Home >Documents >BURNERS, BOOSTERS & SPARES - Western Automation TFI 712-1/TFI 712/TFI 812 10 TFI 812.2 10 Long...

BURNERS, BOOSTERS & SPARES - Western Automation TFI 712-1/TFI 712/TFI 812 10 TFI 812.2 10 Long...

Date post:11-Mar-2020
Category:
View:10 times
Download:0 times
Share this document with a friend
Transcript:
  • 1

    B U

    R N

    E R

    S , B

    O O

    S T E

    R S

    & S

    P A

    R E

    S

    16 Contact your local sales offi ce for additional products from this range. ‘Terms of Business’ applies, a copy of which is available on request. E&OE - Although we strive to keep this document as accurate as possible, we cannot be held responsible for any errors and omissions.

    Contents Manufacturer Page No

    Boosters Nu-Way 16.2 Secomak 16.2

    Burners Satronic 16.3 Nu-Way 16.4 Riello 16.4

    Burner Spares Honeywell 16.5 Dungs 16.6 Black Teknigas 16.6 RWC 16.6

    16 B

    U R

    N E

    R S

    , B

    O O

    S T E

    R S

    &

    S P

    A R

    E S

  • 2 16

    B U

    R N

    E R

    S , B

    O O

    S T E

    R S

    & S

    P A

    R E

    S

    Contact your local sales offi ce for additional products from this range. ‘Terms of Business’ applies, a copy of which is available on request. E&OE - Although we strive to keep this document as accurate as possible, we cannot be held responsible for any errors and omissions.

    Gas Boosters A range of gas boosters to lift the gas pressure where less than suitable pressure is available.

    GB Series Description Part No. GB3160 3PH DSB ACO VFC M X18234E GB3500 3PH DSB ACO VFC M X18235F GB3160 Gas Booster 3PH X18249V GB3500 Gas Booster 3PH X18250S GB3160 Booster 3PMULTI-B X18252Q GB3160 Gas Booster 1PH X18257M GB3500 Booster 3PMULTI-B X18258W GB3160 Booster 1PMULTI-B X18259X

    Gas Boosters Purpose-built centrifugal fan powered by an electric motor, providing a pressure lift to the gas supply where the desired operational pressure cannot be achieved by the installation or gas supply alone. This allows sufficient gas pressure to operate Burners, Boilers and CHP’s to operate efficiently and effectively. The centrifugal design gives high performance from their small physical size, occupying less space whilst providing a lower power consumption than equivalent direct drive boosters. Built to British Standard 8487: 2007 & 2013. Inverter driven Gas Boosters also available.

    SGP Series Description Part No. SECOMAK Gas Booster 3PH SGP535-07 535/2 c/w Install Kit SGP535/03 535/5 c/w Install Kit SGP535/05 535/9 c/w Install Kit SGP535/07 540/1+Install Kit+Soft ST SGP540/02-S 540/2+Install Kit+Soft ST SGP540/04-S 540/3+Install Kit+Soft ST SGP540/06-S 576/1 1PH c/w Install Kit SGP576/04 576/1 3PH c/w Install Kit SGP576/06

    Boosters B

    O O

    S T E

    R S

  • 3

    B U

    R N

    E R

    S , B

    O O

    S T E

    R S

    & S

    P A

    R E

    S

    16 Contact your local sales offi ce for additional products from this range. ‘Terms of Business’ applies, a copy of which is available on request. E&OE - Although we strive to keep this document as accurate as possible, we cannot be held responsible for any errors and omissions.

