DENTAL LAB CATALOGUE 2018
Precision Rotary InstrumentsBIG CAT
recommended applications
ProductLine Zi
rco
nia
sint
ered
Zir
coni
a un
sin
tere
d
Cer
amic
Co
mpo
site
Den
ture
acr
ylic
No
n-pr
ecio
us a
lloys
Pre
cio
us m
etal
s /
Am
alga
m
Tita
nium
Pee
k
Pag
e
PANTHER 3
WILDCAT 6
MARGAY 7
SERVAL 8
JUNGLE CAT 9
BOBCAT 10
JAGUAR 12
LEOPARD 13
DESERT CAT 14
LYNX 15
COUGAR 16
OCELOT 17
PUMA 17
CHEETAH 18
TIGER 19
LION C + M 20
LION F + XF 21
recommended suit able
Den
tal L
ab
2
3
Den
tal L
ab
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
5 Ultra-Premium Line for all-ceramic restorations 5 High-gloss polish in just two steps 5 Perfect surface for antagonist protection 5 Long service life 5 Roughened surfaces for immediate use 5 Various shapes for all situations 5 Soft bonding for smooth grinding
PANTHER
PANTHER | M PANTHER100 PANTHER102 PANTHER104 PANTHER108
Grit medium
| Sizes [mm] Ø 5.5 x 18 Ø 26 x 2 Ø 17 x 2.4 Ø 15 x 1
| Shank 104-HP 104-HP 104-HP 104-HP
optimal / maximum rpm 12,000/20,000 8,000/20.,000 8,000/20,000 8,000/20,000
| Sizes [mm] Ø 5.5 x 18 Ø 26 x 2 Ø 17 x 2.4 Ø 15 x 1
| Shank 104-HP 104-HP 104-HP 104-HP
optimal / maximum rpm 12,000/20,000 8,000/20,000 8,000/20,000 8,000/20,000
| Sizes [mm] Ø 17 Ø 19
| Shank 104-HP 104-HP
optimal / maximum rpm 12,000/15,000 12,000/15,000
PANTHER | XF
Equipment
PANTHER101
PANTHER110
PANTHER103
PANTHER106
PANTHER105
PANTHER107
PANTHER109
Grit extra fine
For Zirconium Oxide / Ceramic
Part #
Part #
Part #
Diamond Polishing Paste(20 grams)
PANTHER111
Panther edition kit
Part# 10 Pack $ 3 Pack $ Single $PANTHER100 $39.95PANTHER101 $39.95PANTHER102 $64.95PANTHER103 $64.95PANTHER104 $95.95PANTHER105 $95.95PANTHER106 $24.95PANTHER107 $24.95PANTHER108 $95.95PANTHER109 $95.95PANTHER110 $129.95
PANTHER111 kit $349.95
4
Den
tal L
ab
PANTHERFor Zirconium Oxide / Ceramic
PANTHER | R PANTHER113 PANTHER115
Grit Rough
| Sizes [mm] Ø 26 x 2 Ø 15 x 1
| Shank 104-HP 104-HP
optimal / maximum rpm 8,000/20,000 8,000/20.,000
Part #
PANTHER | S PANTHER102 PANTHER108
Grit Smooth
| Sizes [mm] Ø 26 x 2 Ø 15 x 1
| Shank 104-HP 104-HP
optimal / maximum rpm 8,000/20,000 8,000/20,000
Part #
The surface of the implant abutment in the transmucosal area plays an important role. If the surface is too rough, the risk of increased plaque accumulation occurs. If the surface is too smooth, the fibroplasts of the peri-implant mucosa cannot "fuse/heal" optimally. Various studies have determined a threshold exists when plaque adhesion is low and fibroplasts can fuse/heal at the same time.
The ideal surface roughness is between (µm: Ra = 0.21 - 0.40).
Too rough = > 0.41 µm
Ideal = 0.21 - 0.41 µm
Too smooth = < 0.2 µm
Panther Abutment Polishing System
Part# 10 Pack $ 3 Pack $ Single $PANTHER102 $64.95PANTHER108 $95.95
PANTHER112 kit $199.95PANTHER113 $64.95PANTHER115 $95.95
Panther Abutment Polishing KitPart # PANTHER112
The PANTHER ABUTMENT SURFACE protocolcan be used for titanium, ceramic or hybridabutments by following the two steps below.
