail : [email protected] http://pristine.com.my
PT8638, Jalan Johan 2/6, Kawasan Perindustrian Pengkalan, Fasa 2 , 31550 Pusing, Perak, Malaysia. Tel: 605 366 6998, 6016 523 22283, Fax 605 363 3299
© Copyright 2010 Pristine Dynamics Sdn. Bhd. All Rights Reserved.
Bezflow Nipple Watering System works well in hot climates and in totally controlled
environment house. Starts from day one to grow stage, chicks can trigger water flow by pecking nipple pin side or upwards from any direction 3600. Our watering system provides
high water flow rate which will result in better feed conversion and weight gains.
Square pipe supported by Aluminum Profile with simple holder makes installation fast and
simple. For breeder waterer, uses our heavy gauge galvanized (both outer and inner) Support Conduit Pipe that gives almost maintenance free result.
Water regulator allows
adjustable pressure with high volume of water
supply. Flushing your lines is even
easier and simpler now!
Just turn the handle from Regulate to Flush, water
will flushes out through the Auto Flush Kit installed at
the end of the lines.
The innovative Vent Kit is
designed such that it can be installed anywhere along the
water line :- in front, middle or end of line. If you have
low ceiling height, you can
fold the View Tube by pressing it down to the
horizontal pipe line before
raising your water lines so that you do not damage
the View Tube.