BREATHER PLUGS
BHA
FFP PRODUCTS ( HYDRAULICS DIVISION )
17,SAI NIKETAN, CHANDAVARKAR LANE, BORIVALI WEST,MUMBAI 400 092, MAHARASHTRA, INDIATel: +91 22 28925607 Fax: +91 22 28904071e-mail: [email protected] - http://www.ffpproducts.com
FFP PRODUCTS ( HYDRAULICS DIVISION )
17,SAI NIKETAN, CHANDAVARKAR LANE, BORIVALI WEST,MUMBAI 400 092, MAHARASHTRA, INDIATel: +91 22 28925607 Fax: +91 22 28904071e-mail: [email protected] - http://www.ffpproducts.com
BREATHER PLUGS
BHA
FTCF/Z SERIES BREATHER PLUG
SPECIFICATION
Threaded plug with knurled round head forhand tightening.Hole for venting internal pressure.
APPLICATION
For use only on upper cranckcase and awayfrom moving parts.For application requiring normal tight sealing.
PART NO
FTCF/Z0GFTCF/Z1GFTCF/Z2GFTCF/Z3GFTCF/Z4GFTCF/Z5GFTCF/Z6GFTCF/Z7GFTCF/Z8GFTCF/Z0MFTCF/Z1MFTCF/Z2MFTCF/Z3MFTCF/Z4MFTCF/Z5MFTCF/Z6MFTCF/Z7MFTCF/Z8M
THREADS
1/8”1/4”3/8”1 /2”3/4”1”
1.1/4”1.1/2”
2”M10 x 1
M14 x 1.5M16 x 1.5M18 x 1.5M20 x 1.5M22 x 1.5M24 x 2M30 x 2M33 x 2
h
121212152020202020121212121515152020
f
88
1010121415151788
10101010121214
d
202226304045555570202226263030364245
FTCF SERIES BREATHER PLUG
SPECIFICATION
Hole for venting internal pressure.
APPLICATION
For use only on upper cranckcase and awayfrom moving parts.For application requiring normal tight sealing.
PART NO
FTCF0GFTCF1GFTCF2GFTCF3GFTCF4GFTCF5GFTCF6GFTCF7GFTCF8GFTCF0MFTCF1MFTCF2MFTCF3MFTCF4MFTCF5MFTCF6MFTCF7MFTCF8MFTCF9MFTCF10MFTCF11MFTCF12M
THREADS
1/8”1/4”3/8”1 /2”3/4”1”
1.1/4”1.1/2”
2”M10 x 1
M14 x 1.5M16 x 1.5M18 x 1.5M20 x 1.5M22 x 1.5M24 x 2
M26 x 1.5M30 x 2M33 x 2M42 x 3M48 x 3M60 x 4
t
567788
1010125677778888
101012
f
88
1010121415151788
1010101012121214151517
e
14172227324050557014172222242730323640505570
DIMENSIONS:
DIMENSIONS:
FFP PRODUCTS ( HYDRAULICS DIVISION )
17,SAI NIKETAN, CHANDAVARKAR LANE, BORIVALI WEST,MUMBAI 400 092, MAHARASHTRA, INDIATel: +91 22 28925607 Fax: +91 22 28904071e-mail: [email protected] - http://www.ffpproducts.com
BREATHER PLUGS
BHA
FTCFS SERIES BREATHER PLUG
SPECIFICATION
Hex head and spherical bronze filter.Filtration of 40 microns.
APPLICATION
For use only on upper cranckcase and awayfrom moving parts.For application running in dusty enviromentand very small ecumbarance.
