Date post: | 29-Mar-2016 |
Category: |
Documents |
Upload: | sally-johnstone |
View: | 216 times |
Download: | 0 times |
2
B E D D I N G
B E D D I N G
BQ DESIGN IS AUSTRALIA’S LEADING MANUFACTURE OF CUSTOM MADE BLINDS, CURTAINS, BEDDING, UPHOLSTERY
AND CUSHIONS.
OUR EXCLUSIVE STATE-OF-THE-ART MACHINERY AND HIGHLY SKILLED CRAFTS PEOPLE CREATE THE HIGHEST QUALITY
PRODUCT TAILORED TO YOUR EXACT SPECIFICATIONS.
BQ DESIGN IS COMMITTED TO EXCELLENCE IN SERVICE AND MANUFACTURING AND PROVIDES A 3 YEAR WARRANTY
FOR REPAIR OR REPLACEMENT SHOULD COMPONENT FAILURE OR A MANUFACTURING FAULT OCCUR.
OUR ON-LINE JOB TRACK SYSTEM ALLOWS YOU TO MONITOR THE PROGRESS OF
YOUR JOB ANY WHERE, ANYTIME. WE ALSO PROVIDE A DELIVERY DATE AT THE
COMMENCEMENT OF EVERY JOB – THAT’S OUR PROMISE.
CONTENTS
BEDHEADS AND WALL PANELS 1
BEDSPREADS – QUILTED THROWOVERS 3
BEDSPREADS – QUILTED CAP TOPS 5
BEDSPREADS – QUILTED, FULLY TAILORED 7
QUILT COVERS 8
THROW RUGS 9
BED VALANCES 10
PILLOW CASES AND CUSHIONS 11
SIZING 12
ESSENTIAL INFORMATION 13
B E D D I N G
1
BEDHEADS
BQ Design offer a range of fully upholstered
bedhead styles and shapes which you can select
from to suit your design needs.
Choose your style then select your required shape.
WALL PANELS
Upholstered Wall Panels are a versatile and
creative touch in home decorating, and can be
used effectively as an alternative to bedheads.
2
Optional Additions
Order Code BH7
Deep diamond buttoned
Order Code BH4
Plain
Single row of piping to edge
Order Code BH3
Padded Roll
Piping inserted below roll
Order Code BH5
Walled
Piped front and back edge
Order Code BH1
Stuckey
Attached to the wall above the bed,
does not go to the floor
Available in Shape 8 only, square
Style Choices
Studs Covered buttons –
20mm diameter
AlternativesBH1 Alternative – Half Projection (55mm)
BH4/BH5 Alternative – No piping
BH5 Alternative – Wrapped effect with no piping or seam along walled edge,
only applicable to Shape 8.
Shape Choices
Shape 1
Square, rounded cornersShape 2
Square, cut-off corners
Shape 3
Square, inverted corners
Shape 7
Georgian
Shape 5
Clover
Shape 8
Square
Bedhead with base cut-out Standard bedhead without base
cut-out
Skirting board cut-outs
Only applicable to Order Code BH5
Shape 4
Oval
Shape 6
Queen Anne
B E D D I N G
3
All quilting designs are interchangeable with bedspread styles.
Quilted bedspreads may be designed to sit to the floor and are available in tailored or rounded corners.
Border Diamond
Frame Quilting
Available only in standard cap
top sizes
Outline Channel
Recommended for all linear
prints
Outline of fabric patternShell
Frame Quilting
– 20cm
Elongated Diamond
Frame Quilting
– 23cm
Tuft Square
Frame Quilting
– 15cm
Straight Diamond
Frame Quilting
– 15cm
Tuft Diamond
Frame Quilting
– 30cm
Square
Frame Quilting
Available in 15cm, 20cm,
25cm and 30cm
Multi-needle Channel
Available in 7.5cm, 10cm,
12.5cm, 15cm, 17.5cm, 20cm
and 22.5cm
Quilting Styles
Unless specified, Reverse Sham (80-85cm) is standard on all BQ Design Bedspreads (refer to images opposite).
