Brady Heatshrinklabel

8/16/2019 Brady Heatshrinklabel

1/17

BradyID.com

INDUSTRIAL, ELECTRONIC & ELECTRICAL

IDENTIFICATION

High-performance solutions for

Industrial ID, Wire & Cable ID,

Product ID and more.


2/17184

BradyID.com

IP Series, PR Plus & BBP72 Print Ribbons on page 134.

Full Material Properties on page 227.

PermaSleeve® Wire Marking Sleeves

THTLb lM

t

il

P

S l

Wi

M

k

B-342 PermaSleeve ® PS Polyolefin Wire Marking Sleeves

B-342 PermaSleeve® PS Polyolefin Wire Marking Sleeves are a 3:1 heat shrinkablewire marking sleeve that fits snugly around wires for identification and protection.

These fade-resistant and flame retardant sleeves have an operating temperature of-67°F to +275°F (-55°C to +130°C).

Meet these industry specifications:

• SAE-AMS-DTL-23053/5C (Class 1)

• SAE-AS-81531

• MIL-STD-202

• RoHS Compliant

• UL Recognized

Tested per:

• ASTM E162

• ASTM E662

Step 1: Choose Product Type

PS = Single Sided Printing, B-342

3PS = Double Sided Printing, B-342

Step 3: Choose Sleeve Width

150 = 11 ⁄ 2" 2 = 2"

Step 5 (optional): Choose Roll Size

Note: If small size is desired, indicate by inserting "S" into Roll Size blank.

If sleeve diameter is 094–250:Standard = 2,500 Small ("S") = 500

If sleeve diameter is 375:Standard = 1,000 Small ("S") = 250

If sleeve diameter is 500:Standard = 500 Small ("S") = 250

If sleeve diameter is 750–1500:Standard=250 Small ("S") = 100

Step 6 (optional): Choose Pieces Per Sleeve

While 1 marker per sleeve is standard, if desired, the sleeve can be split into multiple pieces.Insert number of pieces into “Pieces” blank.Example: PS-094-150-WT-2 This “2” means that this 1.500” sleeve is slit into two 0.750” pieces

Available options: 2, 3, or 4 pieces.

Available options for B-342 PermaSleeve ® PS Wire Marking Sleeves:

Permasleeve Catalog Numbers:Follow the steps below to assemble the B-342 PermaSleeve® PS Wire Marking Sleeve catalog numberthat meets your needs or view all available catalog number on the following pages.

Recommended Ribbon Series: R4300, R6600,

R6700 (with black sleeves) Series

Recommended Printer Series: Bradyprinter™ PR Plus Printer,

Brady IP™ Printer, BBP®72 Double Sided Printer

Software Compatibility: LabelMark™ Labeling Software,

CodeSoft™ 9 Labeling Software

Step 2: Choose Diameter

094 = 3 ⁄ 32" size fits wire diameter 0.023" - 0.080" and approx. wire gauge 28 to 20




375 =

3

⁄ 8" size fits wire diameter 0.125" - 0.320" and approx. wire gauge 12 to 4500 = 1 ⁄ 2" size fits wire diameter 0.187" - 0.450" and approx. wire gauge 8 to 1

750 = 3 ⁄ 4" size fits wire diameter 0.250" - 0.700" and approx. wire gauge 6 to 4/0

1000 = 1" size fits wire diameter 0.333" - 0.950" and approx. wire gauge 2 to 0.950 dia.

1500 = 11 ⁄ 2" size fits wire diameter 0.500" - 1.400", wire gauge not applicable

Create your own:

Product Diameter Width Color RollSize

Pieces

- - - - -

Example catalog number:

ProductDiameter Width Color Roll

SizePieces

3PS - 187 - 2 - WT - S - 4

Optional

Step 4: Choose Your Color

Note: White is standard. All other colors are custom order.

BK = BlackBL = BlueBR = Brown

GR = GreenGY = GrayOR = Orange

PK = PinkRD = RedVT = Violet

WT = WhiteYL = Yellow

Performance Attributes:


3/17181-888-272-3946 BradyID.com

BradyID.com

IP Series, PR Plus & BBP72 Print Ribbons on page 134



B-342 PermaSleeve ® Single-Sided Polyolefin Wire Marking Sleeves:

Use the table below to browse all available single-sided printing, 1.5” width B-342 PermaSleeve® PS PolyolefinWire Marking Sleeves or build your own catalog number on page 184.

Single-Sided Printable, 1.5” Sleeve Width

Catalog # ColorSleevesPer Roll

Approx.WireGauge

Range of Wire DiameterInch (mm)Min. Max.

SuppliedDiameterInch (mm)

RecoveredDiameterInch (mm)

Recovered WallThicknessInch (mm)

Sleeve WidthInch (mm) Rec. Printer Rec. Ribbon

PS-094-150-WT White 2,500 28 to 20 0.023 (0.6) - 0.080 (2.0) 0.094 (2.4) 0.024 (0.6) .024 (0.6) ± .003 (0.07) 1.500 (38.1) PR Plus, IP R4300/ R6602

PS-094-150-WT-** White 2,500 28 to 20 0.023 (0.6) - 0.080 (2.0) 0.094 (2.4) 0.024 (0.6) .024 (0.6) ± .003 (0.07) -- PR Plus, IP R4300/ R6602

PS-094-150-WT-S White 500 28 to 20 0.023 (0.6) - 0.080 (2.0) 0.094 (2.4) 0.024 (0.6) .024 (0.6) ± .003 (0.07) 1.500 (38.1) PR Plus, IP R4300/ R6602

PS-094-150-WT-S-** White 500 28 to 20 0.023 (0.6) - 0.080 (2.0) 0.094 (2.4) 0.024 (0.6) .024 (0.6) ± .003 (0.07) -- PR Plus, IP R4300/ R6602

















PS-500-150-WT White 500 8 to 1 0.187 (4.8) - 0.450 (11.4) 0.500 (12.7) 0.187 (4.7) .025 (0.6) ± .003 (0.07) 1.500 (38.1) PR Plus, IP R4300/ R6602

PS-500-150-WT-** White 500 8 to 1 0.187 (4.8) - 0.450 (11.4) 0.500 (12.7) 0.187 (4.7) .025 (0.6) ± .003 (0.07) -- PR Plus, IP R4300/ R6602



VT = VioletPK = PinkOR = OrangeGY = GrayBR = BrownBL = BlueBK = BlackYL = YellowWT = White RD = RedGR = Green

** Choosing Your PermaSleeve Pieces (optional):

While 1 or 2 markers per sleeve is standard, you may also choose to have each sleeve slitmultiple times to produce multiple pieces. Simply replace the double asterisks (**) in thecatalog number to fill in your desired pieces per marker.

