S 1000 XR HandguardBMW R 1200 / 1250 GS / GSA
Installation Instructions
Installation Instructions
Kit Contents PRN014553-014556
1 x R/H Handguard A
1 x L/H Handguard B
2 x Bar End Outer C
2 x Bar End Middle Spacer D
2 x M10 x 70 SS Caphead E
2 x M5 Washer F
2 x M5 x 25 Black Button Head G
2 x Spacer H
2 x Bar End Inner J
1Installation Instructions
2Installation Instructions
3Installation Instructions
4Installation Instructions
5Installation Instructions
6Installation Instructions
D A C
E
7Installation Instructions
J
8Installation Instructions
9Installation Instructions
10Installation Instructions
Caution
Do Not FullyTighten
E
11Installation Instructions
H
12Installation Instructions
F
G
13Installation Instructions
Caution
FullyTighten
14Installation Instructions
Caution
Fully Tighten30Nm
Installation Instructions
Repeat Stages1 - 14For Left Hand Side
Installation Instructions
It is recommended that periodic inspections are made to ensure that all bolts are tightend to the speci�ed torque settings.
Should the bike be involved in an accident a thorough inspection should be made and any components that have taken an
impact, no matter how small, be replaced
www.evotech-performance.com