Grey
4
Order Code BS10
5cm Blind stitched edges
Pictured: Frame Quilting
– 15cm Straight Diamond
Order Code BS1
8cm Rolled edges
Pictured: Frame Quilting
– 15cm Straight Diamond
Alternative: 7cm self or contrast piping
can be inserted above rolled edges
Order Code BS1A
Order Code BS10 Alternative
Sewn down corners
Pictured: Multi-needle Quilting
– 10cm Channels
Order Code BS7
7mm Self or contrast piped edges
Pictured: Frame Quilting
– 20cm Shell
Order Code BS12
6cm Self or contrast band on edges
Pictured: Frame Quilting
– 25cm Square
Order Code BS8
5cm Blind stitched edges
Pictured: Frame Quilting
– 15cm Square
Alternative: Continuous Sham Alternative: No Sham
B E D D I N G
5
BEDSPREADS
Quilted Cap Tops
All quilting designs are interchangeable with bedspread styles.
Cap Top Bedspreads are designed to fall just below the mattress allowing your valance or bed base to
remain visible.
Unless specified, the following is standard on all BQ Design Cap Top Bedspreads:
Reverse Sham (80-85cm) Rounded corners (All Order Codes except BS17A and BS31)
Alternatives: No Sham and Continuous Sham Square Corners
6
Order Code BS17A
8cm Double sided flanged edges
Pictured: Frame Quilting
– 15cm Straight Diamond
Order Code BS18
5cm Plain sewn edges
Pictured: Frame Quilting
– 20cm Shell
Order Code BS19
5cm Blind stitched edges
Pictured: Frame Quilting
– 15cm Square
Order Code BS19T
Tailored Corners (Can also be applied to Order
Code BS18)
Pictured: Multi-needle Quilting
– 15cm Channels
Order Code BS22
16mm Bound edges
Pictured: Frame Quilting
– 15cm Square
Order Code BS21
7mm Self or contrast piped edges
Pictured: Frame Quilting
– 20cm Shell
B E D D I N G
7
Alternatives No Sham and Continuous Sham
BEDSPREADS
Quilted, Fully Tailored
All quilting designs are interchangeable with bedspread styles.
Quilted, Fully Tailored bedspreads feature a piped bedline.
The bedline can be self or contrast piped, or substituted with a decorative cord.
Unless specified, Reverse Sham (80-85cm) is standard on all BQ Design Bedspreads.
Order Code BS31
Cap Top
Piped bedline, split corners,
5cm Blind stitched edges
Pictured: Frame Quilting – 15cm Square
Order Code BS24
Full bedspread
Piped bedline, split corners,
5cm Blind stitched edges
Pictured: Multi-needle Quilting – 15cm Channels
8
QUILT COVERS
Quilt covers are available in plain or quilted styles and are finished with a zipped opening.
Unless specified, plain edges are standard on all BQ Design quilt covers.
B E D D I N G
9
Order Code BT1
Unquilted, Reversible,
Plain edges
Order Code BT2
Quilted, Reversible,
16mm Bound edges
Pictured: Frame Quilting
– 20cm Square
Order Code BT3
Quilted top, Bag lined underside,
4.5mm Piped edges
Pictured: Outline Quilting
Order Code BT6
Quilted top, Bag lined underside,
7cm Flange on ends
Pictured: Multi-needle Channel Quilting
– 22.5cm
Order Code BT8
Quilted top, Bag lined underside, 10cm
Contrast band on four edges – top only
Pictured: Outline Quilting
Order Code BT7
Quilted top, Bag lined underside,
15cm Contrast band on ends – top only
Pictured: Frame quilting
– 30cm Tuft Diamond
Throw RugsThrow rugs are 65cm wide and are designed to lay across the end of the bed.These can also be made wider to your specifications.
Unless specified, 70 gram polyester filling is standard on all BQ Design Throw Rugs.
Multi-needle Quilting – 22.5cm Channels
10
BED VALANCES
Bed valances are designed as a decorative treatment to conceal your bed base. These are available lined or
unlined and are standard with a 10cm mattress band.