Example: PS-187-150-WT-S- ** becomes PS-187-150-WT-S- 4 This “4” means that this 2.000” sleeve is slit into four 0.500” pieces.

Standard Options:1 or 2 markers per sleeve

Other Available Slit Options:3 or 4 markers per sleeve(Contact Brady Customer Service for availability)

*Choosing Your PermaSleeve Color

While white is a standard color, additional colored sleeves are available as custom order aswell. Simply replace “WT” with the abbreviation of the desired color to order.

Example: PS-094-150- WT -S becomes PS-094-150- RD -S

Available Colors: (Contact Brady Customer Service for availability)

WT = WhiteBK = BlackBL = Blue

BR = BrownGR = GreenGY = Gray

OR = OrangePK = PinkRD = Red

VT = VioletYL = Yellow


4/17186

BradyID.com




THTLb lM

t

il

P

S l

Wi

M

k

B-342 PermaSleeve ® Single-Sided Polyolefin Wire Marking Sleeves:Use the table below to browse all available single-sided printing, 2” width B-342 PermaSleeve® PS PolyolefinWire Marking Sleeves or build your own catalog number on page 184.

Catalog # Color

Sleeves

PerRoll

Approx.

WireGauge

Range of Wire Diameter

Inch (mm)Min. Max.

Supplied

DiameterInch (mm)

Recovered

DiameterInch (mm)

Recovered Wall

ThicknessInch (mm)

Sleeve WidthInch (mm) Rec. Pr inter Rec. Ribbon




PS-094-2-WT-S-** White 2,500 28 to 20 0.023 (0.6) - 0.080 (2.0) 0.094 (2.4) 0.024 (0.6) .024 (0.6) ± .003 (0.07) -- PR Plus, IP R4300/ R6602









PS-250-2-WT White 2,500 16 to 8 0.094 (2.4) - 0.215 (5.5) 0.250 (6.4) 0.093 (2.4) .025 (0.6) ± .003 (0.07) 2.000 (50.8) PR Plus, IP R4300/ R6602PS-250-2-WT-** White 2,500 16 to 8 0.094 (2.4) - 0.215 (5.5) 0.250 (6.4) 0.093 (2.4) .025 (0.6) ± .003 (0.07) -- PR Plus, IP R4300/ R6602







PS-500-2-WT White 500 8 to 1 0.187 (4.8) - 0.450 (11.4) 0.500 (12.7) 0.187 (4.7) .025 (0.6) ± .003 (0.07) 2.000 (50.8) PR Plus, IP R4300/ R6602

PS-500-2-WT-** White 500 8 to 1 0.187 (4.8) - 0.450 (11.4) 0.500 (12.7) 0.187 (4.7) .025 (0.6) ± .003 (0.07) -- PR Plus, IP R4300/ R6602



PS-750-2-WT White 250 6 to 4/0 0.250 (6.6) - 0.700 (17.8) 0.750 (19.0) 0.250 (6.4) .025 (0.6) ± .003 (0.07) 2.000 (50.8) PR Plus, IP R4300/ R6602

PS-750-2-WT-** White 250 6 to 4/0 0.250 (6.6) - 0.700 (17.8) 0.750 (19.0) 0.250 (6.4) .025 (0.6) ± .003 (0.07) -- PR Plus, IP R4300/ R6602PS-750-2-WT-S White 100 6 to 4/0 0.250 (6.6) - 0.700 (17.8) 0.750 (19.0) 0.250 (6.4) .025 (0.6) ± .003 (0.07) 2.000 (50.8) PR Plus, IP R4300/ R6602

PS-750-2-WT-S-** White 100 6 to 4/0 0.250 (6.6) - 0.700 (17.8) 0.750 (19.0) 0.250 (6.4) .025 (0.6) ± .003 (0.07) -- PR Plus, IP R4300/ R6602

PS-1000-2-WT White 250 2 to 0.950 dia. 0.333 (8.5) - 0.950 (24.1) 1.000 (25.4) 0.375 (9.5) .036 (0.9) ± .003 (0.07) 2.000 (50.8) PR Plus, IP R4300/ R6602

PS-1000-2-WT-** White 250 2 to 0.950 dia. 0.333 (8.5) - 0.950 (24.1) 1.000 (25.4) 0.375 (9.5) .036 (0.9) ± .003 (0.07) -- PR Plus, IP R4300/ R6602

PS-1000-2-WT-S White 100 2 to 0.950 dia. 0.333 (8.5) - 0.950 (24.1) 1.000 (25.4) 0.375 (9.5) .036 (0.9) ± .003 (0.07) 2.000 (50.8) PR Plus, IP R4300/ R6602

PS-1000-2-WT-S-** White 100 2 to 0.950 dia. 0.333 (8.5) - 0.950 (24.1) 1.000 (25.4) 0.375 (9.5) .036 (0.9) ± .003 (0.07) -- PR Plus, IP R4300/ R6602

PS-1500-2-WT White 250 N/A 0.500 (12.7) - 1.400 (35.6) 1.500 (38.1) 0.500 (12.7) .036 (0.9) ± .003 (0.07) 2.000 (50.8) PR Plus, IP R4300/ R6602

PS-1500-2-WT-** White 250 N/A 0.500 (12.7) - 1.400 (35.6) 1.500 (38.1) 0.500 (12.7) .036 (0.9) ± .003 (0.07) -- PR Plus, IP R4300/ R6602

PS-1500-2-WT-S White 100 N/A 0.500 (12.7) - 1.400 (35.6) 1.500 (38.1) 0.500 (12.7) .036 (0.9) ± .003 (0.07) 2.000 (50.8) PR Plus, IP R4300/ R6602

PS-1500-2-WT-S-** White 100 N/A 0.500 (12.7) - 1.400 (35.6) 1.500 (38.1) 0.500 (12.7) .036 (0.9) ± .003 (0.07) -- PR Plus, IP R4300/ R6602

Single-Sided Printable, 2” Sleeve Width
















5/17181-888-272-3946 BradyID.com

BradyID.com




B-342 PermaSleeve ® Double-Sided Polyolefin Wire Marking Sleeves:Use the table below to browse all available double-sided printing, 2” width B-342 PermaSleeve® 3PS PolyolefinWire Marking Sleeves or build your own catalog number on page 184.

Catalog # Color

Sleeves

PerRoll

Approx.

WireGauge

Range of Wire Diameter

Inch (mm)Min. Max.