1. In the first step, excess glue and other materialsshould be removed with the PANTHER lense rough.This instrument has a coarse diamond grain.
2. In the second step, the desired residual roughnesswill be applied. The PANTHER lense smooth achievesan average roughness of approx. 0.34 µm.
5
Den
tal L
ab
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
5 Specially designed for green state zirconia applications 5 High durability 5 Smooth handling
WILDCAT | M WILDCAT100 WILDCAT102 WILDCAT104
Grit medium
| Sizes [mm] Ø 5.6 x 13 Ø 7 x 13 Ø 15 x 0.3
| Shank 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
WILDCAT | M/F WILDCAT106
Grit medium/fine
| Sizes [mm] Ø 7 x 19
| Shank 104-HP
optimal / maximum rpm 8,000 / 20,000
For Zirconium Oxide (unsintered)
WILDCAT
Part #
Part #
Part# 10 Pack $ Single $WILDCAT100 $34.95WILDCAT102 $34.95WILDCAT104 $39.95WILDCAT106 $94.95 $13.95
6
Den
tal L
ab
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
The unique Weissling polisher was developed in close collaboration with experts and laboratories working directly with such practical applications.
The special features include the precise form of the polisher, which is perfectly tailored to the task and its two assembled abrasive material zones. The grey zone reduces zirconia quickly, and the pigment-free white zone is used for precise fine-polishing, with no risk of surface colouring or damage to the precious working part.
The result: precise, efficient and reduced risk of damage.
Grey zone: quick reduction of the milling sprues.
White Zone: Step two – same polisher. Risk-free contouring through reduced removal.
Two in One: fast, accurate and reliable processing.
5 Specially designed for removal of milling sprues 5 Developed with dental technicians
For Zirconium Oxide (unsintered)
MARGAY
MARGAY | M/F MARGAY100Grit medium/fine
| Sizes [mm] Ø 10 x 22.7
| Shank 104-HP
optimal / maximum rpm 8,000 / 20,000
Part #
Part# 10 Pack $ Single $MARGAY100 $129.95 $14.95
7
Den
tal L
ab
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
5 Premium Line For Sintered Zirconia restorations 5 Excellent wear and tear characteristics 5 High concentration of diamond grit
SERVAL146
For Zirconium Oxide (sintered)
SERVAL
SERVAL | XC
SERVAL | M
Grit extra coarse
Grit medium
| Sizes [mm] Ø 26 x 2 Ø 22 x 3.2 Ø 5.5 x 16 Ø 11.5 x 2.4 Ø 6 x 15
| Shank 104-HP 104-HP 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 15,000 / 20,000 6,000 / 20,000 15,000 / 20,000
| Sizes [mm] Ø 26 x 2 Ø 22 x 3.2 Ø 5.5 x 16 Ø 11.5 x 2.4 Ø 6 x 15
| Shank 104-HP 104-HP 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 15,000 / 20,000 6,000 / 20,000 15,000 / 20,000
| Sizes [mm] Ø 26 x 2 Ø 22 x 3.2 Ø 5.5 x 16 Ø 11.5 x 2.4 Ø 6 x 15
| Shank 104-HP 104-HP 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 15,000 / 20,000 6,000 / 20,000 15,000 / 20,000
Grit fine
SERVAL108 SERVAL126SERVAL116 SERVAL138
SERVAL104SERVAL114 SERVAL122 SERVAL134SERVAL144
SERVAL | F SERVAL100 SERVAL118 SERVAL130SERVAL142SERVAL112
Part #
Part #
Part #