PART NO
FTCS1GFTCS2GFTCS3GFTCS4GFTCS5GFTCF1MFTCF2MFTCF3MFTCF4MFTCF5M
THREADS
1/4”3/8”1 /2”3/4”1”
M14 x 1.5M16 x 1.5M18 x 1.5M20 x 1.5M22 x 1.5
t
6778867777
e
17222732401722222427
DIMENSIONS:
f
89
121416899
1212
FTCSF/Z SERIES BREATHER PLUG
PART NO
FTCSF/Z1GFTCSF/Z2GFTCSF/Z3GFTCSF/Z4GFTCSF/Z5GFTCSF/Z6GFTCSF/Z7GFTCSF/Z8GFTCSF/Z1MFTCSF/Z2MFTCSF/Z3MFTCSF/Z4MFTCSF/Z5MFTCSF/Z6MFTCSF/Z7MFTCSF/Z8M
THREADS
1/4”3/8”1 /2”3/4”1”
1.1/4”1.1/2”
2”M14 x 1.5M16 x 1.5M18 x 1.5M20 x 1.5M22 x 1.5M24 x 2M30 x 2M33 x 2
h
12121520202020201212121515152020
f
81012
13.5141616178
10101212
13.51414
d
22263040455555702226263030364245
DIMENSIONS:
SPECIFICATION
Threaded plug with knurled round head forhand tightening.Spherical bronze filter.Filteration of 40 microns.
APPLICATION
For use only on upper cranckcase and awayfrom moving parts.For application requiring normal tight sealing.Fou use in dusty enviroment and hydraulic units.
FFP PRODUCTS ( HYDRAULICS DIVISION )
17,SAI NIKETAN, CHANDAVARKAR LANE, BORIVALI WEST,MUMBAI 400 092, MAHARASHTRA, INDIATel: +91 22 28925607 Fax: +91 22 28904071e-mail: [email protected] - http://www.ffpproducts.com
BREATHER PLUGS
BHA
FTSFO/R SERIES BREATHER PLUG
SPECIFICATION
Galvanized steel cover.Large internal chamber with o-ring.
APPLICATION
For use only on upper cranckcase and awayfrom moving parts.For use in agricultural and earth moving m/c.For use where strong sloshing of fluids.
PART NO
FTSFO/R0GFTSFO/R1GFTSFO/R2GFTSFO/R3GFTSFO/R4GFTSFO/R5GFTSFO/R0MFTSFO/R1MFTSFO/R2MFTSFO/R3MFTSFO/R4MFTSFO/R5M
THREADS
1/8”1/4”3/8”1 /2”3/4”1”
M10 x 1M14 x 1.5M16 x 1.5M18 x 1.5M20 x 1.5M22 x 1.5
d
212124303038212124303030
h
212123262429212123262626
e
171720273240171720272727
DIMENSIONS:
f
889
101214889
101010
FTSS SERIES BREATHER PLUG
SPECIFICATION APPLICATION
For use only on upper cranckcase and awayfrom moving parts.For application requiring normal tight sealing.Fou use in speed shift gears,agricultural over gears and speed reduction gear boxes..
Galvanized steel cover.Large internal chamber with o-ring.Pressure valve set at 0.05 to 0.10 bar.
PART NO
FTSS0GFTSS1GFTSS2GFTSS3GFTSS4GFTSS5GFTSS0MFTSS1MFTSS2MFTSS3MFTSS4MFTSS5MFTSS6MFTSS7MFTSS8M
THREADS
1/8”1/4”3/8”1 /2”3/4”1”
M10 x 1M14 x 1.5M16 x 1.5M18 x 1.5M20 x 1.5M22 x 1.5M24 x 2M30 x 2M33 x 2
d
16.516.522263038
16.516.522222426303038
h
161719202429161719192020242529
e
141722273240141722222427303640
DIMENSIONS:
f
89111112148911111111121414
FFP PRODUCTS ( HYDRAULICS DIVISION )
17,SAI NIKETAN, CHANDAVARKAR LANE, BORIVALI WEST,MUMBAI 400 092, MAHARASHTRA, INDIATel: +91 22 28925607 Fax: +91 22 28904071e-mail: [email protected] - http://www.ffpproducts.com
BREATHER PLUGS
BHA
FTSF SERIES BREATHER PLUG
SPECIFICATION
Galvanized steel cover.Large internal chamber with o-ring.Spherical bronze filter of 40 microns filteration.
APPLICATION
For use only on upper cranckcase and awayfrom moving parts.For use in dusty enviroment and hydraulic units and cylinders.