Supplied

DiameterInch (mm)

Recovered

DiameterInch (mm)

Recovered Wall

ThicknessInch (mm)

Sleeve

WidthInch (mm) Rec. Printer Rec. Ribbon

3PS-094-2-WT White 2,500 28 to 20 0.023 (0.6) - 0.080 (2.0) 0.094 (2.4) 0.024 (0.6) .024 (0.6) ± .003 (0.07) 2.000 (50.8) PR Plus, BBP72, IP R4300/ R6602

3PS-094-2-WT-** White 2,500 28 to 20 0.023 (0.6) - 0.080 (2.0) 0.094 (2.4) 0.024 (0.6) .024 (0.6) ± .003 (0.07) -- PR Plus, BBP72, IP R4300/ R6602

3PS-094-2-WT-S White 500 28 to 20 0.023 (0.6) - 0.080 (2.0) 0.094 (2.4) 0.024 (0.6) .024 (0.6) ± .003 (0.07) 2.000 (50.8) PR Plus, BBP72, IP R4300/ R6602

3PS-094-2-WT-S-** White 500 28 to 20 0.023 (0.6) - 0.080 (2.0) 0.094 (2.4) 0.024 (0.6) .024 (0.6) ± .003 (0.07) -- PR Plus, BBP72, IP R4300/ R6602









3PS-250-2-WT White 2,500 16 to 8 0.094 (2.4) - 0.215 (5.5) 0.250 (6.4) 0.093 (2.4) .025 (0.6) ± .003 (0.07) 2.000 (50.8) PR Plus, BBP72, IP R4300/ R66023PS-250-2-WT-** White 5,000 16 to 8 0.094 (2.4) - 0.215 (5.5) 0.250 (6.4) 0.093 (2.4) .025 (0.6) ± .003 (0.07) -- PR Plus, BBP72, IP R4300/ R6602


3PS-250-2-WT-S-** White 1,000 16 to 8 0.094 (2.4) - 0.215 (5.5) 0.250 (6.4) 0.093 (2.4) .025 (0.6) ± .003 (0.07) -- PR Plus, BBP72, IP R4300/ R6602





3PS-500-2-WT White 500 8 to 1 0.187 (4.8) - 0.450 (11.4) 0.500 (12.7) 0.187 (4.7) .025 (0.6) ± .003 (0.07) 2.000 (50.8) PR Plus, BBP72, IP R4300/ R6602

3PS-500-2-WT-** White 500 8 to 1 0.187 (4.8) - 0.450 (11.4) 0.500 (12.7) 0.187 (4.7) .025 (0.6) ± .003 (0.07) -- PR Plus, BBP72, IP R4300/ R6602



3PS-750-2-WT White 250 6 to 4/0 0.250 (6.6) - 0.700 (17.8) 0.750 (19.0) 0.250 (6.4) .025 (0.6) ± .003 (0.07) 2.000 (50.8) PR Plus, BBP72, IP R4300/ R6602

3PS-750-2-WT-** White 250 6 to 4/0 0.250 (6.6) - 0.700 (17.8) 0.750 (19.0) 0.250 (6.4) .025 (0.6) ± .003 (0.07) -- PR Plus, BBP72, IP R4300/ R66023PS-750-2-WT-S White 100 6 to 4/0 0.250 (6.6) - 0.700 (17.8) 0.750 (19.0) 0.250 (6.4) .025 (0.6) ± .003 (0.07) 2.000 (50.8) PR Plus, BBP72, IP R4300/ R6602

3PS-750-2-WT-S-** White 100 6 to 4/0 0.250 (6.6) - 0.700 (17.8) 0.750 (19.0) 0.250 (6.4) .025 (0.6) ± .003 (0.07) -- PR Plus, BBP72, IP R4300/ R6602

3PS-1000-2-WT White 250 2 to 0.950 dia 0.333 (8.5) - 0.950 (24 .1) 1.000 (25.4) 0 .375 (9.5) .036 (0.9) ± .003 (0.07) 2.000 (50.8 ) PR Plus, BBP72, IP R4300/ R6602

3PS-1000-2-WT-** White 250 2 to 0.950 dia. 0.333 (8.5) - 0.950 (24.1) 1.000 (25.4) 0.375 (9.5) .036 (0.9) ± .003 (0.07) -- PR Plus, BBP72, IP R4300/ R6602

3PS-1000-2-WT-S White 100 2 to 0.950 dia. 0.333 (8.5) - 0 .950 (24 .1) 1.000 (25.4) 0.375 (9 .5) .036 (0 .9) ± .003 (0.07) 2.000 (50.8) PR Plus, BBP72 , IP R4300/ R6602

3PS-1000-2-WT-S-** White 100 2 to 0.950 dia. 0.333 (8.5) - 0.950 (24.1) 1.000 (25.4) 0.375 (9.5) .036 (0.9) ± .003 (0.07) -- PR Plus, BBP72, IP R4300/ R6602

3PS-1500-2-WT White 250 N/A 0.500 (12.7) - 1.400 (35.6) 1.500 (38.1) 0.500 (12.7) .036 (0.9) ± .003 (0.07) 2.000 (50.8) PR Plus, BBP72, IP R4300/ R6602

3PS-1500-2-WT-** White 250 N/A 0.500 (12.7) - 1.400 (35.6) 1.500 (38.1) 0.500 (12.7) .036 (0.9) ± .003 (0.07) -- PR Plus, BBP72, IP R4300/ R6602

3PS-1500-2-WT-S White 100 N/A 0.500 (12.7) - 1.400 (35.6) 1.500 (38.1) 0.500 (12.7) .036 (0.9) ± .003 (0.07) 2.000 (50.8) PR Plus, BBP72, IP R4300/ R6602

3PS-1500-2-WT-S-** White 100 N/A 0.500 (12.7) - 1.400 (35.6) 1.500 (38.1) 0.500 (12.7) .036 (0.9) ± .003 (0.07) -- PR Plus, BBP72, IP R4300/ R6602

Double-Sided Printable, 2” Sleeve Width
















6/17188

BradyID.com




THTLb lM

t

il

P

S l

Wi

M

k

Available options for B-345 PermaSleeve ® HT Wire Marking Sleeves:

Permasleeve Catalog Numbers:Follow the steps below to assemble the B-345 PermaSleeve® HT Wire Marking Sleeve catalog numberthat meets your needs or view all available catalog number on the following pages.


Offered in Double Sided Product Format

3HT = 3:1 Shrink Ratio, 3 ⁄ 32” only, B-345

2HT = 2:1 Shrink Ratio, 1 ⁄ 8” through 11 ⁄ 2”, B-345



WT = WhiteBK = Black

BL = BluePK = Pink

YL = Yellow


2 = 2"

Step 5: Choose Roll Size

Note: Small size is standard.