Part# 10 Pack $ Single $SERVAL100 $139.95 $19.95SERVAL104 $139.95 $19.95SERVAL108 $139.95 $19.95SERVAL112 $54.95SERVAL114 $54.95SERVAL116 $54.95SERVAL118 $139.95 $19.95SERVAL122 $139.95 $19.95SERVAL126 $139.95 $19.95SERVAL130 $129.95 $16.95SERVAL134 $129.95 $16.95SERVAL138 $129.95 $16.95SERVAL142 $35.95SERVAL144 $35.95SERVAL146 $35.95
8
Den
tal L
ab
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
For Ceramic
JUNGLE CAT
JUNGLE CAT | C JUNGLECAT100 JUNGLECAT106
Grit Coarse
| Sizes [mm] Ø 5 x 13 Ø 4 x 10.5 Ø 15 x 3.5 Ø 22 x 4.5 Ø 22 x 2
| Shank 104-HP 104-HP 104-HP 104-HP 104-HP
optimal / maximum rpm 15,000 / 20,000 15,000 / 20,000 10,000/20,000 10,000/20,000 10,000/20,000
JUNGLE CAT | M JUNGLECAT118 JUNGLECAT102 JUNGLECAT104 JUNGLECAT108 JUNGLECAT110Grit medium
| Sizes [mm] Ø 12 x 6.5 Ø 5 x 13 Ø 6.5 x 13 Ø 4 x 10.5 Ø 12 x 2.4
| Shank 104-HP 104-HP 104-HP 104-HP 104-HP
optimal / maximum rpm 10,000 / 20,000 15,000 / 20,000 15,000 / 20,000 15,000 / 20,000 10,000 / 20,000
JUNGLECAT112 JUNGLECAT122 JUNGLECAT128 JUNGLECAT134
| Sizes [mm] Ø 15 x 3.5 Ø 22 x 4.5 Ø 22 x 2.1 Ø 22 x 2
| Shank 900 / 104-HP 900 / 104-HP 900 / 104-HP 900 / 104-HP
optimal / maximum rpm 10,000 / 20,000 10,000 / 20,000 10,000 / 20,000 10,000 / 20,000
| Mandrels A / B A / B A / B A / B
| matching mandrels please see page 22
JUNGLECAT114 JUNGLECAT120 JUNGLECAT132
Part #
Part #
Part #
Part# Single $JUNGLECAT100 $34.95JUNGLECAT102 $34.95JUNGLECAT104 $34.95JUNGLECAT106 $34.95JUNGLECAT108 $34.95JUNGLECAT110 $38.95JUNGLECAT112 $42.95JUNGLECAT114 $42.95JUNGLECAT118 $42.95JUNGLECAT120 $74.95JUNGLECAT122 $72.95JUNGLECAT128 $59.95JUNGLECAT132 $52.95JUNGLECAT134 $52.95
5 Our Premium Line 5 Ceramic bonded grinding stone for ceramic and Zirconia 5 Special formulation for an extremely long service life 5 Minimal residual roughness 5 Steady grinding with low heat
9
Den
tal L
ab
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
5 Our Value Line 5 Suitable for all kind of ceramics 5 High durability 5 Effective and quick polishing 5 Proven diamond technology
Polisher surface grit C (coarse) Polisher surface grit M (medium) Polisher surface grit F (fine)
Part #
Part #
BOBCAT | C BOBCAT124 BOBCAT160 BOBCAT152
Grit coarse
| Sizes [mm] Ø 26 x 2 Ø 17 x 2.6 Ø 22 x 3.2
| Shank 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
BOBCAT | C BOBCAT100 BOBCAT130 BOBCAT176
Grit coarse
| Sizes [mm] Ø 5.5 x 18 Ø 11.5 x 2.4 Ø 22 x 3.5
| Shank 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
BOBCATFor Ceramic
Part# 10 Pack $ Single $BOBCAT100 $149.95 $16.95BOBCAT124 $32.95BOBCAT130 $99.95 $13.95BOBCAT152 $34.95BOBCAT160 $28.95BOBCAT176 $36.95
10
Den
tal L
ab
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
BOBCATFor Ceramic
Part #
Part #
Part #
Part #BOBCAT | M BOBCAT128 BOBCAT168 BOBCAT156
Grit medium
| Sizes [mm] Ø 26 x 2 Ø 17 x 2.6 Ø 22 x 3.2
| Shank 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
BOBCAT | M BOBCAT108 BOBCAT136 BOBCAT180
Grit medium
| Sizes [mm] Ø 5.5 x 18 Ø 11.5 x 2.4 Ø 22 x 3.5