    Burners

    Satronic - Gas & Dual Fuel (Old to New) Chart

    Burner Controllers Old Type Mod. No. Model New Type Mod. No. Model MMI 811 35 MMI 811.1 35

    DMG 971 1 Rewire air proving switch from term 5/7 to terminal 4/7 MMI 811 63 MMI 811.1 63

    DMG 971 3 Rewire air proving switch from term 5/7 to terminal 4/7 MMI 812 23 MMI 812.1 23

    DMG 972 1 Rewire air proving switch from term 5/7 to terminal 4/7 MMI 812.1 23 MMI 962.1 23

    DMG 972 1 Rewire air proving switch from term 5/7 to terminal 4/7 MMI 812 33 MMI 812.1 23

    DMG 972 1 Rewire air proving switch from term 5/7 to terminal 4/7 MMI 812 33 110V MMI 962.1 33 110V MMI 812.1 33 110V MMI 962.1 33 110V MMI 812 63 MMI 812.1 23 Shorter pre-purger

    DMG 973 2 Rewire air proving switch from term 5/7 to term. 4/7, shorter timings MMI 813 23 MMI 813.1 23

    DMG 973 1 Rewire air proving switch from term 5/7 to terminal 4/7 MMI 816 MMI 816.1 MMI 815 5 MMI 815.1 5 Repeating MMI 815 10 MMI 815.1 10 Repeating MMG 810 32 MMG 810.1 32

    DMG 970 01* Rewire air proving switch from term 5/7 to terminal 4/7, ts 3 sec. MMG 810 33 MMG 810.1 33

    DMG 970 01* Rewire air proving switch from term 5/7 to terminal 4/7 MMG 810 43 MMG 810.1 43

    DMG 971 03* Rewire air proving switch from term 5/7 to terminal 4/7 MMG 811 63 MMG 811.1 63

    DMG 971 03* Rewire air proving switch from term 5/7 to terminal 4/7 MMG 811 33 MMG 811.1 33

    DMG 970 01* Rewire air proving switch from term 5/7 to terminal 4/7 MMG 811 63F MMG 811.1 63

    DMG 971 03* Rewire air proving switch from term 5/7 to terminal 4/7 MMG 816 MMG 816.1 * Must not be used with UVZ 780 MMG 816F MMG 816.1 * Must not be used with UVZ 780 MMG 870 45 MMG 870.1 65 MMG 870 65 MMG 870.1 65

    Burner Controllers Old Type Mod. No. Model New Type Mod. No. Model

    IBR 661 TME 780 New wiring inc/. new base mandatory, change flame detector (rep:UVZE)

    TMG 740-3 New wiring inc/. new base mandatory, change flame detector (rep:UVZ 780)

    GBR 681 DMG 970 1 New wiring inc/. new base mandatory GBR 681/74 DMG 970 1 New wiring inc/. new base mandatory

    TTI 790 MMI 810.1 Fail-safe air pressure switch supervision link between terminal 1 & 9 needed

    TMG 720 TMG 740-3 5 Check for correct UV/Ion switch setting TTG 760 MMG 810.1 TFI 712F-1/TFI 712F/ TFI 812

    5 TFI 812.2 5 Long pre-ignition

    TFI 812.2 5 Without pre-ignition DKG 972 5 Short pre-ignition

    TFI 712-1/TFI 712/TFI 812 10 TFI 812.2 10 Long pre-ignition TFI 812.2 10 Without pre-ignition DKG 972 10 Short pre-ignition

    MMI 810 13 MMI 810.1 13 MMI 810 15 MMI 810.1 13 Safety time 3 sec MMI 810 32 MMI 810.1 33 Safety time 3 sec

    DMG 970 1 Rewire air proving switch from term 5/7 to terminal 4/7, ts 3 sec MMI 810 33 MMI 810.1 33

    DMG 970 1 Rewire air proving switch from term 5/7 to terminal 4/7 MMI 810 33 110V MMI 810.1 33 110V MMI 810 35 MMI 810.1 35

    DMG 970 2 Rewire air proving switch from term 5/7 to terminal 4/7 MMI 810 40-34 MMI 810.1 40-34 MMI 810 43 MMI 810.1 43

    DMG 970 3 Rewire air proving switch from term 5/7 to terminal 4/7 MMI 810/MMI 810.1 45 45 MMI 810.1 43 Safety time 5 sec

    DMG 970 3 Rewire air proving switch from term 5/7 to terminal 4/7, ts 3 sec MMI 810 55 MMI 810.1 55 MMI 810 310 MMI 810.1 35 Safety time 5 sec

    DMG 970 2 Rewire air proving switch from term 5/7 to terminal 4/7, ts 3 sec

    B U

    R N

    E R

    S

  • 4 16

    B U

    R N

    E R

    S , B

    O O

    S T E

    R S

    & S

    P A

    R E

    S

    Contact your local sales offi ce for additional products from this range. ‘Terms of Business’ applies, a copy of which is available on request. E&OE - Although we strive to keep this document as accurate as possible, we cannot be held responsible for any errors and omissions.