If sleeve diameter is 094–250:Standard Small Size ("S") = 500

If sleeve diameter is 375–500Standard Small Size ("S") = 250

If sleeve diameter is 750–1500:Standard Small Size ("S") = 100


While 1 marker per sleeve is standard, if desired, the sleeve can be split into multiple pieces.Insert number of pieces into “Pieces” blank.Example: 2HT-187-2-WT-S-4 This “4” means this 2.000” sleeve is slit into four 0.500” pieces


Recommended Ribbon Series: R6000, R6600, and

R6800 (with black sleeves) Series


Brady IP™ Printer, BBP®72 Double Sided Printer

Software Compatibility: LabelMark™ Labeling Software,

CodeSoft™ 9 Labeling Software





250 = 1 ⁄ 4" size fits wire diameter 0.125" - 0.215” and approx. wire gauge 12 to 8




1000 = 1" size fits wire diameter 0.450" - 0.950" and approx. wire gauge 2/0 to 0.950 dia.

1500 = 11 ⁄ 2" size fits wire diameter 0.750" - 1.400", and wire gauge not applicable

Product Diameter Width Color Roll

Size

Pieces

- - - - -Create your own:

Product Diameter Width Color Roll

Size

Pieces

Optional*

2HT - 187 - 2 - WT - S - 4

Example catalog number:

B-345 PermaSleeve ® HT High TemperaturePVDF Wire Marking Sleeves

B-345 PermaSleeve® HT High Temperature PVDF Wire Marking Sleeves area 2:1 (3/32” is 3:1) heat shrinkable wire marking sleeve specifically designedfor high temperature and low vacuum outgassing applications. These heat

shrinkable wire marking sleeves are made from irradiated high temperaturePVDF and have an operating temperature of -55°C to +225°C (-67°F to +437°F).

Meet these industry specifications:

• NASA SP-R-0022A Outgassing Performance

• SAE-AS-81531

• MIL-STD-202

• RoHS Compliant

Tested per:

• SAE-AMS-DTL-23053/18, Class 2

• ASTM E162

• ASTM E662



7/17181-888-272-3946 BradyID.com

BradyID.com




B-345 PermaSleeve ® Double-Sided High Temperature PVDF Wire Marking Sleeves:Use the table below to browse all available double-sided printing, 2” width B-345 PermaSleeve® HT High Temperature PVDF WireMarking Sleeves or build your own catalog number on page 188.


Catalog # Color

SleevesPerRoll

Approx.WireGauge





SleeveWidthInch (mm) Rec. Printer Rec. Ribbon

3HT-094-2-WT-S White 500 26 to 20 0.031 (0.8) - 0.080 (2.0) 0.094 (2.4) 0.031 (0.8) 0.015 (0.4) ± 0.003 (0.07) 2.000 (50.8) PR Plus, BBP72, IP R6002/ R6602

3HT-094-2-WT-S-** White 500 26 to 20 0.031 (0.8) - 0.080 (2.0) 0.094 (2.4) 0.031 (0.8) 0.015 (0.4) ± 0.003 (0.07) 2.000 (50.8) PR Plus, BBP72, IP R6002/ R6602










2HT-500-2-WT-S-** White 250 6 to 1 0.250 (6.4) - 0 .450 (11 .4) 0.500 (12.7) 0.250 (6.4) 0.015 (0.4) ± 0.003 (0.07) 2.000 (50.8) PR Plus, BBP72, IP R6002/ R6602

2HT-750-2-WT-S Whi te 100 2 to 4/0 0.375 (9.5) - 0.700 (17 .8) 0.750 (19.0) 0.375 (9.5) 0.015 (0.4 ) ± 0.003 (0.07) 2.000 (50.8) PR Plus, BBP72 , IP R6002/ R6602

2HT-750-2-WT-S-** Whi te 100 2 to 4 /0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.375 (9.5) 0.015 (0.4 ) ± 0.003 (0 .07) 2.000 (50.8 ) PR Plus, BBP72 , IP R6002/ R6602

2HT-1000-2-WT-S White 100 2/0 to 0.950 dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) 0.017 (0.4) ± 0.004 (0.1) 2.000 (50.8) PR Plus, BBP72, IP R6002/ R6602

2HT-1000-2-WT-S-** White 100 2/0 to 0.950 dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) 0.017 (0.4) ± 0.004 (0.1) 2.000 (50.8) PR Plus, BBP72, IP R6002/ R6602

2HT-1500-2-WT-S White 100 N/A 0.750 (19.1) - 1.400 (35.6) 1.500 (38.1) 0.750 (19.1) 0.024 (0.6) ± 0.004 (0.1) 2.000 (50.8) PR Plus, BBP72, IP R6002/ R6602

2HT-1500-2-WT-S-** Whi te 100 N/A 0.750 (19.1 ) - 1.400 (35.6) 1.500 (38 .1) 0 .750 (19 .1 ) 0 .024 (0.6) ± 0 .004 (0.1) 2.000 (50.8) PR P lus , BBP72, IP R6002/ R6602



Example: 2HT-187-2-WT-S- ** becomes 2HT-187-2-WT-S- 4 This “4” means that this 2.000” sleeve is slit into four 0.500” pieces.



YL = Yellow BK = BlackWT = White BL = Blue PK = Pink


While white is a standard color, additional colored sleeves are available as custom parts aswell. Simply replace “WT” with the abbreviation of the desired color to order.

Example: 2HT-094-2- WT -S becomes 2HT-094-2- YL-S



BL = BluePK = Pink

YL = Yellow


8/17190

BradyID.com




THTLb lM

t

il

P

S l

Wi

M

k

B-7641 PermaSleeve ® ZH Low HalogenPolyolefin Wire Marking SleevesB-7641 PermaSleeve® ZH Low Halogen Polyolefin Wire Marking Sleevesare 2:1 heat shrinkable, low halogen wire marking sleeves. The wire markingsleeves offer outstanding fire safety properties and minimal smoke emission.

These low-halogen materials have an operating temperature of -22°F to 221°F(-30°C to 105°C) and meet the following industry specifications:

• SAE-AS-81531

• MIL-STD-202

• RoHS compliant

Tested per:

• ASTM E162

• ASTM E662

Available options for B-7641 PermaSleeve ® ZH Wire Marking Sleeves:

Permasleeve Catalog Numbers:

Follow the steps below to assemble the B-7641 PermaSleeve® ZH Wire Marking Sleeve catalog numberthat meets your needs or view all available catalog number on the following pages.

Create your own:Example catalog number:


ZH = Single Sided Printing, B-7641

2ZH = Double Sided Printing, B-7641


While 1 marker per sleeve is standard, if desired, the sleeve can be split into multiple pieces.Insert number of pieces into “Pieces” blank.Example: 2ZH-187-2-WT-S-4 This “4” means this 2.000” sleeve is slit into four 0.500” pieces










1000 = 1" size fits wire dia. 0.450" - 0.950" and approx. wire gauge 2/0 to 0.950” dia.