| Shank 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
BOBCAT | F BOBCAT126 BOBCAT164 BOBCAT154Grit fine
| Sizes [mm] Ø 26 x 2 Ø 17 x 2.6 Ø 22 x 3.2
| Shank 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
BOBCAT | F BOBCAT104 BOBCAT132 BOBCAT178
Grit fine
| Sizes [mm] Ø 5.5 x 18 Ø 11.5 x 2.4 Ø 22 x 3.5
| Shank 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
Part# 10 Pack $ Single $BOBCAT104 $149.95 $16.95BOBCAT126 $32.95BOBCAT132 $99.95 $13.95BOBCAT154 $34.95BOBCAT164 $28.95BOBCAT178 $36.95
Part# 10 Pack $ Single $BOBCAT108 $149.95 $16.95BOBCAT128 $32.95BOBCAT136 $99.95 $13.95BOBCAT156 $34.95BOBCAT168 $28.95BOBCAT180 $36.95
11
Den
tal L
ab
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
5 Our Economical Line 5 Ideal for transition of metal and ceramic 5 Economical series without diamond 5 Silicium carbide 5 Soft and comforable bonding material
JAGUAR | M JAGUAR118 JAGUAR102 JAGUAR128 JAGUAR124
Grit medium
| Sizes [mm] Ø 22 x 3.5 Ø 22 x 3.2 Ø 6 x 25 Ø 7 x 20
| Shank 900 900 900 900
optimal / maximum rpm 10,000 / 20,000 10,000 / 20,000 10,000 / 20,000 10,000 / 20,000
| Mandrels A / B A / B F F
| matching mandrels please see page 22
JAGUAR116 JAGUAR100 JAGUAR126 JAGUAR122
Grit fine
Sizes [mm] Ø 22 x 3.5 Ø 22 x 3.2 Ø 6 x 25 Ø 7 x 20
| Shank 900 900 900 900
optimal / maximum rpm 10,000 / 20,000 10,000 / 20,000 10,000 / 20,000 10,000 / 20,000
| Mandrels A / B A / B F F
| matching mandrels please see page 22
JAGUAR | F
JAGUAR120 JAGUAR104
Grit extra fine
| Sizes [mm] Ø 22 x 3.5 Ø 22 x 3.2
| Shank 900 900
optimal / maximum rpm 10,000 / 20,000 10,000 / 20,000
| Mandrels A / B A / B
| matching mandrels please see page 22
JAGUAR | XF
For Ceramic
JAGUAR
Part #
Part #
Part # Part# 100 Pack $ 10 Pack $JAGUAR100 $64.95 $8.95JAGUAR102 $64.95 $8.95JAGUAR104 $64.95 $8.95JAGUAR116 $64.95 $8.95JAGUAR118 $64.95 $8.95JAGUAR120 $64.95 $8.95JAGUAR122 $64.95 $8.95JAGUAR124 $64.95 $8.95JAGUAR126 $64.95 $8.95JAGUAR128 $64.95 $8.95
12
labo
rD
enta
l Lab
For Peek
LEOPARDZi
rcon
ia s
inte
red
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
Peek
5 Two-step system for finishing PEEK 5 Finishing of sprue attachments on millings 5 High-gloss polishing of CAD/CAM restorations 5 Smooth surfaces and a perfect high-gloss luster
on all pressed workpieces
LEOPARD100 LEOPARD108 LEOPARD104
Grit fine
| Sizes [mm] Ø 5 x 16 Ø 22 x 4 Ø 22 x 3.2
| Shank 104-HP 104-HP 104-HP
optimal / maximum rpm 8,000 / 20,000 8,000 / 20,000 8,000 / 20,000
| Sizes [mm] Ø 5 x 16 Ø 22 x 4 Ø 22 x 3.2
| Shank 104-HP 104-HP 104-HP
optimal / maximum rpm 8,000 / 20,000 8,000 / 20,000 8,000 / 20,000
LEOPARD | F
LEOPARD102 LEOPARD110 LEOPARD106
Grit extra fine
LEOPARD | XF
Part #
Part #
Part# 10 Pack $LEOPARD100 $24.95LEOPARD102 $24.95LEOPARD104 $44.95LEOPARD106 $44.95LEOPARD108 $44.95LEOPARD110 $44.95
13
Den
tal L
ab
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
5 Specially developed for veneering composites 5 New extra thin disc 5 2-step polishing system with diamond 5 Extremly fast polishing results
DESERT CAT | M
DESERT CAT | F