    Gas Burners These burners are available for use on natural gas, LPG, towns gas and biogas with single stage on/off, two stage high/low or modulating operation. They are typically suited for commercial hot water boiler systems and steam boiler systems.

    Features and Benefits • Quick and easy installation • Reliable and trouble free operation • Industry standard components available • Most components can be easily accessed allowing for easy maintenance

    MGN Series Description Part No. MGN860 LN T3S 225 Burner 26-36-42013-332 MGN860 LN T3S 325 Burner 26-36-42014-332 MGN1350LN T3S 225 Burner 26-36-42053-332 MGN1350LN T3S 325 Burner 26-36-42054-332 MGN1550LN T3D 250 Burner 26-36-43238-33 MGN2000LN T3D 250SD Burner 26-36-43239-33 MGN1550LN T3D 450 Burner 26-36-43241-33 MGN2000LN T3D 450SD Burner 26-36-43242-33 MGN190 S1L 125 NAT GAS-ON/OFF-1 PH/50HZ 710000171520 MGN190 S1L 225 NAT GAS-ON/OFF-1 PH/50HZ 710000571520 MGN190 T1L 125 NAT GAS-HIGH/LOW-1 PH/50HZ 720000172520 MGN190 T1L 225 NAT GAS-HIGH/LOW-1 PH/50HZ 720001172520 MGN320 S1L 155 NAT GAS-ON/OFF-1 PH/50HZ 730000273520 MGN320 S1L 255 NAT GAS-ON/OFF-1 PH/50HZ 730001073520 MGN320 T1L 155 NAT GAS-HIGH/LOW-1 PH/50HZ 740000274520 MGN320 T1L 255 NAT GAS-HIGH/LOW-1 PH/50HZ 740000474520

    Dual Fuel Burners Dual fuel burners are most commonly used if the fuel source is intermittent. By having both gas and oil fuel options available, it ensures the downtime of the boiler is limited. MDF Series dual fuel burners are suitable for use with natural gas, LPG, town gas, biogas and light oil. They can operate effectively with Two stage high/low gas and oil or fully modulating gas and oil operation.

    Features and Benefits • Quick and easy installation • Reliable and trouble free operation • Industry standard components available • Most components can be easily accessed allowing for easy maintenance

    Full range of Nu-Way burners available. Sterling, 'M' + 'N' Series Oil & Gas - Contact us for full details.

    MDF Series Description Part No. MDFL1510 T3D 296SD Burner 27-36-43501-33 MDFL1510 T3D 496SD Burner 27-36-43505-33 MDFL760 T3D 230 Burner 27-36-43551-332 MDFL1070 T3D 230 Burner 27-36-43552-332 MDFL760 T3D 330 Burner 27-36-43553-332 MDFL1070 T3D 330 Burner 27-36-43554-332

    Burners B

    U R

    N E

    R S

    Gas Burners

    RS Series Description Part No. RS34 MZ TC H/L GAS B 412 3789010-0231 RS34 MZ TC H/L GAS 415 3789010-0232 RS34 MZ H/L GAS BURN 420 3789010-0233 RS34 MZ TL 1PH GAS MB412 3789011.0231 RS44 MZ 1PH GAS B 412 3789110-0231 RS44 MZ 1PH GAS MB415 3789110-0232 RS44 MZ 1PH GAS B/R 420 3789110-0233 RS44 MZ 3PH GAS B/R 412 3789140-0231 RS44 MZ 3PH GAS B/R 415 3789140-0232 RS44 MZ 3PH GAS B/R 420 3789140-0233 RS130M