1500 = 11 ⁄ 2" size fits wire diameter 0.750" - 1.400" and wire gauge not applicable

2000 = 2" size fits wire diameter 1.000” - 1.900” and wire gauge not applicable


Pieces

2ZH - 187 - 2 - WT - S - 4

Optional*


150 = 11 ⁄ 2" 2 = 2"3 = 3" (only available in 1000,1500, & 2000 diameter parts)


Note: If small size is desired, indicate by inserting "S" into Roll Size blank.

If sleeve diameter is 094–187:Standard = 2,500 Small ("S") = 500

If sleeve diameter is 250-375:Standard = 1,000 Small ("S") = 250


If sleeve diameter is 750–1500:Standard = 250 Small ("S") = 100


Recommended Ribbon Series: R4300, R6400, R6600, 356126 Series


BBP®72 Double Sided Printer

Software Compatibility: LabelMark™ Labeling Software, CodeSoft™ 9 Labeling Software


Standard Colors Special Order Colors

WT = WhiteYL = Yellow

BL = BlueGR = Green

GY = GrayOR = Orange

RD = RedVT = Violet


Pieces

- - - - -



9/17191-888-272-3946 BradyID.com

BradyID.com




B-7641 PermaSleeve ® Single-Sided Low Halogen Polyolefin Wire Marking Sleeves:Use the table below to browse all available single-sided printing, 1.5” width B-7641 PermaSleeve® ZH Low Halogen PolyolefinWire Marking Sleeves or build your own catalog numberon page 190.


Catalog # Color

SleevesPerRoll

Approx.WireGauge

Range of Wire DiameterInch (mm)

Min. Max.




Sleeve WidthInch (mm)

Rec.Pr in ter Rec. Ribbon

ZH-094-150-WT White 2,500 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) .021 (0.5) ± .004 (0.1) 1.500 (38.1) PR Plus R4300/ R6602

ZH-094-150-WT-** White 2,500 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) .021 (0.5) ± .004 (0.1) -- PR Plus R4300/ R6602

ZH-094-150-WT-S White 500 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) .021 (0.5) ± .004 (0.1) 1.500 (38.1) PR Plus R4300/ R6602













ZH-500-150-WT White 500 6 to 1 0.250 (6.4) - 0.450 (11.4) 0.500 (12.7) 0.252 (6.4) .028 (0.7) ± .002 (0.05) 1.500 (38.1) PR Plus R4300/ R6602

ZH-500-150-WT-** White 500 6 to 1 0.250 (6.4) - 0.450 (11.4) 0.500 (12.7) 0.252 (6.4) .028 (0.7) ± .002 (0.05) -- PR Plus R4300/ R6602


ZH-750-150-WT White 250 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.375 (9.5) .031 (0.8) ± .003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602

ZH-750-150-WT-** White 250 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.375 (9.5) .031 (0.8) ± .003 (0.07) -- PR Plus R4300/ R6602

ZH-750-150-WT-S White 100 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.375 (9.5) .031 (0.8) ± .003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602

ZH-1000-150-WT White 250 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) .036 (0.9) ± .003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602

ZH-1000-150-WT-** White 250 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) .036 (0.9) ± .003 (0.07) -- PR Plus R4300/ R6602

ZH-1000-150-WT-S White 100 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) .036 (0.9) ± .003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602

ZH-1500-150-WT White 250 N/A 0.750 (19.0) - 1.400 (35.6) 1.500 (38.1) 0.752 (19.1) .038 (1.0) ± .003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602

ZH-1500-150-WT-S White 100 N/A 0.750 (19.0) - 1.400 (35.6) 1.500 (38.1) 0.752 (19.1) .038 (1.0) ± .003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602

ZH-2000-150-WT White 100 N/A 1.000 (25.4) - 1.900 (48.3) 2.000 (50.8) 1.000 (25.4) .038 (1.0) ± .003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602

ZH-2000-150-WT-S White 50 N/A 1.000 (25.4) - 1.900 (48.3) 2.000 (50.8) 1.000 (25.4) .038 (1.0) ± .003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602


While white and yellow are standard colors, you may special order your sleeves in the colorslisted below. Replace WT or YL with the abbreviation of the desired color.

Example: ZH-094-2- WT -S becomes ZH-094-2- RD -S

Standard Stock Colors:WT = WhiteYL = Yellow

Special Order Colors:(Contact Brady Customer Service for availability)

BK = BlackBL = BlueGR = Green


RD = RedVT = Violet

Note: White and yellow are s tandard stock. All other colors available as special order.



Example: ZH-187-2-WT-S- ** becomes ZH-187-2-WT-S- 4

This “4” means that this 2.000” sleeve is slit into four 0.500” pieces.



BL = BlueBK = BlackYL = YellowWT = White OR = OrangeGY = GrayGR = Green VT = VioletRD = Red


10/17192

BradyID.com




THTLb lM

t

il

P

S l

Wi

M

k

B-7641 PermaSleeve ® Single-Sided Low Halogen Polyolefin Wire Marking Sleeves:

Use the table below to browse all available single-sided printing, 2” width B-7641 PermaSleeve® ZH Low Halogen Polyolefin WireMarking Sleeves or build your own catalog number on page 190.


Catalog # Color

SleevesPerRoll

Approx.WireGauge


Min. Max.





Rec.Printer Rec. R ibbon

LSZH-094-2-WT White 2,500 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) .021 (0.5) ± .004 (0.1) 2.000 (50.8) PR Plus R4300/ R6602

LSZH-094-2-WT-** White 2,500 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) .021 (0.5) ± .004 (0.1) -- PR Plus R4300/ R6602

LSZH-094-2-WT-S White 500 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) .021 (0.5) ± .004 (0.1) 2.000 (50.8) PR Plus R4300/ R6602













LSZH-500-2-WT White 500 6 to 1 0.250 (6.4) - 0.450 (11.4) 0.500 (12.7) 0.252 (6.4) .028 (0.7) ± .002 (0.05) 2.000 (50.8) PR Plus R4300/ R6602

LSZH-500-2-WT-** White 500 6 to 1 0.250 (6.4) - 0.450 (11.4) 0.500 (12.7) 0.252 (6.4) .028 (0.7) ± .002 (0.05) -- PR Plus R4300/ R6602


LSZH-750-2-WT White 250 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.375 (9.5) .031 (0.8) ± .003 (0.07) 2.000 (50.8) PR Plus R4300/ R6602

LSZH-750-2-WT-** White 250 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.375 (9.5) .031 (0.8) ± .003 (0.07) -- PR Plus R4300/ R6602

LSZH-750-2-WT-S White 100 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.375 (9.5) .031 (0.8) ± .003 (0.07) 2.000 (50.8) PR Plus R4300/ R6602