Order Code BV1
Gathered
Order Code BV2
Tailored. Inverted pleat at foot corners,
centre of sides and centre of foot.
Order Code BV2A
Inverted pleats
approx. 30-40cm apart
Order Code BV4
Vertical channel pleated
B E D D I N G
11
PILLOW CASES AND CUSHIONS
Additions including Piped edges, Flanged edges, Bands and Quilting can be applied to pillow cases
and cushions.
12
SIZING
Refer to the following tables for standard sizes.
Custom sizes can be requested.
BEDSPREADS Full Bedspread Cap Top
Style Rolled Edge Style OtherSizes
Bed Width cm Length cm Drop cm Drop cm Drop cm
SB 92 188 56 54 35
KSB 107 203 56 54 35
DB 138 191 56 54 35
QS 153 204 56 54 35
KS 183 204 56 54 35
BEDHEADS
MAXIMUM HEIGHT 150CM
BH1 - Stuckey5.5cm and 10cm Projections available
BH3, 6.5cm projectionBH4, 6cm projectionBH5, 8cm projection
Size Width cm Height cm Width cm Height cm
SB 97 60 110 120
KSB 112 60 127 120
DB 143 60 158 120
QS 158 60 173 120
KS 188 60 203 120
BED VALANCESBed Width cm Length cm Drop cm
SB 92 188 33
KSB 107 203 33
DB 138 191 33
QS 153 204 33
KS 183 204 33
PILLOW CASESSizes Width cm Length cm
Standard 72 48
KS 75 55
European 65 65
THROW RUGSBed Width cm Length cm
SB 152 65
DB 198 65
QS 213 65
KS 243 65
QUILT COVERSBed Width cm Length cm
SB 140 210
DB 180 210
QS 210 210
KS 240 210
Standard Sizes
B E D D I N G
13
ESSENTIAL INFORMATION
Bedheads
Back of BedheadFully upholstered in BQ ivory cotton providing a neat appearance and concealing fabric turnings and piping tails.
Base Cut-outStandard with no cut-out. Optional cut-out applicable to Order Code BH3, 4 and 5 to allow for power points.
Buttons2cm diameter.
Positioning, unless otherwise requested:
First row 20cm down from the top edge
Second row 20cm down from first row
SB 2 buttons across per row, 30cm apart
KSB 4 buttons across per row, 30cm apart
DB 4 buttons across per row, 30cm apart
QS 4 buttons across per row, 30cm apart
KS 5 buttons across per row, 30cm apart
Non standard height – the same will apply, unless otherwise requested.
ConstructionTimber used is Medium Density Fibreboard (MDF). High density foam is covered with 200 gram polyester, providing a soft, padded effect.
InterliningRecommended for silks and lightweight fabrics. This process avoids discolouration of fabrics. The ivory cotton lining behind gives a truer colour and reduces darkening at the seams when fabric cannot be railroaded.
Mounting BracketOrder Codes BH3, 4 and 5 are designed to be set on the floor or mounted above the skirting. A mounting bracket is supplied for the bedhead to be attached to the wall.
Order Code BH1 is designed to be mounted on the wall so that the base of the bedhead is level with the top of the mattress. The mounting bracket is inset into the back of the framework so the bedhead sits flush with the wall.
Railroading FabricWhen fabric is non-directional, we recommend turning the fabric to avoid seams. Even where grain direction is visible, we believe the product is more pleasant to the eye when seams are avoided.
Roll Sizes90mm or 125mm. 90mm is used on single bed size and 125mm on all other sizes unless otherwise requested.
ScotchgardTM Protector (“Scotchgard” is a trademark of the 3M Company) Repels spills and stains to keep furnishing items clean and looking new for longer.
ShapesAre a guideline – we can manufacture different shapes to templates provided.
StudsSuggested for added interest on rolled edge style Order Code BH3 and applied at the join of the roll to the centre insert (in lieu of piping). Studs are also applied to the edges of BH4 and BH5 syles. BQ Design stock some finishes, otherwise studs can be coupled with fabric.