DESERTCAT102
DESERTCAT100
DESERTCAT106
DESERTCAT104
DESERTCAT110
DESERTCAT108
Sizes [mm] Ø 5.5 x 16 Ø 15 Ø 15 x 2.3
| Shank 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
| Sizes [mm] Ø 5.5 x 16 Ø 15 Ø 15 x 2.3
| Shank 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
Grit medium
Grit fine
DESERT CATFor Composite
Part #
Part #
Part# 10 Pack $ Single $DESERTCAT100 $129.95 $14.95DESERTCAT102 $129.95 $14.95DESERTCAT104 $129.95 $14.95DESERTCAT106 $129.95 $14.95DESERTCAT108 $149.95 $16.95DESERTCAT110 $149.95 $16.95
14
Den
tal L
ab
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
5 Our Economical Line without Diamond 5 Smoothing with slight shine 5 Smooth binding material 5 Over 1 Million units sold
LYNX | M LYNX102 LYNX104 LYNX106 LYNX108
Grit medium
| Sizes [mm] Ø 22 x 3.2 Ø 17 x 2.7 Ø 22 x 3.5 Ø 15 x 2.5
| Shank 900 900 900 900
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
| Mandrels A / B A / B A / B A / B
| matching mandrels please see page 22
LYNX110 LYNX112
| Sizes [mm] Ø 7 x 20 Ø 6 x 25
| Shank 900 900
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000
| Mandrels F F
| matching mandrels please see page 22
For Universal
LYNX
Part #
Part# 100 Pack $ 10 Pack $LYNX102 $69.95 $9.95LYNX104 $69.95 $9.95LYNX106 $69.95 $9.95LYNX108 $69.95 $9.95LYNX110 $64.95 $8.95LYNX112 $64.95 $8.95
15
Den
tal L
ab
COUGAR | C COUGAR124 COUGAR132 COUGAR142
Grit coarse
Sizes [mm] Ø 22 x 3.2 Ø 17 x 2.7 Ø 22 x 1
| Shank 900 900 900
optimal / maximum rpm 8,000 / 20,000 8,000 / 20,000 6,000 / 20,000
| Mandrels A / B A / B A / B
| matching mandrels please see page 22
| Sizes [mm] Ø 22 x 4 Ø 18 x 3 Ø 6 x 25
| Shank 900 900 900
optimal / maximum rpm 8,000 / 20,000 8,000 / 20,000 6,000 / 20,000
| Mandrels A / B A / B F
| matching mandrels please see page 22
| Sizes [mm] Ø 5 x 16 Ø 15 Ø 15 x 2.5
| Shank 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 8,000 / 20,000 8,000 / 20,000
COUGAR150 COUGAR158 COUGAR174
COUGAR108 COUGAR116 COUGAR100
Part #
5 Our Economical Line with Silicium-Carbide 5 Universal use on all dental materials 5 Designed for aggressive removal of dental materials 5 Over 1 Million units sold globally
COUGAR
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
For Universal
Part# 100 Pack $ 10 Pack $COUGAR100 $19.95COUGAR108 $19.95COUGAR116 $19.95COUGAR124 $64.95 $8.95COUGAR132 $64.95 $8.95COUGAR142 $64.95 $8.95COUGAR150 $64.95 $8.95COUGAR158 $64.95 $8.95COUGAR174 $64.95 $8.95
16
Den
tal L
ab
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
OCELOT | C OCELOT100 OCELOT108
Grit coarse
| Sizes [mm] Ø 10 x 20.5 Ø 10 x 24 Ø 15 x 18
| Shank 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
OCELOT104
OCELOT | M OCELOT102 OCELOT110
Grit medium
| Sizes [mm] Ø 10 x 20.5 Ø 10 x 24 Ø 15 x 18
| Shank 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
OCELOT106
5 High-grit concentration 5 For removal and smoothing 5 Wear-resistant
Part #
Part #
For Denture Acrylic
OCELOT
5 Impregnated abrasive pad 5 Extremely soft 5 Efficiently applicable on many different surfaces 5 Generates coarse to fine grinding pattern