PART NO
FTSF1GFTSF2GFTSF3GFTSF4GFTSF5GFTSF6GFTSF7GFTSF8GFTSF1MFTSF2MFTSF3MFTSF4MFTSF5MFTSF6MFTSF7MFTSF8MFTSF9MFTSF10MFTSF11M
THREADS
1/4”3/8”1 /2”3/4”1”
1.1/4”1.1/2”
2”M14 x 1.5M16 x 1.5M18 x 1.5M20 x 1.5M22 x 1.5M24 x 2M30 x 2M33 x 2M42 x 3M48 x 3M60 x 4
d
16.522263038505570
16.522222426303038505570
h
17192124293335401719192121242529333540
e
17222732405055701722222427303640505570
f
8101214161616168
10101212121416161616
FTSFA SERIES BREATHER PLUG
SPECIFICATION APPLICATION
For use only on upper cranckcase and awayfrom moving parts.For application requiring normal tight sealing.Fou use in motor fields.
Galvanized steel cover.Large internal chamber with o-ring.Spherical bronze filter of 40 microns filtration.
PART NO
FTSFA0GFTSFA1GFTSFA2GFTSFA3GFTSFA4GFTSFA5GFTSFA0MFTSFA1MFTSFA2MFTSFA3MFTSFA4MFTSFA5MFTSFA6MFTSFA7MFTSFA8MFTSFA9M
THREADS
1/8”1/4”3/8”1 /2”3/4”1”
M10 x 1M12 x 1.5M14 x 1.5M16 x 1.5M18 x 1.5M20 x 1.5M22 x 1.5M24 x 1.5M26 x 1.5M30 x 1.5
d
16.516.522263038
16.516.516.522222426303030
h
16171920242916171719192020242425
e
14172227324014171722222427303236
DIMENSIONS:
f
881111121488811111111121214
FFP PRODUCTS ( HYDRAULICS DIVISION )
17,SAI NIKETAN, CHANDAVARKAR LANE, BORIVALI WEST,MUMBAI 400 092, MAHARASHTRA, INDIATel: +91 22 28925607 Fax: +91 22 28904071e-mail: [email protected] - http://www.ffpproducts.com
BREATHER PLUGS
BHA
FTSFT/N SERIES BREATHER PLUG
SPECIFICATION
Galvanized steel cover.Large internal chamber with labyrynth andperpendicular cut.No oil spattering.
APPLICATION
For use only on upper cranckcase and awayfrom moving parts.For use in dusty enviroment and reduction gears,geared motors, speed variators and gearshift boxes.
PART NO
FTSFT/N1GFTSFT/N2GFTSFT/N3GFTSFT/N4GFTSFT/N5GFTSFT/N6GFTSFT/N7GFTSFT/N8GFTSFT/N1MFTSFT/N2MFTSFT/N3MFTSFT/N4MFTSFT/N5MFTSFT/N6MFTSFT/N7MFTSFT/N8MFTSFT/N9MFTSFT/N10MFTSFT/N11M
THREADS
1/4”3/8”1 /2”3/4”1”
1.1/4”1.1/2”
2”M14 x 1.5M16 x 1.5M18 x 1.5M20 x 1.5M22 x 1.5M24 x 2M30 x 2M33 x 2M42 x 3M48 x 3M60 x 4
d
16.522263038505570
16.522222426303038505570
h
23292935434546462329292929354243454646
e
17222732405055701722222427303640505570
f
89
101214151517899
1010121214151517
FTC/F SERIES DRAIN PLUG
SPECIFICATION
Threaded plug with Flanged head forextra tight tightening.Head milling produces crown for extra tight sealing.
APPLICATION
For application requiring extral tight sealing.For use in dusty enviroment and hydraulic units.Resistance to twisting and overheated atmosphere.
PART NO
FTC/F0GFTC/F1GFTC/F2GFTC/F3GFTC/F4GFTC/F5GFTC/F0MFTC/F1MFTC/F2MFTC/F3MFTC/F4MFTC/F5M
THREADS
1/8”1/4”3/8”1 /2”3/4”1”
M10 x 1M14 x 1.5M16 x 1.5M18 x 1.5M20 x 1.5M22 x 1.5
d
142022283240142022262828
t
7889
10.510.5
788899
e
101718222734101718202222
f
8891112
12.58899
1011