Bedhead with base cut-out
Bedhead Wall
Mounting bracket for attachment to wall(side view) – not to scale
14
LiningPre-shrunk ivory cotton.
Quilting DesignsFrame Quilting – Fabric is joined prior to quilting, thus providing perfect pattern match and quilt match, however, joins will be exposed. Due to restrictions on the size of the frame, some king size styles cannot be accommodated – we suggest multi-needle channel quilting. Frame Quilting designs in this catalogue are those which we currently have set up on our machine. We would welcome other designs with consideration to adding these to our standard range.
Multi-needle Channel Quilting – Fabric is quilted prior to joining. Joins will occur in a channel stitch concealing the join, however we are unable to obtain perfect pattern match on printed designs. We request that you simply specify narrow channels (7.5, 10 or 12.5cm) or wide channels (15, 17.5, 20 or 22.5cm) and BQ Design will choose the most appropriate width to suit the horizontal pattern repeat. Channel quilting is not suitable for linear patterns as quilting cannot follow on the stripe. We recommend Outline Quilting of plaids, checks and stripes, or alternatively, Frame Quilting. Thread colour – black or natural; BQ Design will select the most suitable.
Outline Quilting – Outline florals (traces the design on patterned florals – suitable for continuous stitching patterns only), plaids and checks. Outline Channels – recommended for striped fabrics. All outline quilting threads are colour matched to background colour.
Reverse Sham80-85cm length is standard. BQ Design recommends 100cm for double pillows.
Split CornersTo accommodate bed ends. Can be applied to throwover styles, whereby splits are concealed within the bell corners or tailored corner styles. These have several options: Split flaps, short flaps or no flaps/partly sewn down (to bracket connection point). See also “How to Measure”.
BedspreadsAll bedspread styles are interchangeable with quilting designs. Unquilted bedspreads are not recommended as they are prone to creasing and do not retain their shape after laundering. We suggest using bumph or 70 gram filling with a wide channel quilting e.g. 22.5cm, which gives a semi-quilted effect.
Filling100 gram is standard.
70 gram is recommended if lightweight option is required.
150 gram gives a lusher, puffier effect, but consideration should be given to the extra weight of the bedspread.
Bumph filling provides a soft, flat, unquilted look.Multi-Needle Quilting Machine
Frame Quilting Machine
Outline Quilting Machine
Wall Panels
Mounting Brackets Inset into the back of the framework so the wall panel sits flush with the wall. Covered with 200 gram polyester filling and fully upholstered, these slimline wall panels are lightweight and an effective alternative to bedheads or a stand-alone option.
ScotchgardTM Protector (“Scotchgard” is a trademark of the 3M Company)Repels spills and stains to keep furnishing items clean and looking new for longer.
B E D D I N G
15
Bedspread
1. Place pin on each side edge. Measure pin to pin = width
2. Place pin at head and foot. Measure pin to pin = length.
3. Measure pin 1 to floor = drop. Rolled edge style: add approx. 4cm to
drop measurement if roll is required to lay on floor
Cap
1. Step 1 and 2 as for bedspread.
3. Measure pin 1 to lower edge of mattress.
Add min. 10cm/max. 15cm to measurement i.e. mattress thickness plus
10cm/15cm = cap drop. (Cap should hang at least half way down the side
of the bed.)
Bed Valances
1. Step 1 and 2 as for bedspread.
3. Measure top edge of base to floor = valance drop.
Split Corners
If split corners are required for bed posts, measurements required:
1. Between brackets at attachment point.
2. Floor up to bracket.
N.B. For rolled edge style: if extra has been added for roll to lay on floor,
this allowance must be added to measurement 2
HOW TO MEASURE
1. Distance between splits
2. Distance up from floor
We invite you to visit BQ Design’s large, modern showroom to see the full range of products on display.
Alternatively, give one of our expert customer service staff a call and let them help advise you on your next stunning bedroom design.
Freecall 1800 335 361
Leaders in custom made soft furnishings