LSZH-1000-2-WT White 250 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) .036 (0.9) ± .003 (0.07) 2.000 (50.8) PR Plus R4300/ R6602

LSZH-1000-2-WT-** White 250 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) .036 (0.9) ± .003 (0.07) -- PR Plus R4300/ R6602

LSZH-1000-2-WT-S White 100 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) .036 (0.9) ± .003 (0.07) 2.000 (50.8) PR Plus R4300/ R6602

LSZH-1500-2-WT White 250 N/A 0.750 (19.0) - 1.400 (35.6) 1.500 (38.1) 0.752 (19.1) .038 (1.0) ± .003 (0.07) 2.000 (50.8) PR Plus R4300/ R6602

LSZH-1500-2-WT-S White 100 N/A 0.750 (19.0) - 1.400 (35.6) 1.500 (38.1) 0.752 (19.1) .038 (1.0) ± .003 (0.07) 2.000 (50.8) PR Plus R4300/ R6602

LSZH-2000-2-WT White 100 N/A 1.000 (25.4) - 1.900 (48.3) 2.000 (50.8) 1.000 (25.4) .038 (1.0) ± .003 (0.07) 2.000 (50.8) PR Plus R4300/ R6602

LSZH-2000-2-WT-S White 50 N/A 1.000 (25.4) - 1.900 (48.3) 2.000 (50.8) 1.000 (25.4) .038 (1.0) ± .003 (0.07) 2.000 (50.8) PR Plus R4300/ R6602


While white and yellow are standard colors, you may special order your sleeves in the colorslisted below. Replace WT or YL with the abbreviation of the desired color.

Example: ZH-094-2- WT -S becomes ZH-094-2- RD -S

Standard Stock Colors:WT = WhiteYL = Yellow

Special Order Colors:(Contact Brady Customer Service for availability)

BK = BlackBL = BlueGR = Green


RD = RedVT = Violet

Note: White and yellow are standard stock. All other colors available as special order.



Example: ZH-187-2-WT-S- ** becomes ZH-187-2-WT-S- 4

This “4” means that this 2.000” sleeve is slit into four 0.500” pieces.





11/17


12/17194

BradyID.com




THTLb lM

t

il

P

S l

Wi

M

k

B-7642 PermaSleeve ® HX PolyolefinWire Marking SleevesB-7642 PermaSleeve® HX Polyolefin Wire Marking Sleeves are2:1 heat shrinkable wire marking sleeves. The sleeves are high-temperature rated, highly flame retardant, and very flexible.

These heat shrinkable wire marking sleeves have an operatingtemperature of -40°F to 248°F (-40°C to 120°C) and meet thefollowing industry specifications:

• SAE-AMS-DTL-23053/5 Class 1 & 3

• SAE-AS-81531

• MIL-STD-202

• RoHS compliant

Tested per:

• ASTM E162

• ASTM E662

Available options for B-7642 PermaSleeve ® HX Wire Marking Sleeve:

Permasleeve Catalog Numbers:Follow the steps below to assemble the B-7642 PermaSleeve® HX Wire Marking Sleeve catalog numberthat meets your needs or view all available catalog number on the following pages.

Create your own:Example catalog number:


HX = Single Sided Printing, B-7642

2HX = Double Sided Printing, B-7642




BL = BlueGR = Green


RD = RedVT = Violet

YL = Yellow


150 = 11 ⁄ 2" 2 = 2"3 = 3" (only available in 1000,1500, & 2000 diameter parts)


Note: If small or jumbo size is desired, indicate by inserting "S" or “J” into Roll Size blank.

If sleeve diameter is 094–187:Standard = 2,500Small ("S") = 500Jumbo (“J”) = 10,000

If sleeve diameter is 250:Standard = 1,000Small (“S” ) = 250Jumbo (“J”) = 7,500

If sleeve diameter is 375:Standard = 1,000Small ("S") = 250Jumbo (“J”) = 2,500

If sleeve diameter is 500:Standard = 500Small (“S”) = 250Jumbo (“J”) = 2,500

If sleeve diameter is 750–1000:Standard = 250Small (“S”) = 100Jumbo (“J”) = 2,500

If sleeve diameter is 1500:Standard = 250Small (“S”) = 100Jumbo (“J”) = 1,000

If sleeve diameter is 2000:Standard = 100Small ("S") = 50Jumbo (“J”) = 1,000


While 1 marker per sleeve is standard, if desired, the sleeve can be split into multiple pieces.Insert number of pieces into “Pieces” blank.Example: 2HX-187-2-WT-S-4 This “4” means this 2.000” sleeve is slit into four 0.500” pieces



Pieces

Optional*

2HX - 187 - 2 - WT - S - 4Product Diameter Width Color Roll

SizePieces

- - - - -

Recommended Ribbon Series: R4300, R6400, R6600, 356126 Series

Recommended Printer Series: Bradyprinter™ PR Plus Printer, BBP®72 Double Sided Printer

Software Compatibility: LabelMark™ Labeling Software, CodeSoft™ 9 Labeling Software







500 =1

⁄ 2" size fits wire diameter 0.250" - 0.450" and approx. wire gauge 6 to 1750 = 3 ⁄ 4" size fits wire diameter 0.375" - 0.700" and approx. wire gauge 2 to 4/0

1000 = 1" size fits wire dia. 0.450" - 0.950" and approx. wire gauge 2/0 to 0.950” dia.

1500 = 11 ⁄ 2" size fits wire diameter 0.750" - 1.400" and wire gauge not applicable

2000 = 2" size fits wire diameter 1.000” - 1.900" and wire gauge not applicable



13/17191-888-272-3946 BradyID.com

BradyID.com




B-7642 PermaSleeve® Single-Sided Polyolefin Wire Marking Sleeves:Use the table below to browse all available single-sided printing, 1.5” width B-7642 PermaSleeve® HX Polyolefin Wire MarkingSleeves or build your own catalog number on page 194.


Catalog # Color

SleevesPerRoll

Approx.WireGauge


Min. Max.