PUMA | M XF UF PUMA100 PUMA104 PUMA102
| Grit M XF UF
| Sizes [mm] Ø 26 Ø 26 Ø 26
| Shank 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
Grit medium extra fine ultra fine
Part #
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
PUMAFor Denture Acrylic
Part# 10 Pack $OCELOT100 $34.95OCELOT102 $34.95OCELOT104 $34.95OCELOT106 $34.95OCELOT108 $38.95OCELOT110 $38.95
Part# 10 Pack $PUMA100 $29.95PUMA102 $29.95PUMA104 $29.95
17
Den
tal L
ab
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
5 From removal to high-gloss 5 Over 1 Million units sold 5 Smooth silicone binding material
CHEETAH | F CHEETAH114 CHEETAH102 CHEETAH120 CHEETAH132 CHEETAH156 CHEETAH144
Grit fine
| Sizes [mm] Ø 5.5 x 16 Ø 10 x 20.5 Ø 12 x 22.5 Ø 10 x 24 Ø 7.8 x 20.5 Ø 15 x 18
| Shank 104-HP 104-HP 104-HP 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
CHEETAH | C CHEETAH112 CHEETAH100 CHEETAH118 CHEETAH130 CHEETAH154 CHEETAH142
Grit coarse
| Sizes [mm] Ø 5.5 x 16 Ø 10 x 20.5 Ø 12 x 22.5 10 x 24 Ø 7.8 x 20.5 Ø 15 x 18
| Shank 104-HP 104-HP 104-HP 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
CHEETAH | M CHEETAH116 CHEETAH104 CHEETAH122 CHEETAH134 CHEETAH158 CHEETAH146
Grit medium
| Sizes [mm] Ø 5.5 x 16 Ø 10 x 20.5 Ø 12 x 22.5 Ø 10 x 24 Ø 7.8 x 20.5 Ø 15 x 18
| Shank 104-HP 104-HP 104-HP 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
For Denture Acrylic
CHEETAH
Part #
Part #
Part #
Part# 10 Pack $CHEETAH100 $29.95CHEETAH102 $29.95CHEETAH104 $29.95CHEETAH112 $24.95CHEETAH114 $24.95CHEETAH116 $24.95CHEETAH118 $29.95CHEETAH120 $29.95CHEETAH122 $29.95
Part# 10 Pack $CHEETAH130 $29.95CHEETAH132 $29.95CHEETAH134 $29.95CHEETAH142 $29.95CHEETAH144 $29.95CHEETAH146 $29.95CHEETAH154 $29.95CHEETAH156 $29.95CHEETAH158 $29.95
18
labo
rD
enta
l Lab
For Metals
TIGER
5 Removal and smoothing of non-precious alloys 5 Wear-resistant hard binding material
TIGER | C TIGER118 TIGER106 TIGER114 TIGER110
Grit coarse
| Sizes [mm] Ø 7 x 20 Ø 22 x 3.2 Ø 22 x 4 Ø 26 x 1.3
| Shank 900 900 900 900
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
| mandrels F A / B A / B A / B
| matching mandrels please see page 22
TIGER | M TIGER122 TIGER108TIGER124 TIGER116TIGER120
Grit medium
| Sizes [mm] Ø 2 x 20 Ø 3 x 24.5
| Shank 000 000
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000
| mandrels G H
Ø 7 x 20 Ø 22 x 3.2 Ø 22 x 4
900 900 900
6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
F A / B A / B
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
Part #
Part #
Part# 100 Pack $ 10 Pack $TIGER106 $64.95 $8.95TIGER108 $64.95 $8.95TIGER110 $64.95 $8.95TIGER114 $64.95 $8.95TIGER116 $64.95 $8.95TIGER118 $64.95 $8.95TIGER120 $64.95 $8.95TIGER122 $64.95 $8.95TIGER124 $64.95 $8.95
| matching mandrels please see page 22
19
labo
rD
enta
l Lab
| Sizes [mm] Ø 22 x 3.2 Ø 22 x 1.2 Ø 22 x 4 Ø 7 x 20 Ø 2 x 20 Ø 3 x 24.5
| Shank 900 900 900 900 000 000
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
| Mandrels A / B A / B A / B F G H
| matching mandrels please see page 22
