Date post: | 30-May-2015 |
Category: |
Documents |
Upload: | procraftasia |
View: | 151 times |
Download: | 0 times |
InstructionWall Graphic Transfer
Wipe the wall or intended surface with a clean damp cloth to assure that it is clean and free of grease. When the wall is clean use a sponge with plenty of water and make the wall wet. The wetter the wall is the easier the Wall Graphic Transfer will release.
Face the colored side of the Wall Graphic Transfer sheet to-wards the wall. You can use the black outline printed on the back of the sheet to help you position the transfer correctly. If the Wall Graphic Transfer touches the wall, you can gently remove and reposition it, as long as no pressure has been applied and there is enough water on the wall.
Once you determine the desired placement, press the Wall Graphic Transfer sheet firmly against the wall using a rubber or foam roller. Use a sponge with plenty of water and make the back of the Wall Graphic Transfer wet untill the paper changes color.
Now use a rubber or foam roller to the outside of the transfer so you get rid of the water that is under the paper. Wait 1 minute. Now gently peel back one corner of the paper from the wall. Make sure to check that Wall Graphic Transfer is set. If not, use the sponge one more time to wet the back of the Wall Graphic. After one hour, use a wet sponge on the edges to attach the Wall Graphic firmly to the wall.
Technichal specifications:Product size: 16x35 cm
MeasurementsEndcap: 1x2.20 meterPackage size: 150x200 cm
1635017
1635017
1635003
1635001
1635004
1635002
1635005
Product size: 16x35 cm
1635028
1635028
1635008
1635006
1635009
1635007
1635010
Product size: 16x35 cm
1635024
1635024
1635014
1635012
1635015
1635013
1635016
Product size: 16x35 cm
1635027
1635027
1635021
1635018
1635022
1635019
1635023
Product size: 16x35 cm
Article TLG-541777
1635027
1635021
1635018
1635022
1635019
1635023
Product size: 16x35 cm
Click here
Article TLG-541777
1635032
1635032
Product size: 16x35 cm