PRINTBIND KB-2000SPERFECT BINDER FOR DIGITAL AND COATED PAPERS
Speci� cations KB-2000SBook size: 60 × 120 mm (min.)
305 × 320 mm (max.)
Spine thickness: 3 sheets 80 gsm (min.)60 mm (max.)
Cover size: 320 × 780 mm (max.)
Cover weight: up to 250 gsm
Books per hour: up to 240/h
Glue pre-heating time: max. 30 minutes
Binding system: Hot Melt
Glue application system: 2 application rollers1 scraper roller
Features: Book or block binding LCD-Display Batch counter Air pump Fume exhauster Dust exhauster Slit (on/o� ) Programmable press time Standby Cabinet
Power supply: 230 V, 50 Hz, 16 A
Dimensions (L × W × H): 1.320 mm × 670 mm × 1.380 mm
Weight: 185 kg
All product and company names mentioned are registered trademarks of their respective owners. As part of our continuous product improvement program, speci� cations are subject to change without notice.
Ing. Fritz SchroederGmbH & Co. KGHanskampring 622885 Barsbüttel Germany
Tel.: +49 (0)40 7360770Fax: +49 (0)40 73607722Email: [email protected]: www.fks-hamburg.de
New dimension forperfect bindingThe perfect system for strong and professional hotmelt gluebinding of a large variety of substrates including digital printed sheets. A unique slitting and fanning device allows high levelled contact of glue to all sheets to be bound. Professional multi-layer glue assembly including reverse rotating smoothening roller. Up to 240 books can be produced per hour.
The system is controlled through a central operaor panel. The binding process runs fully automatic by simply pressing the “Start + Go” button. No special skilled operator is necessary. A fume exhauster is integrated and can be connected with a § exible hose to any outlet.
The innovative spine processing with new powerful slitting and sheet-fanning functions allows the application of glue in close contact to the sheets to be bound. The system does not create any paper waste but a minimum amount of dust. A dust exhauster with bag is factory inbuild. The binding method can be selected for padding or cover binding.
Ref: KB-2000S/v2
The sheets to be bound are hold tight in the clamp of the binding carrier by a pneumatic drive system. The clamp moves across the slitting/fanning device (on/o� selectable) and trhough the glue assembly into the cover-clamp section.
A pneumatic driven cover attachment and sidepressing � nishes the book with professional appearance. The cover attachment can be set up in relation to the spine thickness and the substrate of cover. The pneumatic system is running absolutely silent.
Your local dealer/distributor: