by

The FRAMECAD Solution

Design Build Solution

Welcome to the future of cold formed steel frame design, manufacturing and building solutions

With FRAMECAD technology and FRAMECAD building products, you can turn architectural inspiration into commercial reality much faster and more cost effectively than ever before.

FRAMECAD Integrated design and Build Solution incorporates the intelligence of FRAMECAD software and FRAMECAD manufacturing solutions, complemented by an international building products supply chain providing steel, cladding, lining, flooring, roofing and building hardware.

FRAMECAD is the world’s most advanced end-to-end steel frame design and manufacturing system, allowing us to mass produce cold formed steel frames with precision and accuracy that is determined by the system, eliminating factory workers or on-site assemblers.

In One Quarter of the Time…

In One Quarter of the Time…

• Pre-fabricated stud wall panels: exterior and interior load bearing, exterior curtain / by-pass walls and interior partitions

• Floor trusses in multitude of depths and spans• Roof trusses in virtually any shape or profile• Blocking trusses• Stud and track material custom cut to length for

applications such as outlookers and soffit framing• Construction of your building in ¼ of the time when

compared to conventional framing

Code Compliance & Specifications

• ICC Certified• Meets all ASTM specifications for Cold Formed Metal Framing

FRAMECAD Code Approvals and Industry Standard Compliance:

Material Features Exclusive to FRAMECAD:• Components are fabricated using 72 ksi steel – exceeds industry

standards of 55 ksi• G90 zinc coating• All fasteners and components used to fabricate finished assemblies

are sourced through FRAMECAD and are specifically designed and tested for use with the FRAMECAD Design and Build System

Design and Engineering

Building Applications

Design and Engineering

• Virtually any commercial, or industrial projects• Low to mid-rise construction; single story – up to eight story structures• Military and Institutional projects• Custom Residential

• All pre-fabricated components produced by the FRAMECAD system are fully engineered

• FRAMECAD is the only system in the industry where the design and engineering software and the equipment are fully integrated and sourced through a single manufacturer

• Engineer sealed shop drawings provided by Douglass Colony for every project. Eliminates the need for the framing contractor to retain an engineer to design and seal shop drawings

3 5/8” Stud Dimensions

6” Stud Dimensions

FRAMECAD®The Product

MENU

Benefits of Light Gauge Steel

The Rocky Mountain Region’s exclusive fabrication

by