LION | M LION142 LION150 LION158 LION166 LION178 LION186
Grit medium
LION102 LION110 LION118 LION126
| Sizes [mm] Ø 5.5 x 18 Ø 5 x 16 Ø 15 Ø 15 x 2.3
| Shank 104-HP 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
LION | C LION138 LION146 LION154 LION174 LION182
Grit coarse
| Sizes [mm] Ø 22 x 3.2 Ø 22 x 1.2 Ø 22 x 4 Ø 7 x 20 Ø 2 x 20 Ø 3 x 24.5
| Shank 900 900 900 900 000 000
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
| Mandrels A / B A / B A / B F G H
| matching mandrels please see page 22
LION98 LION106 LION114 LION122
| Sizes [mm] Ø 5.5 x 18 Ø 5 x 16 Ø 15 Ø 15 x 2.3
| Shank 104-HP 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
LION162
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
LION C + M
5 Wear-resistant bonding material 5 Silicium carbide 5 From removal to mirror finish
For Precious Metals
LION
Part #
Part #
Part #
Part# 100 Pack $ 10 Pack $LION98 $19.95
LION106 $19.95LION114 $21.95LION122 $21.95LION138 $64.95 $8.95LION146 $64.95 $8.95LION154 $64.95 $8.95LION162 $64.95 $8.95LION174 $64.95 $8.95LION182 $64.95 $8.95
Part# 100 Pack $ 10 Pack $LION102 $19.95LION110 $19.95LION118 $21.95LION126 $21.95LION142 $64.95 $8.95LION150 $64.95 $8.95LION158 $64.95 $8.95LION166 $64.95 $8.95LION178 $64.95 $8.95LION186 $64.95 $8.95
20
Den
tal L
ab
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
Den
tal L
ab
LION | F LION140 LION148 LION156 LION164 LION176
Grit fine
LION184
LION100 LION108 LION116 LION124
| Sizes [mm] Ø 5.5 x 18 Ø 5 x 16 Ø 15 Ø 15 x 2.3
Schaft | Shank 104-HP 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
LION | XF LION144 LION152 LION160 LION168 LION180
Grit extra fine
| Sizes [mm] Ø 22 x 3.2 Ø 22 x 1.2 Ø 22 x 4 Ø 7 x 20 Ø 2 x 20 Ø 3 x 24.5
Schaft | Shank 900 900 900 900 000 000
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
| Mandrels A / B A / B A / B F G H
| matching mandrels please see page 22
LION188
LION104 LION112 LION120 LION128
| Sizes [mm] Ø 5.5 x 18 Ø 5 x 16 Ø 15 Ø 15 x 2.3
| Shank 104-HP 104-HP 104-HP 104-HP
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
| Sizes [mm] Ø 22 x 3.2 Ø 22 x 1.2 Ø 22 x 4 Ø 7 x 20 Ø 2 x 20 Ø 3 x 24.5
| Shank 900 900 900 900 000 000
optimal / maximum rpm 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000 6,000 / 20,000
| Mandrels A / B A / B A / B F G H
| matching mandrels please see page 22
Zirc
onia
sin
tere
d
Zirc
onia
un
sin
tere
d
Cer
amic
Com
posi
te
Den
ture
acr
ylic
Non
-pre
ciou
s al
loys
Pre
ciou
s m
etal
s /
Am
alga
m
Tita
nium
LION F + XF
For Precious Metals
LION
Part #
Part #
Part# 100 Pack $ 10 Pack $LION100 $19.95LION108 $19.95LION116 $21.95LION124 $21.95LION140 $64.95 $8.95LION148 $64.95 $8.95LION156 $64.95 $8.95LION164 $64.95 $8.95LION176 $64.95 $8.95LION184 $64.95 $8.95
Part# 100 Pack $ 10 Pack $LION104 $19.95LION112 $19.95LION120 $21.95LION128 $21.95LION144 $64.95 $8.95LION152 $64.95 $8.95LION160 $64.95 $8.95LION168 $64.95 $8.95LION180 $64.95 $8.95LION188 $64.95 $8.95
21
Den
tal L
ab PAMPASCAT102 PAMPASCAT114 PAMPASCAT110 PAMPASCAT112mandrels /pin holder