Rec.Printer Rec. Ribbon

HX-094-150-WT White 2,500 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) 0.020 (0.5) ± 0.003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602HX-094-150-WT-** White 2,500 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) 0.020 (0.5) ± 0.003 (0.07) -- PR Plus R4300/ R6602

HX-094-150-WT-S White 500 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) 0.020 (0.5) ± 0.003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602

HX-094-150-WT-J White 10,000 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) 0.020 (0.5) ± 0.003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602

HX-094-150-WT-J-** White 10,000 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) 0.020 (0.5) ± 0.003 (0.07) -- PR Plus R4300/ R6602

HX-125-150-WT White 2,500 20 to 16 0.062 (1.6) - 0.110 (2.8) 0.125 (3.2) 0.063 (1.6) 0.020 (0.5) ± 0.003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602

HX-125-150-WT-** White 2,500 20 to 16 0.062 (1.6) - 0.110 (2.8) 0.125 (3.2) 0.063 (1.6) 0.020 (0.5) ± 0.003 (0.07) -- PR Plus R4300/ R6602



















HX-500-150-WT White 500 6 to 1 0.250 (6.4) - 0.450 (11.4) 0.500 (12.7) 0.252 (6.4) 0.025 (0.6) ± 0.003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602

HX-500-150-WT-** White 500 6 to 1 0.250 (6.4) - 0.450 (11.4) 0.500 (12.7) 0.252 (6.4) 0.025 (0.6) ± 0.003 (0.07) -- PR Plus R4300/ R6602




HX-750-150-WT White 250 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.374 (9.5) 0.030 (0.8) ± 0.003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602

HX-750-150-WT-** White 250 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.374 (9.5) 0.030 (0.8) ± 0.003 (0.07) -- PR Plus R4300/ R6602

HX-750-150-WT-S White 100 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.374 (9.5) 0.030 (0.8) ± 0.003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602

HX-750-150-WT-J White 2,500 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.374 (9.5) 0.030 (0.8) ± 0.003 (0.07) 1.500 (38.1) PR Plus R4300/ R6602

HX-750-150-WT-J-** White 2,500 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.374 (9.5) 0.030 (0.8) ± 0.003 (0.07) -- PR Plus R4300/ R6602

HX-1000-150-WT White 250 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) 0.035 (0.9) ± 0.005 (0.1) 1.500 (38.1) PR Plus R4300/ R6602

HX-1000-150-WT-** White 250 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) 0.035 (0.9) ± 0.005 (0.1) -- PR Plus R4300/ R6602

HX-1000-150-WT-S Whi te 100 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24 .1) 1.000 (25.4) 0 .500 (12.7 ) 0.035 (0.9) ± 0.005 (0.1) 1.500 (38.1) PR Plus R4300/ R6602

HX-1000-150-WT-J Whi te 2,500 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24 .1) 1.000 (25.4) 0 .500 (12.7 ) 0.035 (0.9) ± 0.005 (0.1) 1.500 (38.1) PR Plus R4300/ R6602

HX-1000-150-WT-J-** White 2,500 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) 0.035 (0.9) ± 0.005 (0.1) -- PR Plus R4300/ R6602

HX-1500-150-WT White 250 N/A 0.750 (19.0) - 1.400 (35.6) 1.500 (38.1) 0.752 (19.1) 0.040 (1.0) ± 0.006 (0.2) 1.500 (38.1) PR Plus R4300/ R6602

HX-1500-150-WT-S White 100 N/A 0.750 (19.0) - 1.400 (35.6) 1.500 (38.1) 0.752 (19.1) 0.040 (1.0) ± 0.006 (0.2) 1.500 (38.1) PR Plus R4300/ R6602

HX-1500-150-WT-J White 1,000 N/A 0.750 (19.0) - 1.400 (35.6) 1.500 (38.1) 0.752 (19.1) 0.040 (1.0) ± 0.006 (0.2) 1.500 (38.1) PR Plus R4300/ R6602






Example: HX-187-150-WT- ** becomes HX-187-150-WT- 4 This “4” means that this 2.000” sleeve is slit into four 0 .500” pieces.

Standard Option:1 or 2 markers per sleeve

Other Available Slit Options:3 or 4 markers per sleeve



Example: HX-094-150- WT -4 becomes HX-094-150- RD -4



BL = BlueGR = Green


RD = RedVT = Violet

YL = Yellow


14/17196

BradyID.com




THTLb lM

t

il

P

S l

Wi

M

k

B-7642 PermaSleeve ® Single-Sided Polyolefin Wire Marking Sleeves:Use the table below to browse all available single-sided printing, 2” width B-7642 PermaSleeve® HX Polyolefin Wire MarkingSleeves or build your own catalog number on page 194.


Catalog # Color

SleevesPerRoll

Approx.WireGauge






Rec.Printer Rec. Ribbon


























HX-500-2-WT White 500 6 to 1 0.250 (6.4) - 0.450 (11.4) 0.500 (12.7) 0.252 (6.4) 0.025 (0.6) ± 0.003 (0.07) 2.000 (50.8) PR Plus R4300/ R6602

HX-500-2-WT-** White 500 6 to 1 0.250 (6.4) - 0.450 (11.4) 0.500 (12.7) 0.252 (6.4) 0.025 (0.6) ± 0.003 (0.07) -- PR Plus R4300/ R6602




Single-Sided Printable, 2” Sleeve Width Sleeves continue on next page.


While 1 or 2 markers per sleeve is standard, you may also choose to have each sleeve slitmultiple times to produce multiple pieces. Simply replace the double asterisks (**) in the

catalog number to fill in your desired pieces per marker.Example: HX-187-150-WT- ** becomes HX-187-150-WT- 4 This “4” means that this 2.000” sleeve is slit into four 0.500” pieces.








BL = BlueGR = Green


RD = RedVT = Violet

YL = Yellow



15/17191-888-272-3946 BradyID.com

BradyID.com




Catalog # Color

SleevesPerRoll

Approx.WireGauge


Min. Max.





Rec.Pr in ter Rec. Ribbon

HX-750-2-WT White 250 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.374 (9.5) 0.030 (0.8) ± 0.003 (0.07) 2.000 (50.8) PR Plus R4300/ R6602

HX-750-2-WT-** White 250 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.374 (9.5) 0.030 (0.8) ± 0.003 (0.07) -- PR Plus R4300/ R6602

HX-750-2-WT-S White 100 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.374 (9.5) 0.030 (0.8) ± 0.003 (0.07) 2.000 (50.8) PR Plus R4300/ R6602HX-750-2-WT-J White 2,500 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.374 (9.5) 0.030 (0.8) ± 0.003 (0.07) 2.000 (50.8) PR Plus R4300/ R6602

HX-750-2-WT-J-** White 2,500 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.374 (9.5) 0.030 (0.8) ± 0.003 (0.07) -- PR Plus R4300/ R6602


HX-1000-2-WT-** White 250 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) 0.035 (0.9) ± 0.005 (0.1) -- PR Plus R4300/ R6602

HX-1000-2-WT-S White 100 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) 0.035 (0.9) ± 0.005 (0.1) 2.000 (50.8) PR Plus R4300/ R6602

HX-1000-2-WT-J White 2,500 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) 0.035 (0.9) ± 0.005 (0.1) 2.000 (50.8) PR Plus R4300/ R6602

HX-1000-2-WT-J-** White 2,500 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) 0.035 (0.9) ± 0.005 (0.1) -- PR Plus R4300/ R6602







Single-Sided Printable, 2” Sleeve Width(Continued from previous page.)