| Sizes [mm] Ø 5 Ø 5 Ø 8 Ø 5
| Shank 104-HP 104-HP 104-HP 104-HP
maximum rpm 20,000 20,000 20,000 20,000
PAMPASCAT100 PAMPASCAT104 PAMPASCAT106
| Sizes [mm] Ø 2.35 Ø 2 Ø 3
| Shank 104-HP 104-HP 104-HP
maximum rpm 20,000 20,000 20,000
Mandrels and pin holders made of stainless steel for the shown items.
Dressing tools with and without diamond
CARACAL
BLACK FOOTED
Dressing stone without Diamond
CARACAL100
BLACKFOOTED100
| Sizes [mm] 65 x 20 x 4
| Sizes [mm] 23 x 15 x 8 total length 90
A B
F
C
G
D
H
Dressing Tool
Mandrels / Pin Holder
PAMPAS CAT | S
Dressing tool withDiamond
PAMPAS CAT
Part #
Part #
Part #
Part# 10 Pack $ Single $PAMPASCAT100 $25.95 $2.95PAMPASCAT102 $29.95 $3.95PAMPASCAT104 $69.95 $9.95PAMPASCAT106 $69.95 $9.95PAMPASCAT112 $29.95 $3.95PAMPASCAT114 $29.95 $3.95
Part# Single $CARACAL100 $6.95
Part# Single $BLACKFOOTED100 $79.95
22
Utilizing Newly Developed Technology
As dental technology improves, so do rotary instruments. Improved materials, shapes, techniques, and applications demand new instruments. Products are continually developed to increase instrument lifetime, create more efficiency, and lower heat transfer. The Panther line is the latest result of this desire to improve. You will not find a product on the market that creates a better result. As new materials are introduced to the dental technology field, a solution is needed to manipulate these new materials. An example of this progression is the Leopard line which is a new series designed for use on PEEK material.
Instructions for Use
Humans are unique beings. Every Dental Technologist has a unique preference on how to utilize different rotary instruments to fabricate a unique work-of-art. • When a substantial amount of zirconia or lithium disilicate material needs to be removed, use our Jungle Cat line to reduce heat and avoid micro fractures into your restoration.
• When a minor amount of zirconia or lithium disilicate material needs to be removed, use our Panther or Serval lines.
Extending the Lifetime of your Rotary Instruments
Maximize the life span of your rotary instruments by allowing the instrument to do the work. Please follow recommended RPM highlighted under each product. Higher usage speeds will reduce instrument life and increase heat to the restoration.
Guarantee - Try BIG CAT rotary instruments at no risk!
Humans are creatures of habit. Every ceramist has a personal preference for what works for them. Once they find something that works okay, they are hesitant to change. Rotary instruments have improved a great deal over the past few years. As a result, new materials, shapes and techniques provide better results. Trying something new shouldn’t be difficult. If you purchase a BIG CAT product, and do not receive the desired result, simply return the product for a full refund.
INFORMATION
23
Abutment Direct Inc.102-7351 Victoria Park Avenue, Markham, ON Canada L3R 3A5
Toll Free: 1-855-604-0465Fax: (905) 604-0900 [email protected] www.abutmentdirect.com
Exclusively By:
BIG CAT