Can’t Find The PermaSleeve You Need? Build Your Own Part Number!

Use the “Assemble Your Own PermaSleeve” guideon page 194 to quickly and easily assemble the

right B-7642 PermaSleeve HX Wire Marking Sleevefor your application.

Need additional help? Contact Brady CustomerService at 1-888-272-3946 for more information orto order.

Follow the steps on page 194 to quickly identify:

• Single or Double SidedSleeves

• Wire DiameterRequirements

• Sleeve Width

• Color & Roll Size

• Additional Slits



Example: HX-187-150-WT- ** becomes HX-187-150-WT- 4 This “4” means that this 2.000” sleeve is slit into four 0.500” pieces.








BL = BlueGR = Green


RD = RedVT = Violet

YL = Yellow



16/17198

BradyID.com




THTLb lM

t

il

P

S l

Wi

M

k

B-7642 PermaSleeve ® Double-Sided Polyolefin Wire Marking Sleeves:Use the table below to browse all available double-sided printing, 2” width B-7642 PermaSleeve® 2HX PolyolefinWire Marking Sleeves or build your own catalog number on page 194.


Catalog # Color

SleevesPerRoll

Approx.WireGauge


Min. Max.





2HX-094-2-WT White 2,500 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) 0.020 (0.5) ± 0.003 (0.07) 2.000 (50.8) PR Plus, BBP72 R4300/ R6602

2HX-094-2-WT-** White 2,500 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) 0.020 (0.5) ± 0.003 (0.07) -- PR Plus, BBP72 R4300/ R6602

2HX-094-2-WT-S White 500 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) 0.020 (0.5) ± 0.003 (0.07) 2.000 (50.8) PR Plus, BBP72 R4300/ R6602

2HX-094-2-WT-J White 10,000 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) 0.020 (0.5) ± 0.003 (0.07) 2.000 (50.8) PR Plus, BBP72 R4300/ R6602

2HX-094-2-WT-J-** White 10,000 24 to 20 0.047 (1.2) - 0.080 (2.0) 0.094 (2.4) 0.047 (1.2) 0.020 (0.5) ± 0.003 (0.07) -- PR Plus, BBP72 R4300/ R6602







2HX-187-2-WT-** White 2,500 16 to 10 0.094 (2.4) - 0.151 (3.8) 0.187 (4.8) 0.094 (2.4) 0.020 (0.5) ± 0.003 (0.07) -- PR Plus, BBP72 R4300/ R66022HX-187-2-WT-S White 500 16 to 10 0.094 (2.4) - 0.151 (3.8) 0.187 (4.8) 0.094 (2.4) 0.020 (0.5) ± 0.003 (0.07) 2.000 (50.8) PR Plus, BBP72 R4300/ R6602












2HX-375-2-WT-J-** White 2,500 8 to 4 0.188 (4.8) - 0.320 (8.1) 0.375 (9.5) 0.189 (4.8) 0.025 (0.6) ± 0.003 (0.07) 2.000 (50.8) PR Plus, BBP72 R4300/ R6602

2HX-500-2-WT White 500 6 to 1 0.250 (6.4) - 0.450 (11.4) 0.500 (12.7) 0.252 (6.4) 0.025 (0.6) ± 0.003 (0.07) 2.000 (50.8) PR Plus, BBP72 R4300/ R6602

2HX-500-2-WT-** White 500 6 to 1 0.250 (6.4) - 0.450 (11.4) 0.500 (12.7) 0.252 (6.4) 0.025 (0.6) ± 0.003 (0.07) -- PR Plus, BBP72 R4300/ R6602






While 1 or 2 markers per sleeve is standard, you may also choose to have each sleeve slitmultiple times to produce multiple pieces. Simply replace the double asterisks (**) in the

catalog number to fill in your desired pieces per marker.Example: HX-187-150-WT- ** becomes HX-187-150-WT- 4 This “4” means that this 2.000” sleeve is slit into four 0.500” pieces.








BL = BlueGR = Green


RD = RedVT = Violet

YL = Yellow

Double-Sided Printable, 2” Sleeve Width Sleeves continue on next page.


17/17

BradyID.com

IP S i PR Pl & BBP72 P i t Ribb 134


B-7642 PermaSleeve ® Single-Sided Polyolefin Wire Marking Sleeves:Use the table below to browse all available single-sided printing, 3” width B-7642 PermaSleeve® HX PolyolefinWire Marking Sleeves or build your own catalog number on page 194.

Catalog # ColorSleevesPer Roll

Approx.WireGauge


Min. Max.






HX-1000-3-WT-J Whi te 2 ,500 2/0 to 0.950" dia. 0 .450 (11 .4 ) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) 0.035 (0 .9) ± 0 .005 (0.1) 3.000 (76.2) PR Plus R4300/ R6602






Catalog # Color

SleevesPerRoll

Approx.WireGauge


Min. Max.





2HX-750-2-WT White 250 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.374 (9.5) 0.030 (0.8) ± 0.003 (0.07) 2.000 (50.8) PR Plus, BBP72 R4300/ R6602

2HX-750-2-WT-2 White 250 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.374 (9.5) 0.030 (0.8) ± 0.003 (0.07) -- PR Plus, BBP72 R4300/ R6602

2HX-750-2-WT-S White 100 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.374 (9.5) 0.030 (0.8) ± 0.003 (0.07) 2.000 (50.8) PR Plus, BBP72 R4300/ R6602

2HX-750-2-WT-J White 2,500 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.374 (9.5) 0.030 (0.8) ± 0.003 (0.07) 2.000 (50.8) PR Plus, BBP72 R4300/ R6602

2HX-750-2-WT-J-** White 2,500 2 to 4/0 0.375 (9.5) - 0.700 (17.8) 0.750 (19.0) 0.374 (9.5) 0.030 (0.8) ± 0.003 (0.07) -- PR Plus, BBP72 R4300/ R6602

2HX-1000-2-WT Whi te 250 2/0 to 0.950" dia. 0 .450 (11 .4) - 0.950 (24.1 ) 1.000 (25.4 ) 0.500 (12.7) 0 .035 (0.9) ± 0.005 (0.1) 2.000 (50.8) PR Plus Pr in te r R4300/ R6602

2HX-1000-2-WT-** White 250 2/0 to 0.950" dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) 0.035 (0.9) ± 0.005 (0.1) -- PR Plus Printer R4300/ R6602

2HX-1000-2-WT-S White 100

Date post:	05-Jul-2018
Category:	Documents
Upload:	many2k
View:	223 times
Download:	0 times

Brady Heatshrinklabel

Documents